↓ Skip to main content
What is this page? Embed badge

Advances in Mechanical Engineering

Overview of attention for book
Cover of 'Advances in Mechanical Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Dual Quaternion-Based Kinematic Modelling of Serial Manipulators
  3. Altmetric Badge
    Chapter 2 Performance Analysis of Corrugated Inclined Basin Solar Distillation System Coupled with Parabolic Trough Collector
  4. Altmetric Badge
    Chapter 3 Mechanical Design of Omnidirectional Spherical Wall Traversing Robot
  5. Altmetric Badge
    Chapter 4 Fabrication and Performance Analysis of a Device to Transform Vibration Energy on an Automobile
  6. Altmetric Badge
    Chapter 5 Robust Backstepping Controller for an Omniwheeled Mobile Robot with Uncertainties and External Disturbances
  7. Altmetric Badge
    Chapter 6 Micro-mechanical Analyses of Particle Reinforced ex situ Bulk Metallic Glass Matrix Composites
  8. Altmetric Badge
    Chapter 7 Life Estimation of Circumferentially Notch Round Bars Using J Integral
  9. Altmetric Badge
    Chapter 8 Placement of Heated Blocks Under Forced Convection for Enhanced Heat Transfer
  10. Altmetric Badge
    Chapter 9 Analysis of Track Vibration for Metro Rail
  11. Altmetric Badge
    Chapter 10 Localization of a Four-Wheeled Omnidirectional Mobile Robot Using Sensor Data: A Kalman Filter Approach
  12. Altmetric Badge
    Chapter 11 Capacitated Vehicle Routing Problem with Interval Type-2 Fuzzy Demands
  13. Altmetric Badge
    Chapter 12 Kinematic, Dynamic and Stiffness Analysis of an Asymmetric 2PRP-PPR Planar Parallel Manipulator
  14. Altmetric Badge
    Chapter 13 CFD Analysis for Heat Transfer Enhancement of Microchannels Heat Sink Using Nanofluid Flow in Case of Electronics Device
  15. Altmetric Badge
    Chapter 14 Burr Registration and Trajectory Planning of 3D Workpiece Using Computer Vision
  16. Altmetric Badge
    Chapter 15 In-situ Microwave-Assisted Casting of ASTM B23 Tin-Based Babbitt Alloy
  17. Altmetric Badge
    Chapter 16 Optimization of Heat Transfer Behavior of Industrial Refrigerants Through Different Cross-Section Microchannels
  18. Altmetric Badge
    Chapter 17 Evaluation of Two-Body Abrasive Wear Using FIS and ANN
  19. Altmetric Badge
    Chapter 18 Computational Analysis of Dual Expander Aerospike Nozzle
  20. Altmetric Badge
    Chapter 19 A Study on Performance and Emission Characteristics of Diesel Engine for Lower Blends of Karanja Biodiesel
  21. Altmetric Badge
    Chapter 20 Experimental Comparison Between Friction Stir Welding and Underwater Friction Stir Welding on Al6061 Alloys
  22. Altmetric Badge
    Chapter 21 Wear Particle Analysis Using Fractal Techniques
  23. Altmetric Badge
    Chapter 22 Strategies for Low Engine Speed Torque Enhancement of Natural Gas Engine Used for Commercial Vehicles: Observations with Compression Ratio
  24. Altmetric Badge
    Chapter 23 In-house Fabrication and Calibration of Silver Thin Film Gauge
  25. Altmetric Badge
    Chapter 24 Study of Shock Wave Boundary Layer Interaction in Hypersonic Flows Using Various Turbulence Models
  26. Altmetric Badge
    Chapter 25 Study of Effect on Engine Performance Using 15% HCNG Blend Versus CNG Using a Simulation Approach
  27. Altmetric Badge
    Chapter 26 Behaviour of NiTi Based Smart Actuator for the Development of Planar Parallel Micro-Motion Stage
  28. Altmetric Badge
    Chapter 27 Multi-objective Optimization of Inconel 718 Using Combined Approach of Taguchi—Grey Relational Analysis
  29. Altmetric Badge
    Chapter 28 The Effect of State Variables on Nucleation of Earthquake Using the Rate and State Friction
  30. Altmetric Badge
    Chapter 29 Finite Element Analysis of Type I and Type II Fracture with PFN Implant—A Comparative Study
  31. Altmetric Badge
    Chapter 30 Postural Evaluation of Construction Labourers Engaged in Excavation Work Using Newly Developed NERPA Method and Its Validation Through REBA and WERA Methods
  32. Altmetric Badge
    Chapter 31 Influence of Stress Bar Length on the Response of a Stress Wave Force Balance Using Finite Element Analysis
  33. Altmetric Badge
    Chapter 32 Relative Power Variation in Frequency Sub-bands of the EEG Signal During Painful Stimuli
  34. Altmetric Badge
    Chapter 33 A Study on the Effect of GTAW Input Current on Surface Distortion of Thin CRNO Electrical Steel Sheets
  35. Altmetric Badge
