↓ Skip to main content

Advances in Cryogenic Engineering Materials

Overview of attention for book
Cover of 'Advances in Cryogenic Engineering Materials'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Cryogenic Properties of Several Copolyesters
  3. Altmetric Badge
    Chapter 2 Fracture Behavior of Polymers at Cryogenic Temperatures
  4. Altmetric Badge
    Chapter 3 Improvement of Fracture Toughness of Epoxy Resins at Cryogenic Temperature
  5. Altmetric Badge
    Chapter 4 The Tensile Properties of Polyimide Film at Cryogenic Temperatures and Radiation Effects On Polyimide Films
  6. Altmetric Badge
    Chapter 5 Factors Influencing the Rate of Gas Evolution From Epoxide Resins During Irradiation
  7. Altmetric Badge
    Chapter 6 Epoxy Resin Developments for the Atlas and CMS Superconducting Magnets Impregnation
  8. Altmetric Badge
    Chapter 7 Combined Mechanical and Electrical Testing of a Full-Scale TF Shear Key Prototype
  9. Altmetric Badge
    Chapter 8 Acoustic Emission Studies on Irradiated Plastic-Copper Interfaces in Mode I at Room Temperature and at 77K
  10. Altmetric Badge
    Chapter 9 Shear Compression Testing of Glass-Fibre Steel Specimens After 4K Reactor Irradiation: Present Status and Facility Upgrade
  11. Altmetric Badge
    Chapter 10 Conceptual Design Analysis of 4K Irradiation Facility in Korean Hanaro Research Reactor
  12. Altmetric Badge
    Chapter 11 Failure Criteria for Low-Temperature Irradiated Organic Composite Insulation Systems
  13. Altmetric Badge
    Chapter 12 Shear Strength of Irradiated Insulation under Combined Shear/Compression Loading
  14. Altmetric Badge
    Chapter 13 Tensile and Fracture Behavior in Mode I and Mode II of Fiber Reinforced Plastics Following Reactor Irradiation
  15. Altmetric Badge
    Chapter 14 New Combined Shear and Compression Test Method
  16. Altmetric Badge
    Chapter 15 Interlaminar Shear and Flexural Strength of Fiber Reinforced Plastics at 77 K After Room and Low-Temperature Reactor Irradiation
  17. Altmetric Badge
    Chapter 16 Applicability of a Pitch Carbon FRP Thermal Shield Under Neutron Irradiation — a Theoretical Estimate
  18. Altmetric Badge
    Chapter 17 Elastic Properties of Composite Iter Insulation Systems
  19. Altmetric Badge
    Chapter 18 Fracture Behavior of G-10 Woven Glass-Epoxy Laminates at Low Temperatures
  20. Altmetric Badge
    Chapter 19 Transient Thermal-Mechanical Behavior of Cracked Glass-Cloth-Reinforced Epoxy Laminates at Low Temperatures
  21. Altmetric Badge
    Chapter 20 Thermal Strain of Pipes Composed with High Strength Polyethylene Fiber Reinforced Plastics at Cryogenic Temperatures
  22. Altmetric Badge
    Chapter 21 Fatigue Behavior of Polymers and Composites at Cryogenic Temperatures
  23. Altmetric Badge
    Chapter 22 Low-Temperature Thermal Properties from the EU Testing Program for Potential ITER Insulation
  24. Altmetric Badge
    Chapter 23 Stress Analysis of Shear/Compression Test
  25. Altmetric Badge
    Chapter 24 Irradiation Effects on Interlaminar Shear Strength of GFRP at Low Temperature
  26. Altmetric Badge
    Chapter 25 Development of Radiation Resistant Organic Composites for Cryogenic Use
  27. Altmetric Badge
    Chapter 26 Mechanics of a Composite Structure of GFRP Insulators and Superconductors with a GAP
  28. Altmetric Badge
    Chapter 27 Mechanical Test Results from the EU Testing Program for Potential ITER Insulation Material
  29. Altmetric Badge
