↓ Skip to main content
What is this page? Embed badge

Proceedings of IncoME-VI and TEPEN 2021

Overview of attention for book
Cover of 'Proceedings of IncoME-VI and TEPEN 2021'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 An Optical Gyroscope Based Technique for Calibrating Angular-Measuring Instrument
  3. Altmetric Badge
    Chapter 2 Data Analysis for Predictive Maintenance Using Time Series and Deep Learning Models—A Case Study in a Pulp Paper Industry
  4. Altmetric Badge
    Chapter 3 Reinforcement Learning Fault Diagnosis Method Based on Less Tag Data
  5. Altmetric Badge
    Chapter 4 Optimization Design and Simulation Analysis of Miniature Boring Machine Based on ADAMS
  6. Altmetric Badge
    Chapter 5 The Stability and Vibration Characteristic Optimization of the Pressure Shell of a Buoyancy Regulator of an Underwater Vehicle
  7. Altmetric Badge
    Chapter 6 Emulational and Experimental Research on a Sugarcane Field Excitation Device
  8. Altmetric Badge
    Chapter 7 Experimental Research on Influence Factors of the Sugarcane Ratoon Cutting Quality Under Vibration Conditions
  9. Altmetric Badge
    Chapter 8 Research on the Influence of Changes in Particle Sizes on Simulation Results in the Simulation Test Based on the Discrete Element Method
  10. Altmetric Badge
    Chapter 9 Wind Turbine Condition Monitoring Based on SCADA Data Co-integration Analysis
  11. Altmetric Badge
    Chapter 10 Improvement and Application of YOLOv3 for Smartphone Glass Cover Defect Detection
  12. Altmetric Badge
    Chapter 11 Optimization and Design of Efficiency and Quality of a Company Based on Value Stream Analysis
  13. Altmetric Badge
    Chapter 12 Review of Using Operational Modal Analysis for Condition Monitoring
  14. Altmetric Badge
    Chapter 13 Vibration Analysis of the Rudder Drive System of an Underwater Glider
  15. Altmetric Badge
    Chapter 14 Online Method for Assessment and Tracking of Wear in Kaplan Turbine Runner Blades Operating Mechanism
  16. Altmetric Badge
    Chapter 15 Bearing Fault Diagnosis Based on Improved Residual Network
  17. Altmetric Badge
    Chapter 16 Study on Optimization and Improvement of Production Line of H Product
  18. Altmetric Badge
    Chapter 17 Towards Data Driven Dynamical System Discovery for Condition Monitoring a Reciprocating Compressor Example
  19. Altmetric Badge
    Chapter 18 Rolling Bearing Remaining Useful Life Prediction Based on LSTM-Transformer Algorithm
  20. Altmetric Badge
    Chapter 19 Research and Application of Order Analysis Technology Without Tachometer Under Variable Speed Condition
  21. Altmetric Badge
    Chapter 20 Simulation Analysis of Tooth Surface Wear Considering Axis Parallelism Error
  22. Altmetric Badge
    Chapter 21 A TFG-CNN Fault Diagnosis Method for Rolling Bearing
  23. Altmetric Badge
    Chapter 22 A Gas Turbine Gas Path Digital Twin Modeling Method
  24. Altmetric Badge
    Chapter 23 Small Sample MKFCNN-LSTM Transfer Learning Fault Diagnosis Method
  25. Altmetric Badge
    Chapter 24 Prediction of Sensor Values in Paper Pulp Industry Using Neural Networks
  26. Altmetric Badge
    Chapter 25 YOLOV4-Based Wind Turbine Blade Crack Defect Detection
  27. Altmetric Badge
    Chapter 26 State-of-Art of Metal Debris Detection in Online Oil Monitoring
  28. Altmetric Badge
    Chapter 27 Regression Prediction of Performance Parameters in Ship Propulsion Equipment Simulation Model Based on One-Dimensional Convolutional Neural Network
  29. Altmetric Badge
    Chapter 28 Research on Numerical Simulation Study of Solidification Heat Transfer Coefficient of Extra-Wide Slab
  30. Altmetric Badge
    Chapter 29 Numerical Study of Motor Electrical Signature for Condition Monitoring of Gear Tooth Breakage in a Motor-Gear System
  31. Altmetric Badge
