↓ Skip to main content

ICAA13 Pittsburgh

Overview of attention for book
Cover of 'ICAA13 Pittsburgh'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Aberration-Corrected STEM Study of Precipitates in an Al-Mg-Si-Ge-Cu Alloy
  3. Altmetric Badge
    Chapter 2 Diffraction-Amalgamated Grain-boundary Tracking (DAGT) technique and its application to an aluminum alloy
  4. Altmetric Badge
    Chapter 3 Effect of Composition and Pre-Ageing on the Natural Ageing and Paint-Baking Behaviour of Al-Mg-Si Alloys
  5. Altmetric Badge
    Chapter 4 Improvement in the Characterization of the 2099 Al-Li Alloy by FE-SEM
  6. Altmetric Badge
    Chapter 6 Nano-Scale Characterization of Al-Mg Nanocrystalline Alloys
  7. Altmetric Badge
    Chapter 7 Muon Spin Relaxation and Positron Annihilation Spectroscopy Studies of Natural Aging in Al-Mg-Si Alloys
  8. Altmetric Badge
    Chapter 8 Monitoring Precipitation during Rapid Quenching of Aluminium Alloys by Calorimetric Reheating Experiments
  9. Altmetric Badge
    Chapter 9 Hydrogen Depth-Profiling and Desorption Kinetics in Rapidly Solidified Al-Fe Alloys
  10. Altmetric Badge
    Chapter 10 Three-Dimensional Analysis of Microstructure in Cast Aluminium Piston Alloys
  11. Altmetric Badge
    Chapter 11 Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation
  12. Altmetric Badge
    Chapter 13 Study on Electromagnet-Air Knife DC Casting Process of Large-Size AA 7055 Aluminum Alloys
  13. Altmetric Badge
    Chapter 14 Development of Large-size Ultrasonic Sonotrodes for Cavitation Treatment of Molten Metals
  14. Altmetric Badge
    Chapter 15 Microstructural Evolution in Intensively Melt Sheared Direct Chill Cast Al-Alloys
  15. Altmetric Badge
    Chapter 16 The grain refinement of 7050 alloy using al-5ti-1b and al-3ti-0.15c grain refiners
  16. Altmetric Badge
    Chapter 17 Grain refining potency of LaB 6 on aluminum alloy
  17. Altmetric Badge
    Chapter 19 Assestment of the Al-Ni-Mn-Fe-Si-Zr Phase Diagram for New Generation Heat Resistant Casting Aluminum Alloys
  18. Altmetric Badge
    Chapter 20 The Influence of Heat Treatment Parameters on the Electrical Conductivity of AlSi7Mg and AlSi10Mg Aluminum Cast Alloys
  19. Altmetric Badge
    Chapter 21 The Effect of Nickel on the Thermal Conductivity of Al-Si Cast Alloys
  20. Altmetric Badge
    Chapter 22 Production of Single Cylinder Engine Piston through Vacuum Die Casting in Sedi Enugu.
  21. Altmetric Badge
    Chapter 23 Fatigue behavior in rheocast aluminum 357 suspension arms using the SEED process
  22. Altmetric Badge
    Chapter 24 Single Roll Caster to Cast Aluminum Alloy Strip
  23. Altmetric Badge
    Chapter 25 Roll Caster to Cast Clad Strips
  24. Altmetric Badge
    Chapter 26 Tests of Heat Treatment Conditions of AlZr0.22 Alloy, Produced using the Continuous Casting Method
  25. Altmetric Badge
    Chapter 27 Investigation on the evolution of the microstructure during homogenization in thin Al sheets
  26. Altmetric Badge
    Chapter 28 Investigation of Acoustic Streaming in Aluminum Melts Exposed to High-Intensity Ultrasonic Irradiation
  27. Altmetric Badge
    Chapter 29 Fabrication of Aluminum Alloy-Based Diamond Grinding Wheel by the Centrifugal Mixed-Powder Method For Novel Machining Technology of CFRP
  28. Altmetric Badge
    Chapter 30 Preparation of Al-Sc Master Alloy by Aluminothermic Reaction with Special Molten Salt
  29. Altmetric Badge
    Chapter 31 In situ Synthesis of Al/TiC Composites by Combustion Reaction in an Aluminium Melt
  30. Altmetric Badge
    Chapter 33 Aging Behavior of Flexcast® Al-Mg Alloys with Sc and Zr Additions
  31. Altmetric Badge
    Chapter 34 Electromagnetic Continuous Casting of Free-Shaped Aluminum Billet
  32. Altmetric Badge
    Chapter 35 Effect of Mn on the Interaction between Die Casting Steel and Al Alloy
  33. Altmetric Badge
    Chapter 36 Limitation of Shrinkage Porosity in Aluminum Rotor Die Casting
  34. Altmetric Badge
    Chapter 37 The Effect of Alloying Elements on Thermal Conductivity and Casting Characteristic in High Pressure Die Casting of Aluminum Alloy
  35. Altmetric Badge