    Chapter 28 Electrical Breakdown Strength Results from the EU Testing Program for Potential ITER Insulation
  30. Altmetric Badge
    Chapter 29 Radiation Tests at Cryogenic Temperature on Selected Organic Materials for LHC
  31. Altmetric Badge
    Chapter 30 Investigation of Electrical Insulation Applied in Cryoalternators
  32. Altmetric Badge
    Chapter 31 Fatigue of Crossply Carbon Fiber Composites at Cryogenic Temperatures
  33. Altmetric Badge
    Chapter 32 The Mechanical Properties of Glass Fabric Composites Following Heat Treatment and Thermal Cycling
  34. Altmetric Badge
    Chapter 33 Shear and Compressive Properties of Insulation after Irradiation at 4 K
  35. Altmetric Badge
    Chapter 34 Composite Support Structures for Cryogenic Systems
  36. Altmetric Badge
    Chapter 35 Analysis of Two-Dimensional Flow of Epoxy Fluids Through Woven Glass Fabric
  37. Altmetric Badge
    Chapter 36 Mechanical Properties of Scandium-Alloyed Aluminium Alloys and Their Welded Joints at Cryogenic Temperatures
  38. Altmetric Badge
    Chapter 37 VAMAS Tests of Structural Materials on Aluminum Alloy and Composite Material at Cryogenic Temperatures
  39. Altmetric Badge
    Chapter 38 Crack Tip Shielding in 2090 Al-Li Alloy
  40. Altmetric Badge
    Chapter 39 Effect of Yttrium on Cryogenic Mechanical Properties and Fracture Behavior of Al-Li-Cu-Mg-Zr Alloy
  41. Altmetric Badge
    Chapter 40 Effect of Cr and Ni on the Temperature Dependence of Deformation Behavior and Shape Memory Effects in Fe-Mn-Si Alloys
  42. Altmetric Badge
    Chapter 41 Tensile Properties and Deformation-Induced Martensitic Transformation at Cryogenic Temperatures in Fe-Cr-Ni-Mn-N Alloys
  43. Altmetric Badge
    Chapter 42 Fracture Toughness of Partially Welded Joints of SUS316 in High Magnetic Field at 4K
  44. Altmetric Badge
    Chapter 43 Development of High Strength Austenitic Stainless Steel for Conduit of Nb 3 Al Conductor
  45. Altmetric Badge
    Chapter 44 Cryogenic Mechanical Properties of Heavy-Section Weldment in High-Manganese Austenitic Steel
  46. Altmetric Badge
    Chapter 45 The Cryogenic Tensile and Fracture Toughness Properties of Austenitic Steels Given Low Temperature, Short-Time Nb 3 Sn Reaction Heat Treatments
  47. Altmetric Badge
    Chapter 46 Effects of Specimen Thickness and Side-Groove on Fracture Toughness of JN1 Austenitic Stainless Steel Rolled Plate at Liquid Helium Temperature
  48. Altmetric Badge
    Chapter 47 A New Test Method for Characterizing Low Temperature Structural Materials
  49. Altmetric Badge
    Chapter 48 Fatigue Life Prediction for Finite Ratchetting of Bellows at Cryogenic Temperatures
  50. Altmetric Badge
    Chapter 49 Cryogenic Mechanical Properties and Hydrogen Embrittlement of SAF2205
  51. Altmetric Badge
    Chapter 50 Fatigue Tests and Life Estimation of Incoloy Alloy 908
  52. Altmetric Badge
    Chapter 51 Production and Properties of Incoloy® Alloy 908 Tubing for Sheathing of Nb 3 Sn Superconducting Cables
  53. Altmetric Badge
    Chapter 52 Characterization of Simulated Production Welds in Alloy 908
  54. Altmetric Badge
    Chapter 53 The Effects of Oxygen Concentration, Stress, Temperature, and Cold Work on the Constant-Load Stress-Rupture Behavior of INCOLOY Alloy 908
  55. Altmetric Badge
    Chapter 54 Control of Stress-Accelerated Oxygen-Assisted Cracking of INCOLOY® Alloy 908 Sheath for Nb 3 Sn Cable-in-Conduit
  56. Altmetric Badge
    Chapter 55 Evaluation of Mechanical Properties for Spherical Magnetic Regenerator Materials Fabricated by Rapid Solidification Process
