↓ Skip to main content

Advances in Manufacturing II

Overview of attention for book
Cover of 'Advances in Manufacturing II'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Parametric Modeling of Gear Cutting Tools
  3. Altmetric Badge
    Chapter 2 Verification of Machine Tool Set-Up Stability Using a Simplified Wolfram Language-Based Model
  4. Altmetric Badge
    Chapter 3 Balancing of a Wire Rope Hoist Using a Cam Mechanism
  5. Altmetric Badge
    Chapter 4 The Influence of Imperfections on the Strength and Stability of Cold-Formed Sigma Channels with Corrugated Flanges
  6. Altmetric Badge
    Chapter 5 Fatigue Life of Auxetic Re-entrant Honeycomb Structure
  7. Altmetric Badge
    Chapter 6 Experimental Investigations of Steel Welded Machine Tool Bodies Filled with Composite Material
  8. Altmetric Badge
    Chapter 7 Loader Crane Modal Analysis Using Simplified Hydraulic Actuator Model
  9. Altmetric Badge
    Chapter 8 Temperature Distribution in Workpiece During Flowdrill - Numerical Experiment Based on Meshless Methods
  10. Altmetric Badge
    Chapter 9 Injection Moulding Simulation and Validation of Thin Wall Components for Precision Applications
  11. Altmetric Badge
    Chapter 10 Problems of Flaking in Strengthening Shaft Burnishing
  12. Altmetric Badge
    Chapter 11 Parametric Modeling of Transverse Layout for Machine Tool Gearboxes
  13. Altmetric Badge
    Chapter 12 Increasing of Lathe Equipment Efficiency by Application of Gang-Tool Holder
  14. Altmetric Badge
    Chapter 13 Fabrication of Biodegradable Mg Alloy Bone Scaffold Through Electrical Discharge µ-Drilling Route
  15. Altmetric Badge
    Chapter 14 Possibility of Block Grouping of Magnetic Inspection Operations for Iron Impurities in Oils and Cutting Fluids
  16. Altmetric Badge
    Chapter 15 Construction of the Facility for Aluminium Alloys Electromagnetic Stirring During Casting
  17. Altmetric Badge
    Chapter 16 The Influence of Technological Parameters on Cutting Force Components in Milling of Magnesium Alloys with PCD Tools and Prediction with Artificial Neural Networks
  18. Altmetric Badge
    Chapter 17 Investigations of Electronic Controller for Electrohydraulic Valve with DC and Stepper Motor
  19. Altmetric Badge
    Chapter 18 Evaluation of Castings Surface Quality Made in 3D Printed Sand Moulds Using 3DP Technology
  20. Altmetric Badge
    Chapter 19 Impedance-Based PZT Transducer and Fuzzy Logic to Detect Damage in Multi-point Dressers
  21. Altmetric Badge
    Chapter 20 Hybrid Numerical-Analytical Approach for Force Prediction in End Milling of 42CrMo4 Steel
  22. Altmetric Badge
    Chapter 21 Analysis of the Pulsating Water Jet Maximum Erosive Effect on Stainless Steel
  23. Altmetric Badge
    Chapter 22 Comparison of the Weld Quality Created by Metal Active Gas and Shielded Metal Arc Welding
  24. Altmetric Badge
    Chapter 23 Application of the Motion Capture System in the Biomechanical Analysis of the Injured Knee Joint
  25. Altmetric Badge
    Chapter 24 Hydrogen Embrittlement After Surface Treatments
  26. Altmetric Badge
    Chapter 25 Effect of Modification of Mono-crystalline Corundum Grinding Wheel on Cutting Forces in Grinding of Aluminum Alloy 7075
  27. Altmetric Badge
    Chapter 26 Influence of Processing Parameters on Clamping Force During Injection Molding Process
  28. Altmetric Badge
    Chapter 27 Prediction of the Microhardness Characteristics, the Removable Material Volume for the Durability Period, Cutting Tools Durability and Processing Productivity Depending on the Grain Size of the Coating or Cutting Tool Base Material
  29. Altmetric Badge
    Chapter 28 Modelling and Analysis of Cutting Force Components in Turning Process of Commercially Pure Titanium Grade 2
  30. Altmetric Badge
    Chapter 29 Surface Quality Analysis After Face Grinding of Ceramic Shafts Characterized by Various States of Sintering
  31. Altmetric Badge
    Chapter 30 Influence of the Most Important Elements of the Prosthesis on Biomechanics of the Human Gait After Amputation of the Lower Limb
  32. Altmetric Badge
