↓ Skip to main content

Smart Technologies for Energy, Environment and Sustainable Development

Overview of attention for book
Cover of 'Smart Technologies for Energy, Environment and Sustainable Development'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Solar Power Plant at Shradha Park and Optimal Solution to Improve the Advancement in Technology—A Case Study
  3. Altmetric Badge
    Chapter 2 Implementation of Single-Phase SRF ( d - q ) Theory for Control Technique in DVR Restoring Voltage Sag in Sensitive Nonlinear Load
  4. Altmetric Badge
    Chapter 3 Performance Degradation of Discrete PID Controller for Digital Excitation Control System Due to Variation of Sampling Time
  5. Altmetric Badge
    Chapter 4 Bidirectional Voltage Source Converter for Microgrid
  6. Altmetric Badge
    Chapter 5 Smart HVAC System Using Fuzzy Logic
  7. Altmetric Badge
    Chapter 6 Analysis and Optimization Technique of Secure Smart Grid Communication Network for Sustainable Development
  8. Altmetric Badge
    Chapter 7 Issues Regarding Stability Aspects When SCIG and DFIG Are Interacting with Grid with FACTS Devices
  9. Altmetric Badge
    Chapter 8 Techno-economical and Feasibility Analysis of Hybrid PV – Wind System – Case Study
  10. Altmetric Badge
    Chapter 9 Design and Simulation of Photovoltaic Water Pumping System
  11. Altmetric Badge
    Chapter 10 Maximum Power Point Tracker for Standalone PV System Using Neural Networks
  12. Altmetric Badge
    Chapter 11 Industrialized Safekeeping Arrangement With GSM Scheme Using Proteus Software
  13. Altmetric Badge
    Chapter 12 Topology and Control of Hybrid Nine-Level Inverter
  14. Altmetric Badge
    Chapter 13 Leveraging Education Sector Using Cognitive Big Data for the Recruitment Process and Sustainable Development
  15. Altmetric Badge
    Chapter 14 Energy Assessment on Double Power Generation System of Building Integrated Photovoltaic and Fuel Cell
  16. Altmetric Badge
    Chapter 15 Analysis of Switched Reluctance Motor for Reduction in the Torque Ripple Without Controller
  17. Altmetric Badge
    Chapter 16 Overview of the Controllers Used for Mitigation of Harmonics Injected Due to Nonlinear Loads
  18. Altmetric Badge
    Chapter 17 Study of Properties of Coal Bottom Ash and Waste Foundry Sand and its Use in Concrete
  19. Altmetric Badge
    Chapter 18 Assessment of Biogas Production from Energy Crop Using Animal Manure as Co-substrate Through Portable Reactor
  20. Altmetric Badge
    Chapter 19 Land Use/Land Cover Change Analysis of Doon Valley Using ArcGIS Tools
  21. Altmetric Badge
    Chapter 20 Change Detection of Land Use/Land Cover of Sardar Sorovar Command Area, India, Using Arc-Gis Tools
  22. Altmetric Badge
    Chapter 21 Environmental Impact of Fly Ash Brick in Comparison with Traditional Brick
  23. Altmetric Badge
    Chapter 22 Land Cover/Land Use Change and Fragmentation in Uttarakhand, the Western Himalaya Based on GlobeLand30 Datasets
  24. Altmetric Badge
    Chapter 23 Marine Debris in India: Quantifying Type and Abundance of Beach Litter Along Chennai, East Coast of India
  25. Altmetric Badge
    Chapter 24 Self-curing Possibilities of Polygel in Ordinary Concrete
  26. Altmetric Badge
    Chapter 25 Light Transmitting Concrete—Litracon
  27. Altmetric Badge
    Chapter 26 Interlinking of Dams to Transfer Water Under Gravity
  28. Altmetric Badge
    Chapter 27 Effect of Cow Urine on Municipal Solid Waste: Composition, Leachate Generated and Quality
  29. Altmetric Badge
    Chapter 28 Application of Tube Settlers in Water Treatment Process—A Review
  30. Altmetric Badge
    Chapter 29 Evaluate Properties of GPC with the Addition of an Alkaline Solution and Different Types of Fly Ash
  31. Altmetric Badge
    Chapter 30 Removal of Hexavalent Chromium from Aqueous Solution by Alumina-Supported Copper Aluminum Oxide Nanoparticles
  32. Altmetric Badge
    Chapter 31 Remote Sensing and Geographic Information System-Based Route Planning
  33. Altmetric Badge
    Chapter 32 Analysis of Foundations and Soil–Structure Interaction Using FEM—A Review
  34. Altmetric Badge
    Chapter 33 Effect of Floor Diaphragms on Seismic Response of RCC Framed Building—A Review
  35. Altmetric Badge
    Chapter 34 A Review on: ‘Performance of Friction Damper for Response Control of Buildings Considering Effect of Soil–Structure Interaction’
  36. Altmetric Badge
    Chapter 35 Effects of Temperature Curing on Concrete with Silica
  37. Altmetric Badge
    Chapter 36 Review on an Experimental Study on Concrete Strength by Using Sugarcane Bagasse Ash and Steel Fiber
  38. Altmetric Badge
    Chapter 37 Analysis of Multi-storey Structures with Respect to Sequential Analysis
  39. Altmetric Badge
    Chapter 38 Mixed Influence of Metakaolin (MK) and Steel Fiber on Mechanical Properties of Concrete
  40. Altmetric Badge
    Chapter 39 Impact of Metakaolin and Steel Fibre on Mechanical Properties of Concrete
