↓ Skip to main content

Proceedings of the 7th International Conference on Fracture Fatigue and Wear

Overview of attention for book
Cover of 'Proceedings of the 7th International Conference on Fracture Fatigue and Wear'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Failure Analysis of a Removable Support of a Cockpit Seat in a STOL Airplane
  3. Altmetric Badge
    Chapter 2 Spot Welding Joint’s Fracture Behavior and Fundamental
  4. Altmetric Badge
    Chapter 3 Failure and Fracture Analysis of Al-alloy Wheel Rim of a Vehicle
  5. Altmetric Badge
    Chapter 4 Key Parameters for Fracture Toughness of Particle/Polymer Nanocomposites; Sensitivity Analysis via XFEM Modeling Approach
  6. Altmetric Badge
    Chapter 5 A Criterion for Crack Initiation at Blunt Notches Based on the Concept of Local Strength
  7. Altmetric Badge
    Chapter 6 Effect of Friction Coefficient and Maximum Contact Pressure on the Spalling Depth of Gear Teeth Flank
  8. Altmetric Badge
    Chapter 7 Transient Analysis of Multiple Interface Cracks in Two Bonded Elastic and Piezoelectric Layers
  9. Altmetric Badge
    Chapter 8 A Study on the Constitutive Equation Effects in the Fracture Initiation of AA5450 Sheets
  10. Altmetric Badge
    Chapter 9 Predicting the Failure Type of Liquid Hydrocarbon Pipeline Using Fuzzy Expert System
  11. Altmetric Badge
    Chapter 10 Simulation of Loading Rate Effects on Dynamic Brittle Failure of Concrete Structures Using a Two-Scale Damage Model
  12. Altmetric Badge
    Chapter 11 Deformation Behavior and Fracture of Al-CuZr Nano-Laminates: A Molecular Dynamics Simulation Study
  13. Altmetric Badge
    Chapter 12 Model of Damaged Medium for Describing Fatigue Fracture of Materials and Structures
  14. Altmetric Badge
    Chapter 13 Modeling of Fatigue Fracture of Coatings in Multi-cycle Friction Contact
  15. Altmetric Badge
    Chapter 14 Research and Modeling of Stress-Strain State and Fracture Strength of Triplexes at Temperatures 293–213 K
  16. Altmetric Badge
    Chapter 15 Influence of Low Temperature on Mechanical Properties of Carbon Steel P110 Estimated by Means of Small Punch Test
  17. Altmetric Badge
    Chapter 16 Crack Propagation in Various Double Cantilever Beam Geometric Configurations
  18. Altmetric Badge
    Chapter 17 Lateral Indentation and Impact Analyses on Curved Composite Shells
  19. Altmetric Badge
    Chapter 18 Structured Learning-Based Sinusoidal Modelling for Gear Diagnosis and Prognosis
  20. Altmetric Badge
    Chapter 19 Singular Stress Field of Interfacial Small Crack in Orthotropic Bonded Plate
  21. Altmetric Badge
    Chapter 20 Comparative Research on Calculation Methods of Stress Intensity Factors and Crack Propagation Criterion
  22. Altmetric Badge
    Chapter 21 Crack Identification Using eXtended IsoGeometric Analysis and Particle Swarm Optimization
  23. Altmetric Badge
    Chapter 22 PWR Fatigue Testing at SCK•CEN in the Framework of INCEFA+
  24. Altmetric Badge
    Chapter 23 The Effect of Technological and Structural Factors on the Strength of Polyethylene Adhesive Joints
  25. Altmetric Badge
    Chapter 24 Compression of Strain Load History Using Holder Exponents of Continuous Wavelet Transform
  26. Altmetric Badge
    Chapter 25 Structural Optimization for the Gusset Plate in the Boom Structure of Concrete Pump Truck
  27. Altmetric Badge
    Chapter 26 Failure Analysis of Prematurely Failed Hip Joint Implant Inside the Femur Bone
  28. Altmetric Badge
    Chapter 27 Comparative Study of Defect-Based and Plastic Damage-Based Approaches for Fatigue Lifetime Calculation of Selective Laser-Melted AlSi12
  29. Altmetric Badge
    Chapter 28 Fatigue Damage of Waterwall Tubes in a 1000 MW USC Boiler
  30. Altmetric Badge
    Chapter 29 Fatigue of Steels Used in the Manufacture of Components for Heavy Load Vehicles
  31. Altmetric Badge
    Chapter 30 Specimen Thickness Effects on Front Edge Shape of Fatigue Crack in Al7075-T6 Alloy
  32. Altmetric Badge
    Chapter 31 Finite Lifetime Estimation of Mechanical Assemblies Subjected to Fretting Fatigue Loading
  33. Altmetric Badge
    Chapter 32 Probabilistic Modeling of Coating Delamination
  34. Altmetric Badge
    Chapter 33 Failure of Giant Wheel Ride at an Amusement Park
  35. Altmetric Badge
    Chapter 34 Thermal-Mechanical Fatigue Analysis of a Main Steam Isolation Valve of a Boiling Water Reactor-5
  36. Altmetric Badge
    Chapter 35 Influence of Soft Particle Peening Treatment on Fatigue Strength of Aluminum Alloy A5052
  37. Altmetric Badge
    Chapter 36 Fatigue Life Calculation of Load-Adapted Hybrid Angular Contact Ball Bearings
  38. Altmetric Badge
    Chapter 37 The Influence of Hydrogen on Fatigue Fracture in Mooring Chain Steel
  39. Altmetric Badge
    Chapter 38 Monitoring Micro-damage Evolution in Structural Steel S355 Using Speckle Interferometry
  40. Altmetric Badge
    Chapter 39 On an Extension of the Fatemi and Socie Equation for Rolling Contact in Rolling Bearings
  41. Altmetric Badge