  57. Altmetric Badge
    Chapter 56 Comparison of the Magnetocaloric Effect Derived from Heat Capacity, Direct, and Magnetization Measurements
  58. Altmetric Badge
    Chapter 57 Magnetic Properties of Amorphous Gd 70 (Fe, Ni) 30 and Dy 70 (Fe, Ni) 30 Alloys
  59. Altmetric Badge
    Chapter 58 Development of Rare Earth Regenerator Materials in Fine Wire Form
  60. Altmetric Badge
    Chapter 59 Composite Magnetic Refrigerants for an Ericsson Cycle: New Method of Selection Using a Numerical Approach
  61. Altmetric Badge
    Chapter 60 New Er-Based Materials for Active Magnetic Refrigeration Below 20K
  62. Altmetric Badge
    Chapter 61 Thermal Properties of (Dy x Gd 1-x ) 3 Ga 5 O 12 Garnet Single Crystals
  63. Altmetric Badge
    Chapter 62 Utilization of the Magnetic Entropy in Active Magnetic Regenerator Materials
  64. Altmetric Badge
    Chapter 63 The (Dy 1-x Er x )Al 2 Alloys as Active Magnetic Regenerators for Magnetic Refrigeration
  65. Altmetric Badge
    Chapter 64 Thermal Relaxation Calorimeter for Measurement of Specific Heat of Small Samples Between 4 and 35 K
  66. Altmetric Badge
    Chapter 65 The Fatigue and Tensile Properties of Dispersion Strengthened Copper at Low Temperatures (77 to 295K)
  67. Altmetric Badge
    Chapter 66 ECAE-Processed Cu-Nb and Cu-Ag Nanocomposite Wires for Pulse Magnet Applications
  68. Altmetric Badge
    Chapter 67 A Transient Method for Measuring Thermophysical Properties of Solids at Low Temperatures
  69. Altmetric Badge
    Chapter 68 Molecular Dynamics Simulation of Crack Propagation in α -Iron at Cryogenic Temperatures
  70. Altmetric Badge
    Chapter 69 Formation Mechanism of (Bi, Pb) 2 Sr 2 Ca 2 Cu 3 O 10 Phase and Critical Current in Silver Clad Superconducting Tape
  71. Altmetric Badge
    Chapter 70 Field-Angle Dependence of Critical Current in Ag-Sheathed Bi-2212 and Bi-2223 Tapes
  72. Altmetric Badge
    Chapter 71 Specific Heat and Thermal Conductivity of a Single Crystal-Like Bi 2 Sr 2 CaCu 2 O 8+x High-Tc Superconductor
  73. Altmetric Badge
    Chapter 72 Weak Links and Critical Current Anisotropy in Melt-Textured HTSC Ceramics Studied by Magneto-Optical Express Control
  74. Altmetric Badge
    Chapter 73 J c Performance of Ag Sheathed Bi-2223 HTS Composite Conductors
  75. Altmetric Badge
    Chapter 74 Microstructures and Superconducting Properties of Ag Alloy Sheathed Bi-2223 Tapes
  76. Altmetric Badge
    Chapter 75 A New Method to Determine the Coupling Strength of the Interfaces in Seeded-Melt Textured YBa 2 Cu 3 O x
  77. Altmetric Badge
    Chapter 76 Critical Current, Flux Pinning, and Hysteretic Loss in Round Multifilamentary Bi:2212/Ag Strands
  78. Altmetric Badge
    Chapter 77 AC Loss Measurements on Multifilamentary BSCCO 2223 High-Temperature Superconductors
  79. Altmetric Badge
    Chapter 78 Irreversibility Line in Superconductor as Line of Constant Shielding Current Density
  80. Altmetric Badge
    Chapter 79 Properties of BI(2212) Short and Long Wires and Tapes
  81. Altmetric Badge
    Chapter 80 Superconducting Properties of Sm and Nd Substituted BPSCCO-2212 System
  82. Altmetric Badge
    Chapter 81 Flux Pinning by Precipitates in Melt-Processed YBa 2 Cu 3 O x — A Cavity Model
  83. Altmetric Badge
    Chapter 82 Processing and Properties of BSCCO 2212 Ag and Ag Alloy Multifilament Round Wires
  84. Altmetric Badge
    Chapter 83 Critical Current Density and Irreversibility Line of CuBa 2 Ca 3 Cu 4 O y