  41. Altmetric Badge
    Chapter 40 Progressive Collapse Analysis of Composite Structure
  42. Altmetric Badge
    Chapter 41 Effect of Mineral and Chemical Admixture for Improvement of High-Performance Concrete
  43. Altmetric Badge
    Chapter 42 Comparative Analysis of ECC by Partial Replacement of Cement with Slag Sand
  44. Altmetric Badge
    Chapter 43 Analysis and Characterizations of Modified Caesalpinia Bonduc (MCB) Seed Coat in the Process of Defluoridation
  45. Altmetric Badge
    Chapter 44 Punching Shear Distribution of Flat Slab with Opening Adjacent to Column
  46. Altmetric Badge
    Chapter 45 Soft Sensor for TSS in Effluent of Primary Clarifier of Industrial Effluent Treatment Plant
  47. Altmetric Badge
    Chapter 46 Comparative Analysis of BRTS and MRTS—An Approach Required for Selection of System
  48. Altmetric Badge
    Chapter 47 Prediction of Groundwater Withdrawal for a Composite Coal Mine Over a Mine Life: A Case Study
  49. Altmetric Badge
    Chapter 48 Impact of Ash Disposal in Coal-Based Thermal Power Plant on Groundwater Quality and Availability
  50. Altmetric Badge
    Chapter 49 Damage Detection of Shear Strengthened (Originally Deficient) Reinforced Concrete Beams Using EMI Technique
  51. Altmetric Badge
    Chapter 50 Assessment of Multi-storied RC Framed Structure Using Passively Damped Viscous Dampers
  52. Altmetric Badge
    Chapter 51 Design and Experimental Study of Voided Slab with Proposed New Shape of Void Former
  53. Altmetric Badge
    Chapter 52 Development of Finned Tube Type Adsorber Bed for Adsorption Cooling System
  54. Altmetric Badge
    Chapter 53 Oil- and Aluminum-Based Thermal Storage System Using Flat Plate Solar Collector
  55. Altmetric Badge
    Chapter 54 Effect of Ground Condition on the Storage Zone Temperature of Salinity Gradient Solar Pond
  56. Altmetric Badge
    Chapter 55 Wear Behavior of Polytetrafluoroethylene Composites: A Review
  57. Altmetric Badge
    Chapter 56 Predictive Model for Vibrations Induced at the Bearings of Spinning Charkha
  58. Altmetric Badge
    Chapter 57 Bone Drilling Parameters and Necrosis: An In Vitro Study
  59. Altmetric Badge
    Chapter 58 Identification of Performance Measures for Supply Chain Performance Measurement in Textile Enterprise
  60. Altmetric Badge
    Chapter 59 Influence of Process Parameters on Abrasive Water Jet Machined Pockets on Inconel 718 Alloy
  61. Altmetric Badge
    Chapter 60 Polypropylene Alloys and Composites—A Review
  62. Altmetric Badge
    Chapter 61 Experimental Study on the Performance of Standing Wave Thermoacoustic Refrigeration System
  63. Altmetric Badge
    Chapter 62 Roadmap for Lean Implementation in Testing Laboratory
  64. Altmetric Badge
    Chapter 63 Durability Analysis of Titanium Engine Valves Using CAE
  65. Altmetric Badge
    Chapter 64 Selection of Blank Size for Deep Drawing of Rectangular Parts
  66. Altmetric Badge
    Chapter 65 Binary Logistics Regression Analysis to Assess Employability of Engineering Graduates in IT Sector
  67. Altmetric Badge
    Chapter 66 Process Parameters Optimization of Drip Pipe Extrusion Process Using Taguchi Approach
  68. Altmetric Badge
    Chapter 67 Nanofluids—A Novel Approach of Enhancing the Heat Transfer
  69. Altmetric Badge
    Chapter 68 Design Analysis of Conventional and Composite Spur Gear Using Finite Element Method
  70. Altmetric Badge
    Chapter 69 Automation on Front Fork Assembly Machines Using Vibro-Feeder & Pick and Place Mechanism
  71. Altmetric Badge
    Chapter 70 Hydraulic Design of Diffuser of Catalytic Converter
  72. Altmetric Badge
    Chapter 71 Reduction of Warm-Up Time in Light Duty Petrol Engine
  73. Altmetric Badge
    Chapter 72 “Study of Springback Effect in Industrial Grade Materials in Sheet Metal Processing Using FEA”
  74. Altmetric Badge
    Chapter 73 An Experimental Investigation of Thermal Performance of an Octagonal Box Type Solar Cooker
  75. Altmetric Badge
    Chapter 74 “Design of Wire Rope Straightener Equipped with Micrometer Screw Gauges”
  76. Altmetric Badge
    Chapter 75 Uncertainty of Measurement—An Overview
  77. Altmetric Badge
    Chapter 76 Arduino-Based Tuned Electromagnetic Shaker Using Relay for MEMS Cantilever Beam
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Readers on

mendeley
2 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Smart Technologies for Energy, Environment and Sustainable Development
Published by
Springer Singapore, April 2019
DOI 10.1007/978-981-13-6148-7
ISBNs
978-9-81-136147-0, 978-9-81-136148-7
Editors

Kolhe, Mohan Lal, Labhasetwar, Pawan Kumar, Suryawanshi, H. M.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 2 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 2 100%

Demographic breakdown

Readers by professional status Count As %
Other 1 50%
Unknown 1 50%
Readers by discipline Count As %
Engineering 1 50%
Unknown 1 50%