↓ Skip to main content

Light Metals 2012

Overview of attention for book
Cover of 'Light Metals 2012'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Characterization of Bauxite and its Minerals by Means of Thermoanalytical Methods
  3. Altmetric Badge
    Chapter 2 Study on Application of a New Model for the Kinetics of Diaspore Leaching Process
  4. Altmetric Badge
    Chapter 3 Mechanical Activation of Al-Oxyhydroxide Minerals — Physicochemical Changes, Reactivity and Relevance to Bayer Process
  5. Altmetric Badge
    Chapter 4 Research on Mechanically Activated Digestion Performance of Diasporic Bauxite and Kinetics
  6. Altmetric Badge
    Chapter 5 Mechanochemical Activation of Bauxite
  7. Altmetric Badge
    Chapter 6 Effects of Roasting Pretreatment in Intense Magnetic Field on Digestion Performance of High Iron Bauxite
  8. Altmetric Badge
    Chapter 7 Effect of Lime Addition on the Predesilication and Digestion Properties of a Gibbsitic Bauxite
  9. Altmetric Badge
    Chapter 8 Effect of chamosite on Bayer process of special diasporic bauxite with high silica
  10. Altmetric Badge
    Chapter 9 The Economical Flexibility for Processing Diasporic Bauxite
  11. Altmetric Badge
    Chapter 10 Turkey Morcukur Bauxite Processng at Eti Aluminium
  12. Altmetric Badge
    Chapter 11 Bauxite Residue Management
  13. Altmetric Badge
    Chapter 12 Tests with New Flocculant for Red Mud Decanting in Alunorte
  14. Altmetric Badge
    Chapter 13 Red Mud Filtration Test Results using AFP IV™ Automatic Filter Press
  15. Altmetric Badge
    Chapter 14 Study on Dry-Method Volume Expansion Technology for Wet Red Mud Yard
  16. Altmetric Badge
    Chapter 15 Eti Aluminum Red Mud Characterization and Processing
  17. Altmetric Badge
    Chapter 16 Studies on Metal Flow from Khondalite to Bauxite to Alumina and Rejects from an Alumina Refinery, India
  18. Altmetric Badge
    Chapter 17 Directions for Large Scale Utilization of Bauxite Residue
  19. Altmetric Badge
    Chapter 18 Production of Pig Iron from Nalco Redmud by Application of Plasma Smelting Technology
  20. Altmetric Badge
    Chapter 19 Growth and agglomeration of boehmite in sodium aluminate solutions
  21. Altmetric Badge
    Chapter 20 Physical Simulation on Mixing Uniformity in Seed Precipitation Tank
  22. Altmetric Badge
    Chapter 21 Kinetics of Boehmite Precipitation from Supersaturated Sodium Aluminate Solutions with Ethanol-Water Solvent
  23. Altmetric Badge
    Chapter 22 Effect of Crystal Growth Modifier on the Structure of Sodium Aluminate Liquors Analyzed by Raman Spectroscopy
  24. Altmetric Badge
    Chapter 23 Precipitation Area Upgrade at ETI Aluminum
  25. Altmetric Badge
    Chapter 24 Flash- and CFB Calciners, History and Difficulties of Development of Two Calcination Technologies
  26. Altmetric Badge
    Chapter 25 A Specific Critical Analysis on the Life Time of Alumina Calciners Refractories
  27. Altmetric Badge
    Chapter 26 The Key Technologies for Energy Efficient Al(OH) 3 Dilute Phase Fluidized Bed Roasting Furnaces
  28. Altmetric Badge
    Chapter 27 Fabric Filter Operating Results with 10 m Long Bags and Low Purging Pressures
  29. Altmetric Badge
    Chapter 28 Optimization of Preparation for α-Alumina by Calcination from Alumninum Hydroxide Using Response Surface Methodology
  30. Altmetric Badge
    Chapter 29 Customer Impacts of Na 2 O and CaO in Smelter Grade Alumina
  31. Altmetric Badge
    Chapter 30 Options for Joint Ventures
  32. Altmetric Badge
    Chapter 31 Decrease of Heat Consumption at Nepheline Processing to Alumina and By-Products
  33. Altmetric Badge
    Chapter 32 Influence of Sodium Oxide on Phase Composition and Self-Powder and Alumina Leaching Properties of Calcium Aluminate Slag
  34. Altmetric Badge
