↓ Skip to main content

Advanced Science and Technology of Sintering

Overview of attention for book
Cover of 'Advanced Science and Technology of Sintering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Influence of External Fields on Sintering
  3. Altmetric Badge
    Chapter 2 Liquid-Phase Sintering of the Systems With Interacting Components
  4. Altmetric Badge
    Chapter 3 Simulation of Two-Dimensional Microstructural Development During Liquid Phase Sintering
  5. Altmetric Badge
    Chapter 4 Sintering Kinetic Analysis by Dilatometric Data Obtained at Different Heating Rates
  6. Altmetric Badge
    Chapter 5 Computer Study of Microstructure Formation by Rearrangement During Liquid Phase Sintering
  7. Altmetric Badge
    Chapter 6 Computer Simulation of Neck Growth During Sintering Process
  8. Altmetric Badge
    Chapter 7 Phenomenology of Sintering Kinetics Using UO 2 as a Model
  9. Altmetric Badge
    Chapter 8 Contraction of the Complex Models by the Stoichiometric Network Analysis
  10. Altmetric Badge
    Chapter 9 Electron Structure of YNi 2 X 2 (X=Si, P) Compounds
  11. Altmetric Badge
    Chapter 10 Computer Generation of Two — and three — Dimensional Packings as a Background for Numerical Modeling of Sintering Processes
  12. Altmetric Badge
    Chapter 11 Scientific and Technological Problems in Nanostructured Materials Science
  13. Altmetric Badge
    Chapter 12 Aerosol Synthesis of Nanostructured Materials
  14. Altmetric Badge
    Chapter 13 Preparation of Fine, Spherical, Composite Powder by Spray Pyrolysis
  15. Altmetric Badge
    Chapter 14 Synthesis of Submicronic Oxide Powders by Aerosol Spray Pyrolysis: Modeling of the Evaporation Stage
  16. Altmetric Badge
    Chapter 15 Nanostructure Composition of Diamond-WC-Co
  17. Altmetric Badge
    Chapter 16 Pequliarities of Fine-Dispersion SiC and Si 3 N 4 Powders Obtained from Titanium-Magnesium Production Waste
  18. Altmetric Badge
    Chapter 17 Sintering of Nanocrystalline Zirconia-Based Ceramics
  19. Altmetric Badge
    Chapter 18 Analysis of Thermal Treatment of ZnO Derived by the Freeze-Drying Method
  20. Altmetric Badge
    Chapter 19 The Effect of Shock-Wave Treatment on the Structural Characteristics of Synthetic Diamond Powders
  21. Altmetric Badge
    Chapter 20 Structural Properties of Ultradispersed Bi-Pb-Sr-Ca-Cu-O Particles Synthesized from Aerosol
  22. Altmetric Badge
    Chapter 21 Interaction of the Powder Particles with the Plasma of the Impulse Discharges and the use of this Process for Creation of Protective Coverages
  23. Altmetric Badge
    Chapter 22 Mechanical Activation of BaCO 3 -Al 2 O 3 -SiO 2
  24. Altmetric Badge
    Chapter 23 Mechanochemical Synthesis of Nanophased Carbide TiC
  25. Altmetric Badge
    Chapter 24 Mathematical Modeling of Combustion-Type Interaction During Mechanical Alloying
  26. Altmetric Badge
    Chapter 25 Evolution of the Microstructure of Disperse ZnO During Mechanical Activation and its Influence on Sinterability
  27. Altmetric Badge
    Chapter 26 Physical Properties of Mechanically Activated Grains
  28. Altmetric Badge
    Chapter 27 Change of the Physical — Chemical Characteristics of the Materials by Mechanical Activation
  29. Altmetric Badge
    Chapter 28 Mechanically Activated BaCO 3 -Al 2 O 3 -SiO 2 Mixture as an Additive for Liquid Phase Sintering of Si 3 N 4
  30. Altmetric Badge
    Chapter 29 Mechanical Activation of Mica
  31. Altmetric Badge
    Chapter 30 The Influence of Mechanical Treatment on Activation of The ZnO-SnO 2 System
  32. Altmetric Badge
    Chapter 31 Vacuum Sintering of Zirconia Based Ceramics
  33. Altmetric Badge
    Chapter 32 A Study of Reactivity and Sinterability of Uranium Dioxide Powder Through Surface Adsorption
