↓ Skip to main content

Light Metals 2013

Overview of attention for book
Cover of 'Light Metals 2013'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Raw Material Impurities and the Challenge Ahead
  3. Altmetric Badge
    Chapter 2 Impacts of Impurities Introduced into the Aluminium Reduction Cell
  4. Altmetric Badge
    Chapter 3 Changes in Global Refining and Its Impact on Anode Quality Petroleum Coke
  5. Altmetric Badge
    Chapter 4 Impact of Higher Vanadium Levels on Smelter Operations
  6. Altmetric Badge
    Chapter 5 Impact on Smelter Operations of Operating High Purity Reduction Cells
  7. Altmetric Badge
    Chapter 6 Management of Impurities in Cast House with Particular Reference to Ni and V
  8. Altmetric Badge
    Chapter 7 An Initial Assessment of the Effects of Increased Ni and V Content in A356 and AA6063 Alloys
  9. Altmetric Badge
    Chapter 8 Implementation of Logic Control by DCS to Measure the Caustic Concentration in Spent Liquor
  10. Altmetric Badge
    Chapter 9 Study of Influences on the Alumina/Caustic (A/C) Ratio and Discharge Digestion (DBO) Caustic of Through Design of Experiments (DOE) Statistic Tool
  11. Altmetric Badge
    Chapter 10 Particle size distribution model for kinetics of digesting alumina
  12. Altmetric Badge
    Chapter 11 Fractal kinetic model for digesting alumina
  13. Altmetric Badge
    Chapter 12 MAX HT® Bayer Sodalite Scale Inhibiter: A Green Solution to Energy Consumption
  14. Altmetric Badge
    Chapter 13 Sodalite Solids Formation at the Surface of Iron Oxide and Its Impact on Flocculation
  15. Altmetric Badge
    Chapter 14 Improvement on the Operation Management System of Vertical Pressure Filters
  16. Altmetric Badge
    Chapter 15 Using a Multivariate Statistical in the Identification of Alumina Loss in Red Mud
  17. Altmetric Badge
    Chapter 16 Bevill and the Aluminum Industry
  18. Altmetric Badge
    Chapter 17 New Development Model for Bauxite Deposits - Dedicated Compact Refinery
  19. Altmetric Badge
    Chapter 18 Automatic Control of Drum Filters Operation
  20. Altmetric Badge
    Chapter 19 A New Technology for Dry Disposal of Alunorte’s Bauxite Residue
  21. Altmetric Badge
    Chapter 20 Pilot Test of Bauxite Residue Carbonation with Flue Gas
  22. Altmetric Badge
    Chapter 21 Management of Industrial Waste: The Case of Effective Utilization of Red Mud and Fly Ash at Vedanta Aluminium Limited - Lanjigarh
  23. Altmetric Badge
    Chapter 22 Iron Recovery from Red Mud by Reduction Roasting-Magnetic Separation
  24. Altmetric Badge
    Chapter 23 Removal of Methylene Blue from Aqueous Solutions Using a Novel Granular Red Mud Mixed with Cement
  25. Altmetric Badge
    Chapter 24 Environmentally Safe Operation of Barometric Condensers
  26. Altmetric Badge
    Chapter 25 Hatch - ETI Aluminyum Precipitation Modeling
  27. Altmetric Badge
    Chapter 26 Improve the Classification System in Hydro Alunorte Lines 4/5
  28. Altmetric Badge
    Chapter 27 Increase in the Stability of Gravimetric Classification System of Precipitation at Hydro Alunorte
  29. Altmetric Badge
    Chapter 28 “Experience with Commissioning New Generation Gas Suspension Calciner”
  30. Altmetric Badge
    Chapter 29 Bayer Process Efficiency Improvement
  31. Altmetric Badge
    Chapter 30 HyClass™ Technology for Improvement of Trihydrate Classification in the Bayer Process