    Chapter 33 Influence of Titania on Phase Composition and Self-Powder and Alumina Leaching Properties of Calcium Aluminate Slag
  35. Altmetric Badge
    Chapter 34 Effect of Combined Forms of Al and Si on the Acid Leaching Performance of Fly Ash
  36. Altmetric Badge
    Chapter 35 Study on the effect of Si and silicide on leaching Al 2 O 3 from magnesium smelting reduction slag
  37. Altmetric Badge
    Chapter 36 Extracting Alumina from Coal Fly Ash Using Acid Sintering-Leaching Process
  38. Altmetric Badge
    Chapter 37 Production of Novel Zeolite of Type Na-P From Sodium Aluminate Liquor/Spent Liquor/Alumina Tri-Hydrate of Nalco’s Alumina Refinery, Damanjodi, Orissa, India: A Unique Material for Detergent Formulation
  39. Altmetric Badge
    Chapter 38 Extracting Alumina from Coal Fly Ash with Ammonium Sulfate Sintering Process
  40. Altmetric Badge
    Chapter 39 Study on Absorption of Low-Concentration SO 2 with Basic Slag Intensified by Ultrasonic Wave
  41. Altmetric Badge
    Chapter 40 Acid Cleaning of Titanium Based Scales Formed on Preheaters in the Bayer Process
  42. Altmetric Badge
    Chapter 41 Comparision of the Micro Structure and Texture Evolution in AA1050 Aluminum Alloy Sheets Produced by the DC and CC Methods
  43. Altmetric Badge
    Chapter 42 Study on Mechanical Properties of 2024 Al Sheet Treated by Smat and Hot/Cold Rolling
  44. Altmetric Badge
    Chapter 43 Effects of Asymmetrical Roll Bonding on Microstructure, Chemical Phases and Property of Copper/Aluminum Clad Sheet
  45. Altmetric Badge
    Chapter 44 From Molten Metal to 3.2 mm Wire for Mechanical Applications
  46. Altmetric Badge
    Chapter 45 Finite element simulation analysis of the ultrasonic vibration forging of an aluminum cylinder workpiece
  47. Altmetric Badge
    Chapter 46 Refinement of Fe-Intermetallic Compounds by Caliber Rolling Process of AL-MG-SI-FE Alloys
  48. Altmetric Badge
    Chapter 47 Analytical and Fem Modeling of Aluminum Billet Induction Heating with Experimental Verification
  49. Altmetric Badge
    Chapter 48 The Evolution of Mechanical Properties and Microstructure in Early Stages of Natural Ageing on 2024 Plates
  50. Altmetric Badge
    Chapter 49 An In-Situ Technique for Preparing Al-TiB 2 and Al-Al 3 Ti Composites
  51. Altmetric Badge
    Chapter 50 The Development and Validation of a New Thermodynamic Database for Aluminum Alloys
  52. Altmetric Badge
    Chapter 51 Effect of Solid Particles on Fluidity of Semisolid Aluminum Alloy Slurry
  53. Altmetric Badge
    Chapter 52 Precipitation of the θ′(Al2Cu) phase in Al-Cu-Ag alloys
  54. Altmetric Badge
    Chapter 53 Near Net Shaped Casting of 7050 Al Wrought Alloy by CDS Process: Microstructure and Mechanical Properties
  55. Altmetric Badge
    Chapter 54 Effects of Cu, Mg, and Sr Additions on the Mechanical Properties and Machinability of Near-Eutectic Al-11%S Casting Alloys
  56. Altmetric Badge
    Chapter 55 Evolution of Iron based intermetallic Phases in Al-7wt%Si hypoeutectic alloy
  57. Altmetric Badge
    Chapter 56 A New Approach to Producing Large-Size AA7055 Aluminum Alloy Ingots
  58. Altmetric Badge
    Chapter 57 Thermal Analysis and Microstructures of Modified Grain-Refined Al-7Si-Mg Cast Alloy
  59. Altmetric Badge
    Chapter 58 Effect of Solidification Velocity and Hydrogen Content on Porosity in Directionally Solidified A356 Castings
  60. Altmetric Badge
    Chapter 59 Grain Refiner for Aluminium-Silicon Sand Casting Aloys
  61. Altmetric Badge
    Chapter 60 Neutron Diffraction Analysis of Phase Precipitation in Solidification of Hypereutectic Al-Si Alloys with the Addition of Cu and Mg
  62. Altmetric Badge
    Chapter 61 Refinement of Primary and Eutectic Silicon Phases in Shape Casting of Hyper-Eutectic Al-Si Alloys
  63. Altmetric Badge
    Chapter 62 Analysis of Thermal and Structural Parameters and Microhardess Variations in Different Al-Cu Alloys Directionally Solidified