  34. Altmetric Badge
    Chapter 33 Sintering and Creation of Porous Structure of Bioactive Ceramics
  35. Altmetric Badge
    Chapter 34 Analysis of the Sintering Process of ZnO and CdO by the Application of Sintering Diagrams
  36. Altmetric Badge
    Chapter 35 Ceramic Properties of the Sintered Materials in the Sn-Sb-Cu-O System
  37. Altmetric Badge
    Chapter 36 Grain Growth in System CdO-Bi 2 O 3
  38. Altmetric Badge
    Chapter 37 The Influence of the Composition and time of Isothermal Sintering on the Microstructure of the CdO-Bi 2 O 3 System
  39. Altmetric Badge
    Chapter 38 Characterization of Thick Films of Fe 2 O 3 Obtained by Chemical Deposition
  40. Altmetric Badge
    Chapter 39 Evolution of the Surface and Internal Structure of Silica Aerogels During the Isothermal Sintering Process
  41. Altmetric Badge
    Chapter 40 Sintering Conditions and Hydraulic Activity of 4CaO.3Al 2 O 3 .SO 3
  42. Altmetric Badge
    Chapter 41 Thermal Shock Behavior of Sintered Alumina Based Refractories
  43. Altmetric Badge
    Chapter 42 Sintering of Sulphoaluminate Clinker
  44. Altmetric Badge
    Chapter 43 Prognosis of The Mineralogical Composition of Sintered Portland Cement Clinker
  45. Altmetric Badge
    Chapter 44 Eds Analysis of Sintered Material Degradation In An Aggressive Environment
  46. Altmetric Badge
    Chapter 45 Evolution of the Phase Composition During Sintering of the MgO-Al 2 O 3 -SiO 2 System
  47. Altmetric Badge
    Chapter 46 Experiences In The Chemical Gypsum-Phosphogypsum Preparation From The Triad ”Synthesis-Structure-Properties” Viewpoint
  48. Altmetric Badge
    Chapter 47 Model of Drawing Thin Glass Sheet From A Rectangular Preform and Its Applications
  49. Altmetric Badge
    Chapter 48 Crystallisation Kinetics of Layered Silicates In Glass
  50. Altmetric Badge
    Chapter 49 The Effect of Atmosphere On Hds Catalyst Sintering
  51. Altmetric Badge
    Chapter 50 The Stability of Porous Alumina Catalyst Support Against Sintering
  52. Altmetric Badge
    Chapter 51 Synthesis and Sintering Of PZT Ceramics
  53. Altmetric Badge
    Chapter 52 Advances In Sintered Electronic Materials
  54. Altmetric Badge
    Chapter 53 Sintering of ZnO Doped SnO 2
  55. Altmetric Badge
    Chapter 54 Far Infrared Properties of BaTiO 3 Ceramics
  56. Altmetric Badge
    Chapter 55 Characterization of Domain Structure In BaTiO 3 Based Ceramics by Scanning Electron Microscopy
  57. Altmetric Badge
    Chapter 56 Fractals In Ceramic Structure
  58. Altmetric Badge
    Chapter 57 The Influence of Heating Rate On Sintering Process of BaTiO 3 Ceramics
  59. Altmetric Badge
    Chapter 58 Microstructural Characterization BaTiO 3 - Composite Ceramics
  60. Altmetric Badge
    Chapter 59 Semiconducting Properties of Doped Barium-Lead-Titanate Ceramics
  61. Altmetric Badge
    Chapter 60 Synthesis and Dielectric Properties of BaTiO 3 -Novolac Composite
  62. Altmetric Badge
    Chapter 61 Resistivity Versus Geometry Relation In Bulk - Sintered And Thick Film MnCoFe - Oxide Thermistors
  63. Altmetric Badge
    Chapter 62 BaTiO 3 Structure Prognosis
  64. Altmetric Badge
    Chapter 63 Synthesis And Sintering of Manganese Doped SnO 2 In Several Atmospheres
  65. Altmetric Badge
    Chapter 64 Sintering of MnZn Ferrite In The Presence of Bi 2 O 3 Phase
  66. Altmetric Badge
    Chapter 65 The Influence of Sintering On The Properties of Lithium Ferrite
  67. Altmetric Badge
    Chapter 66 Developments in the Powder Metallurgy of Non-Oxide Cermets
  68. Altmetric Badge
    Chapter 67 Sintering Behaviour and Microstructure Development in Electroconductive Si 3 N 4 -TiN Composites
  69. Altmetric Badge
    Chapter 68 Structural and Mechanical Characteristics of ZA27 - 7Wt.% SiC Composites
