↓ Skip to main content

Advances in Applied Mechanical Engineering

Overview of attention for book
Cover of 'Advances in Applied Mechanical Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Computational Study of Mixed Convection of Electronic Chips with Surface Radiation
  3. Altmetric Badge
    Chapter 2 Combustion Performance of Hybrid Rocket Motor Under the Influence of Cylindrical Protrusion
  4. Altmetric Badge
    Chapter 3 Social and Economic Impact Assessment of Solar Water Pumping System on Farmers in Nagpur District of Maharashtra State of India
  5. Altmetric Badge
    Chapter 4 Thermally Developing Region of a Parallel Plate Channel Partially Filled with a Porous Material with the Effect of Axial Conduction and Viscous Dissipation: Uniform Wall Heat Flux
  6. Altmetric Badge
    Chapter 5 Experimental Study of Closed-Loop Thermosyphon System Using Different Working Fluids
  7. Altmetric Badge
    Chapter 6 Identifying Empirically Important Variables in IC Engine Operation Through Redundancy Analysis
  8. Altmetric Badge
    Chapter 7 Mixed Convective Heat Transfer with Surface Radiation in a Vertical Channel in Presence of Heat Spreader
  9. Altmetric Badge
    Chapter 8 Experimental Analysis on Thermal Performance of a Solar Air Heater at Different Angular Positions
  10. Altmetric Badge
    Chapter 9 Surface Pressure Characteristics over Indian Train Engine
  11. Altmetric Badge
    Chapter 10 Exergy Modelling of a Coal-Fired MHD Power Plant
  12. Altmetric Badge
    Chapter 11 Design, Development and Analysis of Intake Manifold of Single-Cylinder Diesel Engine
  13. Altmetric Badge
    Chapter 12 Calibration of Reference Velocity and Longitudinal Static Pressure Variation in the Test Section of an Open-Type Subsonic Wind Tunnel
  14. Altmetric Badge
    Chapter 13 Optimal Selection of Insulating Material for Energy Conservation in Steam Pipe Using Analytical Hierarchy Process
  15. Altmetric Badge
    Chapter 14 Heat Transfer Enhancement Using Overlapped Dual Twisted Tape Inserts with Nanofluids
  16. Altmetric Badge
    Chapter 15 Flow Characteristic Study of Contraction of Compressor Intermediate S-Shaped Duct Facility
  17. Altmetric Badge
    Chapter 16 Alternate Heating Process in ESP Hoppers of Thermal Power Plant—An Experimental Pilot Investigation
  18. Altmetric Badge
    Chapter 17 Experimental Study on the Performance of Micro-aerial Vehicle Propeller
  19. Altmetric Badge
    Chapter 18 Heat Transfer Enhancement of Al 2 O 3 -Based Nanofluid in a Shell and Helical Coil Heat Exchanger
  20. Altmetric Badge
    Chapter 19 Numerical Analysis of the Effect of Fluid–Structure Interaction on Heat Transfer in the Square Cavity Using OpenFOAM
  21. Altmetric Badge
    Chapter 20 Experimental Investigation of the Effect of Particle Concentration and Temperature on Thermophysical Properties of Water-Based Metal-Oxide Nanofluids
  22. Altmetric Badge
    Chapter 21 Pressure Drop in Vertical Pneumatic Conveying: Comparison Between Numerical Predictions with Existing Correlations
  23. Altmetric Badge
    Chapter 22 CFD Analysis in the Design of Diffuser for Air Cooling of Low-Concentrated Photovoltaic/Thermal (LCPV/T) Solar Collector
  24. Altmetric Badge
    Chapter 23 CFD Analysis of Wind Turbine with Different Flange Angles
  25. Altmetric Badge
    Chapter 24 Performance and Emission Characteristics of Thermal Barrier Coating on Diesel Engine Fueled with Cottonseed Biodiesel
  26. Altmetric Badge