  64. Altmetric Badge
    Chapter 63 Modeling of as-cast A356 for coupled explicit finite element analysis
  65. Altmetric Badge
    Chapter 64 Observation of Structure Evolution During Annealing of 7xxx Series Al Deformed at High Temperature
  66. Altmetric Badge
    Chapter 65 Study of Homogenization Treatments of Cast 5xxx Series Al-Mg-Mn Alloy Modified with Zn
  67. Altmetric Badge
    Chapter 66 Microstructure evolution of 7003 Al alloy by equal channel angular extrusion process
  68. Altmetric Badge
    Chapter 67 Increasing mechanical properties of AA6082 by optimizing chemical compositions and processing parameters during extrusion
  69. Altmetric Badge
    Chapter 68 Effect of Strain Rate on the Microstructural Development in DC Cast Al-15Si Alloy
  70. Altmetric Badge
    Chapter 69 Influence of High-Pressure Torsion on Mechanical Properties and Microstructural Evolution in 2197 Al-Li Alloy
  71. Altmetric Badge
    Chapter 70 The Role of Co-Clusters in the Artificial Aging of AA6061 and AA6060
  72. Altmetric Badge
    Chapter 71 Influence of Elastic Stress on Age Hardening of 7075 Aluminum Alloy
  73. Altmetric Badge
    Chapter 72 Influence of Mn in Solid Solution in Softening of AA3003 Alloy During Annealing
  74. Altmetric Badge
    Chapter 73 The Influence of Solution Treatment on the High-Temperature Strength of Al-Si Foundry Alloys with Ni
  75. Altmetric Badge
    Chapter 74 The Effect of Artificial Aging Treatment on Microstructure and Tensile Properties of Al-12.7Si-0.7Mg Alloy
  76. Altmetric Badge
    Chapter 75 Studies on Flow Characteristics at High-Pressure Die-Casting
  77. Altmetric Badge
    Chapter 76 Electrohydraulic Sheet Metal Forming of Aluminum Panels
  78. Altmetric Badge
    Chapter 77 Metallurgical Characterization of Aluminum Alloys by Matrix Dissolution
  79. Altmetric Badge
    Chapter 78 Effect of Silicon Particles on the Tensile Properties of Heat Resistant Al-Si-Cu-Ni-Mg Alloy Pertaining to Different Tensile Temperature
  80. Altmetric Badge
    Chapter 79 Factors Influencing Tensile Mechanical Properties of Al-7Si-Mg Casting Alloys A356/7
  81. Altmetric Badge
    Chapter 80 Effect of tool rotational speed on the microstructures and tensile properties of 7075 aluminum alloy via Friction Stir Process (FSP)
  82. Altmetric Badge
    Chapter 81 Improving Microstructure of AISI H13 Extruding Dies Using Ion Nitriding
  83. Altmetric Badge
    Chapter 82 Influence of Titanium-Boron Additions on Grain Refinement of AA2219 Gas Tungsten Arc Welds
  84. Altmetric Badge
    Chapter 83 Linear Friction Welding of a 2024 Al Alloy: Microstructural, Tensile and Fatigue Properties
  85. Altmetric Badge
    Chapter 84 The Effect Of Friction Stir Welding on the Microstructure and Tensile Properties of Al 2139-T8 Alloys
  86. Altmetric Badge
    Chapter 85 Friction Stir Welding of Al- Zn- Mg Alloy AA7039
  87. Altmetric Badge
    Chapter 86 Post Weld Heat Treatment of Friction Stir Welded AA2017
  88. Altmetric Badge
    Chapter 87 Energy Absorption of Aluminum Foam-Filled Tubes Under Quasi-Static Axial Loading
  89. Altmetric Badge
    Chapter 88 Optimization of Process Parameters of Preparing Foamed Al-Si Alloy Based on Ga-Based BP Neural Network
  90. Altmetric Badge
    Chapter 89 A Study of Microstructural Stability of Friction Stir Welded Joints of Al-Mg Alloys during Subsequent Thermal Exposure
  91. Altmetric Badge
    Chapter 90 Characterization of the Compressive Behaviour of an Al Foam by X-Ray Computerized Tomography
  92. Altmetric Badge
    Chapter 91 Development of Low-Cost Video Emissions Monitoring Technique for Aluminum Smelting Applications
  93. Altmetric Badge
    Chapter 92 Electrolytic Cell Gas Cooling Upstream of Treatment Center
  94. Altmetric Badge
