↓ Skip to main content

Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2018

Overview of attention for book
Cover of 'Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2018'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Effect of Vibration Frequency on Mechanical Behavior of Automotive Sensor
  3. Altmetric Badge
    Chapter 2 Applications of Additive Technologies in Realization of Customized Dental Prostheses
  4. Altmetric Badge
    Chapter 3 Researches Regarding the Use of Additive Technologies in the Construction of Water Aeration Elements
  5. Altmetric Badge
    Chapter 4 Researches on the Measurement of the Dissolved Oxygen Concentration in Stationary Waters
  6. Altmetric Badge
    Chapter 5 Experimental Results of Turbo-Aggregate Vibroacoustic Diagnosis Obtained with Vibro-Expert System for One Turbo Aggregate in Lukoil Refinery
  7. Altmetric Badge
    Chapter 6 Applications of Additive Technologies in the Food Industry
  8. Altmetric Badge
    Chapter 7 Additive Technologies and Materials for Realization of Elastic Elements
  9. Altmetric Badge
    Chapter 8 Analytical and Experimental Studies on Wear Behaviour of Cast and Heat Treated AlSi 12 CuMgNi and AlZn 6 MgCu Matrix Composites Reinforced with Ceramic Particles, Under Sliding Conditions
  10. Altmetric Badge
    Chapter 9 Mechatronic System for the Promotion of Physical Activity in People with Motor Limitations
  11. Altmetric Badge
    Chapter 10 Automated System for Remote Defect Inspection
  12. Altmetric Badge
    Chapter 11 Intelligent Hydraulic Power Generating Group
  13. Altmetric Badge
    Chapter 12 A Closed Form Solution for Non-linear Deflection of Non-straight Ludwick Type Beams Using Lie Symmetry Groups
  14. Altmetric Badge
    Chapter 13 Pipe Leakage Detection Using Humidity and Microphone Sensors – A Review
  15. Altmetric Badge
    Chapter 14 Current State of Anthropometric Parameters Measurement with Relevance for Advanced Lens Optometric Compensation
  16. Altmetric Badge
    Chapter 15 Study on the Current State of Research in the Field of Artificial Clamping Systems Using Astringent Electroadhesion Technology
  17. Altmetric Badge
    Chapter 16 Modelling the Tibial Bone Using CAD Techniques, Starting from the 3D Scan Model
  18. Altmetric Badge
    Chapter 17 Ankle-Knee Rehabilitation System
  19. Altmetric Badge
    Chapter 18 A Review of Fault Diagnosis in Mechatronics Systems
  20. Altmetric Badge
    Chapter 19 Pipe Cracks Detection Methods – A Review
  21. Altmetric Badge
    Chapter 20 Design and Analysis for Motors Control of a 4-DOF Parallel Robot
  22. Altmetric Badge
    Chapter 21 Intelligent Mechatronics and Cyber-Mechatronics Ecosystems Developed in “ECOSIN - MECATRON” Research Infrastructure
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
2 Dimensions

Readers on

mendeley
4 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2018
Published by
Springer International Publishing, October 2018
DOI 10.1007/978-3-319-96358-7
ISBNs
978-3-31-996357-0, 978-3-31-996358-7
Editors

Gheorghe, Gheorghe I.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 4 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 4 100%

Demographic breakdown

Readers by professional status Count As %
Lecturer 1 25%
Student > Postgraduate 1 25%
Student > Master 1 25%
Unknown 1 25%
Readers by discipline Count As %
Engineering 3 75%
Unknown 1 25%