    Chapter 38 Initial Studies of 6082 Aluminium Thin Films
  36. Altmetric Badge
    Chapter 39 Finite Element Simulation of Shot Peening: Prediction of Residual Stresses and Surface Roughness
  37. Altmetric Badge
    Chapter 40 The Potential of the Cold Spray Process for the Repair and Manufacture of Aluminium Alloy Parts
  38. Altmetric Badge
    Chapter 41 Utilisation of Atom Probe Data to Model Precipitation and Strengthening in an Al-Mg-Si-Cu Alloy During Natural Ageing and Early-Stage Artificial Ageing
  39. Altmetric Badge
    Chapter 42 Ab initio simulations of vacancy-solute clusters in Al-Mg-Si and Al-Zn-Mg alloys
  40. Altmetric Badge
    Chapter 43 The Role of the Si Network to the Stabilization of Hardening Precipitates in the Al-Mg-Si(-Cu) Alloy System
  41. Altmetric Badge
    Chapter 44 Residual Stress Analysis in AA7449 As-Quenched Thick Plates Using Neutrons and Fe Modelling
  42. Altmetric Badge
    Chapter 45 A Through Process Model for Extruded AA3xxx Aluminum Alloys
  43. Altmetric Badge
    Chapter 46 Modeling the Recrystallization Textures in Particle Containing Al Alloys after Various Rolling Reductions
  44. Altmetric Badge
    Chapter 47 TCAL1 and MOBAL2 — The Development and Validation of New Thermodynamic and Mobility Databases for Aluminium Alloys
  45. Altmetric Badge
    Chapter 48 Advances in Integrated Computational Materials Engineering “ICME”
  46. Altmetric Badge
    Chapter 49 Numerical Simulation of Flat Rolling Practices
  47. Altmetric Badge
    Chapter 50 Modelling the Effect of Room Temperature Storage and Deformation on the Age-hardening Behaviour of Al-Mg-Si alloys
  48. Altmetric Badge
    Chapter 51 Evaluation Of The Quenching Sensitivity Of Al-Zn-Mg-Cu-Zr Aluminum Alloys By Mole Fraction Of Equilibrium Phases
  49. Altmetric Badge
    Chapter 52 Modelling Grain Deformation during Extrusion of AA3003 using the Finite Element Method
  50. Altmetric Badge
    Chapter 53 Experience of Developing and Introduction in Industry New Primary and Secondary Al-Alloys with Given Properties for Shape Casting
  51. Altmetric Badge
    Chapter 54 Application of Microelectrochemical Methods for Understanding Localized Corrosion Behavior of Aluminum Alloys
  52. Altmetric Badge
    Chapter 55 Precipitation of the β-phase and Corrosion Behavior of an Al-6.8 wt.% Mg Alloy
  53. Altmetric Badge
    Chapter 56 Testing the Corrosion Behaviour of Plated Aluminum Strips for Heat Exchangers Operating in the Automotive Industry
  54. Altmetric Badge
    Chapter 57 Corrosion Protection of Light Alloys using Low Pressure Cold Spray
  55. Altmetric Badge
    Chapter 58 Crystallographic Orientation Dependence of Corrosion Behabior of 5N Purity Aluminum in Different Concentrations of HCl Aqueous Solutions
  56. Altmetric Badge
    Chapter 59 Corrosion Fatigue Mechanism on Hot-Forged AA6082 Aluminum Alloy
  57. Altmetric Badge
    Chapter 60 Corrosion Inhibition of Stress Corrosion Cracking and Localized Corrosion of Turbo-Expander Materials
  58. Altmetric Badge
    Chapter 61 Corrosion Characteristics of an Al-1.78%Si-13.29%Mg Alloy in Chloride Solutions
  59. Altmetric Badge
    Chapter 62 Corrosion Performance of New Generation Aluminum-Lithium Alloys for Aerospace Applications
  60. Altmetric Badge
    Chapter 63 Comparison of corrosion performance and mechanisms of Al-Cu alloys with and without Li addition
  61. Altmetric Badge
    Chapter 65 Corrosion and Potentiostatic Polarization of an Al-Cu-Li Alloy under Tensile Stress
  62. Altmetric Badge
    Chapter 66 The Effect of Chemical Composition and Structure on the Corrosion Resistance of Plated Aluminium Alloy Strips
  63. Altmetric Badge
    Chapter 67 Effect of Fatigue and Damage Tolerance Material Properties on the Efficiency of Aircraft Structures
  64. Altmetric Badge
    Chapter 68 About the Challenge in Determining the Cyclic Material Behavior of Aluminum Alloys for Numerical Fatigue Analyses
  65. Altmetric Badge
    Chapter 69 A Microstructure Based Multi-Site Crack Growth Model
  66. Altmetric Badge
    Chapter 70 Short Fatigue Crack Growth Micromechanisms in a Cast Aluminium Piston Alloy
  67. Altmetric Badge