    Chapter 34 Heat Transfer and Pressure Drop Inside Duct with Different Surface Profiles
  36. Altmetric Badge
    Chapter 35 A Hybrid Process Monitoring Strategy for Steel Making Shop
  37. Altmetric Badge
    Chapter 36 Analysis of Electrolyte Flow in IEG During Electrochemical Grinding of MMC
  38. Altmetric Badge
    Chapter 37 Static Structural Analysis of Roll Cage of an All-Terrain Vehicle
  39. Altmetric Badge
    Chapter 38 Design of Motorcycle Handlebar for Reduction of Vibrations Using Tuned Mass Damper
  40. Altmetric Badge
    Chapter 39 Development of a Diagnostive Tool for Prediction of Severity of Coronary Artery Disease
  41. Altmetric Badge
    Chapter 40 Design, Modelling and Optimization of Artificial Limb for Lower-Extremity Amputees Based on CATIA
  42. Altmetric Badge
    Chapter 41 An Experimental Study on Surface Roughness in Slicing Tungsten Carbide with Abrasive Water Jet Machining
  43. Altmetric Badge
    Chapter 42 Energy Absorption Characteristics of Single and Double-Walled Square Tubes Subjected to Axial Crushing
  44. Altmetric Badge
    Chapter 43 Field Data Analysis Using Work Measurement Techniques in a Packaging Industry
  45. Altmetric Badge
    Chapter 44 Comparative Study of Nanofinishing of Si (100) Using DDMAF and Allied Processes
  46. Altmetric Badge
    Chapter 45 Optimization of Thickness of Hollow Punch–Die for Proposed Solar-Assisted Leaf Plate and Cup Making Machine
  47. Altmetric Badge
    Chapter 46 Development of Briquette Cum Pellet Making Machine
  48. Altmetric Badge
    Chapter 47 Towards the Development of Low-Cost Vacuum Setup for Customized Implant Manufacturing
  49. Altmetric Badge
    Chapter 48 Simulation Study on Effect of Variable Curvature on the Modal Properties of Curved Cantilever Beams
  50. Altmetric Badge
    Chapter 49 Variation in the Properties of Spot Weldments of Cold Rolled Mild Steel Welded with Filler Metal by Annealing Treatment
  51. Altmetric Badge
    Chapter 50 Comparison of Metro Track Vibration with Federal Transit Administration Limits
  52. Altmetric Badge
    Chapter 51 Effect of Moisture Content and Fiber Orientation on the Mechanical Behavior of GFRP Composites
  53. Altmetric Badge
    Chapter 52 Experimental Investigation and Simulation of Modified Evaporative Cooling System
  54. Altmetric Badge
    Chapter 53 Effects of Different Vegetable Oils and Additives in Gearbox Operation and its Condition Monitoring
  55. Altmetric Badge
    Chapter 54 Study and Analysis of Various Parameters of Bio-mechanization Plant
  56. Altmetric Badge
    Chapter 55 Robust Sliding Mode Controller (RSMC) for an Omniwheeled Mobile Robot with Uncertainties and External Perturbations
  57. Altmetric Badge
    Chapter 56 The CFD Analysis of Convection Heat Transfer with Magnetic Field in the 2D Domain Using OpenFOAM
  58. Altmetric Badge
    Chapter 57 Design of a Remote Racking Module for Racking Operation
  59. Altmetric Badge
    Chapter 58 A Coupled Heat Transfer and Artificial Neural Network Based Model for Accelerated Direct Cooling of Steel Plate
  60. Altmetric Badge
    Chapter 59 Effect of Air Distribution on Cooling of Photovoltaic Panel and Its Performance
  61. Altmetric Badge
    Chapter 60 Numerical Investigations of Photovoltaic Phase Change Materials System with Different Inclination Angles
  62. Altmetric Badge
    Chapter 61 Edge Feature Based Classification of Breast Thermogram for Abnormality Detection
  63. Altmetric Badge
    Chapter 62 Analytical Approach to Develop a Robust Mechanism for On-Orbit Gimballing of Satellite Antenna
  64. Altmetric Badge
    Chapter 63 Impact of Rock Abrasivity on TBM Cutter-Discs During Tunnelling in Various Rock Formations
  65. Altmetric Badge
    Chapter 64 Tool Condition Prediction Using Acoustic Signal Processing and Learning-Based Methods
  66. Altmetric Badge
    Chapter 65 Finite Element Simulation of Ballistic Response of Metallic Sandwich Structures with Aluminium Foam Core
  67. Altmetric Badge
    Chapter 66 Crushing Behavior of Thick Circular High Strength Aluminum Tube Against Quasi-static Axial Loading
  68. Altmetric Badge
    Chapter 67 Estimation of Burr Dimensions Using Image Processing for Robotic Deburring
  69. Altmetric Badge
    Chapter 68 Study of Structural and Mechanical Behaviour of Severe Plastically Deformed Al–Mg(AA 5052) Alloy Processed by Constrained Groove Pressing Technique
  70. Altmetric Badge
    Chapter 69 Shear Rate Dependent Frictional Behavior of the Granular Layer
