↓ Skip to main content

Emerging Trends in Mechanical Engineering

Overview of attention for book
Cover of 'Emerging Trends in Mechanical Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Parametric Optimization of Nd:YAG Laser Microgrooving of Alumina Ceramic Using Integrated RSM-PSO Approach
  3. Altmetric Badge
    Chapter 2 Optimization of Valve-Train Components for Durability Analysis by Using Finite Element Analysis Method
  4. Altmetric Badge
    Chapter 3 Stratification by Fuel Injection and Positive Ignition
  5. Altmetric Badge
    Chapter 4 Analysis of Miniature Loop Heat Pipe Under Varying Working Fluids and Wick Materials at Low Heat Inputs
  6. Altmetric Badge
    Chapter 5 Computational Design and Analysis of a Piston with Different Head Thicknesses and Top Land Widths
  7. Altmetric Badge
    Chapter 6 Development and Fabrication of Smart Waste Segregator
  8. Altmetric Badge
    Chapter 7 Influence of Heat Index on Tensile Properties and Formability of Friction Stir Dissimilar Welded Blanks
  9. Altmetric Badge
    Chapter 8 Convective Heat Transfer on the Optimum Spacing of High Heat Dissipating Heat Sources—A Numerical Approach
  10. Altmetric Badge
    Chapter 9 Effect of Alkali Treatment on Mechanical Properties of Tapsi Fiber Reinforced Polyester Composites
  11. Altmetric Badge
    Chapter 10 Finite Element Analysis and Theoretical Wear Behaviour for Total Hip Replacement
  12. Altmetric Badge
    Chapter 11 Characteristics of Mixed Convective Flowover Fins for Automobile Application
  13. Altmetric Badge
    Chapter 12 A Study on Implementation of Simulation at Operational Level in Manufacturing System
  14. Altmetric Badge
    Chapter 13 Productivity Improvement at Actuator Assembly Section Using Manual and Video Work Study Techniques
  15. Altmetric Badge
    Chapter 14 Development and Characterization of Polyamide Fiber Composite Filled with Fly Ash for Wind Turbine Blade
  16. Altmetric Badge
    Chapter 15 Stereomicroscopic Analysis of Fracture Surfaces of Cold Drawn Steel Wires
  17. Altmetric Badge
    Chapter 16 Comparison of Thermo-Physical and Tribological Characteristics of Nanolubricant
  18. Altmetric Badge
    Chapter 17 Predictive Modeling and Optimization of Technological Response Parameters in Nd:YAG Laser Microgrooving of Titanium Alloy Using Combined RSM-PSO Approach
  19. Altmetric Badge
    Chapter 18 Application of Taguchi’s Orthogonal Array and Overall Evaluation Criteria in Turning of AISI D2 Steel in Dry and Forced Air-Cooled Environment
  20. Altmetric Badge
    Chapter 19 Rearranging and Optimizing of Butterfly Valve Manufacturing Layout Using Simulation
  21. Altmetric Badge
    Chapter 20 A Comparative Analysis of Annular Fin Array Under Multi-objective Optimization
  22. Altmetric Badge
    Chapter 21 A Novel Discount Mechanism for Buy Online PickUp in Store (BOPS)
  23. Altmetric Badge
    Chapter 22 Investigation of Fracture Parameters of Jute/Glass Reinforced Hybrid Composite and Analysis by Using FEA
  24. Altmetric Badge
    Chapter 23 Optimization of Machining Parameters During Dry Cutting of Ti6Al4V Using Taguchi’s Orthogonal Array
  25. Altmetric Badge
    Chapter 24 Makespan Optimization in Open Shop Scheduling
  26. Altmetric Badge
    Chapter 25 Assessment of Manufacturing Process Through Lean Manufacturing and Sustainability Indicators: Case Studies in Indian Perspective
  27. Altmetric Badge
    Chapter 26 Effects of Graphite Particles in Titanium Metal Matrix Developed by Spark Plasma Sintering Process
  28. Altmetric Badge
    Chapter 27 Effect on Bearings in Rotating Components by Vibration Analysis: A Case Study in Steel Plant
  29. Altmetric Badge
    Chapter 28 Multi-objective Optimization of Photochemical Machining Parameters Using Taguchi Grey Relational Analysis
  30. Altmetric Badge
    Chapter 29 Experimental Investigations on Microstructure, Mechanical and Wear Behavior Under Dry Sliding of Al6061 with Particulate-Reinforced SiC and TiB 2 Metal Matrix Composite Developed by Stir Casting
  31. Altmetric Badge
    Chapter 30 Investigations on Material Removal Rate During Wire Electrodischarge Machining of Nickel–Titanium Alloy
  32. Altmetric Badge