    Chapter 71 Fatigue Life of Ablation Cast 6061-T6 Components
  68. Altmetric Badge
    Chapter 72 Mechanical Properties of Heat Exchanger Tube Materials at Elevated Temperatures
  69. Altmetric Badge
    Chapter 73 Fatigue Behavior and Damage Monitoring of Ultrasonic Welded Hybrid Joints
  70. Altmetric Badge
    Chapter 74 Fatigue Resistance of Al-Cu-Li and Comparison with 7xxx Aerospace Alloys
  71. Altmetric Badge
    Chapter 75 Fatigue Crack Growth Behavior of 2099-T83 Extrusions in two Different Environments
  72. Altmetric Badge
    Chapter 76 Influence of microstructure on the fretting resistance of Al-Cu-Li alloys
  73. Altmetric Badge
    Chapter 77 Al-Li-Cu-Mg-(Ag) Products for Lower Wing Skin Applications
  74. Altmetric Badge
    Chapter 78 Development of High Toughness Sheet and Extruded Products for Airplane Fuselage Structures
  75. Altmetric Badge
    Chapter 79 Expanding the Availability of Lightweight Aluminum Alloy Armor Plate Procured from Detailed Military Specifications
  76. Altmetric Badge
    Chapter 80 Threshold stress of A3003 alloy
  77. Altmetric Badge
    Chapter 81 Ultrasonic fatigue of SiC particle reinforced aluminum in the VHCF-regime
  78. Altmetric Badge
    Chapter 82 Influence of Strain Hardening on Rheological Properties of AlMgSi Wires
  79. Altmetric Badge
    Chapter 83 Origin of Ductile Fracture in Aluminum Alloys
  80. Altmetric Badge
    Chapter 84 Damage Tolerance Applied to Design of Mid-Size Aircraft
  81. Altmetric Badge
    Chapter 85 The Metallurgy of High Fracture Toughness Aluminum-Based Plate Products for Aircraft Internal Structure
  82. Altmetric Badge
    Chapter 86 The Evolution of Plate and Extruded Products with High Strength and Fracture Toughness
  83. Altmetric Badge
    Chapter 87 Lighter and Stiffer Materials for Use in Space Vehicles
  84. Altmetric Badge
    Chapter 88 Research on the High-cycle Fatigue and Crack Initiation Behavior of AA7449 Alloy
  85. Altmetric Badge
    Chapter 89 Vehicle Lightweighting: Challenges and Opportunities with Aluminum
  86. Altmetric Badge
    Chapter 90 Correlation of Fracture Behavior with Microstructure in Friction Stir Welded, and Spin-Formed Al-Li 2195 Domes
  87. Altmetric Badge
    Chapter 91 Effect of Process Parameters on Microstructure Stability of FSW Butt Joints after Thermal Treatments
  88. Altmetric Badge
    Chapter 93 Microstructure and mechanical properties of dissimilar friction stir welds using AA6061-T6 and AZ31 plates
  89. Altmetric Badge
    Chapter 94 Microstructure and Mechanical Properties of Friction Stir Welded Aluminum Alloy/Stainless Steel Lap Joints
  90. Altmetric Badge
    Chapter 96 Hardening Potential of an Al-Cu-Li Friction Stir Weld
  91. Altmetric Badge
    Chapter 97 Material Testing and Modeling of Aluminum Alloy Sheet in Support of Forming Simulations
  92. Altmetric Badge
    Chapter 98 Evaluation of the Ring Compression Test for the Parameter Determination of Extended Friction Models
  93. Altmetric Badge
    Chapter 100 The Influence of Alloy Composition on the Microstructure, Tensile Ductility and Formability of 6xxx Alloys
  94. Altmetric Badge
    Chapter 101 Accelerated Post-Weld Natural Ageing in Ultrasonic Welding Aluminium 6111-T4 Automotive Sheet
  95. Altmetric Badge
    Chapter 102 Limitations of the M-K Based Forming Limit Diagrams
  96. Altmetric Badge
    Chapter 103 Influence of Forming Conditions on Springback in V-bending Process Using Servo Press
  97. Altmetric Badge
    Chapter 104 Anisotropy and Forming Limit Diagram Comparison of DC and CC 5xxx O Temper Aluminum Alloy Sheets
  98. Altmetric Badge
    Chapter 105 Comparison of Localized Deformation in Crystal Plasticity Based Finite Element Simulations between Experimentally Measured and Statistically Generated Three-Dimensional Microstructures for the Aluminum Alloy 5754
  99. Altmetric Badge
    Chapter 106 Path Independent Polar Effective Plastic Strain (PEPS) Diagram for Sheet Forming
  100. Altmetric Badge
    Chapter 107 Effect of Impact Compression on the Age-Hardening of Rapidly Solidified Al-Zn-Mg Base Alloys
  101. Altmetric Badge
