↓ Skip to main content

Damage and Fracture Mechanics

Overview of attention for book
Cover of 'Damage and Fracture Mechanics'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Determination of the Hardness of the Oxide Layers of 2017A Alloys
  3. Altmetric Badge
    Chapter 2 Effect of Non-Metallic Inclusions on Hydrogen Induced Cracking
  4. Altmetric Badge
    Chapter 3 Defect Assessment on Pipe Transporting a Mixture of Natural Gas and Hydrogen
  5. Altmetric Badge
    Chapter 4 Reliability Analysis of Low Alloy Ferritic Piping Materials
  6. Altmetric Badge
    Chapter 5 Experimental Characterization and Effect of the Triaxiality on the Behavior of the HDPE
  7. Altmetric Badge
    Chapter 6 Effects of Aggressive Chemical Environments on Mechanical Behavior of Polyethylene Piping Material
  8. Altmetric Badge
    Chapter 7 Hydrogen Embrittlement Enhanced by Plastic Deformation of Super Duplex Stainless Steel
  9. Altmetric Badge
    Chapter 8 Hydrogen Effect on Local Fracture Emanating from Notches in Pipeline Steels
  10. Altmetric Badge
    Chapter 9 Reliability Assessment of Underground Pipelines Under Active Corrosion Defects
  11. Altmetric Badge
    Chapter 10 An Overview of the Applications of NDI/NDT in Engineering Design for Structural Integrity and Damage Tolerance in Aircraft Structures
  12. Altmetric Badge
    Chapter 11 Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys
  13. Altmetric Badge
    Chapter 12 Performances of Vehicles'Active Suspensions
  14. Altmetric Badge
    Chapter 13 Damaging Influence of Cutting Tools on the Manufactured Surfaces Quality
  15. Altmetric Badge
    Chapter 14 Design and Test of a Sandwich T-Joint for Naval Ships
  16. Altmetric Badge
    Chapter 15 Vibroacoustic Sources Identification of Gear Mechanism Transmission
  17. Altmetric Badge
    Chapter 16 Prediction of Structural and Dynamic Behaviors of Impacted Plates
  18. Altmetric Badge
    Chapter 17 Application of Structural INTegrity Assessment Procedure to Nuclear Power Plant Component
  19. Altmetric Badge
    Chapter 18 Failure Assessment Diagrams in Structural Integrity Analysis
  20. Altmetric Badge
    Chapter 19 Degradation and Failure of Some Polymers (Polyethylene and Polyamide) for Industrial Applications
  21. Altmetric Badge
    Chapter 20 On the Structural Integrity of the Nano-PVD Coatings Applied on Cutting Tools
  22. Altmetric Badge
    Chapter 21 Investigation of Energy Balance in Nanocrystalline Titanium Under Cyclic Loading
  23. Altmetric Badge
    Chapter 22 Behavior of Stainless Steel 316L Under Impact Test
  24. Altmetric Badge
    Chapter 23 Spall Fracture in ARMCO Iron: Structure Evolution and Spall Strength
  25. Altmetric Badge
    Chapter 24 Damage Modelling of Impacted Tubular Structures by Using Material Property Degradation Approach
  26. Altmetric Badge
    Chapter 25 Fracture Control for Northern Pipelines
  27. Altmetric Badge
    Chapter 26 The Influence of the Interface on Fracture Parameters
  28. Altmetric Badge
    Chapter 27 Crack Propagation in the Vicinity of the Interface Between Two Elastic Materials
  29. Altmetric Badge
    Chapter 28 Fracture Behaviour of TiAl Intermetalics
  30. Altmetric Badge
    Chapter 29 Numerical and Experimental Investigations of Mixed Mode Fracture in Granite Using Four-Point-Bend Specimen
  31. Altmetric Badge
    Chapter 30 Experimental and Numerical Determination of Stress Intensity Factors of Crack in Plate with a Multiple Holes
  32. Altmetric Badge
    Chapter 31 Dynamic Response of Cracked Plate Subjected to Impact Loading Using the Extended Finite Element Method (X-FEM)
  33. Altmetric Badge
    Chapter 32 On Heterogeneity of Welded Joint by Modelling of Diffusion
  34. Altmetric Badge
    Chapter 33 Correlation of Microstructure and Toughness of the Welded Joint of Pipeline Steel X65
  35. Altmetric Badge
    Chapter 34 Effect of the Residual Fatigue Damage on the Static and Toughness Properties
  36. Altmetric Badge
    Chapter 35 Influence of Fatigue Damage in Dynamic Tensile Properties of AISI 4140T Steel
  37. Altmetric Badge