  32. Altmetric Badge
    Chapter 31 Metallic Impurities from the Mine to Metal Products
  33. Altmetric Badge
    Chapter 32 The Control of Fluoride Concentration in ETİ Alüminyum Bayer Refinery Liquor
  34. Altmetric Badge
    Chapter 33 Beneficiation of High Silica Bauxite Ores of India an Innovative Approach
  35. Altmetric Badge
    Chapter 34 Morphological Investigation of Sodium Oxalate Crystals Grown in Aqueous Sodium Hydroxide Solution
  36. Altmetric Badge
    Chapter 35 Impurities in Raw Gas and Secondary Alumina
  37. Altmetric Badge
    Chapter 36 Innovative Technology for Alumina Production from Low-Grade Raw Materials
  38. Altmetric Badge
    Chapter 37 Improving Characterization of Low Grade Diasporic Bauxite to be Utilize in Jajarm Alumina Plant
  39. Altmetric Badge
    Chapter 38 The Processing of High Quartz Bauxite
  40. Altmetric Badge
    Chapter 39 Appropriate Reduction and Fe-Al Separation of High Iron Gibbsite
  41. Altmetric Badge
    Chapter 40 Influence of MgO and C/A and Cooling System on Alumina Leaching Properties of Calcium Aluminate Slag
  42. Altmetric Badge
    Chapter 41 Calcification - Carbonation Method for Alumina Production by Using Low-Grade Bauxite
  43. Altmetric Badge
    Chapter 42 Basic Research on Calcification Transformation Process of Low Grade Bauxite
  44. Altmetric Badge
    Chapter 43 Research on the phase transformation and separation performance in calcification - carbonation method for alumina production
  45. Altmetric Badge
    Chapter 44 Mechanical Properties of Al-Zn-Mg-Cu Alloys Processed with High-Pressure Torsion
  46. Altmetric Badge
    Chapter 45 High-Performance Be-Al Casting Alloys
  47. Altmetric Badge
    Chapter 46 Structure Optimization of Al-Si-Type Alloys for Thermal and Mechanical High Loaded Components
  48. Altmetric Badge
    Chapter 47 Development of High Strength Aluminium Alloys at BALCO
  49. Altmetric Badge
    Chapter 48 Strength and Failure of Ultrafine Grain and Bimodal Al-Mg Alloy at High Temperatures
  50. Altmetric Badge
    Chapter 49 Process development of AA3103 aluminum alloy for automotive thins
  51. Altmetric Badge
    Chapter 50 Atom Probe Analysis of Sr Distribution in AlSi Foundry Alloys
  52. Altmetric Badge
    Chapter 51 The Role of Sr on Microstructure Formation and Mechanical Properties of Al-Si-Cu-Mg Cast Alloy
  53. Altmetric Badge
    Chapter 52 Modification of the Eutectic Mg2si-Phase of AlMgSi-Cast Alloys
  54. Altmetric Badge
    Chapter 53 The influence of casting speed in the as cast strip mechanical properties of 8079 and 8006 alloys
  55. Altmetric Badge
    Chapter 54 Effect of Cooling Rate on Iron-rich Intermetallic Phases in 206 Cast Alloys
  56. Altmetric Badge
    Chapter 55 Effect of Iron in Al-Mg-Si-Mn Ductile Diecast Alloy
  57. Altmetric Badge
    Chapter 56 Oxidation Behavior of Al2Ca Added Al-5Mg Alloy in the Liquid State
  58. Altmetric Badge
    Chapter 57 Effect of the Thermal Modulus and Mould Type on the Grain Size of AlSi7Mg Alloy
  59. Altmetric Badge
    Chapter 58 Alloy ALSi30 Cast in the Process of Rapid Solidification and Consolidated in the Process of Plastic Forming
  60. Altmetric Badge
    Chapter 59 Effect of Homogenization Treatment Conditions on the Recrystallization Behavior of Al-1.2Mn Aluminum Alloy Sheets
  61. Altmetric Badge
    Chapter 60 Toward a Recrystallized Microstructure in Extruded AA6005A Alloy