    Chapter 30 Analysing the Fault Behavior of a Complex Mechanical System for Diagnosis: A Bond Graph-Based Approach
  32. Altmetric Badge
    Chapter 31 Dynamic Responses of Clearance Induced Impacts in Big End Bearing Condition Monitoring of Diesel Engines
  33. Altmetric Badge
    Chapter 32 Impeller Wear Diagnosis in Centrifugal Pumps Under Different Flow Rate Based on Acoustic Signal Analysis
  34. Altmetric Badge
    Chapter 33 Fault Diagnosis for Gas Turbine Rotor Using MOMEDA-VNCMD
  35. Altmetric Badge
    Chapter 34 Classification and Recognition Method of Bearing Fault Based on SDP-CNN
  36. Altmetric Badge
    Chapter 35 Spindle Health Assessment Based on Rotor Perception
  37. Altmetric Badge
    Chapter 36 Fault Diagnosis of Rolling Bearing Based on Wavelet Packet Decomposition and SVM-LMNN Algorithm
  38. Altmetric Badge
    Chapter 37 Fine-Tuning and Efficient VGG16 Transfer Learning Fault Diagnosis Method for Rolling Bearing
  39. Altmetric Badge
    Chapter 38 An Investigation of Unsupervised Data-Driven Models for Internal Combustion Engine Condition Monitoring
  40. Altmetric Badge
    Chapter 39 Online Pipe Leakage Detection Using the Vibration-Based Wireless Sensing System
  41. Altmetric Badge
    Chapter 40 Meta-Learning Guided Few-Shot Learning Method for Gearbox Fault Diagnosis Under Limited Data Conditions
  42. Altmetric Badge
    Chapter 41 Investigation into LSTM Deep Learning for Induction Motor Fault Diagnosis
  43. Altmetric Badge
    Chapter 42 Degradation Trend Construction of Aircraft Engine Using Complex Network Model
  44. Altmetric Badge
    Chapter 43 Research on the Influence of Mesh Stiffness of Fixed Gearbox with Chipping Fault
  45. Altmetric Badge
    Chapter 44 Damage Diagnosis of Railway Vehicle Car Body Based on Strain Modes
  46. Altmetric Badge
    Chapter 45 A Chip Defect Detection System Based on Machine Vision
  47. Altmetric Badge
    Chapter 46 A Bayesian Probabilistic Score Matrix Based Collaborative Filtering Recommendation System for Rolling Bearing Fault Identification
  48. Altmetric Badge
    Chapter 47 On-Line Monitoring of the Dimensional Error in Turning of a Slender Shaft
  49. Altmetric Badge
    Chapter 48 Research on Feature Extraction and Recognition of Dongba Hieroglyphs
  50. Altmetric Badge
    Chapter 49 Study on Feature Extraction of Gearbox Vibration Signal for Wind Turbines
  51. Altmetric Badge
    Chapter 50 Condition Monitoring of a Reciprocating Air Compressor Using Vibro-Acoustic Measurements
  52. Altmetric Badge
    Chapter 51 Application of Combined Normalized Least Mean Square and Ensemble Empirical Mode Decomposition Denoising Method in Fault Diagnosis of Rolling Bearings
  53. Altmetric Badge
    Chapter 52 Rolling Bearing Fault Diagnosis Based on Weighted Variational Mode Decomposition and Cyclic Spectrum Slice Energy
  54. Altmetric Badge
    Chapter 53 Nonlinear Dynamic Analysis of a Planetary Gear System with Sun Gear Fault
  55. Altmetric Badge
    Chapter 54 A Fault Diagnosis Method for Rolling Bearings Based on Improved EEMD and Resonance Demodulation Analysis
  56. Altmetric Badge
    Chapter 55 A Study on the Contact Characteristics of a Planetary Centrifugal Vari-Speed Drive
  57. Altmetric Badge
    Chapter 56 The Fatigue Failure Prediction of a Vari-Speed Drive with Different Rollers
  58. Altmetric Badge
    Chapter 57 State of Health Estimation of Lithium-Ion Batteries from Charging Data: A Machine Learning Method
  59. Altmetric Badge
    Chapter 58 Harmonic Response Analysis of a Dual-Rotor System with Mass Unbalance
  60. Altmetric Badge
    Chapter 59 A Novel Method for Stacking Optimization of Aeroengine Multi-stage Rotors Based on 3D Deviation Prediction Model
  61. Altmetric Badge
    Chapter 60 A Sensor Fault Identification Method Based on Adaptive Particle Swarm Optimization Support Vector Machine