    Chapter 36 Low-Cycle Fatigue of Al—Mg Alloys
  38. Altmetric Badge
    Chapter 37 Damage of Glulam Beams Under Cyclic Torsion: Experiments and Modelling
  39. Altmetric Badge
    Chapter 38 Statistical Study of Temperature Effect on Fatigue Life of Thin Welded Plates
  40. Altmetric Badge
    Chapter 39 Residual Stress Effect on Fatigue Crack Growth of SENT Specimen
  41. Altmetric Badge
    Chapter 40 Analysis of Elliptical Cracks in Static and in Fatigue by Hybridization of Green's Functions
  42. Altmetric Badge
    Chapter 41 Influence of Coating on Friction and Wear of Combustion Engine Piston Rings
  43. Altmetric Badge
    Chapter 42 Optimization Constrained of the Lifetime of the CBN 7020 During the Machining of Steel 100 Cr6
  44. Altmetric Badge
    Chapter 43 Comparison of Simulation Methods of Pulsed Ultrasonic Fields Radiated in Isotropic Solids
  45. Altmetric Badge
    Chapter 44 Investigation of Ag Doping Effects on Na 1.5 Co 2 O 4 Elastic Parameters
  46. Altmetric Badge
    Chapter 45 The Dynamics of Compressible Herschel—Bulkley Fluids in Die-Swell Flows
  47. Altmetric Badge
    Chapter 46 Numerical Simulation of the Behaviour of Cracks in Axisymmetric Structures by the Dual Boundary Element Method
  48. Altmetric Badge
    Chapter 47 Numerical Evaluation of Energy Release Rate for Several Crack Orientation and Position to the Bi-Material Interface Plates
  49. Altmetric Badge
    Chapter 48 Numerical Simulation of the Ductile Fracture Growth Using the Boundary Element Method
  50. Altmetric Badge
    Chapter 49 Enriched Finite Element for Modal Analysis of Cracked Plates
  51. Altmetric Badge
    Chapter 50 A New Generation of 3D Composite Materials: Advantage and Disadvantage
  52. Altmetric Badge
    Chapter 51 Benefit from Embedded Sensors to Study Polymeric Composite Structures
  53. Altmetric Badge
    Chapter 52 Effect of Temperature and Initiator on Glass Fibre/Unsaturated Polyester Composite: Cross-linking, Mechanical Properties
  54. Altmetric Badge
    Chapter 53 Theoretical and Experimental Investigations of the Plane Strain Compression of Amorphous Polymers in the form of a Flat Plate
  55. Altmetric Badge
    Chapter 54 Wavelet-Based Multifractal Identification of Fracture Stages
  56. Altmetric Badge
    Chapter 55 Characterization of Mixed Mode Delamination Growth and Thresholds
  57. Altmetric Badge
    Chapter 56 Modification of Cellulose for an Application in the Waste Water Treatment
  58. Altmetric Badge
    Chapter 57 A Full 3D Simulation of Plastic Forming Using a Heuristic Generalised Contact Algorithm
  59. Altmetric Badge
    Chapter 58 A Novel Approach for Bone Remodeling After Prosthetic Implantation
  60. Altmetric Badge
    Chapter 59 Hybrid Composite-Metal Hip Resurfacing Implant for Active Patient
  61. Altmetric Badge
    Chapter 60 Anisotropic and Unilateral Damage Application to Concrete
  62. Altmetric Badge
    Chapter 61 The Behaviour of Self-Compacting Concrete Subjected to an External Sulphate Attack
  63. Altmetric Badge
    Chapter 62 Mixed Finite Element for Cracked Interface
  64. Altmetric Badge
    Chapter 63 Three-Dimensional T-Stress to Predict the Directional Stability of Crack Propagation in a Pipeline with External Surface Crack
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
1 patent

Citations

dimensions_citation
18 Dimensions

Readers on

mendeley
56 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Damage and Fracture Mechanics
Published by
Springer Netherlands, August 2009
DOI 10.1007/978-90-481-2669-9
ISBNs
978-9-04-812668-2, 978-9-04-812669-9
Editors

Boukharouba, Taoufik, Elboujdaini, Mimoun, Pluvinage, Guy

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 56 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 56 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 19 34%
Student > Master 9 16%
Student > Bachelor 4 7%
Researcher 3 5%
Student > Postgraduate 3 5%
Other 8 14%
Unknown 10 18%
Readers by discipline Count As %
Engineering 30 54%
Materials Science 6 11%
Energy 2 4%
Physics and Astronomy 1 2%
Computer Science 1 2%
Other 1 2%
Unknown 15 27%