Supercollider 4

Table of Contents

1. Altmetric Badge
   Book Overview
2. Altmetric Badge
   Chapter 1 Opening Remarks, International Industrial Symposium on the Superconducting Super Collider
3. Altmetric Badge
   Chapter 2 An Assessment of the SSC Impact on the Training and Employment Needs of North Central Texas
4. Altmetric Badge
   Chapter 3 Building Blocks of the Universe
5. Altmetric Badge
   Chapter 4 SSC Education: Science to Capture the Imagination
6. Altmetric Badge
   Chapter 5 Summary of the Performance of Superconducting Cable Produced for the Accelerator System String Test Program
7. Altmetric Badge
   Chapter 6 Development of NbTi Superconductor for the SSC by Sumitomo Electric Industries
8. Altmetric Badge
   Chapter 7 A Novel Approach to Make Fine Filament Superconductors
9. Altmetric Badge
   Chapter 8 Recent Results in Developing NbTi Fine Filament Superconductors
10. Altmetric Badge
    Chapter 9 Recent Results in Manufacturing Niobium Titanium Superconductor for the SSC Project
11. Altmetric Badge
    Chapter 10 GIS/FIS Development for the SSC
12. Altmetric Badge
    Chapter 11 Successful NEPA Compliance at the Superconducting Super Collider Laboratory: A Case Study
13. Altmetric Badge
    Chapter 12 Archaeology of the Superconducting Super Collider
14. Altmetric Badge
    Chapter 13 Protection of Prehistoric and Historic Properties at the Superconducting Super Collider
15. Altmetric Badge
    Chapter 14 Use of Pesticides at the SSC: Approval, Reporting, and Monitoring Requirements
16. Altmetric Badge
    Chapter 15 Medical Surveillance of Employee Health at the Superconducting Super Collider Laboratory
17. Altmetric Badge
    Chapter 16 Review of SSC Dipole Magnet Mechanics and Quench Performance
18. Altmetric Badge
    Chapter 17 A Summary of SSC Dipole Magnet Field Quality Measurements
19. Altmetric Badge
    Chapter 18 The Engineering Development of an Actively Controlled Precise MUON Chamber for the SDC Detector
20. Altmetric Badge
    Chapter 19 Mechanical Considerations for a SDC Central Straw Tracker for the SSCL
21. Altmetric Badge
    Chapter 20 An Engineering Design Study of Detector Deformation Limits in the SSC SDC-Detector
22. Altmetric Badge
    Chapter 21 The Prototyping and Evaluation of Remote Alignment Monitoring Schemes for SDC Muon System Supermodules
23. Altmetric Badge
    Chapter 22 Mechanical Design and Finite Element Analysis of the SDC Central Calorimeter
24. Altmetric Badge
    Chapter 23 Design and Construction of the SSCL Magnet Test Laboratory Cryogenic Systems
25. Altmetric Badge
    Chapter 24 Commissioning and Acceptance Tests of the High Efficient 6kW Helium Refrigerator for the LEP 200 Project at CERN
26. Altmetric Badge
    Chapter 25 84 K Nitrogen System for the SSC
27. Altmetric Badge
    Chapter 26 Materials and Processes Selection for SSC Collider Dipole Magnets
28. Altmetric Badge
    Chapter 27 Utilization of Gamma Ray Inspection System for Tomographic Imaging and Dimensional Analysis of Complete Model Magnet Cold Masses and Collared Coil Sections
29. Altmetric Badge
    Chapter 28 Thermal Performance of Various Multilayer Insulation Systems Below 80K
30. Altmetric Badge
    Chapter 29 A Proposed IR Quad for the SSC
31. Altmetric Badge
    Chapter 30 Magnetic Field Measurements of Fermilab/General Dynamics Built Full Scale SSC Collider Dipole Magnets
32. Altmetric Badge
    Chapter 31 SSC Collider Quadrupole Cold Mass Design and Development
33. Altmetric Badge
    Chapter 32 The Effect of Vacuum Gas Pressures and Species on Internal Heat Leak in the SSCL Magnet Design
34. Altmetric Badge
    Chapter 33 Sextupole Corrector Coil Manufacture Using the Direct Wire Fabrication Process
35. Altmetric Badge
    Chapter 34 Support System Design Options for Accommodating Cqm Cold Mass Thermal Contraction
36. Altmetric Badge
    Chapter 35 Design and Construction Experience with Collet end Clamps for 50 mm Aperture SSC Collider Dipoles
37. Altmetric Badge
    Chapter 36 A Cryogenic Support Post for SSC Quadrupole Magnets
38. Altmetric Badge
    Chapter 37 Transient Thermal and Stress Analysis of a CQM Cold Mass
39. Altmetric Badge
