↓ Skip to main content

Materials

Overview of attention for book
Cover of 'Materials'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Mechanical Properties of Incoloy 908 — An Update
  3. Altmetric Badge
    Chapter 2 The Effect of Indium Additions on the Cryogenic Tensile Properties of Superplastically Deformed Al-Cu-Li-Zr Alloy 2090
  4. Altmetric Badge
    Chapter 3 Deformation and Fracture of Al-Li Alloys in Mechanical-Impact Tests
  5. Altmetric Badge
    Chapter 4 Microstructure and Cryogenic Tensile Fracture Behavior of an Al-Li-Zn-Zr Alloy
  6. Altmetric Badge
    Chapter 5 Microstructural Influence on the Work Hardening of Aluminum-Lithium Alloy 2090 at Cryogenic Temperatures
  7. Altmetric Badge
    Chapter 6 Effects of Nb 3 Sn Heat Treatment on the Strength and Toughness of 316LN Alloys with Different Carbon Contents
  8. Altmetric Badge
    Chapter 7 Metastable Austenites in Cryogenic High Magnetic Field Environments
  9. Altmetric Badge
    Chapter 8 Property Evaluation of Ni Base Alloy for Superconducting Generators and Its Application to Seal Welded Joints
  10. Altmetric Badge
    Chapter 9 Vamas Second Round Robin Test of Structural Materials at Liquid Helium Temperature
  11. Altmetric Badge
    Chapter 10 Effect of Hydrogen Charging on Ambient and Cryogenic Mechanical Properties of a Precipitate-Strengthened Austenitic Steel
  12. Altmetric Badge
    Chapter 11 Deformation Measurements of Materials at Low Temperatures Using Laser Speckle Photography Method
  13. Altmetric Badge
    Chapter 12 Hydrogen Effect on the Mechanical Properties of Incoloy 907 from Ambient to Cryogenic Temperature
  14. Altmetric Badge
    Chapter 13 Thick-Section Weldments in 21-6-9 and 316LN Stainless Steel for Fusion Energy Applications
  15. Altmetric Badge
    Chapter 14 Joining of Austenitic Stainless Steels for Cryogenic Applications
  16. Altmetric Badge
    Chapter 15 Creep of Indium at Low Temperatures
  17. Altmetric Badge
    Chapter 16 1100 Hour Creep Test Results for OFHC Copper: Validation of Previously Published Results
  18. Altmetric Badge
    Chapter 17 Fatigue and Fatigue Crack Growth Properties of 316LN and Incoloy 908 Below 10 K
  19. Altmetric Badge
    Chapter 18 Deformation Structures in High-Cycle Fatigue of 0.1N-32Mn-7Cr Steel at Cryogenic Temperatures
  20. Altmetric Badge
    Chapter 19 Near-Threshold Fatigue Crack Growth of Austenitic Stainless Steels at Liquid Helium Temperature
  21. Altmetric Badge
    Chapter 20 Long-Crack Fatigue Thresholds and Short Crack Simulation at Liquid Helium Temperature
  22. Altmetric Badge
    Chapter 21 Superconductor Conduits: Fatigue Crack Growth Rate and Near-Threshold Behavior of Three Alloys
  23. Altmetric Badge
    Chapter 22 High-Cycle Fatigue Properties of Titanium Alloys at Cryogenic Temperatures
  24. Altmetric Badge
    Chapter 23 Cold Thermal Fatigue of Austenitic Stainless Steel
  25. Altmetric Badge
    Chapter 24 Influence of Aging on the Fracture Toughness of Cryogenic Austenitic Materials, Evaluated by a Simple Test Method
  26. Altmetric Badge
    Chapter 25 Effects of Boron on Increasing Toughness of High Strength High Manganese Non-Magnetic Steels
  27. Altmetric Badge
    Chapter 26 The Charpy Impact Test as an Evaluation of 4 K Fracture Toughness
  28. Altmetric Badge
    Chapter 27 Charpy Specimen Tests at 4 K
  29. Altmetric Badge
    Chapter 28 Selected Residual Effects Upon Temperature Transitions
  30. Altmetric Badge
    Chapter 29 Reactor Neutron and Gamma Irradiation of Various Composite Materials
  31. Altmetric Badge