  62. Altmetric Badge
    Chapter 61 Grain Subdivision and Its Effect on Texture Evolution in an Aluminum Alloy Under Plane Strain Compression
  63. Altmetric Badge
    Chapter 62 Fatigue Analysis of Ultrafine Grained Al 1050 Alloy Produced by Cyclic Forward Backward Extrusion
  64. Altmetric Badge
    Chapter 63 Effect of Zn Content and Process Parameters on Corrosion Behaviour of Twin-Roll Cast Aluminum Brazing Alloys
  65. Altmetric Badge
    Chapter 64 Growth ledges on silver-segregated θ′ (Al2Cu) precipitates
  66. Altmetric Badge
    Chapter 65 On the Aging Behavior of AA2618 DC Cast Alloy
  67. Altmetric Badge
    Chapter 66 The Effect of Cold Work on the Precipitation and Recrystallization Kinetics in Al-Sc-Zr Alloys
  68. Altmetric Badge
    Chapter 67 A Novel Solution Heat Treatment of 7075-Type Alloy
  69. Altmetric Badge
    Chapter 68 Experimental study of the Al-rich corner of the Al-Si-Ti system at 500 °C
  70. Altmetric Badge
    Chapter 69 Transient microstructural thermomechanical fatigue and deformation characteristics under superimposed mechanical and thermal loading, in AlSi based automotive diesel pistons
  71. Altmetric Badge
    Chapter 70 Mechanical Behaviour of Cold Formed Metal-Polymer Laminate and the Interaction of Its Layers
  72. Altmetric Badge
    Chapter 71 Mechanical and Tribological Properties of AA2124-Graphene Self Lubricating Nanocomposite
  73. Altmetric Badge
    Chapter 72 Joining Vacuum High Pressure Die Cast A356 Under T4 Treatment to Wrought Alloy 6061
  74. Altmetric Badge
    Chapter 73 Applications of the Horizontal Squeeze Casting Process for Automotive Parts Manufacturing
  75. Altmetric Badge
    Chapter 74 Characterization of the Developed Precipitates in Al-2 at.%Zn - x at.%Mg, (x=1.8, 2, 2.4, 3, 4.2)
  76. Altmetric Badge
    Chapter 75 Design and Development of a Permanent Mould for the Production of Motor-Cycle Piston in SEDI-Enugu.
  77. Altmetric Badge
    Chapter 76 Development and Research of New Aluminium Alloys with Transition and Rare-Earth Metals and Equipment for Production of Wire for Electrotechnical Applications by Methods of Combined Processing
  78. Altmetric Badge
    Chapter 77 Influence of Machining Parameters on Al-4.5Cu-TiC In-Situ Metal Matrix Composites
  79. Altmetric Badge
    Chapter 78 Effect of Mg Contents on Fluidity of Al-xMg Alloys
  80. Altmetric Badge
    Chapter 79 Effect of Process Parameters on Centrifugally Cast Al-Si FGM
  81. Altmetric Badge
    Chapter 80 Effects of Minor Sc Addition on the Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Casting Aluminum Alloy
  82. Altmetric Badge
    Chapter 81 Microhardness, Corrosion Behaviour and Microstructures of Directionally Solidified Al-Cu Alloys
  83. Altmetric Badge
    Chapter 82 Production of Single Cylinder Engine Components Through High Pressure Die Casting in Sedi Enugu
  84. Altmetric Badge
    Chapter 83 The Effect of Thermomechanical Ageing of Aluminium-Copper Alloy (MATLAB Approach)
  85. Altmetric Badge
    Chapter 84 Surface Crack Characterization of Twin Roll Caster Shells and Its Influence on As-Cast Strip Surface Quality
  86. Altmetric Badge
    Chapter 85 The Effect of Magnesium Content on Microstructure Evolution During Hot Deformation of Aluminum Alloys
  87. Altmetric Badge
    Chapter 86 High Strength Nanostructured Al-Zn-Mg-Cu-Zr Alloy Manufactured by High-Pressure Torsion
