↓ Skip to main content

Mechatronics 2017

Overview of attention for book
Cover of 'Mechatronics 2017'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 A Compact Device for Urine Collection and Transport in Porous Media
  3. Altmetric Badge
    Chapter 2 Innovation of Pressing with TRIZ Methodology
  4. Altmetric Badge
    Chapter 3 Evaluation of Postural Stability During Quiet Standing Using MatLab Software and Promising Parameters
  5. Altmetric Badge
    Chapter 4 Comparison of Deformation and Stress States of the Total Trapeziometacarpal Replacement
  6. Altmetric Badge
    Chapter 5 Analysis of Single-Phase Voltage-Source Active Rectifier Under PWM
  7. Altmetric Badge
    Chapter 6 Minimization of Equivalent Series Resistance of Coupling Coils for Wireless Power Transfer Applications
  8. Altmetric Badge
    Chapter 7 Optimal Efficiency and Power Control of High Efficient Wireless Power Transfer System
  9. Altmetric Badge
    Chapter 8 Design of Consecutive Compensator for Servo System with Signal Uncertainty
  10. Altmetric Badge
    Chapter 9 Multi-criteria Decision-Making Problems in Cutting Tool Wear Evaluation
  11. Altmetric Badge
    Chapter 10 The Novel Device for Irreversible Electroporation: Thermographic Comparison with Radiofrequency Ablation
  12. Altmetric Badge
    Chapter 11 High-Voltage Pulse Source for Cell Electroporation
  13. Altmetric Badge
    Chapter 12 Valve for Testing Rocket Engines
  14. Altmetric Badge
    Chapter 13 System Approach to the Mass Production Improvement
  15. Altmetric Badge
    Chapter 14 An Automatic PCI Assignment Framework for Femtocells in LTE Networks
  16. Altmetric Badge
    Chapter 15 Classical Interpretation of Ultra-Low Intensity Optical Heterodyning as a Pragmatic Approach to Photon Size Determination
  17. Altmetric Badge
    Chapter 16 Numerical Integrator System for Drift Compensated Fluxmeter
  18. Altmetric Badge
    Chapter 17 Investigation of Magnetic Properties of Amorphous Fe-Based Alloy Magnetized in Rayleigh Region
  19. Altmetric Badge
    Chapter 18 Cutting Insert Wear Analysis Using Industry 4.0
  20. Altmetric Badge
    Chapter 19 Analysis of Machinability of Pure-Cobalt Disc for Magnetron Deposition Using WEDM
  21. Altmetric Badge
    Chapter 20 Using Industry 4.0 Technologies for Teaching and Learning in Education Process
  22. Altmetric Badge
    Chapter 21 Mth Root Mth Power SNR MPSK Estimator
  23. Altmetric Badge
    Chapter 22 Increasing the Efficiency of Induction Generator in Small Hydro Power Plant for Varying River Flow Rate
  24. Altmetric Badge
    Chapter 23 Volume Minimization of Power Pulse Transformer for a Two-Switch Forward Converter
  25. Altmetric Badge
    Chapter 24 Efficiency Mapping of a Small Permanent Magnet Synchronous Motor
  26. Altmetric Badge
    Chapter 25 Dynamic Model of Wye Connected Induction Machine
  27. Altmetric Badge
    Chapter 26 Induction Machine Models and Equivalent Circuits Based on Hybrid Parameters of Two-Port Network
  28. Altmetric Badge
    Chapter 27 Push–Pull Converter Transformer Maximum Efficiency Optimization
  29. Altmetric Badge
    Chapter 28 Synchronous Machine Model Including Damper
  30. Altmetric Badge
    Chapter 29 Reduction of Pulsating Torque of the Synchronous Motor Using Magnetic Wedges
  31. Altmetric Badge
    Chapter 30 Calculation of a Lap Winding Coil Geometry
  32. Altmetric Badge
    Chapter 31 Equivalent Magnetic Circuit Method Usage in the Synchronous Reluctance Machine Rotor Design
  33. Altmetric Badge
    Chapter 32 Analysis of Rotor Ventilation System of Air Cooled Synchronous Machine Through Computational Fluid Dynamics
  34. Altmetric Badge