    Chapter 93 Jet Induced Boosted Suction System for Roof Vent Emission Control: New Developments and Outlooks
  95. Altmetric Badge
    Chapter 94 HF Emission Reduction from Anode Butts Using Covered Trays
  96. Altmetric Badge
    Chapter 95 Research and Application of Energy Saving Technology for Aluminum Reduction in China
  97. Altmetric Badge
    Chapter 96 Low Energy Cell Development on AP Technology ™
  98. Altmetric Badge
    Chapter 97 Review on the Energy Saving Technologies Applied in Chinese Aluminum Reduction Industry
  99. Altmetric Badge
    Chapter 98 Numerical Simulation on Coupled Multi-Field of the Perforated Anode in Aluminium Reduction Cells under Low Carbon Operation
  100. Altmetric Badge
    Chapter 99 Improved Energy Management During Anode Setting Activity
  101. Altmetric Badge
    Chapter 100 The Transition Strategy at Alouette Towards Higher Productivity with a Lower Energy Consumption
  102. Altmetric Badge
    Chapter 101 Experimental Studies of the Impact of Anode Pre-heating
  103. Altmetric Badge
    Chapter 102 Depth Analysis and Potentiality Exploitation on Energy-Saving and Consumption-Reduction of Aluminum Reduction Pot
  104. Altmetric Badge
    Chapter 103 Development and Application of SAMI’s Low Voltage Energy-Saving Technology
  105. Altmetric Badge
    Chapter 104 Twin air compressor for energy saving and back up capability
  106. Altmetric Badge
    Chapter 105 Latest Results from PFC Investigation in China
  107. Altmetric Badge
    Chapter 106 Studies of Perfluorocarbon Formation on Anodes in Cryolite Melts
  108. Altmetric Badge
    Chapter 107 Characteristics of in Situ Alumina Pid Ore Feed Control
  109. Altmetric Badge
    Chapter 108 Towards On-line Monitoring of Alumina Properties at a Pot Level
  110. Altmetric Badge
    Chapter 109 Controlling the Variability of Pots KPVs: The Variability Matrix
  111. Altmetric Badge
    Chapter 110 Multivariate Statistical Investigation of Carbon Consumption for HSS Reduction Cell
  112. Altmetric Badge
    Chapter 111 Experiences with Alstom’s new Alfeed system at Emal
  113. Altmetric Badge
    Chapter 112 Computer Algorithm to Predict Anode Effect Events
  114. Altmetric Badge
    Chapter 113 Influence of the Sulphur Content in the Carbon Anodes in Aluminium Electrolysis — a Laboratory Study
  115. Altmetric Badge
    Chapter 114 Concentration Gradients of Individual Anion Species in the Cathode Boundary Layer of Aluminium Reduction Cells
  116. Altmetric Badge
    Chapter 115 Electrochemical Behaviour of Carbon Anodes in Na 3 AlF 6 -K 3 AlF 6 -Based Low-Melting Electrolytes for Aluminium Electrolysis
  117. Altmetric Badge
    Chapter 116 Operating Parameters of Aluminum Electrolysis in a KF-AlF3 BASED Electrolyte
  118. Altmetric Badge
    Chapter 117 Effect of KF Additions in NA 3 ALF 6 -AL 2 O 3 Electrolytes on Expansion of Cathode Blocks
  119. Altmetric Badge
    Chapter 118 Preparing Aluminium-Scandium Inter-Alloys During Reduction Process in KF-ALF 3 -SC 2 O 3 MELTS
  120. Altmetric Badge
    Chapter 119 Liquidus Temperatures of the System Na 3 AlF 6 -K 3 AlF 6 -AlF 3
  121. Altmetric Badge
    Chapter 120 DX+, An Optimized Version of DX Technology
  122. Altmetric Badge
    Chapter 121 AP40: the latest of the AP Technology™ solutions
  123. Altmetric Badge
    Chapter 122 A Techno-Economic Optimization Model for Aluminium Electrolysis Production
  124. Altmetric Badge
    Chapter 123 The Successful Implementation of Dubal DX Technology at Emal
  125. Altmetric Badge
    Chapter 124 Commissioning of Emirates Aluminium Smelter Potlines
  126. Altmetric Badge
    Chapter 125 Update on the Development of D18 Cell Technology at Dubal
  127. Altmetric Badge
    Chapter 126 Prebake Potline Restart after Power Supply Interruption
  128. Altmetric Badge
    Chapter 127 The Restart of Two Idled Pot Lines at Ormet Primary Aluminum