  85. Altmetric Badge
    Chapter 84 Dissipation in BSCCO Superconductors: Influence of Pinning Centres
  86. Altmetric Badge
    Chapter 85 Angular Dependence of the Flux Pinning For YBa 2 Cu 3 O y /PrBa 2 Cu 3 O y Superlattice
  87. Altmetric Badge
    Chapter 86 Critical Current Characteristics of Step-Edge YBa 2 Cu 3 O y Weak Links
  88. Altmetric Badge
    Chapter 87 Strain Reduced Critical Current In Bi-2223/Ag Superconductors Under Axial Tension and Compression
  89. Altmetric Badge
    Chapter 88 Thermal Boundary Resistance Problems in Melt-Texturized YBCO in a Ni Sheath
  90. Altmetric Badge
    Chapter 89 Flux Line Lattice Disorder Induced by Pinning Centers and Critical Currents in YBa 2 Cu 3 O 7-δ
  91. Altmetric Badge
    Chapter 90 Effect of Colony Boundaries, Defects and 2212 Phase on J c of Ag-Clad BSCCO Tapes
  92. Altmetric Badge
    Chapter 91 Preparation of HgBaCaCuO Polycrystals and Silver Sheathed Tapes by a Two-Zone Technique
  93. Altmetric Badge
    Chapter 92 Reduced pO 2 Melt Processing of YBa 2 Cu 3 O 6+x
  94. Altmetric Badge
    Chapter 93 Superconducting Properties of Bi 2 Sr 2 CaCu 2 O y Tape Prepared by the Continuous Heat Treatment Technique
  95. Altmetric Badge
    Chapter 94 High-T c Superconducting Wires and Tapes Prepared by “Continuous Tube Forming/Filling (CTFF)” Technique
  96. Altmetric Badge
    Chapter 95 Synthesis and Characterization of YBa 2 Cu 3 O Y and LaSrGaO y Thin Films
  97. Altmetric Badge
    Chapter 96 The Development of Twisted High-Temperature Superconducting Composites
  98. Altmetric Badge
    Chapter 97 Formation of (Bi,Pb)-2223 Phase during Solidifying and Sintering
  99. Altmetric Badge
    Chapter 98 Fabrication and Texture Characterization of Bulk (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O x and Bi 2 Sr 2 CaCu 2 O x Superconductors
  100. Altmetric Badge
    Chapter 99 Improvements in Critical Current Density for Bi 1.8 Pb 0.4 Sr 2 Ca 2 Cu 3 Ox (2223) OPIT Tapes by Increasing Ag-Superconductor Contact
  101. Altmetric Badge
    Chapter 100 The Effect of Fabrication Variables on Filament Quality of Mono and Multifilamentary BSCCO-2212 Round Wires
  102. Altmetric Badge
    Chapter 101 Advances in Fabrication of Mono- and Multifilament Ag-Clad BSCCO Superconductors
  103. Altmetric Badge
    Chapter 102 Effect of Precursor Powder on the Properties of Silver-Clad Bi-2223 Superconducting Wires and Tapes
  104. Altmetric Badge
    Chapter 103 Fabrication of Superconducting Joints for Ag-Clad BSCCO Conductors
  105. Altmetric Badge
    Chapter 104 Development of Bi-2212 Tapes and Coils Applying the Dip-Coating Process
  106. Altmetric Badge
    Chapter 105 Preventing Bubbles in Long Lengths of Ag-Sheathed 2212 Tape
  107. Altmetric Badge
    Chapter 106 Improving J c Reproducibility in Ag-Sheathed Bi-Based Tapes by a Non-Linear Temperature-Time Sintering Process
  108. Altmetric Badge
    Chapter 107 Synthesis of Long YBCO, BSCCO HTSC Coatings by Gas-Detonation Spraying Technology and Gas-Flame Method of Crystallization
  109. Altmetric Badge
    Chapter 108 High Tensile Bi-2223 Ag-MgO Sheathed Oxide Superconductor
  110. Altmetric Badge
    Chapter 109 Investigation of Different Angle Joining of Superconducting Tapes
  111. Altmetric Badge
    Chapter 110 Improved Bi-2212/Ag Performance as a Competitor to Bi-2223/Ag in High-T c Superconductor Wire Applications
  112. Altmetric Badge
    Chapter 111 Recent Progress in BPSCCO Wire Fabrication and Application Prototypes