  62. Altmetric Badge
    Chapter 61 Correlation Analysis of Sensor Fault Based on Fuzzy Petri Net and Apriori Algorithm
  63. Altmetric Badge
    Chapter 62 Review on Simulation and Optimization of Vehicle Ride Comfort Based on Suspension Model
  64. Altmetric Badge
    Chapter 63 The Application of ADAMS Software to Vehicle Handling Stability: A Review
  65. Altmetric Badge
    Chapter 64 Analysis and Decompose of Nine Degrees of Freedom Motion Simulator Relative Positional Precision
  66. Altmetric Badge
    Chapter 65 A Study on Vibration Response in the Baseplate of a Delta 3D Printer for Condition Monitoring
  67. Altmetric Badge
    Chapter 66 An alysis of Metamaterials-Based Acoustic Sensing Enhancement
  68. Altmetric Badge
    Chapter 67 A Novel Cylindrical Mechanical Metastructure for Drone Vibration Isolation
  69. Altmetric Badge
    Chapter 68 Design and Simulation of Broadband Piezoelectric Energy Harvester with Multi-Cantilever
  70. Altmetric Badge
    Chapter 69 A Mobile Pipeline Leak Monitoring Robot Based on Power Spectrum Correlation Analysis and Sound Pressure Location
  71. Altmetric Badge
    Chapter 70 A Review of Acoustic Emission Monitoring on Additive Manufacturing
  72. Altmetric Badge
    Chapter 71 Modelling and Vibration Signal Analysis for Condition Monitoring of Industrial Robots
  73. Altmetric Badge
    Chapter 72 Study on Fault Mode of Hybrid Electric Vehicle
  74. Altmetric Badge
    Chapter 73 A New Two-Dimensional Condition-Based Maintenance Model by Using Copulas
  75. Altmetric Badge
    Chapter 74 Rotary Valve to Improve the Problem of Big End and Needle Glue Overflow in Contact Dispensing Process
  76. Altmetric Badge
    Chapter 75 The Positioning Accuracy Measurement of the Dispenser and Compensation Method
  77. Altmetric Badge
    Chapter 76 X/Y/Z High-Speed and High-Precision Operation Platform Design
  78. Altmetric Badge
    Chapter 77 Differentiable Architecture Searched Network with Tree-Structured Parzen Estimators for Rotating Machinery Fault Diagnosis
  79. Altmetric Badge
    Chapter 78 A Review of Fault Diagnosis Methods for Marine Electric Propulsion System
  80. Altmetric Badge
    Chapter 79 Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades
  81. Altmetric Badge
    Chapter 80 Research on Vibration Characteristics of Last Stage Blade Based on Blade Tip-Timing Technology
  82. Altmetric Badge
    Chapter 81 A Simulation Study of an Energy Harvester Operating on a Vertical Rotor System
  83. Altmetric Badge
    Chapter 82 Image-Based 3D Shape Estimation of Wind Turbine from Multiple Views
  84. Altmetric Badge
    Chapter 83 Health Status Assessment of Marine Diesel Engine Based on Testability Model
  85. Altmetric Badge
    Chapter 84 Modelling the Dynamics of a CNC Spindle for Tool Condition Identification Based on On-Rotor Sensing
  86. Altmetric Badge
    Chapter 85 Real-Time Condition Monitoring and Health Assessment of Equipment Power Transmission Device Based on Wireless Sensor Network
  87. Altmetric Badge
    Chapter 86 Research on Fault Detection Method for Special Equipment Under the Condition of Sample Missing
  88. Altmetric Badge
    Chapter 87 Research on Dynamic Impact Force Calculation for Spline Coupling Teeth and Its Suppression
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
3 Dimensions
Summary X Dimensions citations
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of IncoME-VI and TEPEN 2021
Published by
Springer International Publishing, June 2022
DOI 10.1007/978-3-030-99075-6
ISBNs
978-3-03-099074-9, 978-3-03-099075-6
Editors

Zhang, Hao, Feng, Guojin, Wang, Hongjun, Gu, Fengshou, Sinha, Jyoti K.

View on publisher site
X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.

This page is provided by Altmetric.