↓ Skip to main content

Mechanics of Composite and Multi-functional Materials, Volume 7

Overview of attention for book
Cover of 'Mechanics of Composite and Multi-functional Materials, Volume 7'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Mechanics of Multifunctional Wings with Solar Cells for Robotic Birds
  3. Altmetric Badge
    Chapter 2 Optimization of Magnetic and Electrical Properties of New Aluminium Matrix Composite Reinforced with Magnetic Nano Iron Oxide (Fe 3 O 4 )
  4. Altmetric Badge
    Chapter 3 Manufacturing and Characterization of Anisotropic Membranes for Micro Air Vehicles
  5. Altmetric Badge
    Chapter 4 Compliant Artificial Skins to Enable Robotic Sensing and Training by Touch
  6. Altmetric Badge
    Chapter 5 Electrical Impedance Spectroscopy for Structural Health Monitoring
  7. Altmetric Badge
    Chapter 6 Soliton-based Sensor/Actuator for Delamination and Weak Bond Detection in Laminated Composites
  8. Altmetric Badge
    Chapter 7 In Pursuit of Bio-inspired Triboluminescent Multifunctional Composites
  9. Altmetric Badge
    Chapter 8 Passive-Only Defect Detection and Imaging in Composites Using Diffuse Fields
  10. Altmetric Badge
    Chapter 9 Buckypaper-Cored Novel Photovoltaic Sensors for In-Situ Structural Health Monitoring of Composite Materials Using Hybrid Quantum Dots
  11. Altmetric Badge
    Chapter 10 Viscoelasticity of Glass-Forming Materials: What About Inorganic Sealing Glasses?
  12. Altmetric Badge
    Chapter 11 Unified Creep Plasticity Damage (UCPD) Model for Rigid Polyurethane Foams
  13. Altmetric Badge
    Chapter 12 Mechanical Behavior Characterization of Polyurethane Used in Bend Stiffener
  14. Altmetric Badge
    Chapter 13 Effect of Pressure on Damping Properties of Granular Polymeric Materials
  15. Altmetric Badge
    Chapter 14 Wideband Material Characterization of Viscoelastic Materials
  16. Altmetric Badge
    Chapter 15 On the Mechanical Response of Polymer Fiber Composites Reinforced with Nanoparticles
  17. Altmetric Badge
    Chapter 16 Design of Al-Nb 2 Al Composites Through Powder Metallurgy
  18. Altmetric Badge
    Chapter 17 Influence of Heat Treatments on Microstructure and Mechanical Behaviour of Compressible Al Matrix, Low Density Composites
  19. Altmetric Badge
    Chapter 18 Large Deformation of Particle-Filled Rubber Composites
  20. Altmetric Badge
    Chapter 19 Advanced Structured Composites as Novel Phononic Crystals and Acoustic Metamaterials
  21. Altmetric Badge
    Chapter 20 Low-Cost Production of Epoxy Matrix Composites Reinforced with Scarp Rubber, Boron, Glass Bubbles and Alumina
  22. Altmetric Badge
    Chapter 21 Prediction of Flexural Properties of Coir Polyester Composites by ANN
  23. Altmetric Badge
    Chapter 22 Filler-Reinforced Poly(Glycolic Acid) for Degradable Frac Balls Under High-Pressure Operation
  24. Altmetric Badge
    Chapter 23 Characteristics of Elastomeric Composites Reinforced with Carbon Black and Epoxy
  25. Altmetric Badge
    Chapter 24 Mechanical Properties of Extensively Recycled High Density Polyethylene
  26. Altmetric Badge
    Chapter 25 Mechanical Characterization and Preliminary Modeling of PEEK
  27. Altmetric Badge
    Chapter 26 Characterization of the Nonlinear Elastic Behavior of Chinchilla Tympanic Membrane Using Micro-fringe Projection
  28. Altmetric Badge
    Chapter 27 Compression of Silicone Foams
  29. Altmetric Badge
    Chapter 28 Voltage Control of Single Magnetic Domain Nanoscale Heterostructure, Analysis and Experiments
  30. Altmetric Badge
    Chapter 29 Active Damping in Polymer-Based Nanocomposites
  31. Altmetric Badge
    Chapter 30 MWCNT and CNF Cementitious Nanocomposites for Enhanced Strength and Toughness
  32. Altmetric Badge
    Chapter 31 Small Scale Thermomechanics in Si with an Account of Surface Stress Measurements
  33. Altmetric Badge
