↓ Skip to main content

Vehicle and Automotive Engineering 2

Overview of attention for book
Cover of 'Vehicle and Automotive Engineering 2'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Investigation of Diesel – n-Butanol Fuel Blend in the Function of Pre-injection Angle
  3. Altmetric Badge
    Chapter 2 Optimal Manufacturing Technology Determination for the Main Parts of a Rotary Internal Combustion Engine
  4. Altmetric Badge
    Chapter 3 Review Article: Effect of Ethanol-Gasoline Fuel Blends on the Exhaust Emissions and Characteristics of SI Engines
  5. Altmetric Badge
    Chapter 4 A Review on the Effect of Alternative Fuels on the Friction and Wear of Internal Combustion Engines
  6. Altmetric Badge
    Chapter 5 Human-Electric Hybrid Drives in Medium-Sized Cities by Daily Traffic
  7. Altmetric Badge
    Chapter 6 Development of an Electric Powered Light-Stilt-Tractor for the Application of Biological Plant Protection Products in Corn
  8. Altmetric Badge
    Chapter 7 Hybrid Drivetrain of a Self-driving Go-Kart
  9. Altmetric Badge
    Chapter 8 Modular Battery Cell Model for Thermal Management Modelling
  10. Altmetric Badge
    Chapter 9 Analysis of Steering Geometry and Design of Steering Mechanisms for Four-Axle Vehicles
  11. Altmetric Badge
    Chapter 10 Durability Assessment: A Virtual Proving Ground Approach
  12. Altmetric Badge
    Chapter 11 Characterization of the Vehicle Roll Movement with the Dynamic Chassis Simulator
  13. Altmetric Badge
    Chapter 12 Modelling of Heat Generation in Vehicle Components Made of Rubber Caused by Finite Deformations
  14. Altmetric Badge
    Chapter 13 Fatigue Performance of GMA-Brazed Non-load Carrying Joints Made of Ultra-High-Strength Steel
  15. Altmetric Badge
    Chapter 14 Milkrun Based In-plant Supply – An Automotive Approach
  16. Altmetric Badge
    Chapter 15 Copper Rotor Technology for High Efficiency Motors
  17. Altmetric Badge
    Chapter 16 Measurements of Vibration by Laser Doppler Method in the Course of Drilling
  18. Altmetric Badge
    Chapter 17 Solidification Path of NemAlloy
  19. Altmetric Badge
    Chapter 18 Logistics and Digitization
  20. Altmetric Badge
    Chapter 19 What Industry 4.0 Means for Just-In-Sequence Supply in Automotive Industry?
  21. Altmetric Badge
    Chapter 20 Preliminary Investigations for the Effect of Cutting Tool Edge Geometry in High-Feed Face Milling
  22. Altmetric Badge
    Chapter 21 Correlation Between Process Parameters and Cutting Forces in the Face Milling of Steel
  23. Altmetric Badge
    Chapter 22 Analysis of Machining Time and Material Removal Performance as Factors Influencing Efficiency and Profitability
  24. Altmetric Badge
    Chapter 23 Analysis of Supply Chain Efficiency in Blending Technologies
  25. Altmetric Badge
    Chapter 24 Significance of the Residual Stress Monitoring in the Automotive Industry
  26. Altmetric Badge
    Chapter 25 Design and Analysis of Composite Oil Pan for Automotive Vehicle
  27. Altmetric Badge
    Chapter 26 Advanced Materials Handling Processes and Devices in the Automotive Industry
  28. Altmetric Badge
    Chapter 27 The Examination of the Effects of Strontium Content on the Properties of Cylinder Heads
  29. Altmetric Badge
    Chapter 28 Conceptual Design of a Measurement- and Data Acquisition System
  30. Altmetric Badge
    Chapter 29 Noise Reduction for Voice-Activated Car Commands
  31. Altmetric Badge
    Chapter 30 Creating OpenCRG Road Surface Model from Terrestrial Laser Scanning Data for Autonomous Vehicles
  32. Altmetric Badge
    Chapter 31 Fuzzy Rule Interpolation Based Object Tracking and Navigation for Social Robot
  33. Altmetric Badge
    Chapter 32 Further Development of an AGV Control System
  34. Altmetric Badge
    Chapter 33 Accident Reconstruction Tools, with Special Attention to Autonomous Vehicles
  35. Altmetric Badge
    Chapter 34 Development of Robust H-Infinity Steering Control System for Autonomous Vehicles
  36. Altmetric Badge
    Chapter 35 Trajectory Planning for Automated Vehicles – A Basic Approach
  37. Altmetric Badge
    Chapter 36 Functional Description of Control Variables in Optimal Control and Application to Maneuver Planning for Autonomous Vehicles
  38. Altmetric Badge
    Chapter 37 A SUMO-Based Hardware-in-the-Loop V2X Simulation Framework for Testing and Rapid Prototyping of Cooperative Vehicular Applications