    Chapter 108 Fatigue and Creep Properties of Al-Si Brazing Filler Metals
  102. Altmetric Badge
    Chapter 109 Effect of Additional Elements of Al-Si Filler Alloy on Flowability and Clearance Fillability
  103. Altmetric Badge
    Chapter 110 Influence of Erosion Phenomenon on Flow Behavior of Liquid Al-Si Filler Between Brazed Components
  104. Altmetric Badge
    Chapter 111 Effects of Plate Thickness and Projection Shape on the Microstructure and Strength of High-Speed Solid-State Joined 2024 Alloy Studs and 5052 Alloy Plates
  105. Altmetric Badge
    Chapter 112 Interfacial Reaction During Dissimilar Joining of Aluminum Alloy to Magnesium and Titanium Alloys
  106. Altmetric Badge
    Chapter 113 Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method
  107. Altmetric Badge
    Chapter 114 Interface Structure and Bonding in Rapid Dissimilar FSSW of Al to Steel Automotive Sheet
  108. Altmetric Badge
    Chapter 115 Effect of Additional Element on Hybrid Laser Weldability in Al-Mn Alloys
  109. Altmetric Badge
    Chapter 116 Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Similar- and Dissimilar-Metal Plates
  110. Altmetric Badge
    Chapter 117 Influences on ARC Stability in Welding of Aluminum Pin-Structures
  111. Altmetric Badge
    Chapter 118 Multiscale characterization and mechanical modeling of an Al-Zn-Mg electron beam weld
  112. Altmetric Badge
    Chapter 119 High Temperature Deformation Behavior of a 6N01 Aluminum Alloy Extrusion with a Seam Weld
  113. Altmetric Badge
    Chapter 120 Simulation of Local Material Properties during Laser Beam Welding of Aluminum-Titanium Compounds
  114. Altmetric Badge
    Chapter 121 Changes in Microstructure during High Strain Rate Superplastic Deformation of an Al-Zn-Mg-Cu-Zr Alloy Containing Sc
  115. Altmetric Badge
    Chapter 123 Microstructure Evolution and Tensile Property of Al-4.35Cu-1.53Mg Alloy during Creep Age Forming Process
  116. Altmetric Badge
    Chapter 124 New Analysis of Solute Drag in AA5754 by Precise Determination of Point Defect Generation and the Orowan Relation
  117. Altmetric Badge
    Chapter 125 The Influence of Microstructure and Composition on the Machinability of Al-Si Alloys
  118. Altmetric Badge
    Chapter 127 A New Crystal Plasticity Based Constitutive Model Incorporating Backstress for FCC Polycrystals
  119. Altmetric Badge
    Chapter 128 Numerical Analysis of Surface Roughening and Necking in Aluminum Alloy Tubes Under Internal Pressure
  120. Altmetric Badge
    Chapter 129 Polycrystal-Plasticity Simulation of Roping in AA 6xxx Automotive Sheet Alloys
  121. Altmetric Badge
    Chapter 130 Properties of Free-Machining Aluminum Alloys at Elevated Temperatures
  122. Altmetric Badge
    Chapter 131 Mechanical Properties of Al-Mg-Sc-Zr Alloys at Cryogenic and Ambient Temperatures
  123. Altmetric Badge
    Chapter 132 Manufacturing Challenges for Aluminum Sheet in the Automotive Industry
  124. Altmetric Badge
    Chapter 134 Buckling of Aluminium Sheet Components
  125. Altmetric Badge
    Chapter 135 Predicting Hot Deformation of AA5182 Sheet
  126. Altmetric Badge
    Chapter 136 Examination of Buckling Behavior of Thin-Walled Al-Mg-Si Alloy Extrusions
  127. Altmetric Badge
    Chapter 137 Crystal Plasticity Calculations of Mechanical Anisotropy of Aluminium Compared to Experiments and to Yield Criterion Fittings
  128. Altmetric Badge
    Chapter 138 Microstructure and mechanical properties of an electron beam welds in a spray-deposited Al-Zn-Mg-Cu alloy
  129. Altmetric Badge
    Chapter 139 Characterization of Damage Mechanisms During Bending of 6xxx Aluminum Automotive Sheets
  130. Altmetric Badge
    Chapter 140 Heat treatment of welded joints made on 7020 alloy with the AlMg5 alloy
  131. Altmetric Badge
    Chapter 141 Development of Age-Hardening Technology for Ultrafine-Grained Al-Li-Cu Alloys Fabricated by High-Pressure Torsion
  132. Altmetric Badge
    Chapter 142 Tailored Welding Technique for High Strength Al-Cu Alloy for Higher Mechanical Properties
  133. Altmetric Badge
    Chapter 143 Distinguishing Dynamic Recrystallization (DRX) in Aluminum and Single-Phase Alloys