    Chapter 25 Performance and Emission Analysis of Rapeseed Methyl Ester on DI Diesel Engine Using Artificial Neural Network
  27. Altmetric Badge
    Chapter 26 The Analytical Study of Velocity Slip on Two-Phase Flow in an Eccentric Annular Region
  28. Altmetric Badge
    Chapter 27 Numerical Study on the Effect of Impeller Geometry on Pump Performance
  29. Altmetric Badge
    Chapter 28 Numerical Study of Hydrogen-Fueled Scramjet Performance with Passive Techniques
  30. Altmetric Badge
    Chapter 29 Numerical Simulation of Heat Transfer and Fluid Flow Characteristics of Triangular Corrugated Wavy Channel
  31. Altmetric Badge
    Chapter 30 Emission and Performance Characteristics of CI Engine with Diesel–Butanol Blends Using Intake Pressure Boost
  32. Altmetric Badge
    Chapter 31 Thermal Design Methodology for Regenerative Fuel-Cooled Scramjet Engine Walls
  33. Altmetric Badge
    Chapter 32 Computational Studies of Shock Wave Boundary Layer Interactions in Hypersonic Flow Over Double Cone Geometries
  34. Altmetric Badge
    Chapter 33 Thermal Design and Testing of External Protuberance of Hypersonic Carrier Vehicle Airframe
  35. Altmetric Badge
    Chapter 34 The Effect of Diesel and Biodiesel Blends on CI Engine Performance and Emission Characteristics
  36. Altmetric Badge
    Chapter 35 Numerical Analysis of Fluid–Structure Interaction of Blood Flow Through a Flexible Tube with 90-Degree Bend Using OpenFOAM
  37. Altmetric Badge
    Chapter 36 Damage and Failure Analysis of Short Carbon Fiber Reinforced Epoxy Composite Pipe Using FEA
  38. Altmetric Badge
    Chapter 37 Dynamic Performance Analysis of a Four-Ton Automobile Chassis
  39. Altmetric Badge
    Chapter 38 Experimental Studies on Steel Beam-to-Column Connections Under Elevated Temperature
  40. Altmetric Badge
    Chapter 39 Investigating the Influence of Higher-Order NURBS Discretization on Contact Force Oscillation for Large Deformation Contact Using Isogeometric Analysis
  41. Altmetric Badge
    Chapter 40 Simple Optimization Algorithm for Design of a Uniform Column
  42. Altmetric Badge
    Chapter 41 Unbalance and Dynamic Parameters Estimation in a Rigid Rotor Mounted on Active Magnetic Bearings
  43. Altmetric Badge
    Chapter 42 Investigating the Influence of Geometrical and Material Parameters on Peeling Behaviour of a Gecko Spatula
  44. Altmetric Badge
    Chapter 43 Quantitative Analysis of Tribological Performance on Al–CSA Composite Using Orthogonal Array
  45. Altmetric Badge
    Chapter 44 Pre-strain in Dielectric Elastomer Actuator; Challenges Towards Structure–Property Relationship
  46. Altmetric Badge
    Chapter 45 Modified Electromechanical Model for Dielectric Elastomer Cylindrical Actuators
  47. Altmetric Badge
    Chapter 46 A Numerical Study to Investigate the Modal Analyses of Cracked Airplane Wing (NACA2415)
  48. Altmetric Badge
    Chapter 47 Synthesis and Characterization of Nano-grease for Automotive Wheel Bearing Application
  49. Altmetric Badge
    Chapter 48 Hamiltonian-Based Solutions of Certain PDE in Plasma Flows
  50. Altmetric Badge
    Chapter 49 Low-Cost Test Rig for Demonstrating Single Plane Balancing Using Vibrations
  51. Altmetric Badge
    Chapter 50 Nonlinear Dynamic Analysis of Automotive Turbocharger Rotor System
  52. Altmetric Badge
    Chapter 51 On the Response of a Beam Structure to a Moving Mass Using Green’s Function
  53. Altmetric Badge
    Chapter 52 A Programmatic Approach for the Prediction of Service Life of Deep Drawing Die Using ANN
  54. Altmetric Badge