    Chapter 40 Durability of Steel Joints with Ductile Adhesive Subjected to Fatigue Tests
  42. Altmetric Badge
    Chapter 41 Effect of an Adhesive Bonding on the Fatigue Life of Advanced High Strength Steel Spot-Welds
  43. Altmetric Badge
    Chapter 42 Fatigue Life Predictions for L-Shaped Cracks
  44. Altmetric Badge
    Chapter 43 Modelling of Short Crack Arrest and Fatigue Propagation Using Non-local Fracture Criteria
  45. Altmetric Badge
    Chapter 44 Critical Analysis of Randomly Rough Surfaces for Contact Mechanics Through Statistical Simulation
  46. Altmetric Badge
    Chapter 45 Panel Test for New Developed Airbus A321 ACF Overwing Door and Surrounding Structure
  47. Altmetric Badge
    Chapter 46 Strain Rate Concentration Factor for Round and Flat Test Specimens
  48. Altmetric Badge
    Chapter 47 A Comparison Between Critical-Plane and Stress-Invariant Approaches for the Prediction of Fretting Fatigue Crack Nucleation
  49. Altmetric Badge
    Chapter 48 Effect of Short Crack Behavior on the Propagation Life Prediction for a Fretting Cylindrical Pad Configuration
  50. Altmetric Badge
    Chapter 49 Simulation of Cyclic Deformation Behavior of Ferritic P92 Steel Based on Unified Viscoplastic Model
  51. Altmetric Badge
    Chapter 50 Fatigue Life Analysis of Un-repaired and Repaired Metallic Substrate Using FRANC2D
  52. Altmetric Badge
    Chapter 51 Effect of Cryosoaking Period on Soft Tempering Temperature and Wear Mechanism in AISI H11 Tool Steel
  53. Altmetric Badge
    Chapter 52 Dry Wear Behavior of Basalt/Carbon-Reinforced Epoxy Composite by Taguchi Method
  54. Altmetric Badge
    Chapter 53 Wear Property of Epoxy Reinforced with Carbon Using a Response Surface Methodology
  55. Altmetric Badge
    Chapter 54 Microabrasive Wear of Titanium Chrome Plated
  56. Altmetric Badge
    Chapter 55 Experimental Investigate of the Wear and Friction Performance Considering Effects of Surface Topography and Lubricant
  57. Altmetric Badge
    Chapter 56 Experimental Simulation and Analysis of Die Casting Mould Wear
  58. Altmetric Badge
    Chapter 57 Structure and Properties of the New Antifriction Composite Materials for High-Temperature Friction Units
  59. Altmetric Badge
    Chapter 58 Comprehension of Thermomechanical Phenomena and Material Behavior During High Speed Contact
  60. Altmetric Badge
    Chapter 59 An Investigation into the Early Life Cycle Wear-Induced Failure of an All-Terrain Vehicle Ball Joint Cotter Pin
  61. Altmetric Badge
    Chapter 60 In-manufacture Running-in of Engine Components by Using the Triboconditioning® Process
  62. Altmetric Badge
    Chapter 61 Wear Behavior of ZrO 2 Particle Reinforced (Fe,Ni) Matrix Composite
  63. Altmetric Badge
    Chapter 62 Nanoscale Wear of Carbon Overcoat Subjected to Laser Heating in an Inert Gas Environment
  64. Altmetric Badge
    Chapter 63 Wear Simulation Method for Mechanical Seals Under Mixed Lubrication Using Flow Factors
  65. Altmetric Badge
    Chapter 64 Boride Coating on Titanium Alloys as Biomaterial in Wear and Fretting Applications
  66. Altmetric Badge
    Chapter 65 Wear Behavior of ZTA Reinforced Iron Matrix Composites
  67. Altmetric Badge
    Chapter 66 Friction and Wear of Mouthguard Material with a Laser-Textured Surface in Reciprocating Sliding Motion
  68. Altmetric Badge
    Chapter 67 Effect of Prior Ratcheting Deformation on Low Cycle Fatigue Behaviour of AISI 4340 Steel
  69. Altmetric Badge
    Chapter 68 Finite Element Model in Abrasion Analysis for Single-Asperity Scratch Test
  70. Altmetric Badge
    Chapter 69 Analysis of the Fretting Wear Phenomenon on the Surface Coatings of Form-Wound Coil
  71. Altmetric Badge
    Chapter 70 Tribological and Mechanical Properties of Polyester Based Composites with SiC Particles
  72. Altmetric Badge
    Chapter 71 Numerical Calculation of Local Adhesive Wear in Machine Elements Under Boundary Lubrication Considering the Surface Roughness
  73. Altmetric Badge
    Chapter 72 Numerical Investigation and Optimization of Loosening Behavior of Wheel Nuts for Passenger Cars
  74. Altmetric Badge
    Chapter 73 Optimization of Rigidity of Aluminum Alloy Wheels
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
4 X users
wikipedia
1 Wikipedia page

Citations

dimensions_citation
10 Dimensions

Readers on

mendeley
13 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the 7th International Conference on Fracture Fatigue and Wear
Published by
Springer Singapore, August 2018
DOI 10.1007/978-981-13-0411-8
ISBNs
978-9-81-130410-1, 978-9-81-130411-8
Authors

Abdel Wahab, Magd

Editors

Abdel Wahab, Magd

X Demographics

X Demographics

The data shown below were collected from the profiles of 4 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 13 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 13 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 4 31%
Student > Master 3 23%
Researcher 2 15%
Other 1 8%
Unknown 3 23%
Readers by discipline Count As %
Engineering 5 38%
Materials Science 4 31%
Environmental Science 1 8%
Unknown 3 23%