  113. Altmetric Badge
    Chapter 112 Control of Precursors for BSCCO Powder-in-Tube Process by Cryoprocessing
  114. Altmetric Badge
    Chapter 113 Effect of Oxygen Partial Pressure on Superconducting Properties of Bi-2212/Ag Tapes Prepared by Doctor-Blade Method
  115. Altmetric Badge
    Chapter 114 Evaluation of a Strengthening and Insulation System for High Temperature BSCCO-2223 Superconducting Tape
  116. Altmetric Badge
    Chapter 115 Preparation and Properties of Bi-Sr-Ca-Cu-O Made by a Chemical Precipitation Method
  117. Altmetric Badge
    Chapter 116 Development of a Scalable Tl-1223 Tape Process — Thallination of Powder Precursor Coatings
  118. Altmetric Badge
    Chapter 117 Pt Buffer Layer for Protecting YBCO from Al at Annealing Temperatures up to 450°C
  119. Altmetric Badge
    Chapter 118 Superconducting Electric Power Applications
  120. Altmetric Badge
    Chapter 119 Development and Demonstration of a High Temperature Superconducting Power Transmission Cable System
  121. Altmetric Badge
    Chapter 120 Coil and HTS Development for Fault Current Limiters
  122. Altmetric Badge
    Chapter 121 Progress in Fabrication of Large Magnetic Shields by Using Extended YBCO Thick Films Sprayed on Stainless Steel with the HVOF Technique
  123. Altmetric Badge
    Chapter 122 Development of Westinghouse HTS Vapor-Cooled Current Leads
  124. Altmetric Badge
    Chapter 123 Development of a Bi-2212 Superconducting Magnet
  125. Altmetric Badge
    Chapter 124 High Temperature Superconducting Racetrack Coils for Electric Motor Applications
  126. Altmetric Badge
    Chapter 125 HTS Coils for High Resolution Nuclear Magnetic Resonance Spectroscopy
  127. Altmetric Badge
    Chapter 126 High Temperature Superconducting Fault Current Limiter for Utility Applications
  128. Altmetric Badge
    Chapter 127 Effect of Bubbling on the Current Carrying Capacity of Small BSCCO Coils
  129. Altmetric Badge
    Chapter 128 Development Status of a 125 Horsepower Superconducting Motor
  130. Altmetric Badge
    Chapter 129 A 100 MVA Generator Utilizing High-Temperature Superconducting Windings: Design Assessment and Component Development
  131. Altmetric Badge
    Chapter 130 Cryo-Electronics: The Promise and the Challenge
  132. Altmetric Badge
    Chapter 131 In-Plane Alignment and Critical Current Density in C-Axis Oriented YBa 2 Cu 3 O 7-y Films Prepared by Sputtering
  133. Altmetric Badge
    Chapter 132 Effect of Inhomogeneous Distribution of Pinning Strength on Current-Voltage Characteristics in High-Temperature Superconductors
  134. Altmetric Badge
    Chapter 133 Power Performance of YBCO Thin Films on Sapphire Substrates at Microwave Frequencies
  135. Altmetric Badge
    Chapter 134 High Temperature Superconducting Filter Technology for Electronic Warfare Systems
  136. Altmetric Badge
    Chapter 135 Transport Properties of Si + Irradiated YBa 2 Cu 3 O y Thin Films
  137. Altmetric Badge
    Chapter 136 Current-Voltage Characteristics of Bi 2 Sr 2 CaCu 2 O 8+δ in the C-Axis Direction
  138. Altmetric Badge
    Chapter 137 Characterization of High Purity Aluminum Material for Use as a Stabilizer of the 60 kA SMES Conductor
  139. Altmetric Badge
    Chapter 138 Effects of Grain Size and Purity on the Low Temperature Cyclic Strain Degradation of Stabilizer Aluminum
  140. Altmetric Badge
    Chapter 139 Magnetosensitive Conductivity of Aluminum and the Advantage of Corbino Geometry