    Chapter 30 Radiation Damage of Glass-Fiber-Reinforced Composite Materials at Low Temperatures
  32. Altmetric Badge
    Chapter 31 Effects of Fabric Type, Specimen Size, and Irradiation Atmosphere on the Radiation Resistance of Polymer Composites at 77 K
  33. Altmetric Badge
    Chapter 32 A Radiation-Resistant Epoxy Resin System for Toroidal Field and Other Superconducting Coil Fabrication
  34. Altmetric Badge
    Chapter 33 Effects of Radiation on Insulation Materials
  35. Altmetric Badge
    Chapter 34 Radiation Effects on High Current Diodes at Cryogenic Temperatures in an Accelerator Environment
  36. Altmetric Badge
    Chapter 35 Alumina Dispersion-Strengthened Copper Alloy Matrix Ti Added Nb 3 Sn Wire by the Tube Process
  37. Altmetric Badge
    Chapter 36 Electrical Resistivity of Nanocrystalline Ni-P Alloys
  38. Altmetric Badge
    Chapter 37 Magnetic Property of Gadolinium Hydrides
  39. Altmetric Badge
    Chapter 38 Quench Protection Diodes for the Large Hadron Collider LHC at CERN
  40. Altmetric Badge
    Chapter 39 Coefficient of Friction Measurements of Solid Film Lubricants at Cryogenic Temperatures
  41. Altmetric Badge
    Chapter 40 Magneto-Transport Properties of Filamentary Aluminum Conductors in Magnetic Fields, 12 — 30 K
  42. Altmetric Badge
    Chapter 41 Tribological Behavior of 440C Martensitic Stainless Steel from −184°C to 750°C
  43. Altmetric Badge
    Chapter 42 Scaling Tests on Smooth and Notched Specimens of Polyimide (SINTIMID) at Cryogenic Temperatures
  44. Altmetric Badge
    Chapter 43 Several Properties of Impregnating Epoxy Resins Used for Superconducting Coils
  45. Altmetric Badge
    Chapter 44 Shear Behavior of Glass-Reinforced Systems at Low Temperatures
  46. Altmetric Badge
    Chapter 45 Shear Fracture Tests (Mode II) on Fiber Reinforced Plastics at Room and Cryogenic Temperatures
  47. Altmetric Badge
    Chapter 46 Compression and Shear Tests of Vacuum-Impregnated Composites at Cryogenic Temperatures
  48. Altmetric Badge
    Chapter 47 Cryogenic Fatigue Testing of Glass Reinforced Epoxy Tubes
  49. Altmetric Badge
    Chapter 48 Glass-Film-Glass Hybrid Organic Composites for Forced-Flow Fusion Magnets
  50. Altmetric Badge
    Chapter 49 Fracture-Mechanical Characterization of Fiber Reinforced Plastics in the Crack-Opening-Mode (Mode I)
  51. Altmetric Badge
    Chapter 50 Fracto-Emission from Crystalline and Non-Crystalline Materials at Cryogenic Temperatures
  52. Altmetric Badge
    Chapter 51 Friction and Wear of Radiation Resistant Composites, Coatings and Ceramics in Vacuum and Low Temperature Environment
  53. Altmetric Badge
    Chapter 52 An Innovative Process for the Impregnation of Magnet Coils and Other Structures
  54. Altmetric Badge
    Chapter 53 Large Scale Tests of Composite Support Struts for Superconducting Magnetic Energy Storage Rings
  55. Altmetric Badge
    Chapter 54 Friction and Wear of a Three-Dimensional Fabric-Reinforced Plastic at Room Temperature and Liquid Nitrogen Temperature
  56. Altmetric Badge
    Chapter 55 Modification of the ASTM D 3039 Tensile Specimen for Cryogenic Applications
  57. Altmetric Badge
    Chapter 56 Thermal Insulating Support Systems for Radiation Environments
  58. Altmetric Badge
    Chapter 57 Fatigue Behavior of UD-Carbon-Fibre Composites at Cryogenic Temperatures
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
16 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Materials
Published by
Springer US, June 2013
DOI 10.1007/978-1-4757-9050-4
ISBNs
978-1-4757-9052-8, 978-1-4757-9050-4
Editors

Fickett, F. R., Reed, R. P.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.