    Chapter 33 High-Speed Electrical Machines: Review of Concepts and Currently Used Solutions with Synchronous Machines with Permanent Magnets
  35. Altmetric Badge
    Chapter 34 Control and Design of a High Power Density PMSM
  36. Altmetric Badge
    Chapter 35 Magnetic Measurements of Solid Material
  37. Altmetric Badge
    Chapter 36 Identification of Induction Machine Electromagnetic Parameters for a Wide Range of Frequency and Flux Density
  38. Altmetric Badge
    Chapter 37 Modification of Frame for Synchronous Machine with Permanent Magnet
  39. Altmetric Badge
    Chapter 38 Mechatronic System with a Turbo-Generator of Two Different Frequencies
  40. Altmetric Badge
    Chapter 39 Test Rig for Determination of Performance Characteristics of High Speed Linear Actuators
  41. Altmetric Badge
    Chapter 40 Dynamic Analysis of Multispindle Lathe
  42. Altmetric Badge
    Chapter 41 Numerical and Experimental Solution of Friction Stir Welding of Plates
  43. Altmetric Badge
    Chapter 42 Universal HIL Test Platform for Mechatronic Systems
  44. Altmetric Badge
    Chapter 43 A Dynamic Feedback Neural Model for Identification of the Robot Manipulator
  45. Altmetric Badge
    Chapter 44 Innovative Model of Radial Fluid Bearing for Simulations of Turbocharger Rotordynamics
  46. Altmetric Badge
    Chapter 45 The Model of Non-stationary Heat Conduction in a Metal Mould
  47. Altmetric Badge
    Chapter 46 The Possibility of Applying Neural Networks to Influence Vehicle Energy Consumption by Eco Driving
  48. Altmetric Badge
    Chapter 47 Parametric Model of Human Body for Orthotic Robot Simulation Study
  49. Altmetric Badge
    Chapter 48 Evaluation of Gait and Standing Posture by Software Based on SimMechanics
  50. Altmetric Badge
    Chapter 49 FEM – Based Simulations of Selected Setups of Magnetic Field Tomography
  51. Altmetric Badge
    Chapter 50 Modelling and Simulation of Vehicle Boot Door
  52. Altmetric Badge
    Chapter 51 Advanced Multi-body Modelling in Mechatronics Education
  53. Altmetric Badge
    Chapter 52 Unusual Application of the X3STEP Controller
  54. Altmetric Badge
    Chapter 53 Disturbance Compensation and Control Algorithm with Application for Non-linear Twin Rotor MIMO System
  55. Altmetric Badge
    Chapter 54 Model Reference Control for a Class of MIMO System with Dead-Time
  56. Altmetric Badge
    Chapter 55 Robust Control of Uncertain MIMO Plants in Conditions of Output Quantization and Time-Delay
  57. Altmetric Badge
    Chapter 56 Speed Estimator for Low Speed PMSM Aerospace Application
  58. Altmetric Badge
    Chapter 57 The New Stepper Driver for Low-Cost Arduino Based 3D Printer with Dynamic Stepper Control
  59. Altmetric Badge
    Chapter 58 Model Based Fault-Tolerant Control for SMA Actuator in Soft Robotics
  60. Altmetric Badge
    Chapter 59 Design and Verification of FPGA-Based Real-Time HIL Simulator of Induction Motor Drive
  61. Altmetric Badge
    Chapter 60 Robust Control of a Robot Arm Using an Optimized PID Controller
  62. Altmetric Badge
    Chapter 61 PSO Optimized ADRC Motor Speed Controller for Two Mass System with Backlash
  63. Altmetric Badge
    Chapter 62 Separation of Gravitational Acceleration from Acceleration of Human Motion Using Quaternion Based Unscented Kalman Filter
  64. Altmetric Badge
    Chapter 63 Methods of Motion Data Analysis of Animal’s Body on Rotating Platform
  65. Altmetric Badge
    Chapter 64 Fabrication and Optical-Electrical Characterization of Al/p-Si/CdO/Au Photodiode
  66. Altmetric Badge
    Chapter 65 Threshold Selection Based on Extreme Value Theory
  67. Altmetric Badge
    Chapter 66 Development of a Time of Flight Laser Scanner 3D
