↓ Skip to main content
What is this page? Embed badge

Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete

Overview of attention for book
Cover of 'Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Considerations for the Energy Balance and Preliminary Design of an Experimental LC 3 Cement Pilot Plant
  3. Altmetric Badge
    Chapter 2 Use of Grinding Aids for Grinding Ternary Blends Portland Cement-Calcined Clay-Limestone
  4. Altmetric Badge
    Chapter 3 Effect of the Addition of Calcined Clay-Limestone-Gypsum in the Hydration of Portland Cement Pastes
  5. Altmetric Badge
    Chapter 4 Influence of Limestone Content and PSD of Components on Properties of Clinker-Calcined Clay-Limestone Cements Produced by Intergrinding
  6. Altmetric Badge
    Chapter 5 Influence of the Limestone Type on the Compression Strength of LC 3 Cements
  7. Altmetric Badge
    Chapter 6 Pozzolanic Reactivity of the Calcination Products Obtained from Yaguajay Clay Deposit
  8. Altmetric Badge
    Chapter 7 Mechanical Strength Analysis of Ternary Cement Pastes Containing Nanosilica and Metakaolin
  9. Altmetric Badge
    Chapter 8 Hydration of Cement Pastes Using the Cement LC 3
  10. Altmetric Badge
    Chapter 9 Potentialities of Different Materials from the Eastern Region of Cuba as Partial Cement Substitutes: A Comparison of Their Performance
  11. Altmetric Badge
    Chapter 10 Production of Limestone-Calcined Clay Cement in Guatemala
  12. Altmetric Badge
    Chapter 11 Processing of Calcined Clays for Applications in Cementitious Materials: The Use of Grinding Aids and Particle Classification After Grinding
  13. Altmetric Badge
    Chapter 12 First Experiences with Geopolymeric Mortars of Alkaline Activation Based on Natural Pozzolans
  14. Altmetric Badge
    Chapter 13 Surfaces of Response. An Effective Methodology to Estimate the Optimal Factor k of the Supplementary Cementitious Materials
  15. Altmetric Badge
    Chapter 14 Determination by Ultraviolet-Visible Spectroscopy of Adsorption of the Superplasticising Admixtures Dynamon SX 32 and Dynamon SRC 20 in Calcined Clay of Layers A, B and C of the Yaguajay Deposit and the Pontezuela Deposit
  16. Altmetric Badge
    Chapter 15 Effect of Gypsum Content on the Compressive Strength of LC 3 Cement
  17. Altmetric Badge
    Chapter 16 Experimental Pilot Plant for Low Carbon Cements Development: The Cuban Innovative Project
  18. Altmetric Badge
    Chapter 17 Ultrasonication Effect of Silica Fume on Compressive Strength of Cement Pastes
  19. Altmetric Badge
    Chapter 18 Influence of Fixation of Consistency or Superplasticizer Content on Strength of Cement Pastes with Silica Fume or Nanosilica
  20. Altmetric Badge
    Chapter 19 The Effect of Various Superplasticizers on Ultra High Strength Concrete
  21. Altmetric Badge
    Chapter 20 Can Sustainability of Concrete Construction Be Improved Through a Better Understanding of Field Practices? Lessons from Haiti
  22. Altmetric Badge
    Chapter 21 Production of Durable Concrete with a Mineral Addition Blend of Calcined Clay-Limestone-Gypsum (LC2) and Portland Cement
  23. Altmetric Badge
    Chapter 22 Behavior of Retraction in Fluid Concretes Produced with Active Mineral Addition LC 2
  24. Altmetric Badge
    Chapter 23 Behavior of Concrete Made with PP-35 Cement in the Province of Cienfuegos
  25. Altmetric Badge
    Chapter 24 Assessment of Addition of Calcinated Clay-Limestone-Plaster to Ordinary Portland Cement in Brickwork Mortars
  26. Altmetric Badge
    Chapter 25 Concrete Manufactured with LC3 Following the Cuban Standard NC 120: 2014
  27. Altmetric Badge
    Chapter 26 Evaluation of the LC 3 to Be Used for the Local Production of Materials in Cienfuegos
  28. Altmetric Badge
    Chapter 27 Using a Physical Model Based on Particle Mobility for Mix Design of Commercial Concretes in Order to Increasing Eco-Efficiency
  29. Altmetric Badge
