↓ Skip to main content

Advances in Manufacturing Engineering

Overview of attention for book
Cover of 'Advances in Manufacturing Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 The Effect of Composition on CO 2 Freeze-Out and Critical Locus of Binary CO 2 –CH 4 Mixture
  3. Altmetric Badge
    Chapter 2 Influence of the Agglomeration Phenomenon on the Recast Surface in PMEDM Environment
  4. Altmetric Badge
    Chapter 3 Comparison of the Removal Rate in EDM Based on the Mixed Environment
  5. Altmetric Badge
    Chapter 4 Influence of Projectile Penetration on the Multiple-Layered Target Based on Statistical and Numerical Analysis
  6. Altmetric Badge
    Chapter 5 Fractal Wear Behaviour of Gear Tooth: A Review
  7. Altmetric Badge
    Chapter 6 Finite Element Modeling of Nano Porous Sintered Silver Material
  8. Altmetric Badge
    Chapter 7 Creep Behaviour and Adhesion Properties of TiC Thin Film Coating Grown by RF Magnetron Sputtering
  9. Altmetric Badge
    Chapter 8 Taguchi Analysis of Surface Roughness of TiC Thin Films Deposited by RF Magnetron Sputtering
  10. Altmetric Badge
    Chapter 9 Laser Metal Deposition of Titanium Alloy: A Review
  11. Altmetric Badge
    Chapter 10 Effect of Novel Swirl Distributor Plate on Gasification Efficiency of Bubbling Fluidized Bed Gasifier
  12. Altmetric Badge
    Chapter 11 A Review of Recent Developments in Mechanical Properties of Polymer–Clay Nanocomposites
  13. Altmetric Badge
    Chapter 12 Effect of Some Additives on Tribological Properties of SAE20W40 Lubricant
  14. Altmetric Badge
    Chapter 13 Performance Evaluation on the Smartness of Malaysian Timber
  15. Altmetric Badge
    Chapter 14 A Brief Overview of Bending Operation in Sheet Metal Forming
  16. Altmetric Badge
    Chapter 15 Emerging Trend in Forging Operation
  17. Altmetric Badge
    Chapter 16 Effect of AFM Scan Size on the Scaling Law of Sputtered Aluminium Thin Films
  18. Altmetric Badge
    Chapter 17 Energy Content Modelling for Municipal Solid Waste Using Adaptive Neuro-Fuzzy Inference System (ANFIS)
  19. Altmetric Badge
    Chapter 18 Predicting the Effect of Seasonal Variation on the Physical Composition of Municipal Solid Waste: A Case Study of the City of Johannesburg
  20. Altmetric Badge
    Chapter 19 Optimization of Process Parameters Using Taguchi for Friction Stir Welding of Dissimilar Aluminum Alloys
  21. Altmetric Badge
    Chapter 20 Effect of Equal Channel Angular Pressing Die Angle on Corrosion Behavior of Bulk Nanostructured Metal
  22. Altmetric Badge
    Chapter 21 Investigation of Maximum Erosion Zone in the Horizontal 90° Elbow
  23. Altmetric Badge
    Chapter 22 An Overview: Mechanical and Wear Properties of HDPE Polymer Nanocomposites Reinforced with Treated/Non-treated Inorganic Nanofillers
  24. Altmetric Badge
    Chapter 23 Liquid Desiccant Membrane Regeneration of DES for Air Conditioning Systems Using Electrodialysis Technique
  25. Altmetric Badge
    Chapter 24 Effects of Process Conditions on Calorific Value and Yield of Charcoal Produced from Pyrolysis of Coconut Shells
  26. Altmetric Badge
    Chapter 25 Palm Kernel Shell as Potential Fuel for Syngas Production
  27. Altmetric Badge
    Chapter 26 Potential Roles of Artificial Intelligence in the LCI of Renewable Energy Systems
  28. Altmetric Badge
    Chapter 27 Fault Detection System for Long-Distance Gas Mixture Pipelines Using Statistical Features
  29. Altmetric Badge
    Chapter 28 Feasibility Study on Metal Inert Gas (MIG) Welding on Zincalume G550 Steel
  30. Altmetric Badge
    Chapter 29 The Influence of Welding Parameters on the Microhardness of Zincalume Steel Welded Joint Using Taguchi Technique in Metal Inert Gas (MIG)
  31. Altmetric Badge
    Chapter 30 Construction of a Hybrid Geometric Model for an Injection Mould Using CAD/CAM System
  32. Altmetric Badge
    Chapter 31 Development of a Face Sculpture Prototype Using a Reverse Engineering Technique
  33. Altmetric Badge
    Chapter 32 Experimental Investigations on the Surface Hardness of Synthesized Polystyrene/ZnO Nanocomposites
  34. Altmetric Badge
    Chapter 33 A Review: Hybrid Welding of High Strength Materials
  35. Altmetric Badge
    Chapter 34 Image Segmentation and Particle Size Analysis of Vibratory Disc Milled Titanium Alloy Powder
  36. Altmetric Badge
    Chapter 35 Hydrodynamic Analysis of Floating Offshore Solar Farms Subjected to Regular Waves
  37. Altmetric Badge
    Chapter 36 Open-Hole and Filled-Hole Failure Envelopes of BFRP and GFRP: A Comparative Study
  38. Altmetric Badge
    Chapter 37 Investigation on Effect of Fly Ash Volume Percentage on Microstructure and Microhardness of AA7075—Fly Ash Surface Composites via FSP
  39. Altmetric Badge