    Chapter 53 Thermo-Mechanical Analysis of Unidirectional PALF Composites Using Micromechanical Approach
  55. Altmetric Badge
    Chapter 54 Analysis and Selection of Bio-stents Using Finite Element Method
  56. Altmetric Badge
    Chapter 55 Electromechanical Responses of Dielectric Elastomers
  57. Altmetric Badge
    Chapter 56 Design, Manufacturing, and Testing of Feeding and Bending Mechanism
  58. Altmetric Badge
    Chapter 57 Design and Kinematics of a Coal Bunker Scraper Guide-Mechanism
  59. Altmetric Badge
    Chapter 58 Measurement of Elastic Modulus and Damping Properties of Friction Stir Processed Pure Metals Using Impulse Excitation Technique
  60. Altmetric Badge
    Chapter 59 Dynamic Response of FGM Kirchhoff’s Plate
  61. Altmetric Badge
    Chapter 60 Comparative Study of Various Defects in Monolayer Graphene Using Molecular Dynamics Simulation
  62. Altmetric Badge
    Chapter 61 Application of Single-Sided NMR and Acousto-Ultrasonic Methods for NDE of Composite Structures
  63. Altmetric Badge
    Chapter 62 Effect of Material Damping on the Vibration Response of Cantilever Beams in Dynamic Environment
  64. Altmetric Badge
    Chapter 63 Active Vibration Control in Turbocharger Rotor System with the Use of Electromagnetic Actuator
  65. Altmetric Badge
    Chapter 64 Coupled Analysis of Underwater System by Numerical Approach
  66. Altmetric Badge
    Chapter 65 Design and Analysis on Reinforced Carbon–Basalt Fibres Composite Laminate
  67. Altmetric Badge
    Chapter 66 Optimum Geometry of Steering Mechanism for an Automobile
  68. Altmetric Badge
    Chapter 67 Influence of Surface Textures by Ink-Jet Print Followed by Chemical Etching Process on the Performance of HSS Cutting Tool
  69. Altmetric Badge
    Chapter 68 Effect of Temperature on the Tribological Performance of MoS 2 –TiO 2 Coating Material
  70. Altmetric Badge
    Chapter 69 Topology Optimization Using Strain Energy Distribution for 2D Structures
  71. Altmetric Badge
    Chapter 70 Kinematic Analysis for Optimum Manipulability and Trajectory Planning of Human Leg
  72. Altmetric Badge
    Chapter 71 Structural Topology Optimization: Methods and Applications
  73. Altmetric Badge
    Chapter 72 A Multi-objective Optimization Method Based on Nelder–Mead Simplex Search Method
  74. Altmetric Badge
    Chapter 73 Performance and Life Cycle Analysis of Soybean Oil-Based Minimum Quantity Lubrication in Machining of Ti6Al4V
  75. Altmetric Badge
    Chapter 74 Investigations on Corrosion Behaviour in Micro-Milling of Biomedical Grade Ti–6Al–7Nb Alloy
  76. Altmetric Badge
    Chapter 75 Optimization of Machining Parameters for Multi-performance Characteristics in Milling of Composite Solid Propellants Using RSM
  77. Altmetric Badge
    Chapter 76 The Effect of ZrO 2 and TiO 2 Reinforcing Agent on the Microstructure and Mechanical Properties of Hydroxyapatite Nanocomposites
  78. Altmetric Badge
    Chapter 77 Optimization of Machining Parameters for Vibration-Assisted Turning of Ti6Al4V Alloy Using Analysis of Variance
  79. Altmetric Badge
    Chapter 78 Characterisation and Performance Measure Evaluation of Nanofluid Blended Thin-Film Temperature Gauges
  80. Altmetric Badge
    Chapter 79 Base Transesterification of Ineffectual Soybean Oil Using Lab Scale Synthesized CaO Catalyst
  81. Altmetric Badge
    Chapter 80 Solid Lubricant Effect on the Microstructure and Hardness of the Functionally Graded Cemented Tungsten Carbide
  82. Altmetric Badge