    Chapter 32 Magnetorheological Elastomers: Experimental and Modeling Aspects
  34. Altmetric Badge
    Chapter 33 Failure Criteria of Composite Materials Under Static and Dynamic Loading
  35. Altmetric Badge
    Chapter 34 A Theory of Multi-Constituent Finitely-Deforming Composite Materials Subject to Thermochemical Changes with Damage
  36. Altmetric Badge
    Chapter 35 Pressurized In-Situ Dynamic Mechanical Thermal Analysis Method for Oilfield Polymers and Composites
  37. Altmetric Badge
    Chapter 36 HPHT Hot-Wet Resistance of Reinforcement Fibers and Fiber-Resin Interface of Advanced Composite Materials
  38. Altmetric Badge
    Chapter 37 Laboratory Testing on Composites to Replicate Oil and Gas Service
  39. Altmetric Badge
    Chapter 38 Measurement of Thermal Deformation of CFRP Under Rapid Heating
  40. Altmetric Badge
    Chapter 39 Performance of Patch and Full-Encirclement Bonded Composite Repairs
  41. Altmetric Badge
    Chapter 40 Meso-Scale Deformation Behavior of Polymer Bonded Energetic Material Under Quasi-Static Compression
  42. Altmetric Badge
    Chapter 41 Subsidence Modeling and Analysis for Sand Shear Strength Parameter Testing
  43. Altmetric Badge
    Chapter 42 Determining the Shear Relaxation Modulus and Constitutive Models for Polyurea and Polyurea-Based Composite Materials from Dynamic Mechanical Testing Data
  44. Altmetric Badge
    Chapter 43 Long Term Stability of UHMWPE Fibers
  45. Altmetric Badge
    Chapter 44 Age Deformation After Stamping of Carbon Fiber Reinforced Polycarbonate Laminates
  46. Altmetric Badge
    Chapter 45 Incremental Formulation for Coupled Viscoelasticity and Hydrolock Effect in Softwood
  47. Altmetric Badge
    Chapter 46 Accelerated Creep Testing of CFRP with the Stepped Isostress Method
  48. Altmetric Badge
    Chapter 47 Coupon-Based Qualification for the Fatigue of Composite Repairs of Pressure Equipment
  49. Altmetric Badge
    Chapter 48 Effect of a Composite Coupler on Automotive Windshield Wiper System Chatter
  50. Altmetric Badge
    Chapter 49 Through Process Modeling Approach: Effect of Microstructure on Mechanical Properties of Fiber Reinforced Composites
  51. Altmetric Badge
    Chapter 50 Molding Strain of Glass Fibers of Model GFRP
  52. Altmetric Badge
    Chapter 51 Effect of Molding Conditions on Process-Induced Deformation of Asymmetric FRP Laminates
  53. Altmetric Badge
    Chapter 52 Simulation of High Rate Failure Mechanisms in Composites During Quasi-static Testing
  54. Altmetric Badge
    Chapter 53 Meso-scale Deformation Mechanisms of Polymer Bonded Energetic Materials Under Dynamic Loading
  55. Altmetric Badge
    Chapter 54 High Strain Rate Tensile Behavior of Fiber Metal Laminates
  56. Altmetric Badge
    Chapter 55 Compressive Response of Cellular Core Filled with Micro-Sphere Embedded Aluminum
  57. Altmetric Badge
    Chapter 56 Erratum to: Advanced Structured Composites as Novel Phononic Crystals and Acoustic Metamaterials
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Readers on

mendeley
73 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Mechanics of Composite and Multi-functional Materials, Volume 7
Published by
Springer International Publishing, October 2015
DOI 10.1007/978-3-319-21762-8
ISBNs
978-3-31-921761-1, 978-3-31-921762-8
Editors

Ralph, Carter, Silberstein, Meredith, Thakre, Piyush R., Singh, Raman

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 73 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United Kingdom 1 1%
United States 1 1%
Unknown 71 97%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 25 34%
Student > Master 9 12%
Student > Bachelor 8 11%
Researcher 7 10%
Student > Doctoral Student 5 7%
Other 9 12%
Unknown 10 14%
Readers by discipline Count As %
Engineering 39 53%
Materials Science 9 12%
Agricultural and Biological Sciences 3 4%
Chemical Engineering 3 4%
Computer Science 2 3%
Other 6 8%
Unknown 11 15%