  134. Altmetric Badge
    Chapter 144 Strain Hardening, Strain Softening and the Portevin-Le Chatelier Effect in Cryomilled, Ultrafine Grained AA 5083
  135. Altmetric Badge
    Chapter 146 Magnetic, Structural and Mechanical Behavior of Transitional Bulk Nanostructured Al Alloy
  136. Altmetric Badge
    Chapter 147 Production of Al-Based Nano-Intermetallics by High-Pressure Torsion
  137. Altmetric Badge
    Chapter 148 Novel Cold Spray Nanostructured Aluminum
  138. Altmetric Badge
    Chapter 149 Self-propagating foaming process of Al-Ti reactive precursor for fabricating long scale porous materials
  139. Altmetric Badge
    Chapter 150 ALUHAB — The Superior Aluminium Foam
  140. Altmetric Badge
    Chapter 152 Powder metallurgy of high-strength Al 90.4 Y 4.4 Ni 4.3 Co 0.9 gas-atomized powder
  141. Altmetric Badge
    Chapter 153 Advanced Class of FML on the Base Al-Li Alloy 1441 with Lower Density
  142. Altmetric Badge
    Chapter 154 Solute Distribution and Mechanical Properties of Ultra-Fine-Grained Al-Mg Alloys
  143. Altmetric Badge
    Chapter 155 Age-hardening Behavior of MgB 2 Particle Dispersed Al Alloy Composite Materials
  144. Altmetric Badge
    Chapter 156 Production of the Al 3 Ti foam by microwave heating
  145. Altmetric Badge
    Chapter 157 Nanocluster Formation Behavior in Al-Zn-Mg Alloys with Microalloying Elements and Improved Mechanical Properties
  146. Altmetric Badge
    Chapter 158 Effects of Microalloying Elements (Cu, Ag) on Nanocluster Formation and Age-Hardening Behavior in Al-Mg-Si Alloys
  147. Altmetric Badge
    Chapter 159 Effect of Low Cu Amounts and Pre-Deformation on the Precipitation in Al-Mg-Si Alloys
  148. Altmetric Badge
    Chapter 160 High Resolution Characterization of the Precipitation Behavior of an Al-Zn-Mg-Cu alloy
  149. Altmetric Badge
    Chapter 161 Precipitation Process in a High Mg to Cu Ratio Al-Mg-Cu-Ge Alloy
  150. Altmetric Badge
    Chapter 162 Investigations on the Precipitation in Monocrystalline Al-Mg-Si Model Alloy by Small Angle Neutron Scattering
  151. Altmetric Badge
    Chapter 163 Prediction of the Influence of Si Content on the Ageing Behavior of Al-Mg-Si-Cu Alloys by Thermodynamic Modeling
  152. Altmetric Badge
    Chapter 164 Continuous Heating Dissolution Diagrams of Aluminum Alloys
  153. Altmetric Badge
    Chapter 165 Dynamic room temperature precipitation during cyclic deformation of an Al-Zn-Mg-Cu alloy
  154. Altmetric Badge
    Chapter 166 Effects of Pre-Aging Condition on Multi-Step Aging Behavior in Al-Mg-Si Alloys
  155. Altmetric Badge
    Chapter 167 Hardening Response to Rapid Aging Processes and Precipitation in Al-7%Si-0.3%Mg Alloy
  156. Altmetric Badge
    Chapter 168 Thermodynamics of Al 3 Li nano-clusters in an Aluminum solid solution
  157. Altmetric Badge
    Chapter 169 The Effect of Cu and Cr on Clustering and Precipitation in Al-Mg-Si Alloys
  158. Altmetric Badge
    Chapter 170 Influence of Mg and Si on Cluster Formation in Al-Mg-Si Alloys Studied by Positron Annihilation Lifetime Spectroscopy
  159. Altmetric Badge
    Chapter 171 Microstructural Characterization of Flexcast® Al-Mg Alloys with Scandium and Zirconium Additions
  160. Altmetric Badge
    Chapter 172 Precipitation in Al-Cu-Li alloys: from the kinetics of T 1 phase precipitation to microstructure development in friction stir welds
  161. Altmetric Badge
    Chapter 173 Quantitative description of the T 1 morphology and strengthening mechanisms in an age-hardenable Al-Li-Cu alloy
  162. Altmetric Badge
    Chapter 174 Orientation Relationship of Dispersoids Precipitated in an AA3XXX Alloy during Annealing at Low Temperatures
  163. Altmetric Badge
    Chapter 175 Hf-Containing Precipitates in Al-Si-Mg-Hf Alloy during Heat Treatments at 400°C-560°C
  164. Altmetric Badge
    Chapter 176 Ageing Hardning and Precipitationg of the 7A60 Alloy during Cooling Aging
  165. Altmetric Badge
    Chapter 177 Precipitation Morphology in Al-Mg-Si-Sc-Zr Hot-Rolled Sheet
  166. Altmetric Badge
    Chapter 178 The Effect of Natural Ageing on Quench Sensitivity in Al-Mg-Si Alloys
