↓ Skip to main content

Advances in Mechanical Engineering

Overview of attention for book
Cover of 'Advances in Mechanical Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 The Effect of Resting Time on the Shedding of a Drop
  3. Altmetric Badge
    Chapter 2 Impact of Palm Oil Methyl Ester Drops on a Surface
  4. Altmetric Badge
    Chapter 3 Successive Impact of Two Drops on Surfaces with Various Wettability
  5. Altmetric Badge
    Chapter 4 CFD Analysis of Responses of Two-Equation Turbulence Models for Flow over NACA 0012, NACA 4412 and S809 Aerofoils
  6. Altmetric Badge
    Chapter 5 Linear Instability Analysis of Viscous Planar Liquid Sheet Sandwiched Between Two Moving Gas Streams
  7. Altmetric Badge
    Chapter 6 Flow Analysis of Vortex Generators in the Shroud of a Horizontal Axis Wind Turbine
  8. Altmetric Badge
    Chapter 7 A Coupled Level Set and Volume-of-Fluid Method for Modeling Two-Phase Flows
  9. Altmetric Badge
    Chapter 9 A Novel Passive Flow Control Method for Underwater Vehicles
  10. Altmetric Badge
    Chapter 10 Experimental and Computational Analysis of Heat Transfer by a Turbulent Air Jet Impingement on a Flat Surface
  11. Altmetric Badge
    Chapter 11 A Study on the Wake Regime Control and Drag Reduction Using Single Splitter Plate for a Flow Past a Semicircular Cylinder
  12. Altmetric Badge
    Chapter 12 Numerical Analysis of Wall Shear Stress Parameters of Newtonian Pulsatile Blood Flow Through Coronary Artery and Correlation to Atherosclerosis
  13. Altmetric Badge
    Chapter 13 Effect of Thickness of Porous Layer on Thermo-Hydraulic Characteristics and Entropy Generation in a Partially Porous Wavy Channel
  14. Altmetric Badge
    Chapter 14 Computational Study of Slot Jet Impingement Heat Transfer on a Combined Dimpled and Protruded Concave Surface
  15. Altmetric Badge
    Chapter 15 Numerical Study of Coaxial Evacuated Tube Collector with Nano-fluid
  16. Altmetric Badge
    Chapter 16 Optimization of Microwave Power and Reinforcement in Microwave-Cured Coir/HDPE Composites
  17. Altmetric Badge
    Chapter 17 Design and Simulation Study of HPDC for Automotive Parts—Pinion Housing Based on ADSTFEAN Simulation System
  18. Altmetric Badge
    Chapter 18 Conceptualization of a Machining Fixture for Machining Cylinder Block on a Horizontal Machining Center
  19. Altmetric Badge
    Chapter 19 Multi-scale Computational Analysis of Carbon-Nanotube–Polymer Composite
  20. Altmetric Badge
    Chapter 20 Comparative Study of Some Machining Characteristics During Hard Turning of Alloy Steel with Untreated and Cryotreated Cermet Inserts
  21. Altmetric Badge
    Chapter 21 Process Parameters Optimization of EDMed Surface of Titanium-Grade-4 Alloy Using Topsis Coupled with Taguchi Philosophy
  22. Altmetric Badge
    Chapter 22 Analytical Study for Enhancing Gear Performance Using Al2O3 Paint Coating
  23. Altmetric Badge
    Chapter 23 Ballistic Impact Response of HDPE/UHMWPE Polymer Composite
  24. Altmetric Badge
    Chapter 24 PCA-GRA Integrated Multi Response Optimization of Wire-Cut EDM of Ti–6Al–4V Alloy for Sustainable Production
  25. Altmetric Badge
    Chapter 25 Investigating Weldability in Microalloyed Al Alloys
  26. Altmetric Badge
    Chapter 26 Thermomechanical Analysis of Al-7075 to Predict Residual Stresses by Using 3D Finite Element Simulation
  27. Altmetric Badge
    Chapter 27 Application of Nitriding Treatments on EN 3 and EN 24 Steels for Rotating Bending Fatigue Resistance
  28. Altmetric Badge
    Chapter 28 Finite Element Based Prediction of Transient Temperature Distribution, Heat Affected Zone and Residual Stresses in AISI 304 Stainless Steel Weldment
  29. Altmetric Badge
    Chapter 29 Isogeometric FE Analysis of Laminated Composite Plates
  30. Altmetric Badge
    Chapter 30 Investigation of Weld Bead Characteristics and Optimization of GMAW of Nitrogen Strengthened Austenitic Stainless Steel (AISI 201Gr)
  31. Altmetric Badge
