↓ Skip to main content

Design and Modeling of Mechanical Systems—III

Overview of attention for book
Cover of 'Design and Modeling of Mechanical Systems—III'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Enhancing Efficiency of InGaN Nanowire Solar Cells by Applying Stress
  3. Altmetric Badge
    Chapter 2 Injection Fault Detection of a Diesel Engine by Vibration Analysis
  4. Altmetric Badge
    Chapter 3 A Nonlinear Analysis of a Flexible Unbalanced Cracked Rotor-Bearing System
  5. Altmetric Badge
    Chapter 4 Optimized Nonlinear MDOF Vibration Energy Harvester Based on Electromagnetic Coupling
  6. Altmetric Badge
    Chapter 5 Sub-hourly Validation of the Direct Normal Solar Irradiance Clear Sky Models
  7. Altmetric Badge
    Chapter 6 Microstructure and Mechanical Properties of Friction Stir Welded AA2024-T3 Joints
  8. Altmetric Badge
    Chapter 7 On the Elementary Wear Mechanisms of UD-GFRP Composites Using Single Indenter Scratch Test
  9. Altmetric Badge
    Chapter 8 Multiobjective Assembly Line Resource Assignment and Balancing Problem of Type 2
  10. Altmetric Badge
    Chapter 9 Dynamic Vibration of Vertical Axis Wind Turbine Geared Transmission System
  11. Altmetric Badge
    Chapter 10 Free Vibration of a Multi-span Road Bridge Supported by Point Elastic Supports
  12. Altmetric Badge
    Chapter 11 Modelization and Multimodel Control of Ship Electric Propulsion System
  13. Altmetric Badge
    Chapter 12 Strategy of Image Capture and Its Impact on Correspondence Error in Reconstructed 3D-Images-Based Point
  14. Altmetric Badge
    Chapter 13 Analytical and Numerical Approach for the Dynamic Behavior of a Beam Under a Moving Load
  15. Altmetric Badge
    Chapter 14 CFD Modeling of Wastewater Discharges in a Sewer System
  16. Altmetric Badge
    Chapter 15 Surrogate-Based Multidisciplinary Design Optimization for Stiffened Panels Application
  17. Altmetric Badge
    Chapter 16 Friction Compensation in a 2DOF Robot Manipulator
  18. Altmetric Badge
    Chapter 17 Anisotropic Elastic–Viscoplastic Modelling of a Quasi-unidirectional Flax Fibre-Reinforced Epoxy Subjected to Low-Velocity Impact
  19. Altmetric Badge
    Chapter 18 Dynamic Simulation of a Partial Unloaded Walking Within the Cable Driven Legs Trainer Using MATLAB SimMechanics
  20. Altmetric Badge
    Chapter 19 Hysteresis Identification Models: A Review
  21. Altmetric Badge
    Chapter 20 Static Behavior of Carbon Nanotubes Reinforced Functionally Graded Nanocomposite Cylindrical Panels
  22. Altmetric Badge
    Chapter 21 A Four-Node Shell Element for Geometrically Nonlinear Analysis of Thin FGM Plates and Shells
  23. Altmetric Badge
    Chapter 22 Post-buckling of FSDT of Functionally Graded Material Shell Structures
  24. Altmetric Badge
    Chapter 23 A New Cumulative Fatigue Damage Model for Short Glass Fiber-Reinforced Polyamide 66
  25. Altmetric Badge
    Chapter 24 Independent Loops Selection in a Hydraulic Looped Network
  26. Altmetric Badge
    Chapter 25 Canonical Variable Analysis for Fault Detection, System Identification and Performance Estimation
  27. Altmetric Badge
    Chapter 26 Effects of Using Flexible Die Instead of Flexible Punch in Rubber Pad Forming Process
  28. Altmetric Badge
    Chapter 27 On the Use of NC Milling and Turning Machines in SPIF Process of Asymmetric Parts: Numerical Investigation
  29. Altmetric Badge
    Chapter 28 Application of the Independent Component Analysis in the Estimation of the Road Disturbance Applied on a Nonlinear Suspension System
  30. Altmetric Badge
    Chapter 29 Contribution to the Evaluation of Uncertainties of Measurement to the Data Processing Sequence of a CMM
  31. Altmetric Badge
    Chapter 30 Integrated AHP-TOPSIS Approach for Pareto Optimal Solution Selection in Multi-site Supply Chain Planning
  32. Altmetric Badge
    Chapter 31 Reciprocating Compressor Prognostics
  33. Altmetric Badge