  70. Altmetric Badge
    Chapter 69 Explosive Consolidation of Aluminium Nitride Powder
  71. Altmetric Badge
    Chapter 70 Characterization of Metal and Semiconducting Powders Using a Coherer
  72. Altmetric Badge
    Chapter 71 The Influence of Thermo-Plastic Deformation on the Structure and Mechanical Properties of Powder Metallurgy Materials
  73. Altmetric Badge
    Chapter 72 The Influence of Sintering Conditions on the Microstructure and Magnetic Properties of Sintered SmCo 5 Magnets
  74. Altmetric Badge
    Chapter 73 The Influence of Different Binders and Metals on the Properties of Sintered Metal-Graphite Materials
  75. Altmetric Badge
    Chapter 74 Thermophysical Properties of Hot-Deformed Powder Materials
  76. Altmetric Badge
    Chapter 75 Copper Matrix Strengthening in Cu-Al 2 O 3 System by Mechanical Alloying and Milling of Pure Copper and Prealloyed Copper Powders
  77. Altmetric Badge
    Chapter 76 Hardening Mechanisms in Some Prealloyed Pm Treated Copper Powders
  78. Altmetric Badge
    Chapter 77 Recrystallization of Cold-Pressed Aluminium Powder
  79. Altmetric Badge
    Chapter 78 Generation of Dislocations During Cold Sintering of Iron Powder
  80. Altmetric Badge
    Chapter 79 Investigation of Mathematical Relations Between Technological Parameters and Properties of Cold-Sintered Iron
  81. Altmetric Badge
    Chapter 80 Thermal Recovery of Cold Sintered Mechanically Activated Powder System Cu70%Fe30%
  82. Altmetric Badge
    Chapter 81 The Interface Characterization of Laminar Nickel-Alumina Composites
  83. Altmetric Badge
    Chapter 82 The Influence of Al 2 O 3 Addition on Electrical Properties of Sintered Copper
  84. Altmetric Badge
    Chapter 83 The Effect of the Deformation Degree on the Kinetics of Structural Relaxation of the Fe 89.8 ,Ni 1.5 Si 5.2 B 3 C 0.5 Amorphous Alloy
  85. Altmetric Badge
    Chapter 84 Investigating Possibilities of Sintering Process Monitoring by Acoustic Emission as an On-Line Method
  86. Altmetric Badge
    Chapter 85 The Effect of Annealing on the Transport Properties of the Metastable Cu 85 Co 15 Alloy
  87. Altmetric Badge
    Chapter 86 The Influence of Volume Fraction and Size of SiC Particles on the Mechanical Properties of Metal Matrix Composites
  88. Altmetric Badge
    Chapter 87 Investigation of the Microstructure and Distribution of Solute During Solidification of Al-Cu Alloy
  89. Altmetric Badge
    Chapter 88 Properties of Cold Rolled Sintered Copper Alloys After Annealing
  90. Altmetric Badge
    Chapter 89 The Effect of Copper Contents on the Structure of the Aluminium-Copper Alloy
  91. Altmetric Badge
    Chapter 90 Acousto-Electronic Superconducting Switch
  92. Altmetric Badge
    Chapter 91 Sharp Shift Devices
  93. Altmetric Badge
    Chapter 92 Thickness Dependences of Kinetic Properties of Quantum Wires of Pure and Doped Bismuth
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

wikipedia
2 Wikipedia pages

Citations

dimensions_citation
14 Dimensions

Readers on

mendeley
28 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advanced Science and Technology of Sintering
Published by
Springer US, June 2011
DOI 10.1007/978-1-4419-8666-5
ISBNs
978-1-4613-4661-6, 978-1-4419-8666-5
Editors

Stojanović, Biljana D., Skorokhod, Valery V., Nikolić, Maria Vesna

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 28 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 28 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 13 46%
Student > Master 6 21%
Student > Bachelor 3 11%
Student > Doctoral Student 2 7%
Professor 1 4%
Other 1 4%
Unknown 2 7%
Readers by discipline Count As %
Engineering 10 36%
Materials Science 10 36%
Chemistry 3 11%
Chemical Engineering 1 4%
Social Sciences 1 4%
Other 0 0%
Unknown 3 11%