  167. Altmetric Badge
    Chapter 180 Influence of chemical composition on aging property of 7204 aluminum alloy
  168. Altmetric Badge
    Chapter 181 Transforming of the Morphology of Iron Phases in Aluminum Alloys
  169. Altmetric Badge
    Chapter 182 Effects of microalloying with Sn on the precipitation process of Al-3.5Cu-0.4Mg (wt%) alloy
  170. Altmetric Badge
    Chapter 183 Effect of Fe Content on the Transformation of Ferrous Phases in 6XXX Alloys during Homogenizing Annealing
  171. Altmetric Badge
    Chapter 185 Precipitation morphology and tensile properties of Al-0.62Mg-0.32Si alloy aged at low temperature
  172. Altmetric Badge
    Chapter 186 Microstructural Change and Mechanical Properties with Isochronal Aging in Al-Ni-Gd Metallic Glasses
  173. Altmetric Badge
    Chapter 187 Age-Hardening Behavior of Al-Mg 2 Si Alloys with Different Mn and Fe Contents
  174. Altmetric Badge
    Chapter 188 The Features of Phase Composition and Microstructure of Eutectic Piston Alloys AlSi12CuMgNi and AlSi12Cu2MgNi
  175. Altmetric Badge
    Chapter 189 Tem Observation of Precipitates in Ag-Added Al-Mg-Si Alloys
  176. Altmetric Badge
    Chapter 191 Effect of Cu or Ag Addition on Tensile Deformation in Al-Zn-Mg Alloys
  177. Altmetric Badge
    Chapter 192 Hrtem Observation of the Precipitates in Cu and Ag Added Al-Mg-Si Alloys
  178. Altmetric Badge
    Chapter 193 Effect of Cu or Ag Addition on Two-Step Aging Al-Mg-Si Alloy
  179. Altmetric Badge
    Chapter 194 Effect of Cold Rolling on Age Hardening in Excess Mg-Type Al-Mg-Si Alloys Including Some Minor Elements
  180. Altmetric Badge
    Chapter 195 Effect of Transition Metals on the Age-Hardening Behavior of Al-Mg-Ge Alloys
  181. Altmetric Badge
    Chapter 196 Tem Observation of Precipitates in Al-Mg-Ge Alloys with Different Mg 2 Ge Contents
  182. Altmetric Badge
    Chapter 197 Effect of Quenching Condition on Aging of Dilute Al-Ag Alloy
  183. Altmetric Badge
    Chapter 198 Influence of Silicon Addition on Precipitation Behavior in an Al-Cu-Mg Alloy
  184. Altmetric Badge
    Chapter 200 Exploring Property Based Aluminum Specifications
  185. Altmetric Badge
    Chapter 201 Emerging Development in Al-Alloy Recycling for Nontraditional Aluminum Metal Matrix Composites Processing
  186. Altmetric Badge
    Chapter 202 Reuse of Aluminum Dross as an Engineered Product
  187. Altmetric Badge
    Chapter 203 Separation of Inclusion Particles from Liquid Metal by Electromagnetic Force
  188. Altmetric Badge
    Chapter 204 The Influence of Pyrolythic Reactions on the Aluminum Dross Formation during the Twin Chamber Remelting Process
  189. Altmetric Badge
    Chapter 205 Turbulent Coagulation of Solid Particles in Molten Aluminium—Kinetics of Cluster Formation
  190. Altmetric Badge
    Chapter 206 Purification using high pressure molten aluminum
  191. Altmetric Badge
    Chapter 207 Recycling of Aluminum Alloy with Dimox and Rheocasting Functionalize High Performance Structural Foam Composite
  192. Altmetric Badge
    Chapter 209 Aluminum Monolithic Alloy and Multi-Alloy Cast Using Planar Solidification Approach
  193. Altmetric Badge
    Chapter 210 The Effect of Planar Solidification on Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloy Plate
  194. Altmetric Badge
    Chapter 211 Functional Gradient Products Enabled by Planar Solidification Technologies
  195. Altmetric Badge
    Chapter 212 Role of Solute and Transition Metals in Grain Refinement of Aluminum Alloys under Ultrasonic Melt Treatment
  196. Altmetric Badge
    Chapter 213 Melt Conditioned Casting of Aluminum Alloys
  197. Altmetric Badge
    Chapter 214 Impact Toughness Enhancement of Melt Treated Al-Si-Mg Cast Alloy
  198. Altmetric Badge
    Chapter 215 Intermetallic Phase Formation in TP-1 and DC Cast Billet of an AA6063 Al Alloy
  199. Altmetric Badge
    Chapter 216 The Interdependence Model: An Improved Predictor of Grain Size
  200. Altmetric Badge
    Chapter 217 Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent
  201. Altmetric Badge
    Chapter 218 Microstructure Development and Control in Hypereutectic Cast Al-Si Alloys Evaluated by Metallurgical Analysis and Neutron Diffraction