    Chapter 38 Design-Point Performance Adaptation of Small Gas Turbine Using Particle Swarm Optimization
  40. Altmetric Badge
    Chapter 39 Finite Element Analysis of the Heat Generated During FSP of 1100 Al Alloy
  41. Altmetric Badge
    Chapter 40 A Concise Review of the Effects of Hybrid Particulate Reinforced Aluminium Metal Matrix Composites on the Microstructure, Density and Mechanical Properties
  42. Altmetric Badge
    Chapter 41 Application of Molecular Dynamics Simulation: A Case Study to Estimate Wettability
  43. Altmetric Badge
    Chapter 42 A Comparison of Single-Vacuum-Bag and Double-Vacuum-Bag Methods for Manufacturing High-Quality Laminated Composites
  44. Altmetric Badge
    Chapter 43 Experimental Studies of FPSO Responses with Validation by Numerical and Artificial Neural Network Prediction
  45. Altmetric Badge
    Chapter 44 Surface Coating Processes: From Conventional to the Advanced Methods; a Short Review
  46. Altmetric Badge
    Chapter 45 Surface Coating Processes: From Conventional to Silane Organic Compound Applications: Recent and Prospects
  47. Altmetric Badge
    Chapter 46 Study of Additive Manufactured Ti–Al–Si–Cu/Ti–6Al–4V Composite Coating by Direct Laser Metal Deposition (DLMD) Technique
  48. Altmetric Badge
    Chapter 47 Experimental Investigation of Laser Metal Deposited Al–Cu–Ti Coatings on Ti–6Al–4V Alloy
  49. Altmetric Badge
    Chapter 48 Effect of Process Parameters on the Hardness Property of Laser Metal Deposited Al–Cu–Ti Coatings on Ti–6Al–4V Alloy
  50. Altmetric Badge
    Chapter 49 Feasibility Study of Through Hole Fabrication on Aluminium Nitride Ceramic Using Die-Sinking Electro-Discharge Machining
  51. Altmetric Badge
    Chapter 50 CFD Study on the Thermal Performance of n-Octadecane (PCM) Doped with Graphene Nanoparticles as a Potential Thermal Energy Storage Medium for Trombe Walls
  52. Altmetric Badge
    Chapter 51 Laser Metal Deposition of Titanium Composites: A Review
  53. Altmetric Badge
    Chapter 52 Efficacy of Quasi Agro Binding Fibre on the Hybrid Composite Used in Advance Application
  54. Altmetric Badge
    Chapter 53 Review on Ergonomics Application on Car Modification for Limbs Disabled Drivers
  55. Altmetric Badge
    Chapter 54 Hybrid Microgrid Systems: Operational Schedule Optimization Considering Time of Use Demand Response and Battery Wear Cost
  56. Altmetric Badge
    Chapter 55 A Review of Mathematical Optimization Applications in Renewable Energy-Powered Microgrids
  57. Altmetric Badge
    Chapter 56 Optimal Grid-Connected Microgrid Scheduling Incorporating an Incentive-Based Demand Response Program
  58. Altmetric Badge
    Chapter 57 Free-End Damage Detection in Cantilever Steel Plate Using Wavelet Transform Method
  59. Altmetric Badge
    Chapter 58 Determining the Potentials of Renewable Energy Sources for Distributed Generation in Ghana
  60. Altmetric Badge
    Chapter 59 Optimal Location of Distributed Generators in a Radial Distribution Network
  61. Altmetric Badge
    Chapter 60 Integrated Appliance Scheduling and Optimal Sizing of an Autonomous Hybrid Renewable Energy System for Agricultural Food Production
  62. Altmetric Badge
    Chapter 61 Cost Analysis of Hybrid Energy Storage System Benefits to Distribution Network Operators
  63. Altmetric Badge
    Chapter 62 The Awareness and Obstacle Factor of Machine Maintenance Toward Total Productive Maintenance in Manufacturing Company
  64. Altmetric Badge
    Chapter 63 A Multifractal Study of Al Thin Films Prepared by RF Magnetron Sputtering
  65. Altmetric Badge
    Chapter 64 Influence of Elbow Orientation on Solid Particle Erosion for Multiphase Flow
  66. Altmetric Badge
    Chapter 65 High-Speed Machining for CNC Milling Simulation Using CAM Software
  67. Altmetric Badge
    Chapter 66 Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications
  68. Altmetric Badge
    Chapter 67 Recycling of Polylactic Acid (PLA) Wastes from 3D Printing Laboratory
  69. Altmetric Badge
    Chapter 68 A Framework for the Optimal Sizing of Hybrid Solar PV-Battery-Hydro System for a Rural House in Malaysia
  70. Altmetric Badge
    Chapter 69 Anaerobic Treatment of Chicken Manure Co-digested with Sawdust
  71. Altmetric Badge
    Chapter 70 Temperature Distribution Investigation During Friction Stir Welding (FSW) Using Smoothed-Particle Hydrodynamics (SPH)
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
patent
1 patent
wikipedia
1 Wikipedia page

Citations

dimensions_citation
10 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Manufacturing Engineering
Published by
Springer Singapore, August 2020
DOI 10.1007/978-981-15-5753-8
ISBNs
978-9-81-155752-1, 978-9-81-155753-8
Editors

Emamian, Seyed Sattar, Awang, Mokhtar, Yusof, Farazila

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.