    Chapter 32 Dynamic Analysis of Bevel Gear in Presence of Local Damage in NonStationary Operating Conditions
  34. Altmetric Badge
    Chapter 33 Post-buckling Analysis of Functionally Graded Materials Structures with Enhanced Solid-Shell Elements
  35. Altmetric Badge
    Chapter 34 Reliability Analysis of Random Aerodynamic Torque of Horizontal Axis Wind Turbine
  36. Altmetric Badge
    Chapter 35 Topological Modeling of 2D Piezoelectric Truss Structure Using the MGS Language
  37. Altmetric Badge
    Chapter 36 Developing Mathematical Models of Stress Concentration Factor Using Response Surface Method
  38. Altmetric Badge
    Chapter 37 Porous Shape Memory Alloy: 3D Reconstitution and Numerical Simulation of Superelastic Behavior
  39. Altmetric Badge
    Chapter 38 Flexural Fatigue of Bio-Based Composites
  40. Altmetric Badge
    Chapter 39 Mode I Fracture Energy of One-Component Polyurethane Adhesive Joints as Function of Bond Thickness for the Automotive Industry
  41. Altmetric Badge
    Chapter 40 Scratch Resistance and Wear Energy Analysis of TiO2 Coatings on 316L Stainless Steel
  42. Altmetric Badge
    Chapter 41 Analysis of Double Reducer Stage Using Substructuring Method
  43. Altmetric Badge
    Chapter 42 Numerical Study of Water Waves Impact on Offshore Structure
  44. Altmetric Badge
    Chapter 43 Comparative Investigation of Turbulence Modeling in Counterflowing Jet Predictions
  45. Altmetric Badge
    Chapter 44 Structural Sources Localization in 2D Plate Using an Energetic Approach
  46. Altmetric Badge
    Chapter 45 A CAD Assembly Management Model: Mates Reconciliation and Change Propagation
  47. Altmetric Badge
    Chapter 46 Mechanical Performance of Doum Palm Fiber-Reinforced Plater Mortars
  48. Altmetric Badge
    Chapter 47 Experimental and Analytical Analysis of Particle Damping
  49. Altmetric Badge
    Chapter 48 Seeded Planetary Bearing Fault in a Helicopter Gearbox—A Case Study
  50. Altmetric Badge
    Chapter 49 Study of the Anti-fingerprint Function: Effect of Some Texture Properties on the Finger Contact Area
  51. Altmetric Badge
    Chapter 50 Online Identification of Road Profile Variation Using a Constant Piecewise Function
  52. Altmetric Badge
    Chapter 51 Cathodic Protection System by Imposed Current for a Vedette
  53. Altmetric Badge
    Chapter 52 Vibration Analysis of a Nonlinear Drivetrain System in the Presence of Acyclism
  54. Altmetric Badge
    Chapter 53 Calibration and Correction of the Beam Solar Radiation Models Using High Temporal Resolution Measurements
  55. Altmetric Badge
    Chapter 54 Collapse Analysis of Longitudinally Cracked HDPE Pipes
  56. Altmetric Badge
    Chapter 55 Cutting Modeling of Ti6Al4V Alloy When Using a TiAlN-Coated Insert
  57. Altmetric Badge
    Chapter 56 Turbulent-Heated Plane Compressible Jet Emerging in a Directed Co-Flowing Stream
  58. Altmetric Badge
    Chapter 57 Effects of Starting Time and Impeller Geometry on the Hydraulic Performance of a Centrifugal Pump
  59. Altmetric Badge
    Chapter 58 Effect of the Volute Diffuser Shape on Pressure Pulsations and Radial Force in Centrifugal Pumps
  60. Altmetric Badge
    Chapter 59 Multi-criteria Decision-Making Approaches for Facility Layout (FL) Evaluation and Selection: A Survey
  61. Altmetric Badge
    Chapter 60 Effect of the Radial Flow and Average Molecular Weight on the Surface Defect in PDMS Extrusion
  62. Altmetric Badge
    Chapter 61 DSC Investigation on Entropy and Enthalpy Changes in Ni-Rich NiTi Shape Memory Alloy at Various Cooling/Heating Rates
  63. Altmetric Badge
    Chapter 62 On the NiTi SMA Thermal Behavior at Various Heat Treatment Conditions
  64. Altmetric Badge
    Chapter 63 Multiobjective Constrained Optimization of Sewing Machine Mechatronic Performances
  65. Altmetric Badge
    Chapter 64 Numerical Study of a Gas Jet Impinging on a Liquid Surface
  66. Altmetric Badge
    Chapter 65 Modeling and Simulation of Transients in Natural Gas Pipelines