  129. Altmetric Badge
    Chapter 128 Vertical Stud Søderberg Technology Development by UC Rusal in 2004–2010 (Part 1)
  130. Altmetric Badge
    Chapter 129 Vertical Stud Søderberg Technology Development by UC Rusal in 2004 – 2010 (Part 2 — Eco-Søderberg Technology)
  131. Altmetric Badge
    Chapter 130 Uniform Cathode Current Collection / Distribution Effect on Cell Stability (Nine Months of Continuous Treatment of a Sick Cell)
  132. Altmetric Badge
    Chapter 131 Cryoscopic Data for Hall-Héroult Bath Containing Magnesium Fluoride, Calcium Fluoride, Potassium Cryolite, and Sodium Chloride
  133. Altmetric Badge
    Chapter 132 Potentiometric Fluoride Analysis with Improved Analytical Performance
  134. Altmetric Badge
    Chapter 133 Mechanism of Transport Between the Anode-Bath Interface and the Active Bubble Generation Sites in Hall-Héroult Cells
  135. Altmetric Badge
    Chapter 134 Depolarized Gas Anodes for Electrowinning of Aluminium From Cryolite-Alumina Melts in a Laboratory Cell
  136. Altmetric Badge
    Chapter 135 Reduction of the Operating Temperature of Aluminum Electrolysis: Low Temperature Electrolyte
  137. Altmetric Badge
    Chapter 136 Specific Molecular Features of Potassium-Containing Cryolite Melts
  138. Altmetric Badge
    Chapter 137 Aluminum Flouride Purity Test by Different Techniques
  139. Altmetric Badge
    Chapter 138 Micro-Raman Spectra Research on NaF-AlF 3 -NaCl Melts
  140. Altmetric Badge
    Chapter 139 GHG Measurement and Inventory for Aluminum Production
  141. Altmetric Badge
    Chapter 140 Optimization and CFD Simulation in the Ventilation of AP60 Reduction Cell Buildings
  142. Altmetric Badge
    Chapter 141 HEX Retrofit Enables Smelter Capacity Expansion
  143. Altmetric Badge
    Chapter 142 Experimental and Theoretical Study on the Fluidization of Alumina Fluoride Used in the Aluminum Smelter Processes
  144. Altmetric Badge
    Chapter 143 A Method for Comparing the HF Formation Potential of Aluminas with Different Water Contents
  145. Altmetric Badge
    Chapter 144 Visualising the Sources of Potroom Dust in Aluminium Smelters
  146. Altmetric Badge
    Chapter 145 Impurity Elements in Raw Gas Ultra-Fines from Aluminium Electrolysis Cells
  147. Altmetric Badge
    Chapter 146 Current Distribution and Lorentz Field Modelling Using Cathode Designs: A Parametric Approach
  148. Altmetric Badge
    Chapter 147 Electromagnetic and MHD Study to Improve Cell Performance of an End-to-End 86 KA Potline
  149. Altmetric Badge
    Chapter 148 Study on the Influences of Potline Status on the Magnetic Fields of Aluminum Reduction cells
  150. Altmetric Badge
    Chapter 149 Modeling of Interface of Electrolyte/Aluminum Melt in Aluminum Reduction Cell with Novel Cathode Structure
  151. Altmetric Badge
    Chapter 150 The Use of Vortex Method in the Analysis of Multiphase Flow in Aluminum Reduction Cells
  152. Altmetric Badge
    Chapter 151 Anodic Bubble Behaviour in Hall-Héroult Cells
  153. Altmetric Badge
    Chapter 152 Numerical Investigation of Bubble Dynamics in Aluminium Electrolytic Cells
  154. Altmetric Badge
    Chapter 153 Integrated Desalination and Primary Aluminium Production
  155. Altmetric Badge
    Chapter 154 Study of Busbar Displacement of Aluminum Reduction Cells
  156. Altmetric Badge
    Chapter 155 Impact of Amperage Creep on Potroom Busbars: Thermal-Mechanical Aspects
  157. Altmetric Badge
    Chapter 156 Effective insulation control monitoring system: the CANDI™ solution for a safer production
  158. Altmetric Badge
    Chapter 157 Maximize efficiency and safety of smelters through advanced multipurpose simulator solutions
  159. Altmetric Badge
    Chapter 158 Potline Open Circuit Protection
  160. Altmetric Badge
    Chapter 159 Simulating traffic in a potroom, can this bring real cost savings?
