↓ Skip to main content

MEMS and Nanotechnology, Volume 2

Overview of attention for book
Cover of 'MEMS and Nanotechnology, Volume 2'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Nanomechanical standards based on the intrinsic mechanics of molecules and atoms
  3. Altmetric Badge
    Chapter 2 Magneto-Mechanical MEMS Sensors for Bio-Detection
  4. Altmetric Badge
    Chapter 3 Recent Progress of Piezoelectric MEMS for Energy Harvesting Devices
  5. Altmetric Badge
    Chapter 4 Performance of Piezoelectric Power Generator in Environmental Conditions
  6. Altmetric Badge
    Chapter 5 Comparison of Transduction Efficiency for Energy Harvester between Piezoelectric Modes
  7. Altmetric Badge
    Chapter 6 Size Effects Associated with Microcompression Experiments on Single-Crystal Magnesium
  8. Altmetric Badge
    Chapter 7 Mechanically probing time-dependent mechanics in metallic MEMS
  9. Altmetric Badge
    Chapter 8 Small mass measurements for tuning fork-based atomic force microscope cantilever spring constant calibration
  10. Altmetric Badge
    Chapter 9 Linear and Nonlinear Mass Sensing Using Piezoelectrically-Actuated Microcantilevers
  11. Altmetric Badge
    Chapter 10 Calibrating Force and Displacement in the Face of Property Variation
  12. Altmetric Badge
    Chapter 11 Standardization of Nanoscale Interfacial Experiments Using MEMS
  13. Altmetric Badge
    Chapter 12 Arrays of Robust Carbon Nanotube-Based NEMS: A Combined Experimental/Computational Investigation
  14. Altmetric Badge
    Chapter 13 Electro-Mechanical Response of Carbon Nanotube Reinforced Polymer Composites
  15. Altmetric Badge
    Chapter 14 A Test Platform for Systematic Investigation of Tribology in MEMS
  16. Altmetric Badge
    Chapter 15 Full Optical Scatter Analysis for Novel Photonic and Infrared Metamaterials
  17. Altmetric Badge
    Chapter 16 Thermal Management and Metamaterials
  18. Altmetric Badge
    Chapter 17 MEMS integrated metamaterial structure having variable resonance for RF applications
  19. Altmetric Badge
    Chapter 18 Characterization and Testing of Adaptive RF Metamaterial Structure Using MEMS
  20. Altmetric Badge
    Chapter 19 Design of a microfluidic pump, based on conducting polymers
  21. Altmetric Badge
    Chapter 20 Micromotor Fabrication by Surface Micromachining Technique.
  22. Altmetric Badge
    Chapter 21 Improvement of Piezoresistive Microcantilever Beams for Gas Detection and Sensing
  23. Altmetric Badge
    Chapter 22 Investigation of the Young’s Modulus of Fibers in an Electrospun PCL Scaffold Using AFM and its Correlation to cell Attachment
  24. Altmetric Badge
    Chapter 23 Recent Progress in E-Beam Lithography for SEM Patterning
  25. Altmetric Badge
    Chapter 24 Analysis of Scattering-type Scanning Near-field Optical Microscopy for Residual-strain Measurements
  26. Altmetric Badge
    Chapter 25 Experimental Methods for Tensile Testing of Metallic Thin Films at High Temperatures
  27. Altmetric Badge
    Chapter 26 Surface Texturing Using Gold Nanoparticles to Reduce Adhesion in MEMS
  28. Altmetric Badge
    Chapter 27 Design of Microswitch Systems Avoiding Stiction due to Surface Contact
  29. Altmetric Badge
    Chapter 28 Measurement of adhesive force between two mica surfaces with multiple beam interferometry
  30. Altmetric Badge
    Chapter 29 Performance Studies of A Prototypical MEMS Thermal Actuator
  31. Altmetric Badge
    Chapter 30 A New Electrothermal Microactuator with Z-shaped Beams
  32. Altmetric Badge
    Chapter 31 Electrothermal Actuators for Integrated MEMS Safe and Arming Devices
  33. Altmetric Badge
    Chapter 32 Contrast Reversal on Surface Plasmon Resonance Reflectivity in Nickel and Nickel Alloy Films
  34. Altmetric Badge
    Chapter 33 Effect of Accelerated Ultra Violet and Thermal Exposure on Nano Scale Mechanical Properties of Nylon Fibers
  35. Altmetric Badge
    Chapter 34 High Thermal Conductivity Polyurethane-Boron Nitride Nanocomposite Encapsulants
  36. Altmetric Badge
    Chapter 35 Advanced hard mask approach of ICs copper interconnects processes integration
  37. Altmetric Badge
    Chapter 36 Advances in Thin Film Nanoindentation
  38. Altmetric Badge
    Chapter 37 Mechanical and Piezoelectric Behavior of Thin Film PZT Composites for MEMS Applications
  39. Altmetric Badge
    Chapter 38 Fracture Between Self-Assembled Monolayers
  40. Altmetric Badge
    Chapter 39 Control and Quantification of Residual Stresses in Anodically Bonded MEMS Structures
  41. Altmetric Badge
    Chapter 40 Sub-micron Scale Mechanical Properties of Polypropylene Fibers Exposed to Ultraviolet and Thermal Degradation
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

blogs
1 blog

Citations

dimensions_citation
9 Dimensions

Readers on

mendeley
100 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
MEMS and Nanotechnology, Volume 2
Published by
Springer New York, March 2011
DOI 10.1007/978-1-4419-8825-6
ISBNs
978-1-4419-8824-9, 978-1-4419-8825-6
Editors

Proulx, Tom

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 100 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United States 2 2%
United Kingdom 1 1%
Italy 1 1%
Spain 1 1%
New Zealand 1 1%
Unknown 94 94%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 29 29%
Student > Master 14 14%
Researcher 12 12%
Student > Bachelor 7 7%
Student > Doctoral Student 5 5%
Other 9 9%
Unknown 24 24%
Readers by discipline Count As %
Engineering 41 41%
Materials Science 18 18%
Physics and Astronomy 6 6%
Chemistry 5 5%
Biochemistry, Genetics and Molecular Biology 1 1%
Other 4 4%
Unknown 25 25%