    Chapter 28 Influence of Temperature and Co 2 Partial Pressure on Carbonation Curing for Cement-Free Steel Slag-Based Materials
  30. Altmetric Badge
    Chapter 29 Use of Residues of Crushed Pet Bottles in the Form of a Scale as an Addition to the Manufacture of Concrete
  31. Altmetric Badge
    Chapter 30 Evaluation of the Aggregates of the Quarry “El Purio” in the Province of Villa Clara
  32. Altmetric Badge
    Chapter 31 Characterization of Ferrocement Designed with GRP Reinforcement. Deformation and Displacement
  33. Altmetric Badge
    Chapter 32 Atmospheric Corrosion Behaviors of Reinforcement Steel in Reinforced Concrete in a Coastal City as Havana, Cuba
  34. Altmetric Badge
    Chapter 33 Preliminary Results on Corrosion Rate in Carbonated LC 3 Concrete
  35. Altmetric Badge
    Chapter 34 Use of Electrical Test Method on Determination Aging Factor of Concrete Incorporating Supplementary Cementitious Materials
  36. Altmetric Badge
    Chapter 35 Evaluation of Carbonation in Specimens Made with LC3 Low Carbon Cement
  37. Altmetric Badge
    Chapter 36 Deterioration of Structures Affected by Concrete Leaching
  38. Altmetric Badge
    Chapter 37 Atmospheric Corrosion Study of Carbon Steel in Havana Waterfront Zone
  39. Altmetric Badge
    Chapter 38 Studies Carried Out on Concretes Produced with LC3 According to Cuban Standard NC 120: 2014
  40. Altmetric Badge
    Chapter 39 Monitoring and Interpreting the Early Properties of Alkali-Activated Materials by Electrical Conductivity Measurement
  41. Altmetric Badge
    Chapter 40 Case Study on Concrete Durability Field Exposure Station in Hangzhou Bay Bridge, China
  42. Altmetric Badge
    Chapter 41 Evaluating Carbonation-Induced Corrosion in High-Volume SCM Mixtures Through the Square Root Model
  43. Altmetric Badge
    Chapter 42 Diagnose on the State of Deterioration of the Materials of a Ship of the Company of IT Transports of Combustible Transcupet Caibarien
  44. Altmetric Badge
    Chapter 43 Prediction of Mechanical Properties of Concrete Made with Recycled Concrete Aggregates Using Statistical Analysis of Data Available in Literature
  45. Altmetric Badge
    Chapter 44 Evaluation of Different Treatment Techniques in Recycled Aggregates for Use in the Production of Concrete
  46. Altmetric Badge
    Chapter 45 Durability of Recycled Aggregate Concrete Under Real Conditions in Tropical Ambience
  47. Altmetric Badge
    Chapter 46 Potential Use of a Quarry Waste for the Production of Self-compacting Concrete
  48. Altmetric Badge
    Chapter 47 Successively Recycled Concretes Exposed to Sulfate Soil During 11 Years
  49. Altmetric Badge
    Chapter 48 Sand Replacement by Fine Recycled Concrete Aggregates as an Approach for Sustainable Cementitious Materials
  50. Altmetric Badge
    Chapter 49 Encapsulation of Recycled Aggregates Using Mixed Construction and Demolition Wastes
  51. Altmetric Badge
    Chapter 50 Combining Reactivity Test, Isothermal Calorimetry, and Compressive Strength Measurements to Study Conventional and Alternative Supplementary Cementitious Materials
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

wikipedia
1 Wikipedia page

Citations

dimensions_citation
10 Dimensions

Readers on

mendeley
44 Mendeley
Summary Wikipedia Dimensions citations
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete
Published by
Springer International Publishing, August 2019
DOI 10.1007/978-3-030-22034-1
ISBNs
978-3-03-022033-4, 978-3-03-022034-1
Editors

Martirena-Hernandez, Jose Fernando, Alujas-Díaz, Adrian, Amador-Hernandez, Meylin

View on publisher site
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 44 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 44 100%

Demographic breakdown

Readers by professional status Count As %
Researcher 1 2%
Unknown 43 98%
Readers by discipline Count As %
Materials Science 1 2%
Unknown 43 98%

This page is provided by Altmetric.