  88. Altmetric Badge
    Chapter 87 Corrosion Behavior of 2024 Aluminum Alloy Anodized in Sulfuric Acid Containing Inorganic Inhibitor
  89. Altmetric Badge
    Chapter 88 Laboratory simulation of wear during hot extrusion of aluminium
  90. Altmetric Badge
    Chapter 89 The Production of Wrought AlSi30Cu1.5Mg1.2Ni1.5Fe0.8 Alloy with Ultrafine Structure
  91. Altmetric Badge
    Chapter 90 The Structure and Properties of Wrought Aluminium Alloys Series 6xxx with Vanadium for Automotive Industry”
  92. Altmetric Badge
    Chapter 91 In Depth Analysis of Energy-Saving and Current Efficiency Improvement of Aluminum Reduction Cells
  93. Altmetric Badge
    Chapter 92 Rio Tinto Alcan AP4X Low Energy Cell Development
  94. Altmetric Badge
    Chapter 93 Energy Reduction Technology for Aluminum Electrolysis: Choice of the Cell Voltage
  95. Altmetric Badge
    Chapter 94 Advancements of Dubal High Amperage Reduction Cell Technologies
  96. Altmetric Badge
    Chapter 95 Development of Low-Voltage Energy-Saving Aluminum Reduction Technology
  97. Altmetric Badge
    Chapter 96 D18+: Potline Modernisation at DUBAL
  98. Altmetric Badge
    Chapter 97 Industry Test of Perforation Anode in Aluminium Electrolysis Technology
  99. Altmetric Badge
    Chapter 98 The First Results of the Indus Trial Application of the Ecosøderberg Technology at the Krasnoyarsk Aluminum Smelter
  100. Altmetric Badge
    Chapter 99 Unsteady MHD modeling applied to cell stability
  101. Altmetric Badge
    Chapter 100 Impact of magnetohydrodynamic and bubbles driving forces on the alumina concentration in the bath of an Hall-Héroult cell
  102. Altmetric Badge
    Chapter 101 Investigation of Electrolytic Bubble Behaviour in Aluminum Smelting Cell
  103. Altmetric Badge
    Chapter 102 Mathematical Model Validation of Aluminium Electrolysis Cells at DUBAL
  104. Altmetric Badge
    Chapter 103 Production Application Study on Magneto-Hydro-Dynamic Stability of a Large Prebaked Anode Aluminum Reduction Cell
  105. Altmetric Badge
    Chapter 104 MHD of Aluminium Cells with the Effect of Channels and Cathode Perturbation Elements
  106. Altmetric Badge
    Chapter 105 Magnetohydrodynamic Model Coupling Multiphase Flow in Aluminum Reduction Cell with Innovative Cathode Protrusion
  107. Altmetric Badge
    Chapter 106 Optimization of the Cathode Collector Bar with a Copper Insert Using Finite Element Method
  108. Altmetric Badge
    Chapter 107 Energy Savings in Aluminum Electrolysis Cells: Effect of the Cathode Design
  109. Altmetric Badge
    Chapter 108 Low Power Operation at Aluminium Dunkerque Smelter
  110. Altmetric Badge
    Chapter 109 Maximizing Creeping Value through Rigorous Methodology
  111. Altmetric Badge
    Chapter 110 The Quick Shut Down and Restarting of 291 kA Pre-Baked Potline at JSC “RUSAL Sayanogorsk» from May to August 2011
  112. Altmetric Badge
    Chapter 111 Production Growth and Future Challenges in Aluminium Bahrain (Alba)
  113. Altmetric Badge
    Chapter 112 High Frequency Power Modulation - TRIMET smelters provide primary control power for stabilizing the frequency in the electricity grid
  114. Altmetric Badge
    Chapter 113 Autonomous Vehicle and Smelter Technologies
  115. Altmetric Badge
    Chapter 114 Preventive Maintenance of Transport Vehicles is it improving production stability of a smelter?