  68. Altmetric Badge
    Chapter 67 Polish Road Signs Detection and Classification System Based on Sign Sketches and ConvNet
  69. Altmetric Badge
    Chapter 68 The Influence of the Learning Set on the Evaluation of Microcalcifications Using Artificial Neural Networks
  70. Altmetric Badge
    Chapter 69 Experimental Measurement of Magnetic Field Generated by Neodymium Magnet
  71. Altmetric Badge
    Chapter 70 Measurement of Power Transistors Dynamic Parameters
  72. Altmetric Badge
    Chapter 71 Measurement of High-Frequency Currents in Power Electronics
  73. Altmetric Badge
    Chapter 72 Counting Pedestrians in Inner Spaces Using Optical Flow Algorithm
  74. Altmetric Badge
    Chapter 73 Comparison of Vibration and Noise Measurement of Induction Machine Under Static Eccentricity
  75. Altmetric Badge
    Chapter 74 A Distributed Measurement System for Helium Spill Monitoring
  76. Altmetric Badge
    Chapter 75 Influence of Measurement Parameters Settings on the Results of the CT Measurement
  77. Altmetric Badge
    Chapter 76 Measurement System for Magnetic Field Sensors Testing with Earth’s Magnetic Field Compensation
  78. Altmetric Badge
    Chapter 77 DeepEMGNet: An Application for Efficient Discrimination of ALS and Normal EMG Signals
  79. Altmetric Badge
    Chapter 78 Comparison of Interpolation Methods for Atmospheric Pressure Determination with Help of TDOA System
  80. Altmetric Badge
    Chapter 79 Determination of Optimal Local Path for Mobile Robot
  81. Altmetric Badge
    Chapter 80 Development of Dual Wiimote-Based 3D Localization Schemes for Mobile Robot and Quadcopter Integration
  82. Altmetric Badge
    Chapter 81 Battery-Powered Autonomous Robot for Cleaning of Dusty Photovoltaic Panels in Desert Zones
  83. Altmetric Badge
    Chapter 82 Design and Control of Diving Mechanism for the Biomimetic Robotic Fish
  84. Altmetric Badge
    Chapter 83 Standards to Support Military Autonomous System Life Cycle
  85. Altmetric Badge
    Chapter 84 Robotic Assistant for the Elderly - Rehabilitation Walker
  86. Altmetric Badge
    Chapter 85 Motion Control of Three-Rotor Unmanned Underwater Vehicle
  87. Altmetric Badge
    Chapter 86 From Simulation to Manufacturing of Piezoelectric Micromachined AlN Membrane
  88. Altmetric Badge
    Chapter 87 Probabilistic Reasoning in Diagnostic Expert System for Smart Homes
  89. Altmetric Badge
    Chapter 88 Development of Smart and Dynamic Floral Clothing Accessories
  90. Altmetric Badge
    Chapter 89 Numerical Wave Tank Analysis for Energy Harvesting with Oscillating Water Column
  91. Altmetric Badge
    Chapter 90 Coil Optimization for Linear Electromagnetic Energy Harvesters with Non-uniform Magnetic Field
  92. Altmetric Badge
    Chapter 91 Performance Analysis of Wave Energy Harvesting System with Piezoelectric Element
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
2 patents

Citations

dimensions_citation
4 Dimensions

Readers on

mendeley
38 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Mechatronics 2017
Published by
Springer, Cham, January 2017
DOI 10.1007/978-3-319-65960-2
ISBNs
978-3-31-965959-6, 978-3-31-965960-2
Editors

Tomáš Březina, Ryszard Jabłoński

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 38 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 38 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 7 18%
Student > Master 6 16%
Student > Bachelor 6 16%
Researcher 4 11%
Professor > Associate Professor 3 8%
Other 5 13%
Unknown 7 18%
Readers by discipline Count As %
Engineering 20 53%
Energy 3 8%
Computer Science 2 5%
Nursing and Health Professions 1 3%
Economics, Econometrics and Finance 1 3%
Other 4 11%
Unknown 7 18%