  161. Altmetric Badge
    Chapter 160 Modeling Cathode Cooling Due to Power Interruption
  162. Altmetric Badge
    Chapter 161 Modeling the Mass and Energy Balance of Different Aluminium Smelting Cell Technologies
  163. Altmetric Badge
    Chapter 162 Current Efficiency Predictive Model and Its Calibration and Validation
  164. Altmetric Badge
    Chapter 163 Wireless and Non-Contacting Measurement of Individual Anode Currents in Hall-Héroult Pots; Experience and Benefits
  165. Altmetric Badge
    Chapter 164 Impacts of Anode Set on the Energy Re-distribution of PB Aluminum Smelting Cells
  166. Altmetric Badge
    Chapter 165 Dimensional Analysis in Cold Water Model Experiments of New Cathode Structure Aluminum Cell
  167. Altmetric Badge
    Chapter 166 Flow Field Comparison Between Traditional Cell and New Structure Cell by Chaclo by CFD Method
  168. Altmetric Badge
    Chapter 167 Effect of Grain Refiner Amount on the Hot Tearing of 6xxx Alloys During DC Casting
  169. Altmetric Badge
    Chapter 168 Grain Refining of Pure Aluminum
  170. Altmetric Badge
    Chapter 169 Study on the Microstructure Changes of Hypereutectic Aluminum Casting Alloy Using Ultrasonic Vibration Process
  171. Altmetric Badge
    Chapter 170 A Mathematical Model and Computer Simulations for Predicting the Response of Aluminum Casting Alloys to Heat Treatment
  172. Altmetric Badge
    Chapter 171 Understanding and Improving Chemical Capability in the Casthouse
  173. Altmetric Badge
    Chapter 172 Effect of water content of frozen mold on fluidity of aluminum alloy
  174. Altmetric Badge
    Chapter 173 Simulation Tools to Complement Cast House Design and Daily Operation
  175. Altmetric Badge
    Chapter 174 Formation of Microstructure in Al-Si Alloys Under Ultrasonic Melt Treatment
  176. Altmetric Badge
    Chapter 175 Automated Measurement of Liquid Metal Heel and Full Furnace Weight in Tilting Furnaces
  177. Altmetric Badge
    Chapter 176 Development of a New Generation Electromagnetic Metal Moving System
  178. Altmetric Badge
    Chapter 177 Six Years Experience from Low-Temperature Oxyfuel in Primary and Re-Melting Aluminium Cast Houses
  179. Altmetric Badge
    Chapter 178 Energy and Maintenance Cost Savings Review at Several Us Aluminum die Cast Manufacturers Using Unique, Non-Wetting, Micro-Porous Refractory Products
  180. Altmetric Badge
    Chapter 179 Quality Comparison between Molten Metal from Remelted Sheets; Mill Finish and Coated
  181. Altmetric Badge
    Chapter 180 Numerical Modeling of Oxy-Fuel and Air-Fuel Burners for Aluminium Melting
  182. Altmetric Badge
    Chapter 181 A New Approach to Identify Aluminum Dross Reduction Opportunities Using an Integrated Weighing System
  183. Altmetric Badge
    Chapter 182 Statistical Analysis of Dross Data for Hydro Aluminium Casthouses
  184. Altmetric Badge
    Chapter 183 Wettability of Aluminium with Aluminium Carbide (Graphite) in Aluminium Filtration
  185. Altmetric Badge
    Chapter 184 A New Fused Magnesium Chloride Containing Refining Flux Based on a Ternary System
  186. Altmetric Badge
    Chapter 185 High Frequency Electromagnetic Separation of Inclusions from Aluminum
  187. Altmetric Badge
    Chapter 186 Measurement of Non-Metallic Inclusions in the Size Range of 10–20μm by LiMCA
  188. Altmetric Badge
    Chapter 187 Relationship between the Permeability of the Porous Disk Filter and the Filtrate Weight — Time Curves Generated with the PoDFA / Prefil® Footprinter Method
  189. Altmetric Badge
    Chapter 188 Study of Ni-Impurity Removal from Al Melt
  190. Altmetric Badge
    Chapter 189 Improving Strip Surface Quality of AA6111 alloy using Different Casting Atmospheres for the Horizontal Single Belt Strip Casting (HSBC) Process
  191. Altmetric Badge
    Chapter 190 Influence of Direct Chill Casting Process Variables on Surface Quality of Aluminum Alloy Sheet Ingots
  192. Altmetric Badge
    Chapter 191 Square rolling slabs from start of casting — the elimination of butt swell
  193. Altmetric Badge
    Chapter 192 Residual Stresses in As-Cast Billets: Neutron Diffraction Measurement and Thermomechanical Modeling
  194. Altmetric Badge
    Chapter 193 Can the Aluminium Industry Learn from Another Industry’s Catastrophe?