  116. Altmetric Badge
    Chapter 115 Composition and Thermal Analysis of Crust Formed from Industrial Anode Cover
  117. Altmetric Badge
    Chapter 116 Liquidus Temperatures of Na3AlF6-AlF3-CaF2-KF-LiF-Al2O3 Melts
  118. Altmetric Badge
    Chapter 117 The Effect of Calcium Fluoride on Alumina Solubility in Low Temperature Cryolite Melts
  119. Altmetric Badge
    Chapter 118 Conductivity of KF-NaF-AlF3 System Low-temperature Electrolyte
  120. Altmetric Badge
    Chapter 119 Numerical analysis of ionic mass transfer in the electrolytic bath of an aluminium reduction cell
  121. Altmetric Badge
    Chapter 120 Liquidus Temperature of Electrolytes for Aluminum Reduction Cells
  122. Altmetric Badge
    Chapter 121 Effect of LiAlO2 and KF on Physicochemical Properties for Industrial Aluminum Electrolyte
  123. Altmetric Badge
    Chapter 122 Improvement of Alumina Dissolution Rate through Alumina Feeder Pipe Modification
  124. Altmetric Badge
    Chapter 123 Reduction Cell Restart Method Influence on Cell Life Evolution
  125. Altmetric Badge
    Chapter 124 Start of an Aluminum Reduction Cell without Liquid Bath
  126. Altmetric Badge
    Chapter 125 A MIMO Modeling Strategy for Bath Chemistry
  127. Altmetric Badge
    Chapter 126 Cumulative Distributions of Metallic Impurities
  128. Altmetric Badge
    Chapter 127 Sodium Content in Aluminum and Current Efficiency — Correlation through Multivariate Analysis
  129. Altmetric Badge
    Chapter 128 Gas-Solid Flow Applications for Powder Handling in Aluminum Smelters Processes
  130. Altmetric Badge
    Chapter 129 Operational Experience of Advanced Alumina Handling Technology in a Russian Smelter
  131. Altmetric Badge
    Chapter 130 Reduction in HF emission through improvement in operational practices
  132. Altmetric Badge
    Chapter 131 Trace Element Concentration in Particulates from Pot Exhaust and Depositions in Fume Treatment Facilities
  133. Altmetric Badge
    Chapter 132 The Study and Applications of Modern Potline Fume Treatment Plant (FTP)
  134. Altmetric Badge
    Chapter 133 F&GTC: Combined Treatment of Pot Gases and Anode Baking Furnace Fumes
  135. Altmetric Badge
    Chapter 134 Compact Filter Design for Gas Treatment Centers
  136. Altmetric Badge
    Chapter 135 An Innovative Compact Heat Exchanger Solution for Aluminum Off-Gas Cooling and Heat Recovery
  137. Altmetric Badge
    Chapter 136 Latest Filter Developments Increasing Existing Aluminium Smelter Gas Treatment Centre Capacity and Reducing Emissions
  138. Altmetric Badge
    Chapter 137 Reduced Ventilation of Upper Part of Aluminum Smelting Pot: Potential Benefits, Drawbacks, and Design Modifications
  139. Altmetric Badge
    Chapter 138 Latest developments in potroom building ventilation CFD modelling
  140. Altmetric Badge
    Chapter 139 Solutions to Address Arc Welding Problems in an Operating Potline
  141. Altmetric Badge
    Chapter 140 Replacement of Damaged Electrical Insulators on Live Cross-Over Busbars inside a Tunnel: A Methodology Based on Risk Assessment and Numerical Simulation
  142. Altmetric Badge
    Chapter 141 A Thermal-Mechanical Approach for the Design of Busbars Details
  143. Altmetric Badge