  202. Altmetric Badge
    Chapter 219 Semi-Solid Forming of A356 Alloy by Rapid Slurry Forming Process
  203. Altmetric Badge
    Chapter 220 Influence of the Fe Content, Mn/Fe Ratio and Cooling Rate on the Modification Process of Fe Intermetallic Compounds in Hypoeutectic Al-Si Alloys
  204. Altmetric Badge
    Chapter 221 Effect of Oxide Level on Pore Formation in A356 Alloy by X-Ray Imaging and Directional Solidification Technology
  205. Altmetric Badge
    Chapter 222 Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster
  206. Altmetric Badge
    Chapter 223 Rapid Solidification of a New Generation Aluminum-Lithium Alloy via Electrospark Deposition
  207. Altmetric Badge
    Chapter 224 The Influence of Cu on Eutectic Nucleation and Morphology in Hypoeutectic Al-Si Alloys
  208. Altmetric Badge
    Chapter 225 Primary Cooling Heat Transfer during the Direct-Chill Casting of Aluminum Alloy AA6111
  209. Altmetric Badge
    Chapter 227 Characterization of Metal Flow in Metals Processing by a Combined Approach using Advanced Experimental Grid Pattern Techniques Coupled with FE-analysis
  210. Altmetric Badge
    Chapter 229 Effect of Alloy Elements on Microstructures and Mechanical Properties in Al-Mg-Si Alloys
  211. Altmetric Badge
    Chapter 230 Dispersion Hardening Effect of Dispersoids in 3xxx Al Alloys With Varying Manganese and Silicon Contents
  212. Altmetric Badge
    Chapter 232 Effect of Iron and Silicon on Strength and Electrical Resistivity of Al-Zr Wire Alloys
  213. Altmetric Badge
    Chapter 233 Influence of the Chemical Composition on the Structure and Properties of Lead-Free Machinable AA6023 (Al-Mg-Si-Sn-Bi) Alloy
  214. Altmetric Badge
    Chapter 234 Homogenization of 6xxx Alloy Ingots with an Addition of Vanadium
  215. Altmetric Badge
    Chapter 235 Hot Extrusion of Aluminum Chips
  216. Altmetric Badge
    Chapter 236 3-Dimensional Microstructure of Al-Al 3 Ti Alloy Severely Deformed by ECAP
  217. Altmetric Badge
    Chapter 237 Abnormal Recrystallization Behavior of High Purity Aluminum Foil
  218. Altmetric Badge
    Chapter 239 Effect of Quenching Wait Time on Microstructure and Mechanical Properties of As-Extruded AA6063 Alloy
  219. Altmetric Badge
    Chapter 240 Hot Deformation Behavior and Microstructural Evolution of Homogenized 7150 Aluminum Alloys Micro-Alloyed with Zr and V
  220. Altmetric Badge
    Chapter 242 Structual Evolution in Aluminium Alloy AA6082 during HPT Deformation at Increased Temperature
  221. Altmetric Badge
    Chapter 243 Advances in Aluminum Mold Block for Plastic Injection Molding Operations
  222. Altmetric Badge
    Chapter 244 Metalworking of a Spherical Particle Reinforced Aluminum Composite
  223. Altmetric Badge
    Chapter 246 Super High Strength Aluminum Alloy Processed by Mechanical Alloying and Hot Extrusion
  224. Altmetric Badge
    Chapter 247 A system for Continuous Extrusion Using High Pressure Molten Metal
  225. Altmetric Badge
    Chapter 248 Visualization of Material Flow in Friction Extrusion
  226. Altmetric Badge
    Chapter 250 Process analysis of the co-extrusion of aluminum and titanium alloys
  227. Altmetric Badge
    Chapter 251 Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy
  228. Altmetric Badge
    Chapter 252 Simultaneous Improvement of Strength and Ductility in Al-Ag Alloys Processed by High-Pressure Torsion and Aging
  229. Altmetric Badge
    Chapter 253 Microstructural and mechanical evolutions during the forging step of the COBAPRESS, a casting/forging process
  230. Altmetric Badge
    Chapter 255 The Effect of Heat Treatment Technology on Mechanical Properties of Al/Al Alloys Multilayer Sheet Fabricated by Hot Roll Bonding
  231. Altmetric Badge
    Chapter 256 Orientation Dependent Subgrain Growth During Isothermal Annealing of High-Purity Aluminum
  232. Altmetric Badge
    Chapter 257 Effect of Nickel Variation and Thermomechanical Treatment on Microstructure and Properties in Aluminum Alloy Fin Stock for Heat Exchanger
  233. Altmetric Badge