    Chapter 31 Potential Studies of Waterjet Cavitation Peening on Surface Treatment, Fatigue and Residual Stress
  33. Altmetric Badge
    Chapter 32 Thermo-Mechanical Phenomena in Aluminum Alloy Casting During Cooling – Experimental Simulation
  34. Altmetric Badge
    Chapter 33 Micro-machining and Process Optimization of Electrochemical Discharge Machining (ECDM) Process by GRA Method
  35. Altmetric Badge
    Chapter 34 Analysis of Material Removal Efficiency in Face Milling of Aluminum Alloy
  36. Altmetric Badge
    Chapter 35 The Examination of Cutting Force as Function of Depth of Cut in Cases with Constant and Changing Chip Cross Section
  37. Altmetric Badge
    Chapter 36 Methodology of Determination of Key Casting Process Parameters on DISA MATCH Automatic Moulding Line Affecting the Formation of Alloy-Mould Contact Defects
  38. Altmetric Badge
    Chapter 37 Numerical Modeling of MuCell ® Injection Moulding Process
  39. Altmetric Badge
    Chapter 38 Comparative Experimental Investigation of Mechanical Properties and Adhesion of Low Temperature PVD Coated TiO 2 Thin Films
  40. Altmetric Badge
    Chapter 39 Frictional Properties of α-Nucleated Polypropylene-Based Composites Filled with Wood Flour
  41. Altmetric Badge
    Chapter 41 Innovative Natural Yarn Manufactured from Waste
  42. Altmetric Badge
    Chapter 42 Mechanical and Thermal Properties of Rotational Molded PE/Flax and PE/Hemp Composites
  43. Altmetric Badge
    Chapter 43 Clay/EVA Copolymer Nanocomposite - Processing and Properties
  44. Altmetric Badge
    Chapter 44 Synthesis and Characterization of Bioceramic Oxide Coating on Zr-Ti-Cu-Ni-Be BMG by Electro Discharge Process
  45. Altmetric Badge
    Chapter 45 Investigation of Alloy Composition and Sintering Parameters on the Corrosion Resistance and Microhardness of 316L Stainless Steel Alloy
  46. Altmetric Badge
    Chapter 46 The Impact of Long-Term Environmental Conditions on the Lifetime Prediction (S-N) of Biomaterial Used in Dentistry
  47. Altmetric Badge
    Chapter 47 Influence of Residual Stress Induced in Steel Material on Eddy Currents Response Parameters
  48. Altmetric Badge
    Chapter 48 Determination of Dynamic Properties of a Steel Hollow Section Filled with Composite Mineral Casting
  49. Altmetric Badge
    Chapter 49 Corrosion Resistance of Alternative Chemical Pre-treatments of Hot-Dip Galvanized Zinc Surface
  50. Altmetric Badge
    Chapter 50 The Influence of Mixing Method and Mixing Parameters in Process of Preparation of Anti-static Coating Materials Containing Nanoparticles
  51. Altmetric Badge
    Chapter 51 Cleaning of Internal Surfaces
  52. Altmetric Badge
    Chapter 52 Mechanical Properties and Structure of Reactive Rotationally Molded Polyurethane - Basalt Powder Composites
  53. Altmetric Badge
    Chapter 53 Manufacturing and Properties of Biodegradable Composites Based on Thermoplastic Starch/Polyethylene-Vinyl Alcohol and Silver Particles
  54. Altmetric Badge
    Chapter 54 Manufacturing and Properties of Recycled Polyethylene Films with an Inorganic Filler by the Extrusion Blow Moulding Method
  55. Altmetric Badge
    Chapter 55 Hybrid Epoxy Composites Reinforced with Flax Fiber and Basalt Fiber
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
1 patent

Citations

dimensions_citation
7 Dimensions

Readers on

mendeley
11 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Manufacturing II
Published by
Springer International Publishing, July 2019
DOI 10.1007/978-3-030-16943-5
ISBNs
978-3-03-016942-8, 978-3-03-016943-5
Editors

Gapiński, Bartosz, Szostak, Marek, Ivanov, Vitalii

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 11 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 11 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 5 45%
Unspecified 3 27%
Student > Bachelor 1 9%
Student > Master 1 9%
Researcher 1 9%
Other 0 0%
Readers by discipline Count As %
Unspecified 3 27%
Business, Management and Accounting 2 18%
Engineering 2 18%
Economics, Econometrics and Finance 1 9%
Computer Science 1 9%
Other 2 18%