  71. Altmetric Badge
    Chapter 70 Mathematical Overview on Omnidirectional Spherical Wall Traversing Robot
  72. Altmetric Badge
    Chapter 71 Finite Element Analysis of Ballistic Impact on Monolithic and Multi-layered Target Plate with and Without Air Gap
  73. Altmetric Badge
    Chapter 72 Additive Manufacturing Process Selection Using MCDM
  74. Altmetric Badge
    Chapter 73 Evaluation and Improvement of Makespan Time of Flexible Job Shop Problem Using Various Dispatching Rules—A Case Study
  75. Altmetric Badge
    Chapter 74 The Impact of Building Orientation on Microhardness and Surface Roughness of Direct Metal Laser Sintered Inconel Alloy
  76. Altmetric Badge
    Chapter 75 Investigation on Elevated Temperature Tribological Performance of Alloy 718
  77. Altmetric Badge
    Chapter 76 Digital Twin for Shell and Tube Heat Exchanger in Industry 4.0
  78. Altmetric Badge
    Chapter 77 Model-Based Synchronized Control of a Robotic Dual-Arm Manipulator
  79. Altmetric Badge
    Chapter 78 Prioritizing the Travelling Criteria for Customer-Centric Business Model of Public Transport System
  80. Altmetric Badge
    Chapter 79 Effect of Friction Stir Processing on the Sliding Wear Characteristics of AZ91 Mg Alloy
  81. Altmetric Badge
    Chapter 80 Effect of Varying Ιn-Plane Loads and Cutout Size on Buckling Behavior of Laminated Panels
  82. Altmetric Badge
    Chapter 81 Effect of Machining Parameters on Surface Roughness and Tool Flank Wear in Turning of Haynes 25 Alloy
  83. Altmetric Badge
    Chapter 82 Performance Appraisal of Cryogenically Treated Tool in Dry, MQL and Cryogenic Machining of Inconel 718
  84. Altmetric Badge
    Chapter 83 Finite Element Simulation for Turning of Haynes 25 Super Alloy
  85. Altmetric Badge
    Chapter 84 Optimization of Machining Parameters for Turning of Haynes 25 Cobalt-Based Superalloy
  86. Altmetric Badge
    Chapter 85 A Compact Hinge Mechanism for Radial Rib Antenna
  87. Altmetric Badge
    Chapter 86 Suntracker on Rocker-Bogie Mechanism
  88. Altmetric Badge
    Chapter 87 Market Basket Analysis: Case Study of a Supermarket
  89. Altmetric Badge
    Chapter 88 Experimental Investigation of Effect of Nanoparticle Concentration on Thermo-physical Properties of Nanofluids
  90. Altmetric Badge
    Chapter 89 A Framework for Robot Programming via Imitation
  91. Altmetric Badge
    Chapter 90 Optimizing EDM Parameters for Machining Cu102 and Finding Regression Equation of MRR and Surface Finish
  92. Altmetric Badge
    Chapter 91 Multidisciplinary Solution Avenues in Mechanical Engineering
  93. Altmetric Badge
    Chapter 92 OLSAC: Open-Source Library for Swarm Algorithms and Communication
  94. Altmetric Badge
    Chapter 93 Development of Crank–Connecting Rod Attachment for Electric Discharge Machining of Curved Holes
  95. Altmetric Badge
    Chapter 94 Effect of Crack Angle on Stress Shielding in Bone and Orthopedic Fixing Plate Implant: Design and Simulation
  96. Altmetric Badge
    Chapter 95 IoT-Based Ambiance Monitoring System
  97. Altmetric Badge
    Chapter 96 Hand Gesture Control of Computer Features
  98. Altmetric Badge
    Chapter 97 Industry 4.0 Applications in Agriculture: Cyber-Physical Agricultural Systems (CPASs)
  99. Altmetric Badge
    Chapter 98 Person Following Mobile Robot Using Multiplexed Detection and Tracking
  100. Altmetric Badge
    Chapter 99 Sliding Wear Characteristics of Silver Particles Incorporated Electroless Nickel Phosphorus Composite Coatings
  101. Altmetric Badge
    Chapter 100 Investigations on Engine Emission Using Biodiesel with Different Compression Ratios
  102. Altmetric Badge
    Chapter 101 Investigation of Thermal Desalination System Using Heat Recovery
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
2 X users
wikipedia
1 Wikipedia page

Citations

dimensions_citation
7 Dimensions
Summary X Wikipedia Dimensions citations
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Mechanical Engineering
Published by
Springer Singapore, May 2020
DOI 10.1007/978-981-15-3639-7
ISBNs
978-9-81-153638-0, 978-9-81-153639-7
Editors

Kalamkar, Vilas R., Monkova, Katarina

View on publisher site
X Demographics

X Demographics

The data shown below were collected from the profiles of 2 X users who shared this research output. Click here to find out more about how the information was compiled.

This page is provided by Altmetric.