  141. Altmetric Badge
    Chapter 140 Magnetostimulated Inhomogeneity of Electric Field in Aluminum
  142. Altmetric Badge
    Chapter 141 Deformation Electrical Resistivity of Al-Ga Dilute Alloys in Strong Magnetic Fields
  143. Altmetric Badge
    Chapter 142 Galvanomagnetic Properties of Composite Aluminum Hyperconductors
  144. Altmetric Badge
    Chapter 143 Nb-Ti Composite Wires with Artificial Ferromagnetic Pins
  145. Altmetric Badge
    Chapter 144 Flux Pinning Property of Artificially Introduced Nb in Nb-Ti Superconductors
  146. Altmetric Badge
    Chapter 145 Ferromagnetic Artificial Pinning Centers in Multifilamentary Superconducting Wires
  147. Altmetric Badge
    Chapter 146 Effect of Proximity Length on Flux Pinning in APC Composites: An Overview of APC
  148. Altmetric Badge
    Chapter 147 Application of the Supercon APC Process to Nb-Ti-Ta Ternary Conductors
  149. Altmetric Badge
    Chapter 148 Development of Multifilamentary Superconductors Containing Nb-40wt%Ti-18wt%Ta and Nb-41wt%Ti-28wt%Ta Ternary Alloys
  150. Altmetric Badge
    Chapter 149 Multilayer Nb-Ti for Use as Model Superconducting Microstructures
  151. Altmetric Badge
    Chapter 150 Microstructure and Properties of Simultaneously Processed Nb-Ti and Nb-Ti-Ta Superconducting Wires
  152. Altmetric Badge
    Chapter 151 Production of a Large Diameter High-Current Nb-Ti Wire
  153. Altmetric Badge
    Chapter 152 NbTi Billets for Superconductor Production
  154. Altmetric Badge
    Chapter 153 Enhanced Proximity Effect Coupling Due to the Presence of a Nb Barrier in Fine NbTi Multifilamentary Composites
  155. Altmetric Badge
    Chapter 154 Development of New Nb-Ti Wires with a Cu-Si Alloy Matrix for AC Use
  156. Altmetric Badge
    Chapter 155 Measurement of Current Distribution in Superconducting Non-Insulated Stranded Cable
  157. Altmetric Badge
    Chapter 156 Ramp Rate Sensitivity in Accelerator Magnets
  158. Altmetric Badge
    Chapter 157 Experimental Study of AC Losses in a Rutherford Type Cable
  159. Altmetric Badge
    Chapter 158 Studies on Stabilities of Superconducting Rutherford Cables
  160. Altmetric Badge
    Chapter 159 Magnetic Studies of AC Loss in Pressurized Rutherford Cables with Coated Strands and Resistive Cores
  161. Altmetric Badge
    Chapter 160 Time Constants of Flat Superconducting Cables
  162. Altmetric Badge
    Chapter 161 Dependence of Self Field AC Losses in AC Multifilamentary Composites and Cables on External AC Magnetic Field
  163. Altmetric Badge
    Chapter 162 On the Position of the Apparent Current Center Inside CICC during External Magnetic Field Ramp
  164. Altmetric Badge
    Chapter 163 Jumps of the Local Magnetic Field Near CICC during External Magnetic Field Ramp and Their Connection with the Ramp Rate Limitation
  165. Altmetric Badge
    Chapter 164 Experimental Investigation of Stability in Cable — in — Conduit Conductors Subjected to Varying Field Due to Plasma Disruption
  166. Altmetric Badge
    Chapter 165 Power Loss in SSC Dipole Magnets during a Current Ramp
  167. Altmetric Badge
    Chapter 166 Coupling Loss Time Constants in Full-Size Nb 3 Sn CIC Model Conductors for Fusion Magnets
  168. Altmetric Badge
    Chapter 167 Current Redistribution in an SSC Strand during a Quench
  169. Altmetric Badge
    Chapter 168 Contact Surfaces between Strands of Rutherford Cables in Various Curing Conditions
  170. Altmetric Badge