    Chapter 31 Two-Dimensional Numerical Investigation on the Effect of Laser Parameters on Laser Indirect Machining of Glass
  32. Altmetric Badge
    Chapter 32 Three-Dimensional Numerical Modelling of Temperature Profiles on the Wire Electrode During Wire Electric Discharge Machining Process
  33. Altmetric Badge
    Chapter 33 Synthesis and Responsive Study of Tensile and Flexural Properties of Bamboo Filler Based Functionally Graded Composite
  34. Altmetric Badge
    Chapter 34 A Study on the Effect of Micro-alloying of Titanium in 2xxx Aluminium Alloy
  35. Altmetric Badge
    Chapter 35 A Study of Effect of Micro-alloying of Tin on Ageing Behaviour of 6xxx Series Aluminium Alloys
  36. Altmetric Badge
    Chapter 36 A Brief Review of White Layer Formation in Hard Machining with a Case Study
  37. Altmetric Badge
    Chapter 37 Effect of µEDM Milling Process Parameters on Surface Roughness During Machining Ti–6Al–4V
  38. Altmetric Badge
    Chapter 38 Analysis of Chip Formation of AISI 52100 Steel During Hard Turning with Newly Developed HSN2 Coated Carbide Insert
  39. Altmetric Badge
    Chapter 39 Minimization of Transportation Cost of Paraffin Wax: A Proposed Approach Using C
  40. Altmetric Badge
    Chapter 40 Evaluation of Dry Sliding Wear Properties of Stir Cast AA7050/10B4C Composites Through Fuzzy-ARAS
  41. Altmetric Badge
    Chapter 41 Investigation of Machining Capabilities of 2.5 vol. % MWCNT Al2O3 Composites in µ-EDM
  42. Altmetric Badge
    Chapter 42 Microstructure and Microhardness Characteristics of TiC–TiN Ceramics Coating by TIG Process on Mild Steel
  43. Altmetric Badge
    Chapter 43 Microstructural Characterization of Ti-6Al-4V Alloy Fiber Laser Weldments
  44. Altmetric Badge
    Chapter 44 Drilling Analysis of Natural Fiber-Reinforced Polylactic Acid Composites Fabricated by Hot Compression Moulding
  45. Altmetric Badge
    Chapter 45 Parametric Study of Photochemical Machining of Aluminium Using Taguchi Approach
  46. Altmetric Badge
    Chapter 46 Effect of Fiber Orientation on the Tensile and Wear Properties of Flax Fiber-Reinforced Composites
  47. Altmetric Badge
    Chapter 47 Exploration of MOORA Based Hybrid Taguchi Method for Multi-response Optimization—A Case Study
  48. Altmetric Badge
    Chapter 48 Drilling an Array of Square Micro-holes Using Micro-EDM
  49. Altmetric Badge
    Chapter 49 Magnetic Field Assisted Finishing of Ferromagnetic Air Compressor Cylinder Using Smart MR Polishing Fluid
  50. Altmetric Badge
    Chapter 50 Induction of Conditioning Gas and Its Optimization in Nonconventional Plasma Machining Process of Fused Silica
  51. Altmetric Badge
    Chapter 51 Design and Fabrication of Electrochemical MicroMachining (ECMM) Experimental Setup for Micro-hole Drilling
  52. Altmetric Badge
    Chapter 52 Factor Effect on Crater Shapes in Electrical Discharge Machining
  53. Altmetric Badge
    Chapter 53 Drilling of Micro-holes in Titanium Using Micro-EDM: A Parametric Investigation
  54. Altmetric Badge
    Chapter 54 Effects of Kingpin and Caster Offset on Braking Stability of Long Wheelbase Bus
  55. Altmetric Badge
    Chapter 55 Shear Behaviour of the Delaminated Glass Fibre Reinforced Composite Laminates
  56. Altmetric Badge
    Chapter 56 Parametric Optimization of Process Parameters in WEDM of AISI 316 Stainless Steel
  57. Altmetric Badge
    Chapter 57 Numerical Study of Welding Distortion in SAW Welded Creep Strength Enhanced Ferrite Steel Joint
  58. Altmetric Badge
    Chapter 58 Finite Element Analysis of Patient-Specific Femur Bone for Synthetic Biomaterials
  59. Altmetric Badge
    Chapter 59 Investigation of Microstructural and Mechanical Properties of Magnesium Matrix Hybrid Composite
  60. Altmetric Badge
    Chapter 60 Investigations of Mechanical Properties of Copper Matrix Hybrid Composite
  61. Altmetric Badge
    Chapter 61 Effect of Tool Rotation on Microstructure and Hardness of AZ31 Mg Alloy Processed by FSP