  67. Altmetric Badge
    Chapter 66 Damage Analysis of Flax Fibre/Elium Composite Under Static and Fatigue Testing
  68. Altmetric Badge
    Chapter 67 Measurement of Thermal Contact Resistance Across Cylinder Head Gasket
  69. Altmetric Badge
    Chapter 68 Ultra-Thin Films Effects on the Dynamic Behaviour of Three-Layer Laminated Plate
  70. Altmetric Badge
    Chapter 69 Assembly Sequence Generation Based on the CAD Model Simplification
  71. Altmetric Badge
    Chapter 70 In-Plane Strength Domain Numerical Determination of Hollow Concrete Block Masonry
  72. Altmetric Badge
    Chapter 71 Definition and Classification of Collaborative Network: MCDM Approaches for Partner Selection Problem
  73. Altmetric Badge
    Chapter 72 Supply Chain Risk Management, Conceptual Framework
  74. Altmetric Badge
    Chapter 73 Numerical Analysis of a Segmented Wind Turbine Blade Using the Substructure Method
  75. Altmetric Badge
    Chapter 74 Proposition of Eco-Feature: A New CAD/PLM Data Model for an LCA Tool
  76. Altmetric Badge
    Chapter 75 Effects of Pretextured Surface Topography on Friction and Wear of AA5083/AISI52100 Materials’ Pair
  77. Altmetric Badge
    Chapter 76 Solidworks—Matlab Coupling for Disassembly Plan Generation in a CAE Environment
  78. Altmetric Badge
    Chapter 77 Numerical Study of Wall Horizontal Turbulent Jet of Freshwater in a Homogeneous Co-flow Stream of Saltwater
  79. Altmetric Badge
    Chapter 78 Collaborative Inventory Management in Tunisian Healthcare Sector
  80. Altmetric Badge
    Chapter 79 On the Role of Activation Volume Parameter in Heterogeneous Deformation of Zr-Based Metallic Glasses
  81. Altmetric Badge
    Chapter 80 Inhomogeneous Wave Correlation for Propagation Parameters Identification in Presence of Uncertainties
  82. Altmetric Badge
    Chapter 81 Experimental and Numerical Study on Force Reduction in SPIF by Using Response Surface
  83. Altmetric Badge
    Chapter 82 Identification of Control Chart Deviations and Their Assignable Causes Using Artificial Neural Networks
  84. Altmetric Badge
    Chapter 83 Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production
  85. Altmetric Badge
    Chapter 84 High Strain-Rate Tensile Behaviour of Aluminium A6063
  86. Altmetric Badge
    Chapter 85 Pump Failure: Effect of Wall Elasticity on Pressure Fluctuations
  87. Altmetric Badge
    Chapter 86 Numerical Modeling of Hot Incremental Forming Process for Biomedical Application
  88. Altmetric Badge
    Chapter 87 A Polynomial Chaos Method for the Analysis of the Dynamic Response of a Gear Friction System
  89. Altmetric Badge
    Chapter 88 Sensitivity Analysis of Backlogging Cost in Multi-item Capacitated Lot-Sizing Problem
  90. Altmetric Badge
    Chapter 89 Effect of the Radial Flow on the Volume Defect in Polydimethylsiloxane Extrusion Using PIV the Technique
  91. Altmetric Badge
    Chapter 90 Tribological Behavior of HDPE Against Stainless Steel on the Presence of Bio-Lubricants
  92. Altmetric Badge
    Chapter 91 Collective Dynamics of Disordered Two Coupled Nonlinear Pendulums
  93. Altmetric Badge
    Chapter 92 Experimental Investigation on the Influence of Relative Density on the Compressive Behaviour of Metal Mesh Isolator
  94. Altmetric Badge
    Chapter 93 Anisotropic Study of Behavior of Titanium Alloy Thin Sheets Using Identification Strategy
  95. Altmetric Badge
    Chapter 94 Biomechanical Approach for the Development and Simulation of a Musculoskeletal Model of the Ankle
  96. Altmetric Badge
    Chapter 95 Cooling of Circuit Boards Using Natural Convection
  97. Altmetric Badge
    Chapter 96 Effect of Gravity of Carrier on the Dynamic Behavior of Planetary Gears
  98. Altmetric Badge
    Chapter 97 Prediction of the Position Error of the Uncertain 3-UPU TPM Using Interval Analysis
  99. Altmetric Badge
    Chapter 98 Influence of Stress Concentration Factor on the Evolution of the Strain Energy Release Rate at High Temperature in Highly Ductile Carbon Fibers Reinforced Thermoplastic Structures