    Chapter 31 A Study on the Development of Aluminum Alloys Using the Mechanical Surface Improvement Method Using the Taguchi Method
  33. Altmetric Badge
    Chapter 32 A Review on 4D Printing—the Next Industrial Revolution
  34. Altmetric Badge
    Chapter 33 Parametric Investigations on Friction Stir Welding of Aluminium Alloys
  35. Altmetric Badge
    Chapter 34 A Study of Direct and Inverse Problems in Force Sensing of Elastic Bodies
  36. Altmetric Badge
    Chapter 35 Linear Heat Transfer and Structural Analysis of a Railway Wheel
  37. Altmetric Badge
    Chapter 36 Performance Optimization of VCR Diesel Engine Using Soybean Oil-Based Biodiesel
  38. Altmetric Badge
    Chapter 37 Vibration Response of Sandwich Beam with Viscoelastic Core and FGM Face Sheets Using Finite Element Method
  39. Altmetric Badge
    Chapter 38 Heat Transfer Enhancement with Different Nanofluids in Heat Exchanger by CFD
  40. Altmetric Badge
    Chapter 39 Adopting SDR Fluctuations to Non-premixed Turbulent Combustion by Varying Swirl Ratio
  41. Altmetric Badge
    Chapter 40 Flat-Fire Trajectory Simulation of AK-47 Assault Rifle 7.82-mm Bullet
  42. Altmetric Badge
    Chapter 41 Optimum Annular Plane Fin Profile with Uniformly Varying Thickness
  43. Altmetric Badge
    Chapter 42 Experimental Study on Effect of Green Cutting Fluid and Surfactant on Temperature in Turning Operation
  44. Altmetric Badge
    Chapter 43 Comparative Investigation of Alloy Plates Against Ballistic Impact, Blast, and Fire Loading
  45. Altmetric Badge
    Chapter 44 Inverse Kinematics and Trajectory Planning of Planar Redundant Manipulators in Cluttered Workspace
  46. Altmetric Badge
    Chapter 45 Investigation on Mechanical Properties of Equal Channel Angular Formed Al6061 and Graphite Metal Matrix Composite
  47. Altmetric Badge
    Chapter 46 The Effect of Heat Treatment on Mechanical Properties of Aluminium Alloy 7075 with Nano B 4 C
  48. Altmetric Badge
    Chapter 47 Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA
  49. Altmetric Badge
    Chapter 48 Study of Wear Properties of Vinyl Ester Polymer Filled with Micro-Gr-Nano-CuO Particles
  50. Altmetric Badge
    Chapter 49 Experimental Modeling of EDMed Aluminum Metal Metrix Composite: A Review
  51. Altmetric Badge
    Chapter 50 Numerical Simulation of Transient Temperature and Stresses During Friction Stir Welding of AA 7075 T651
  52. Altmetric Badge
    Chapter 51 Energy Production Through Gasification of Waste Biomass in Punjab Region
  53. Altmetric Badge
    Chapter 52 Image Correlation Technique for Slope and Curvature of a Cantilever Beam Using Light Intensity
  54. Altmetric Badge
    Chapter 53 Influence of the Notch Length on the Optimal Radial Location of Strain Gage in a Single Edged Notched Plate
  55. Altmetric Badge
    Chapter 54 Mathematical Prediction of Thermal Runaway Conditions During the Nitration of DNT to TNT
  56. Altmetric Badge
    Chapter 55 Flow Physics Analysis on the Effect of Cambered Airfoil Blades on Vertical Axis Wind Turbines Using CFD
  57. Altmetric Badge
    Chapter 56 Application of Additive Dispersed Green Cutting Fluids in Machining
  58. Altmetric Badge
    Chapter 57 Investigating the Effect of Metal Working Fluid in Orthogonal Cutting of AISI 420 Stainless Steel Using 3-Dimensional Finite Element Model
  59. Altmetric Badge
    Chapter 58 Free and Forced Vibration Analysis of Functionally Graded Beams Using Finite Element Model Based on Refined Third-Order Theory
  60. Altmetric Badge
    Chapter 59 A Statistical Analysis to Optimize Wear Properties of Hybrid Polymer PTFE Composites
  61. Altmetric Badge
    Chapter 60 Recent Advances in the Development of Aluminium Matrix Composites (AMCs)
  62. Altmetric Badge
    Chapter 61 A Comparative Analysis of LiDAR and Wind Mast Measured Wind Data with the Reanalysis Datasets for an Offshore Location of Gujarat
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Emerging Trends in Mechanical Engineering
Published by
Springer Singapore, November 2019
DOI 10.1007/978-981-32-9931-3
ISBNs
978-9-81-329930-6, 978-9-81-329931-3
Editors

Vijayaraghavan, L., Reddy, K. Hemachandra, Jameel Basha, S. M.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.