    Chapter 38 Structural Dynamic Analysis of the SSC 40 mm Collider Dipole Magnet Under Transportation Loads
40. Altmetric Badge
    Chapter 39 Analytical Study of the Thermal Insulation System in the Interconnect Region of the SSC Collider Magnets
41. Altmetric Badge
    Chapter 40 High-Accuracy, Two-Dimensional Magnetic Field Multipole Calculations for Accelerator Magnets
42. Altmetric Badge
    Chapter 41 Magnetic Optimization of the HEB Dipole Magnet end Section
43. Altmetric Badge
    Chapter 42 Transient Cooldown Stresses in Superconducting Collider Dipole Magnet
44. Altmetric Badge
    Chapter 43 Stress Relaxation in SSC 50mm Dipole Coils
45. Altmetric Badge
    Chapter 44 Theoretical Methods for Creep and Stress Relaxation Studies of SSC Coil
46. Altmetric Badge
    Chapter 45 Quench Performance of Fermilab/General Dynamics Built Full Length SSC Collider Dipole Magnets
47. Altmetric Badge
    Chapter 46 SSC Dipole Magnet Manufacturing Facility Implementation
48. Altmetric Badge
    Chapter 47 Electrodeposition of Copper on the Internal Walls of Colliders in Beam Tubes
49. Altmetric Badge
    Chapter 48 Pressure Relief Radial Passages for SSC
50. Altmetric Badge
    Chapter 49 Overview of a Robotic System for Azimuthal Dimensions of SSC Dipole Coils
51. Altmetric Badge
    Chapter 50 Overview and Statistical Failure Analyses of the Electrical Insulation System for the SSC Long Dipole Magnets from an Industrialization Point of View
52. Altmetric Badge
    Chapter 51 A Precise Technique for Manufacturing Correction Coil
53. Altmetric Badge
    Chapter 52 A Design for a High Voltage Magnet Coil Ringer Test Set
54. Altmetric Badge
    Chapter 53 Evolution of the CDM Design
55. Altmetric Badge
    Chapter 54 Mechanical Behavior of Fermilab/General Dynamics Built 15M SSC Collider Dipoles
56. Altmetric Badge
    Chapter 55 Quench Performance of Six Similar 17 m-Long, 40 mm-Aperture SSC Model Dipoles
57. Altmetric Badge
    Chapter 56 Quench Plateau, Coil Cure Temperature, and Copper-to-Superconductor Ratio in Recent 1.8 m SSC Model Dipoles
58. Altmetric Badge
    Chapter 57 Conceptual Design of the SSC Cryogenic Transfer Lines
59. Altmetric Badge
    Chapter 58 Automating the Strain Gauge Data Acquisition of Dipole Magnets During Keying and Skinning
60. Altmetric Badge
    Chapter 59 Magnetic Measurement Instrumentation Developments at the SSC
61. Altmetric Badge
    Chapter 60 Design and Use of a Mechanical Gage for Measuring Alignment of Critical Features of String Test Magnets
62. Altmetric Badge
    Chapter 61 Performance of the Magcool-Subcooler Cryogenic System After 50 mm SSC Dipole Quenches
63. Altmetric Badge
    Chapter 62 A Statistical Rationale for Establishing Process Quality Control Limits Using Fixed Sample Size, for Critical Current Verification of SSC Superconducting Wire
64. Altmetric Badge
    Chapter 63 Quality System Design and Development for SSC Superconductor Cable
65. Altmetric Badge
    Chapter 64 Alternative Alignment Applications for the Collider Dipole Magnet: Capability Indices
66. Altmetric Badge
    Chapter 65 Application of a B&W Developed Computer Aided Pictorial Process Planning System to CQMS for Manufacturing Process Control
67. Altmetric Badge
    Chapter 66 Construction Experience with Fermilab-Built Full-Length 50mm SSC Dipoles
68. Altmetric Badge
    Chapter 67 Results from the Fermilab 1.5 M Model Magnet Program
69. Altmetric Badge
    Chapter 68 Construction and Test Results from 15 m-Long, 50 mm Aperture SSC Collider Dipole Models
70. Altmetric Badge
    Chapter 69 Results from a Partial Lifetime Test of a 40-mm-Aperture, 17-m-Long SSC Model Dipole
71. Altmetric Badge
    Chapter 70 Construction and Test Results from 1.8 M-Long, 50 Mm Aperture SSC Model Collider Dipoles
72. Altmetric Badge
    Chapter 71 Two-Dimensional Magnetic Analysis of the SDC Muon Toroid
73. Altmetric Badge
    Chapter 72 A New Concept of Multiplexed Optical Transmission Readout Scheme for a Silicon Strip Detector
74. Altmetric Badge
    Chapter 73 The Design of the Cerenkov Counter for the SDC Detector
75. Altmetric Badge
