↓ Skip to main content

Materials Design and Applications

Overview of attention for book
Cover of 'Materials Design and Applications'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy After Hot Deformation
  3. Altmetric Badge
    Chapter 2 Positron Annihilation Study on Nanocrystalline Copper Thin Films Doped with Nitrogen
  4. Altmetric Badge
    Chapter 3 The Influence of Microstructure on the Mechanical Behaviour of Dual Phase Steels
  5. Altmetric Badge
    Chapter 4 Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides
  6. Altmetric Badge
    Chapter 5 Design of Nanocrystalline Cemented Carbides with High Hardness
  7. Altmetric Badge
    Chapter 6 Probing Oxygen Vacancies in BaTiO 3 Powders and Single Crystals by Micro-Raman Scattering
  8. Altmetric Badge
    Chapter 7 Investigation of Film Formation and Electrical Properties of PS Latex/MWCNT Nanocomposites
  9. Altmetric Badge
    Chapter 8 Cellulose Nanowhiskers Obtained from Waste Recycling of Paper Industry
  10. Altmetric Badge
    Chapter 9 Coffee Powder Reused as a Composite Material
  11. Altmetric Badge
    Chapter 10 Comparison of Mechanical Properties of Polyester Composites Reinforced with Autochthonous Natural Fibres: Flax and Hemp
  12. Altmetric Badge
    Chapter 11 Advanced Epoxy-Based Anticorrosion Coatings Containing Graphite Oxide
  13. Altmetric Badge
    Chapter 12 A Numerical Study of Fenestral Otosclerosis
  14. Altmetric Badge
    Chapter 13 Development and Validation of a Numerical Model for the Optimization of a Brace for Lower Limb
  15. Altmetric Badge
    Chapter 14 Electrical and Geometrical Optimization for a 2DoF Non-linear Energy Harvester
  16. Altmetric Badge
    Chapter 15 Nonlinear Analysis of a Two-Degree-of-Freedom Energy Harvester
  17. Altmetric Badge
    Chapter 16 Experimental Investigations of MR Fluids in Air and Water Used for Brakes and Clutches
  18. Altmetric Badge
    Chapter 17 Hydrodynamic Investigations in a Swirl Generator Using a Magneto-Rheological Brake
  19. Altmetric Badge
    Chapter 18 Direct Digital Manufacturing: A Challenge to the Artistic Glass Production
  20. Altmetric Badge
    Chapter 19 Post-process Influence of Infiltration on Binder Jetting Technology
  21. Altmetric Badge
    Chapter 20 Development of Plaster Mixtures Formulations for Additive Manufacturing
  22. Altmetric Badge
    Chapter 21 FE Modal and Harmonic Analysis of Micro Drill with Ultrasonic Horn
  23. Altmetric Badge
    Chapter 22 Optimization of Machining Parameters to Minimize Surface Roughness in the Turning of Carbon-Filled and Glass Fiber-Filled Polytetrafluoroethylene
  24. Altmetric Badge
    Chapter 23 Investigation and Application of Fe–Co−Cu Based Diamond Cutting Tools with Different Bronze Content Used in Marble Production
  25. Altmetric Badge
    Chapter 24 Investigation of Surface Roughness and Tool Wear in End Milling of Al7075-SiC Co-continuous Composite
  26. Altmetric Badge
    Chapter 25 Machinability of an Aluminium Cast Alloy Using PCD Tools for Turning
  27. Altmetric Badge
    Chapter 26 Optimization of Geometric Quality in a 5 Axis Machining of Curved Surfaces in a EN-AW-7075 Alloy by Taguchi Method
  28. Altmetric Badge
    Chapter 27 The Production-Related Influence of Iron Oxides on Steel Surfaces on the Adhesion of Fusion-Bonded Hybrid Structures
  29. Altmetric Badge
    Chapter 28 Comparison of Stepped, Curved, and S-Type Lap Joints Under Tensile Loading
  30. Altmetric Badge
    Chapter 29 Bonding Strength of Hot-Formed Steel with an AlSi Coating and Approaches to Improve It by Laser Surface Engineering
  31. Altmetric Badge
    Chapter 30 Micro Cork Particles as Adhesive Reinforcement Material for Brittle Resins
  32. Altmetric Badge
    Chapter 31 Magnetic Pulse Welding of Dissimilar Materials: Aluminum-Copper
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
1 patent

Citations

dimensions_citation
7 Dimensions

Readers on

mendeley
58 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Materials Design and Applications
Published by
Springer International Publishing, March 2017
DOI 10.1007/978-3-319-50784-2
ISBNs
978-3-31-950783-5, 978-3-31-950784-2
Editors

Silva, Lucas F. M. da

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 58 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 58 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 13 22%
Student > Ph. D. Student 12 21%
Researcher 4 7%
Student > Bachelor 4 7%
Student > Doctoral Student 3 5%
Other 3 5%
Unknown 19 33%
Readers by discipline Count As %
Engineering 27 47%
Materials Science 4 7%
Chemical Engineering 2 3%
Biochemistry, Genetics and Molecular Biology 1 2%
Chemistry 1 2%
Other 0 0%
Unknown 23 40%