    Chapter 258 A study of the influence of plastic pre strain in different directions before ageing of extruded and hydro formed material on the mechanical properties of AA6063
  234. Altmetric Badge
    Chapter 259 Characterization of the Artificial Aging Behavior and Formability of a High Strength EN AW-6016 at Different Heat Treatment Conditions Used for Automotive Applications
  235. Altmetric Badge
    Chapter 260 Low Work Hardening and Its Mitigation in Ultra-Fine Grained Aluminum Alloys
  236. Altmetric Badge
    Chapter 261 The Influence of Initial Microstructure on the Recrystallization Behaviour of Cold-Rolled AA3003
  237. Altmetric Badge
    Chapter 262 Mechanical Properties of Multilayer 1100/7075 Aluminum Sheet Produced by Hot ARB
  238. Altmetric Badge
    Chapter 263 Examining the Mechanisms of Dynamic Recrystallization (DRX) in Two-Phase Al Alloys
  239. Altmetric Badge
    Chapter 264 Mechanical Characterization of Bimodal Grain Size Aluminum 5083 Under Various Test Conditions
  240. Altmetric Badge
    Chapter 265 Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr Alloy Subjected to Extensive Cold Rolling
  241. Altmetric Badge
    Chapter 267 Modeling of Work-Hardening in an Age-Hardenable AA7108 Aluminum Alloy
  242. Altmetric Badge
    Chapter 268 A Study of the Influence of Strain Hardening and Precipitation Hardening Sequence on Mechanical Properties of AlMgSi Conductor Alloys
  243. Altmetric Badge
    Chapter 269 Characterization of Pre-Aged AA6061-T6 Sheet Material for Aerospace Applications
  244. Altmetric Badge
    Chapter 270 Controlled Quenching of Aluminum Alloys in Flexible Spray Fields
  245. Altmetric Badge
    Chapter 271 Effect of Coarse Particles on Work Hardening in the Al-Mn Alloy
  246. Altmetric Badge
    Chapter 272 Precipitation behavior of dispersoids in Al-Mg-Si-Cu-Mn-Cr alloy during homogenization annealing
  247. Altmetric Badge
    Chapter 273 Effect of Si Addition on Solid Solution Hardening of Al-Mn Alloys
  248. Altmetric Badge
    Chapter 274 Effects of Deformation Texture Intensities and Precipitates on the Anisotropy of Mechanical Properties of Al-Li Alloy 2099 T83 Extrusions
  249. Altmetric Badge
    Chapter 275 Evolution in Microchemistry and its Effects on Deformation and Annealing Behavior of an AlMnFeSi Alloy
  250. Altmetric Badge
    Chapter 276 Influence of Process Fluctuations on Weld Seam Properties in Aluminum Alloy Extrusion
  251. Altmetric Badge
    Chapter 277 Evolution of Fragmented Fe-Intermetallic Compounds in the Semi-Solid State of Al-Mg-Si-Fe Alloys by Deformation Semi-Solid Forming Process
  252. Altmetric Badge
    Chapter 278 Identification and Distribution of Fe Intermetallic Phases in AA 5657 DC Cast Ingots
  253. Altmetric Badge
    Chapter 279 Microstructure and Mechanical Properties of AA2195 DC Cast Ingot Plates
  254. Altmetric Badge
    Chapter 280 Threshold Deformation for Exhibiting the Hardening on Annealing Behaviour in AA3103 Alloy
  255. Altmetric Badge
    Chapter 281 A Study of the Microstructure, Crystallographic Texture, and Recrystallization in AA4006 Alloy Strips Produced by Twin Roll Caster and Direct Chill Processes
  256. Altmetric Badge
    Chapter 282 Effect of Extensive Rolling on Mechanical Properties of An Al-Mg-Sc Alloy
  257. Altmetric Badge
    Chapter 283 The Effects of Transition Elements on the Control of Recrystallization of Al-Zn-Mg Extrusion
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
2 patents

Readers on

mendeley
7 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
ICAA13 Pittsburgh
Published by
Springer International Publishing, February 2017
DOI 10.1007/978-3-319-48761-8
ISBNs
978-3-31-948225-5, 978-3-31-948761-8
Editors

Weiland, Hasso, Rollett, Anthony D., Cassada, William A.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 7 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 7 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 2 29%
Student > Ph. D. Student 1 14%
Unspecified 1 14%
Student > Postgraduate 1 14%
Researcher 1 14%
Other 0 0%
Unknown 1 14%
Readers by discipline Count As %
Engineering 3 43%
Unspecified 1 14%
Chemistry 1 14%
Materials Science 1 14%
Unknown 1 14%