    Chapter 74 Silicon-Based Tracking System: Mechanical Engineering and Design
76. Altmetric Badge
    Chapter 75 The Solenoidal Detector Collaboration Silicon Detector System
77. Altmetric Badge
    Chapter 76 Effects of Mounting Methods on Temperature Sensor Accuracy Below 10K
78. Altmetric Badge
    Chapter 77 High Efficiency, High Reliability, Improved Oil Injected Helium Screw Compressor
79. Altmetric Badge
    Chapter 78 Thermal Optimization of the Helium-Cooled Power Leads for the SSC
80. Altmetric Badge
    Chapter 79 Development of an Ultra Low Heat Leak Cryogenic Valve for the SSC Tunnel Spool Pieces
81. Altmetric Badge
    Chapter 80 Conceptual Design of a Superconducting Mhd Propulsion System
82. Altmetric Badge
    Chapter 81 Raw Materials and Early Monofilament Analysis from the Vendor Qualification Program
83. Altmetric Badge
    Chapter 82 Cable Keystone Angle Optimization for 40-Mm SSC Quadrupole Magnet Development
84. Altmetric Badge
    Chapter 83 Eddy Current Inspection of Superconducting Cable During Manufacturing
85. Altmetric Badge
    Chapter 84 Cold Weld Analysis in SSC Strand and Cable
86. Altmetric Badge
    Chapter 85 Results of AC Loss Measurements on SSC Conductors
87. Altmetric Badge
    Chapter 86 Temperature Dependence of the Critical Current Density in SSC-Type Superconducting Wires
88. Altmetric Badge
    Chapter 87 SSCL Quality Program Overview
89. Altmetric Badge
    Chapter 88 SSCL Magnet Systems Quality Program Implementation for Laboratory and Industry
90. Altmetric Badge
    Chapter 89 Total Quality: a Proven Approach for Magnet Manufacture
91. Altmetric Badge
    Chapter 90 DC Dielectric Breakdown Tests of Liquid Helium at Temperatures 1.8K to 4.2K
92. Altmetric Badge
    Chapter 91 Testing and Performance of High Temperature Superconducting Current Leads
93. Altmetric Badge
    Chapter 92 SSC 50 mm Collider Dipole Cryostat Single Tube Support Post Conceptual Design and Analysis
94. Altmetric Badge
    Chapter 93 Welding Vision System for SSC 50mm Yoke-Skinning Production
95. Altmetric Badge
    Chapter 94 Axial Variations in the Magnetic Field of Superconducting Dipoles
96. Altmetric Badge
    Chapter 95 Correcting Field Harmonics After Design in Superconducting Magnets
97. Altmetric Badge
    Chapter 96 Barium Fluoride Crystal Calorimeter for GEM
98. Altmetric Badge
    Chapter 97 Radiation Damage in Large Barium Fluoride Crystals
99. Altmetric Badge
    Chapter 98 Radiation Damage of Rare Earth Ions Doped Barium Fluoride Crystals
100. Altmetric Badge
     Chapter 99 Improved Process for Manufacture of Radiation Hard N-Channel JFETs for Detector Electronics
101. Altmetric Badge
     Chapter 100 Overview of SSC Accelerator Requirements
102. Altmetric Badge
     Chapter 101 The SSC Linac: Status of Design and Procurement Activities
103. Altmetric Badge
     Chapter 102 An Updated Overview of the LEB RF System
104. Altmetric Badge
     Chapter 103 Engineering Design Considerations for the Energy Storage Inductors Used in the LEB Power Supply
105. Altmetric Badge
     Chapter 104 Measured Control Characteristics of the Half-Cell 40mm Aperture Magnet String
106. Altmetric Badge
     Chapter 105 The Protection System for the Superconducting Electromagnet Ring of the UNK
107. Altmetric Badge
     Chapter 106 The Magnet Database System
108. Altmetric Badge
     Chapter 107 The Quench Detector on Magnetic Modulator for the UNK Quench Protection System
109. Altmetric Badge
     Chapter 108 Requirements Control System Applied to Collider Dipole Magnet Development
110. Altmetric Badge
     Chapter 109 A Dynamic Model for Beam Tube Vacuum Effects on the SSC Cryogenic System
111. Altmetric Badge
     Chapter 110 A Facility Description of the SSCL Magnet Test Laboratory
112. Altmetric Badge
     Chapter 111 Transportation Studies: 40-mm Collider Dipole Magnets
113. Altmetric Badge
     Chapter 112 Experiments to Improve Materials for SSC Magnets
114. Altmetric Badge
     Chapter 113 Subsidence of the Pit Slab at SLC Experimental Hall
115. Altmetric Badge
     Chapter 114 Development of Fine Filament Superconducting Wires and Cables for Accelerators
116. Altmetric Badge