  100. Altmetric Badge
    Chapter 99 Experimental and Numerical Study of Single Point Incremental Forming for a Spiral Toolpath Strategy
  101. Altmetric Badge
    Chapter 100 A Disassembly Sequence Planning Approach Based on Particle Swarm Optimization
  102. Altmetric Badge
    Chapter 101 HDPE Pipe Failure Analysis Under Overpressure in Presence of Defect
  103. Altmetric Badge
    Chapter 102 Plastic Behavior of 2024-T3 Under Uniaxial Shear Tests
  104. Altmetric Badge
    Chapter 103 Optimal Work-in-Process Control for a Closed Multistage Production System with Machine Preference
  105. Altmetric Badge
    Chapter 104 Brittle Fracture: Experimental and Numerical Modeling Using Phase-Field Approach
  106. Altmetric Badge
    Chapter 105 Mathematical Modeling of Surface Roughness in Electrical Discharge Machining Process Using Taguchi Method
  107. Altmetric Badge
    Chapter 106 Application of Set-based-approach for the Global Sizing of an Active Macpherson Suspension System
  108. Altmetric Badge
    Chapter 107 Vibration Suppression of a Cantilever Plate During Milling Using Passive Dynamic Absorber
  109. Altmetric Badge
    Chapter 108 Optimized Method for Computing Phase-Field Model Using Decoupling Scheme
  110. Altmetric Badge
    Chapter 109 Numerical Study of PCM Solidification in a Rectangular Modular Heat Exchanger
  111. Altmetric Badge
    Chapter 110 Hydrodynamic Behavior in Scraped Surface Heat Exchanger with Archimedes’ Screw
  112. Altmetric Badge
    Chapter 111 Numerical Investigation of Heat Transfer by Al2O3–Water Nanofluid in Square Cavity
  113. Altmetric Badge
    Chapter 112 Numerical Study of Geometric Parameters Effect on Rapid Heat Cycle Molding Process
  114. Altmetric Badge
    Chapter 113 Investigation of Parameters Affecting the Acoustic Absorption Coefficient of Industrial Liners
  115. Altmetric Badge
    Chapter 114 Investigation of Spatio-Temporal Behavior of Coolant During the RHCM Process
  116. Altmetric Badge
    Chapter 115 Engineering Change Management (ECM) Methods: Classification According to Their Dependency Models
  117. Altmetric Badge
    Chapter 116 Analytical Modeling and Analysis of a Bimorph Piezoelectric Energy Harvester
  118. Altmetric Badge
    Chapter 117 CFD Modeling of Air Pollution Dispersion in Complex Urban Area
  119. Altmetric Badge
    Chapter 118 Finite Element Modeling and Analysis of a Bimorph Piezoelectric Energy Harvester
  120. Altmetric Badge
    Chapter 119 Active Vibration Control of a Rotor Bearing System Using Piezoelectric Patch Actuators and an LQR Controller
  121. Altmetric Badge
    Chapter 120 New Modeling of Planetary Gear Transmission
  122. Altmetric Badge
    Chapter 121 Experimental Investigation of the Damage Progression in the Filament-Wound Composite by the Acoustic Emission Technique
  123. Altmetric Badge
    Chapter 122 Formulation of Bentonite-Cement Grout for Sealing Walls
  124. Altmetric Badge
    Chapter 123 Analytical Method for the Calculation of Tool Machine Energy Consumption
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

facebook
1 Facebook page

Citations

dimensions_citation
5 Dimensions

Readers on

mendeley
15 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Design and Modeling of Mechanical Systems—III
Published by
Springer, Cham, January 2017
DOI 10.1007/978-3-319-66697-6
ISBNs
978-3-31-966696-9, 978-3-31-966697-6
Editors

Mohamed Haddar, Fakher Chaari, Abdelmajid Benamara, Mnaouar Chouchane, Chafik Karra, Nizar Aifaoui

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 15 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 15 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 7 47%
Student > Doctoral Student 2 13%
Student > Master 2 13%
Unknown 4 27%
Readers by discipline Count As %
Engineering 6 40%
Computer Science 2 13%
Pharmacology, Toxicology and Pharmaceutical Science 1 7%
Unknown 6 40%