  62. Altmetric Badge
    Chapter 62 Experimental Investigation of Forced Convective Cooling of Rectangular Blocks
  63. Altmetric Badge
    Chapter 63 Conduction-Based Standardization of K-Type Coaxial Thermocouple for Short-Duration Transient Heat Flux Measurement
  64. Altmetric Badge
    Chapter 64 Performance Analysis of a Coal-Fired Open Cycle MHD Plant at Constant Subsonic Inlet Nozzle Mach Number with Variation in Nozzle–Area Ratio
  65. Altmetric Badge
    Chapter 65 A Simplified Approach for the Rapid Evaluation of Thermodynamic Properties of Saturated Water and Steam
  66. Altmetric Badge
    Chapter 66 Prediction of Moisture Ratios (MRs) During Fluidized Bed Drying of Ginger (Zingiber Officinale) Cubes by Using Mathematical Modeling and Experimental Validation
  67. Altmetric Badge
    Chapter 67 Performance and Emission Characteristics of Variable Compression Ratio (VCR) Engine Using Different Biofuels—A Review
  68. Altmetric Badge
    Chapter 68 Hydrodynamics of a CFB Gasifier with Two Different Cross Sections in the Riser
  69. Altmetric Badge
    Chapter 69 Thermodynamic Analysis of Irreversible Reversed Brayton Cycle Heat Pump with Finite Capacity Finite Conductance Heat Reservoirs
  70. Altmetric Badge
    Chapter 70 Indian Sub-bituminous and Low-Rank Coal Gasification Experiments in a Circulating Fluidized Bed Gasifier Under Air Atmosphere
  71. Altmetric Badge
    Chapter 71 Thermal Model for Temperature Control of Building Subjected to Variable Solar Radiation
  72. Altmetric Badge
    Chapter 72 Performance Analysis of Mixed Convection in T-Shaped Geometry for Entropy Generation Using Lattice Boltzmann Method
  73. Altmetric Badge
    Chapter 73 Analytical Model for Tri-Dimensional Fourier Bioheat Transfer Encountered in Regional Hyperthermia
  74. Altmetric Badge
    Chapter 74 A Comparative Evaluation of Combustion Characteristics of Strut and Wall Injection Technique in a Cavity-Based Scramjet Combustor
  75. Altmetric Badge
    Chapter 75 Numerical Investigation on the Influence of Turbulence Models on Prediction of Flow Characteristics of a Scramjet Combustor
  76. Altmetric Badge
    Chapter 76 Effect of Varying Oblique Angle on Heat Transfer Enhancement in Oblique Channel
  77. Altmetric Badge
    Chapter 77 Performance Analysis of Split-Drop-Shaped Pin Fins for Improved Heat Transfer Rate
  78. Altmetric Badge
    Chapter 78 Simulation of Fully Developed Flow and Heat Transfer in Wavy Channels Using OpenFOAM
  79. Altmetric Badge
    Chapter 79 Numerical Analysis of Different Arrangement of Square Pin-Fin Microchannel Heat Sink
  80. Altmetric Badge
    Chapter 80 Exact Analytical Determination of Nusselt Number for Flow Through a Microchannel Under Electric and Magnetic Field
  81. Altmetric Badge
    Chapter 81 Thermodynamic Analysis of a 500-MWe Subcritical Coal-Fired Thermal Power Plant with Solar-Aided Post-Combustion CO2 Capture
  82. Altmetric Badge
    Chapter 82 Performance Analysis of LPG Cook Stoves with Modifications
  83. Altmetric Badge
    Chapter 83 Parametric Study of Wavy Microchannel Using Nanofluid
  84. Altmetric Badge
    Chapter 84 Bed Hydrodynamics of Fluidized Bed Paddy Drying: An Experimental Study
  85. Altmetric Badge
    Chapter 85 Experimental Studies on Energy Conservation in Pool Boiling Heat Transfer Using Eco-friendly Additive
  86. Altmetric Badge
    Chapter 86 Thermal Analysis and Estimation of Tumor Properties in Breast Tissue
  87. Altmetric Badge
    Chapter 87 Simulation of Emission from Coal-Fired Power Plant
  88. Altmetric Badge
    Chapter 88 Numerical Analysis of Heat Transfer and Fluid Flow in Mini-channel Heat Sink with Interconnecting Channels
  89. Altmetric Badge
    Chapter 89 Simultaneous Heat and Mass Transfer Analysis in Falling Film Absorber
  90. Altmetric Badge
    Chapter 90 Identification of Maximum Stressed Region in Hip Prosthesis
  91. Altmetric Badge
    Chapter 91 Thermal Performance of Heat Pipe with PCM Jacket