    Chapter 81 Experimental and Microstructural Analysis of TIG and MIG Welding on Dissimilar Steels
  83. Altmetric Badge
    Chapter 82 Thermal Management of Avionic Packages Using Micro-blower
  84. Altmetric Badge
    Chapter 83 Evaluation of Mechanical Properties of Banana and S-glass Fiber-Reinforced Hybrid Nanosilica Composite
  85. Altmetric Badge
    Chapter 84 Tribological Behaviour of Carbon Fibre Polymer Composites Reinforced with Nano-fillers
  86. Altmetric Badge
    Chapter 85 Environment Effect on Impact Strength of Pistachio Shell Filler-Based Epoxy Composites
  87. Altmetric Badge
    Chapter 86 Performance Improvement of Nanofluid Minimum Quantity Lubrication (Nanofluid MQL) Technique in Surface Grinding by Optimization Using Jaya Algorithm
  88. Altmetric Badge
    Chapter 87 Wear Resistance of Structural Steels Having Ultra-Low Carbon to High Carbon Concentration
  89. Altmetric Badge
    Chapter 88 Experimental Investigation on Laser Beam Welded Joints of Dissimilar Metals and Optimization of Process Parameters Using Firefly Algorithm
  90. Altmetric Badge
    Chapter 89 Parametric Optimization of Electrical Discharge Grinding on Ti–6Al–4V Alloy Using Response Surface Methodology
  91. Altmetric Badge
    Chapter 90 Mathematical Modeling of Material Removal Rate Using Buckingham Pi Theorem in Electrical Discharge Machining of Hastelloy C276
  92. Altmetric Badge
    Chapter 91 Effect of Exfoliated Vermiculite as Thickening and Foaming Agent on the Physical Properties of Aluminium Foam
  93. Altmetric Badge
    Chapter 92 Multi-response Optimization of Process Parameters in Turn-Milling Processes—An Experimental Approach
  94. Altmetric Badge
    Chapter 93 On the Role of Amylum Additive-Based Cutting Fluids in Machining—An Experimental Investigation
  95. Altmetric Badge
    Chapter 94 Tensile Property of Ultra-High Molecular Weight Polyethylene Fibre and Its Composite Laminate
  96. Altmetric Badge
    Chapter 95 Experimental and Numerical Modeling of ECMM on Al 7075 T6 Alloy
  97. Altmetric Badge
    Chapter 96 FEM Modeling of Coated Tools to Study the Influence of Coating Thickness
  98. Altmetric Badge
    Chapter 97 Effect of Graphene Nanofluid on Machining Inconel 718
  99. Altmetric Badge
    Chapter 98 Mechanical Properties of AA 7075-Nano ZrO 2 Reinforced Matrix Composites
  100. Altmetric Badge
    Chapter 99 Experimental Investigation on Friction Stir Welding of HDPE Reinforced with SiC and Al and Taguchi-Based Optimization
  101. Altmetric Badge
    Chapter 100 Design and Simulation of Porous Ti–6Al–4V Alloy Structures for Additive Manufacturing of Bioimplants
  102. Altmetric Badge
    Chapter 101 Effect of Tool Geometry and Heat Treatment on Friction Stir Processing of AA6061
  103. Altmetric Badge
    Chapter 102 Analysis of Micro-cracks and Micro-hardness in White Layer Formation on Machined Surfaces in EDM Process
  104. Altmetric Badge
    Chapter 103 Multi-objective Optimization of Submerged Friction Stir Welding Process Parameters for Improved Mechanical Strength of AA6061 Weld Bead by Using Taguchi-L18-Based Gray Relational Analysis
  105. Altmetric Badge
    Chapter 104 Investigation on Wear Behaviour of AA5052/SiC/Al 2 O 3 Hybrid Composite Fabricated Using Stir Casting Process
  106. Altmetric Badge
    Chapter 105 Numerical Modelling of High Energy Density Beam-Assisted Machining of Hardened Armour Steel
  107. Altmetric Badge
    Chapter 106 Experimental Investigation of Electro-Discharge Machining on NIMONIC 80A Through Response Surface Methodology