  195. Altmetric Badge
    Chapter 194 Deformation Behaviors of Pure Al and Al-4.5mass%Cu Alloy in Semi-Solid State
  196. Altmetric Badge
    Chapter 195 Chemical Additions to Reduce Hot Tearing in the Cast House
  197. Altmetric Badge
    Chapter 196 Adaptive Fuzzy Controller for Ball Mill in Anode Plant
  198. Altmetric Badge
    Chapter 197 Use of Under Calcined Coke to Produce Baked Anodes for Aluminium Reduction Lines
  199. Altmetric Badge
    Chapter 198 60 TPH Single Line Green Anode Plant Commissioned at Qatalum
  200. Altmetric Badge
    Chapter 199 Improvement of Anode Paste Quality and Performance of Alcoa Lista
  201. Altmetric Badge
    Chapter 200 Baked Anode Quality Improvement Through Optimization of Green Anode Plant Ultra Fine Content in Ball Mill Product and Process Parameters
  202. Altmetric Badge
    Chapter 201 Baked Anode Quality Improvement Through Optimization of Green Anode Processing
  203. Altmetric Badge
    Chapter 202 Anode Quality and Bake Furnace Performance of Emal
  204. Altmetric Badge
    Chapter 203 Experiences in FTC Design, Operation and Development
  205. Altmetric Badge
    Chapter 204 Boost of Anode Production at Voerde Aluminium by Advanced and Integrated Control Strategies
  206. Altmetric Badge
    Chapter 205 New Central Control System Architecture for Anode Baking Furnaces
  207. Altmetric Badge
    Chapter 206 Methods to Improve Fuel Utilization for Open Top Anode Baking Furnaces
  208. Altmetric Badge
    Chapter 207 Energy Saving Technologies for Anode Manufacturing
  209. Altmetric Badge
    Chapter 208 Evolution of Anode Grade Coke Quality
  210. Altmetric Badge
    Chapter 209 Studies on the Impact of Calcined Petroleum Coke from Different Sources on Anode Quality
  211. Altmetric Badge
    Chapter 210 Prebaked Anode from Coal Extract (3) — Carbonization Properties of Hypercoal and Its Blends with Binder Pitch
  212. Altmetric Badge
    Chapter 211 Importance of Primary Quinoline Insoluble in Binder Pitch for Anode
  213. Altmetric Badge
    Chapter 212 Investigation on Air Reactivity and Electrolysis Consumption of Anode Carbons with Anthracite Additions
  214. Altmetric Badge
    Chapter 213 Experiences on Anode Reconstruction Process in Søderberg Technology
  215. Altmetric Badge
    Chapter 214 Cathode performance evaluation at Votorantim Metais — CBA
  216. Altmetric Badge
    Chapter 215 Green, Safe and Clean Carbon Products for the Aluminium Electrolysis Pots
  217. Altmetric Badge
    Chapter 216 A New Material for Collector Bar Sealing — LRM2
  218. Altmetric Badge
    Chapter 217 Dry Barrier Mix in Reduction Cell Cathodes
  219. Altmetric Badge
    Chapter 218 Improving the Precision and Productivity of Green Coke Volatile Matter Analysis
  220. Altmetric Badge
    Chapter 219 Discrete Element Method Applied to the Vibration Process of Coke Particles
  221. Altmetric Badge
    Chapter 220 Vibrated Bulk Density using Semi-automated Device: Simplifying Sample Preparation while Improving Accuracy and Precision
  222. Altmetric Badge
    Chapter 221 Characterization of Pre-Baked Carbon Anode Samples Using X-Ray Computed Tomography and Porosity Estimation
  223. Altmetric Badge
    Chapter 222 Diagnosing Anode Quality Problems Using Optical Macroscopy
  224. Altmetric Badge
    Chapter 223 Properties and Production Conditions Affecting Crack Formation and Propagation in Carbon Anodes
  225. Altmetric Badge
    Chapter 224 New Method for Representative Measurement of Anode Electrical Resistance
  226. Altmetric Badge
    Chapter 225 Increasing Coke Impurities — Is this Really a Problem for Metal Quality?