  92. Altmetric Badge
    Chapter 92 New Approach for Determining Fin Performances of an Annular Disc Fin with Internal Heat Generation
  93. Altmetric Badge
    Chapter 93 CFD-Based Study on Thermal and Fluid Flow Dynamics Due to Miller Teeth Shaped Ribs Over Absorber Plate of Solar Air Collector
  94. Altmetric Badge
    Chapter 94 Natural Convective Heat Transfer from an Inclined Isothermal Fin Array
  95. Altmetric Badge
    Chapter 95 Design of Inertial Class Gyroscope Resonator with Ultrahigh Quality Factor for Interplanetary Space Missions
  96. Altmetric Badge
    Chapter 96 Experimental Study on Vibration Analysis of a Needle Roller Bearing Using Various Grades of Lubricant Viscosity
  97. Altmetric Badge
    Chapter 97 Multi-directional Sound Reduction by Slitted Sonic Crystal
  98. Altmetric Badge
    Chapter 98 A Novel Passive Mechanism to Improve Induced Strain in Two-DOF Piezoelectric Energy Harvester
  99. Altmetric Badge
    Chapter 99 Cepstrum Analysis of Instantaneous Angular Speed for Gearbox Fault Detection
  100. Altmetric Badge
    Chapter 100 Combustion Detection in IC Engine by Analysis of Instantaneous Angular Acceleration
  101. Altmetric Badge
    Chapter 101 Identification of Nonlinear Structural Parameters Using Combined Power Flow and Acceleration Matching Approaches
  102. Altmetric Badge
    Chapter 102 Finite Element Analysis of Buckling, Free Vibration and Flexure of Clamped Laminated Composite Plates in Variable Thermal Environment
  103. Altmetric Badge
    Chapter 103 Detection of Local Defect Resonance Frequencies for Defect Imaging: A Nonlinear Ultrasound-Based Approach
  104. Altmetric Badge
    Chapter 104 Numerical Assessment of Fatigue Life for Concrete Column
  105. Altmetric Badge
    Chapter 105 Non-linear Analysis of Rotational Inertial Double-Tuned Mass Damper by Harmonic Balance Method
  106. Altmetric Badge
    Chapter 106 Comparative Study of Performance of Optimized Valve for Different Flow Indices of Rheological Model
  107. Altmetric Badge
    Chapter 107 Static Stability Investigation of an Asymmetric Sandwich Beam in Temperature Environment
  108. Altmetric Badge
    Chapter 108 Thermo-economic Study of Phase Change Materials (PCMs) for Thermal Energy Storage
  109. Altmetric Badge
    Chapter 109 Comparative Analysis of Absorber Tubes of Parabolic Trough Solar Collector Using Therminol VP-1 as Heat Transfer Fluid
  110. Altmetric Badge
    Chapter 110 Exergy Analysis of a Variable Compression Ratio Engine Operated on Diesel and Pine Seed Oil Biodiesel Blends
  111. Altmetric Badge
    Chapter 111 Solar Resource Assessment Using GHI Measurements at a Site in Northeast India
  112. Altmetric Badge
    Chapter 112 Computational Analysis of Internally Grooved Absorber Tubes of Parabolic Trough Solar Collector for Constant Mass Flow Rate of the Heat Transfer Fluid
  113. Altmetric Badge
    Chapter 113 Effect of Size and Cascading of Receivers on the Performance of a Solar Collector System
  114. Altmetric Badge
    Chapter 114 Experimental Investigation of Solar Powered Vapor Compression Air Conditioner with Indian Climatic Condition
  115. Altmetric Badge
    Chapter 115 Feasibility of Wind Energy as Power Generation Source at Shillong (Meghalaya)
  116. Altmetric Badge
    Chapter 116 Computational Analysis of Sensible Energy Storage for Low-Temperature Application
  117. Altmetric Badge
    Chapter 117 Feasibility Study of Photovoltaic-Thermal (PV/T) Collector in Assam (India) Using Polysun
  118. Altmetric Badge
    Chapter 118 An Analytical Investigation of Solar Water Heater Performance During Winter Period in Jharkhand Region
  119. Altmetric Badge
    Chapter 119 Energy Saving Potential of an Air-Conditioning System with Desiccant and Solar Assisted Ventilation
  120. Altmetric Badge
    Chapter 120 Trapezoidal Approach to Establish One-Dimensional Analysis of an Absorber Plate for Two-Dimensional Heat Flow
  121. Altmetric Badge