  39. Altmetric Badge
    Chapter 38 Verification of Rolling Element Bearing Defect Frequencies by Vibration Measurements on Bearings with Artificial Faults on the Outer/Inner Rings
  40. Altmetric Badge
    Chapter 39 Vehicular Can Traffic Based Microtracking for Accident Reconstruction
  41. Altmetric Badge
    Chapter 40 Investigation of Pressure Rise in Automotive Airbags
  42. Altmetric Badge
    Chapter 41 Comparison of Data Required for Accident Reconstruction Based on Crash Test
  43. Altmetric Badge
    Chapter 42 Presentation of Modern Accident Reconstruction Procedures - Case Study
  44. Altmetric Badge
    Chapter 43 Sensitivity Investigation of Failure Mode and Effect Analysis
  45. Altmetric Badge
    Chapter 44 Assembly System Planning in Automotive Industry with Use of Discrete Event Simulation
  46. Altmetric Badge
    Chapter 45 Survey About the PSOC5 LABBOOK
  47. Altmetric Badge
    Chapter 46 10 Years of Pneumobile Competition at the University of Miskolc
  48. Altmetric Badge
    Chapter 47 Characterization of Surface Roughness for Growth Models
  49. Altmetric Badge
    Chapter 48 Airbox Design, Analysis and Improvement for a High Performance Road Racing Sidecar
  50. Altmetric Badge
    Chapter 49 Numerical and Experimental Study of Finned Tube Heat Transfer Characteristics
  51. Altmetric Badge
    Chapter 50 Quality Control and Refinement of Car-Body Surfaces
  52. Altmetric Badge
    Chapter 51 Optimization of Springs Applied in Vehicle Suspension Structure
  53. Altmetric Badge
    Chapter 52 Design and Optimization of a Bus Steering Linkage by Using Response Surface Methodology
  54. Altmetric Badge
    Chapter 53 Research and Application of Industrial Robot Manipulators in Vehicle and Automotive Engineering, a Survey
  55. Altmetric Badge
    Chapter 54 Cost Calculation of Thin-Walled Structures Using Different Manufacturing Techniques
  56. Altmetric Badge
    Chapter 55 Elastic Plastic Analysis of Elliptical Plates
  57. Altmetric Badge
    Chapter 56 ε-Optimum Reliability-Based Cost Design of Longitudinally Stiffened Welded Steel Plates
  58. Altmetric Badge
    Chapter 57 Supply Chain Optimization in Automotive Industry: A Comparative Analysis of Evolutionary and Swarming Heuristics
  59. Altmetric Badge
    Chapter 58 Resistance Spot Welding of 7075 Aluminium Alloy
  60. Altmetric Badge
    Chapter 59 The Effect of Solution Annealing and Ageing During the RSW of 6082 Aluminium Alloy
  61. Altmetric Badge
    Chapter 60 Dissimilar Resistance Spot Welding of Ferrite-Martensite Dual Phase Steel/Low Carbon Steel: Phase Transformations and Mechanical Properties
  62. Altmetric Badge
    Chapter 61 MIG Welding and MIG Brazing of Different Austenitic Stainless Steel Grades
  63. Altmetric Badge
    Chapter 62 Investigation of the Ultrasound Welded Aluminium Joint Microstructure
  64. Altmetric Badge
    Chapter 63 Fatigue Crack Propagation Limit Curves for High Strength Steels and Their Welded Joints Based on Two-Stage Relationship
  65. Altmetric Badge
    Chapter 64 Mismatch Effect Influence on the HCF Resistance of High Strength Steels and Their GMA Welded Joints
  66. Altmetric Badge
    Chapter 65 Arc Welding of Zinc Coated High Strength Steels
  67. Altmetric Badge
    Chapter 66 Mechanical Properties in the Physically Simulated Heat-Affected Zones of 500 MPa Offshore Steel for Arctic Conditions
  68. Altmetric Badge
    Chapter 67 Thermoelectric Power Measurements on Duplex Stainless Steel Weldments
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
3 Dimensions

Readers on

mendeley
40 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Vehicle and Automotive Engineering 2
Published by
Springer International Publishing, June 2018
DOI 10.1007/978-3-319-75677-6
ISBNs
978-3-31-975676-9, 978-3-31-975677-6
Editors

Jármai, Károly, Bolló, Betti

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 40 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 40 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 5 13%
Researcher 4 10%
Student > Ph. D. Student 3 8%
Student > Bachelor 1 3%
Professor > Associate Professor 1 3%
Other 0 0%
Unknown 26 65%
Readers by discipline Count As %
Engineering 8 20%
Computer Science 2 5%
Materials Science 1 3%
Nursing and Health Professions 1 3%
Unknown 28 70%