     Chapter 115 Development of High Strength Aluminum-Stabilized Superconductor for the SDC Detector
117. Altmetric Badge
     Chapter 116 Connectivity Among Computer-Aided Engineering Methods, Procedures, and Tools Used in Developing the SSC Collider Magnets
118. Altmetric Badge
     Chapter 117 Control and Data Acquisition System for the B&W Vertical Dewar Facility
119. Altmetric Badge
     Chapter 118 Current Oscillations in Superconducting Windings
120. Altmetric Badge
     Chapter 119 Evaluation of Technology Transfer on Collider Quadrupole Manufacture at LBL
121. Altmetric Badge
     Chapter 120 Interim Report on Technology Transfer on Collider Quadrupole Manufacture at LBL and SSCL
122. Altmetric Badge
     Chapter 121 A Circuit Theory Approach to Quantifying Thermal Performance of Cryostat Designs for SSC Dipole Magnets
123. Altmetric Badge
     Chapter 122 A Method of Predicting the Reliability of CDM Coil Insulation
124. Altmetric Badge
     Chapter 123 Software Design Philosophy for the SSCL Magnet Test Laboratory
125. Altmetric Badge
     Chapter 124 System Design Overview for the Magnet Test Database System
126. Altmetric Badge
     Chapter 125 Investigation of Azimuthal Stresses Due to Welding and Cooldown
127. Altmetric Badge
     Chapter 126 Design of a Sensitive Calorimeter for Use in AC Loss Measurements
128. Altmetric Badge
     Chapter 127 Temperature Dependence of the Viscoelastic Properties of SSC Coil Insulation (Kapton)
129. Altmetric Badge
     Chapter 128 Measurement of the Elastic Modulus of Kapton Perpendicular to the Plane of the Film at Room and Cryogenic Temperatures
130. Altmetric Badge
     Chapter 129 An Overview of Recent Progress Using Low-Cost and Cost-Effective Composite Materials and Processes to Produce SSC Magnet Coils and Associated Non-Metallic Parts
131. Altmetric Badge
     Chapter 130 Production, Metallurgy, and Utilization of High Manganese Nonmagnetic Steel—Its Development for the SSC Magnet
132. Altmetric Badge
     Chapter 131 Manufacturing and Magnetic Characteristics of High Purity Ultra Low Carbon Magnet Steel for the SSC
133. Altmetric Badge
     Chapter 132 Dipole Magnet Shuttle System
134. Altmetric Badge
     Chapter 133 Current Development of the Superconducting Wires and Cables for SSC in Hitachi Cable, Ltd.
135. Altmetric Badge
     Chapter 134 The Cryogenic System for the MTL Magnet Test Stands
136. Altmetric Badge
     Chapter 135 A Version of the Radiation-Resistant Fast Calorimeter
137. Altmetric Badge
     Chapter 136 High Resolution Method of the Magnetic Axis Localization for Multipole Magnets on the Base of the Garnet Films Technology
138. Altmetric Badge
     Chapter 137 Concept Design of the High-Voltage Transmission System for the Collider Tunnel
139. Altmetric Badge
     Chapter 138 SDC Detector Foundation Requirements
140. Altmetric Badge
     Chapter 139 Engineering the SSC Underground
141. Altmetric Badge
     Chapter 140 Systems Engineering at the Superconducting Super Collider
142. Altmetric Badge
     Chapter 141 Implementing Corrective Actions from the Failure Reporting, Analysis and Corrective Action System (FRACAS) to Achieve Magnet Reliability and Availability Goals
143. Altmetric Badge
     Chapter 142 Risk Management as Applied to Collider Dipole Magnet Development
144. Altmetric Badge
     Chapter 143 Summary of Production Development, Details, and Results for Model Dipoles at SSCL
145. Altmetric Badge
     Chapter 144 Status of the Magnetic Design of the SSC Dipole Magnets
146. Altmetric Badge
     Chapter 145 Alternate Manufacturing Processes and Materials for the SSC Dipole Magnet Coil End Parts
147. Altmetric Badge
     Chapter 146 Manufacturing Concepts for the Collider Quadrupole Collared Coils
148. Altmetric Badge
     Chapter 147 Neural Networks as First Level Triggers in Scintillating Fiber Detectors
149. Altmetric Badge
     Chapter 148 Performance of a Prototype High Pressure Gas Sampling Calorimeter
150. Altmetric Badge
     Chapter 149 Simulated Performance of a Hybrid Tracking System for the SDC Detector at the SSC
151. Altmetric Badge
     Chapter 150 A Novel Photomultiplier Tube for Calorimetry at the SSC