  227. Altmetric Badge
    Chapter 226 Aluminum Electrolysis Anti-Oxidation Coating Carbon Anode
  228. Altmetric Badge
    Chapter 227 Spent Potlining: an Update
  229. Altmetric Badge
    Chapter 228 Analysis of Porous Structures of Graphitic Cathode Materials and the Correlation to Penetrated Sodium
  230. Altmetric Badge
    Chapter 229 Characterization of Carbon Cathode Materials by X-Ray Microtomography
  231. Altmetric Badge
    Chapter 230 New Observations in Creep Behaviour of Ramming Paste in Aluminium Electrolysis Cell
  232. Altmetric Badge
    Chapter 231 Wetting of KF-ALF 3 -Based Melts on Graphite Cathode Materials for Aluminum Electrolysis
  233. Altmetric Badge
    Chapter 232 Fundamentals of Aluminium Carbide Formation
  234. Altmetric Badge
    Chapter 233 Investigation of the Cathode Wear Mechanism in a Laboratory Test Cell
  235. Altmetric Badge
    Chapter 234 Study on Graphitization of Cathode Carbon Blocks for Aluminum Electrolysis
  236. Altmetric Badge
    Chapter 235 Electrolysis Expansion Performance of Modified Pitch Based TiB 2 -C Composite Cathode in [K 3 AlF 6 /Na 3 AlF 6 ]-AlF 3 -Al 2 O 3 Melts
  237. Altmetric Badge
    Chapter 236 Development of Technology for Producing a Wettable Coating on a Carbon Cathode by Electrodeposition
  238. Altmetric Badge
    Chapter 237 Pulse Electro-deposition of TiB 2 onto Graphite from TiO 2 -B 2 O 3 -KF-LiF Melts
  239. Altmetric Badge
    Chapter 238 Ball-Milled Cu-Ni-Fe-O Materials as Inert Anodes for Aluminum Electrolysis in Low-Temperature KF-AlF 3 Electrolyte
  240. Altmetric Badge
    Chapter 239 Effect of Nanopowder Content on Properties of NiFe 2 O 4 Matrix Inert Anode for Aluminum Electrolysis
  241. Altmetric Badge
    Chapter 240 Effect of MnO 2 Addition on Early-Stage Sintering Behavior and Properties of NiFe 2 O 4 Ceramics
  242. Altmetric Badge
    Chapter 241 Study on the Inert Anode for Al Electrolysis Based on the NiFe 2 O 4 Spinel Ceramics
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

policy
1 policy source
wikipedia
2 Wikipedia pages

Readers on

mendeley
169 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Light Metals 2012
Published by
Springer International Publishing, December 2016
DOI 10.1007/978-3-319-48179-1
ISBNs
978-3-31-948570-6, 978-3-31-948179-1
Editors

Suarez, Carlos E.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 169 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Mexico 1 <1%
United States 1 <1%
France 1 <1%
Unknown 166 98%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 48 28%
Student > Master 22 13%
Researcher 17 10%
Student > Bachelor 9 5%
Student > Doctoral Student 8 5%
Other 18 11%
Unknown 47 28%
Readers by discipline Count As %
Materials Science 45 27%
Engineering 40 24%
Chemistry 8 5%
Chemical Engineering 4 2%
Environmental Science 3 2%
Other 10 6%
Unknown 59 35%