    Chapter 121 Heat Transfer Analysis of a Solar Air Heater Roughened with Chamfered Rib and Groove Roughness on the Absorber Plate Using CFD Approach
  122. Altmetric Badge
    Chapter 122 Study of LPG and Biogas Combustion in Two-Layer Porous Radiant Burners (PRBs)
  123. Altmetric Badge
    Chapter 123 Mathematical Modeling and Optimized Design Aspects of Secondary Reflectors for Solar Parabolic Trough Collector
  124. Altmetric Badge
    Chapter 124 Adaptive Control of the Wind Turbine Transmission System for Smooth Power Generation
  125. Altmetric Badge
    Chapter 125 Parametric Optimization for Yield of Biodiesel from Waste Cooking Oil Feedstock
  126. Altmetric Badge
    Chapter 126 Comparison of Various Solar Radiation Data Sources for Feasibility Study of Parabolic Trough Collector Power Plant in Assam
  127. Altmetric Badge
    Chapter 127 A Numerical Study on Microchannel Cooling for Photovoltaic Cells
  128. Altmetric Badge
    Chapter 128 Spider Monkey Optimization Algorithm Based Collision-Free Navigation and Path Optimization for a Mobile Robot in the Static Environment
  129. Altmetric Badge
    Chapter 129 Kinematic and Dynamic Optimal Trajectory Planning of Industrial Robot Using Multi-objective Ant Lion Optimizer
  130. Altmetric Badge
    Chapter 130 Type-1 Fuzzy Pulse Width Modulation Controlled Motion Planning of Differential Drive 4-Wheeled Power Robot
  131. Altmetric Badge
    Chapter 131 Multi-Objective Design Optimization of a Bioinspired Underactuated Robotic Gripper Using Multi-Objective Grey Wolf Optimizer
  132. Altmetric Badge
    Chapter 132 Implementation of Topological Derivative as an Evolutionary Approach
  133. Altmetric Badge
    Chapter 133 Geodesic Approach for Trajectory Planning of Mobile Robot Manipulators
  134. Altmetric Badge
    Chapter 134 Electro-hydraulic Motion Tracking Control of a Hot MS Plate of a Laboratory-Scale Reciprocating ROT
  135. Altmetric Badge
    Chapter 135 Path Planning of a Humanoid Robot Using Rule-Based Technique
  136. Altmetric Badge
    Chapter 136 Automated Vehicles Path Modification for Designated Via-Point Using Nonlinear Simplex Optimizer
  137. Altmetric Badge
    Chapter 137 Zero-Speed Off-tracking Analysis of Tractor-Semitrailer with Split Fifth Wheel Coupling for 90° and 180° Turning Manoeuvres
  138. Altmetric Badge
    Chapter 138 Derivation of Complete Performance Characteristics of a Low Head Prototype Francis Turbine Using CFD
  139. Altmetric Badge
    Chapter 139 Stress and Deformation Analysis of a Swash Plate Type Variable Displacement Axial Piston Pump Through Solidworks Environment
  140. Altmetric Badge
    Chapter 140 Comparative Study of Stress Analysis for Three Bladed Underwater Vehicle Propellers with Two Different Composite Materials
  141. Altmetric Badge
    Chapter 141 Recent Development and Application of the Hydrostatic Transmission System
  142. Altmetric Badge
    Chapter 142 Active Power Control of the Francis Turbine System by Model-Free Adaptive Controller
  143. Altmetric Badge
    Chapter 143 Design Procedure for a Blast Wave Generator and Its Validation with Shock Tube Experiments
  144. Altmetric Badge
    Chapter 144 A Feasibility Study of Superhydrophobic Coating on Al6061 for Airplane Anti-icing Applications
  145. Altmetric Badge
    Chapter 145 Dynamic Calibration of Three-Component Accelerometer Force Balance System Using Deconvolution
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
2 X users

Citations

dimensions_citation
3 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Mechanical Engineering
Published by
Springer Singapore, January 2020
DOI 10.1007/978-981-15-0124-1
ISBNs
978-9-81-150123-4, 978-9-81-150124-1
Editors

B. B. Biswal, Bikash Kumar Sarkar, P. Mahanta

X Demographics

X Demographics

The data shown below were collected from the profiles of 2 X users who shared this research output. Click here to find out more about how the information was compiled.