  108. Altmetric Badge
    Chapter 107 Optimization of Minimum Quantity Lubrication Parameters
  109. Altmetric Badge
    Chapter 108 Experimental Investigation and Mathematical Modeling for Material Removal and Tool Wear in Making of Rectangular Channels by Electric Discharge Machining (EDM) on Aluminum–Boron Carbide Composite Sintered Preform
  110. Altmetric Badge
    Chapter 109 Investigation on the Microstructure and Mechanical Properties of AZ91D Magnesium Alloy Plates Joined by Friction Stir Welding
  111. Altmetric Badge
    Chapter 110 Mechanical Characterization of Unidirectional Banana–Glass Fiber-Reinforced Hybrid Composites
  112. Altmetric Badge
    Chapter 111 Experimental Investigation of Ultrasonic Flaw Defects in Weld Clad Materials Using NDT Technique
  113. Altmetric Badge
    Chapter 112 An Effective and Economical Method to Improve Structural Homogeneity and Mechanical Properties of Al–Mg Alloy Processed by ECAE
  114. Altmetric Badge
    Chapter 113 Characterization of Kenaf/Aloevera Fiber Reinforced PLA-Hybrid Biocomposite
  115. Altmetric Badge
    Chapter 114 Performance Analysis of Different Tool Shape in Electric Discharge Machining Process with Vegetable Oil as Dielectric Fluid
  116. Altmetric Badge
    Chapter 115 Experimental and Finite Element Analysis of Fracture Toughness of Chilled LM13 MMC
  117. Altmetric Badge
    Chapter 116 Design and Fabrication of Die Back Door for Manufacturing of Cylinder Liners
  118. Altmetric Badge
    Chapter 117 Fabrication and Characterization of Functionally Graded Composites Using Friction Stir Processing
  119. Altmetric Badge
    Chapter 118 Multi-Parametric Optimization of Electrical Discharge Machining of Inconel-690 Using RSM-GRA Technique
  120. Altmetric Badge
    Chapter 119 Effect of Nanoparticles Addition on Microstructural and Mechanical Properties of Friction Stir Welded 2014 Aluminium Alloy
  121. Altmetric Badge
    Chapter 120 Investigation on Influence of Hybrid Nanofluid/MQL on Surface Roughness in Turning Inconel-718
  122. Altmetric Badge
    Chapter 121 Fuzzy Logic and Regression Modelling of Machining Parameters in Turning AISI 1040 Steel Using Vegetable-Based Cutting Fluids with Extreme Pressure Additive
  123. Altmetric Badge
    Chapter 122 A New Approach in Establishing Stable Machining Parameters Using Frame Statistics and Kurtosis
  124. Altmetric Badge
    Chapter 123 Design and Ergonomic Work Posture Evaluation of Garbage Disposal Pushcart
  125. Altmetric Badge
    Chapter 124 Redesigning of Electric Plug for Assembly Time Reduction Using DFA
  126. Altmetric Badge
    Chapter 125 Analysis and Optimization of Queueing Systems in Airports—Discrete Event Simulation
  127. Altmetric Badge
    Chapter 126 An Extensive Study of Multi-level Inventory Lot Sizing Optimization Problem
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Readers on

mendeley
12 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Applied Mechanical Engineering
Published by
Springer Singapore, January 2020
DOI 10.1007/978-981-15-1201-8
ISBNs
978-9-81-151200-1, 978-9-81-151201-8
Editors

Voruganti, Hari Kumar, Kumar, K. Kiran, Krishna, P. Vamsi, Jin, Xiaoliang

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 12 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 5 42%
Researcher 2 17%
Lecturer 1 8%
Student > Master 1 8%
Professor 1 8%
Other 2 17%
Readers by discipline Count As %
Engineering 7 58%
Materials Science 3 25%
Energy 1 8%
Unknown 1 8%