    Chapter 169 Calorimetric Measurements of the Effect of Nickel and Stabrite Coatings and Resistive Cores on AC Loss in Accelerator Cables under Fixed Pressure
  171. Altmetric Badge
    Chapter 170 Energy Losses in Multifilamentary Composite Wires in 50 Hz Magnetic Fields
  172. Altmetric Badge
    Chapter 171 Properties of Internal-Tin Nb 3 Sn Strand for the International Thermonuclear Experimental Reactor
  173. Altmetric Badge
    Chapter 172 (Nb,Ti) 3 Sn/CU Multifilamentary Superconducting Wire with Nb/Ti and Nb/NbTi Composite Filaments
  174. Altmetric Badge
    Chapter 173 The Investigation of the Effect of Niobium Artificial Doping with Titanium on Nb 3 Sn Superconductors Properties
  175. Altmetric Badge
    Chapter 174 Effects of Tantalum Addition on Hysteresis Losses and Critical Current Densities of Powder-Metallurgy Processed Nb 3 Sn Superconducting Wires
  176. Altmetric Badge
    Chapter 175 Bench Mark Testing of Nb 3 Sn Strands for the ITER Model Coil
  177. Altmetric Badge
    Chapter 176 High-Field Nb 3 Sn Superconductors Prepared through a New Route
  178. Altmetric Badge
    Chapter 177 Development of Superconducting Wires for Fusion Application
  179. Altmetric Badge
    Chapter 178 Quantity and Quality of the Nb 3 Sn Intermetallics Formed by the Internal Tin Process
  180. Altmetric Badge
    Chapter 179 Improvement of Critical Current Density of Bronze Processed Nb 3 Sn Superconducting Wire
  181. Altmetric Badge
    Chapter 180 Superconducting Properties of V 3 Si Multifilamentary Conductor
  182. Altmetric Badge
    Chapter 181 Further Studies of Nb 3 Sn Wire for the 45-T Hybrid Magnet
  183. Altmetric Badge
    Chapter 182 High Compressive Axial Strain Effect on the Critical Current and Field of Nb 3 Sn Superconductor Wire
  184. Altmetric Badge
    Chapter 183 Tantalum-Niobium Alloy Diffusion Barriers for Superconducting Nb 3 Sn Wires in Fusion Applications
  185. Altmetric Badge
    Chapter 184 Tensile Strain / Transverse Compressive Stress Effects in Nb 3 Sn Multifilamentary Wires with CuNb Reinforcing Stabilizer
  186. Altmetric Badge
    Chapter 185 Nb 3 Sn Multifilamentary Wires and Tapes for High-Field Magnetic Systems
  187. Altmetric Badge
    Chapter 186 Critical Current Densities of Jelly-Roll and Powder Metallurgy Nb 3 Al Wires as a Function of Temperature and Magnetic Field
  188. Altmetric Badge
    Chapter 187 Superconducting Properties of Nb 3 Al Multifilamentary Wires Fabricated Continuously by Rapid-Quenching
  189. Altmetric Badge
    Chapter 188 Strain Studies on Superconducting Nb 3 Sn Tape Using Differential Thermal Contraction and Other Methods
  190. Altmetric Badge
    Chapter 189 Investigation of Microscopic Strain by X-Ray Diffraction in Nb 3 Sn Tape Conductors Subjected to Compressive and Tensile Strains
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
2 patents

Readers on

mendeley
12 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Cryogenic Engineering Materials
Published by
Springer US, December 2013
DOI 10.1007/978-1-4757-9059-7
ISBNs
978-1-4757-9061-0, 978-1-4757-9059-7
Editors

Summers, Leonard T.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Colombia 1 8%
Germany 1 8%
Unknown 10 83%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 4 33%
Student > Master 2 17%
Student > Bachelor 1 8%
Other 1 8%
Researcher 1 8%
Other 1 8%
Unknown 2 17%
Readers by discipline Count As %
Materials Science 3 25%
Engineering 2 17%
Physics and Astronomy 1 8%
Biochemistry, Genetics and Molecular Biology 1 8%
Chemistry 1 8%
Other 1 8%
Unknown 3 25%