    Chapter 142 Study of Technology and Equipment on Magnetic Induction Intensity Weaken for Aluminum Reduction Cells Welding in the Condition of Pot Line Current
  144. Altmetric Badge
    Chapter 143 Potline Shutdown and Restart Secured Solutions
  145. Altmetric Badge
    Chapter 144 Effect of Watering and Non-Watering Cooling Rates on the Mechanical Properties of an Aluminum Smelter’s Potshell
  146. Altmetric Badge
    Chapter 145 Mathematical Model of Cooling of a Stopped Pot and Its Validation
  147. Altmetric Badge
    Chapter 146 A Study of Low Voltage PFC Emissions at Dubal
  148. Altmetric Badge
    Chapter 147 Continuous PFC Emissions Measured on Individual 400kA Cells
  149. Altmetric Badge
    Chapter 148 PFC and Carbon Dioxide Emissions from an Australian Aluminium Smelter Using Time-Integrated Stack Sampling and GC-MS, GC-FID Analysis
  150. Altmetric Badge
    Chapter 149 Investigation on Formation Mechanism of Non-Anode Effect Related PFC Emissions from Aluminum Reduction Cells
  151. Altmetric Badge
    Chapter 150 On the Mechanism Behind Low Voltage PFC Emissions
  152. Altmetric Badge
    Chapter 151 Frequency response analysis of anode current signals as a diagnostic aid for detecting approaching anode effects in aluminum smelting cells
  153. Altmetric Badge
    Chapter 152 Reduction Strategies for PFC Emissions from Chinese Smelters
  154. Altmetric Badge
    Chapter 153 Off-Gas Analysis of Laboratory-Scale Electrolysis Experiments with Anodes of Various Compositions
  155. Altmetric Badge
    Chapter 154 Hydrolysis of Carbonyl Sulfide (COS) on Smelting Grade Alumina
  156. Altmetric Badge
    Chapter 155 A Thermodynamic Approach to the Corrosion of the Cathode Refractory Lining in Aluminium Electrolysis Cell: Modelling of the Al2O3-Na2O-SiO2-AlF3-NaF-SiF4 System
  157. Altmetric Badge
    Chapter 156 Effect of Current Density and Phosphorus Impurities on the Current Efficiency for Aluminum Deposition in Cryolite-Alumina Melts in a Laboratory Cell
  158. Altmetric Badge
    Chapter 157 Very High Purity Ingot — An Endangered Species?
  159. Altmetric Badge
    Chapter 158 The Challenge of Effectively Utilizing Trace Elements/Impurities in a Varying Raw Materials Market
  160. Altmetric Badge
    Chapter 159 Energy control in primary aluminium casthouse furnaces
  161. Altmetric Badge
    Chapter 160 Metal Contamination Associated with Dross Processing
  162. Altmetric Badge
    Chapter 161 Ultrasonic Degassing and Processing of Aluminum
  163. Altmetric Badge
    Chapter 162 Kinetics of Ultrasonic Degassing of Aluminum Alloys
  164. Altmetric Badge
    Chapter 163 Removal of Inclusions in Molten Aluminum by Flux Injection Under Counter-Gravity
  165. Altmetric Badge
    Chapter 164 Advanced Compact Filtration (ACF): An Efficient and Flexible Filtration Process
  166. Altmetric Badge
    Chapter 165 Electromagnetic Priming of Ceramic Foam Filters (CFF) for Liquid Aluminum Filtration
  167. Altmetric Badge
    Chapter 166 Plant Scale Investigation of Liquid Aluminium Filtration by Al2O3 and SiC Ceramic Foam Filters
  168. Altmetric Badge
    Chapter 167 Casting Practices Influencing Inclusion Distributions in Billets
  169. Altmetric Badge
    Chapter 168 Oxidation of Commercial Purity Aluminum Melts: An Experimental Study
  170. Altmetric Badge
    Chapter 169 Optimisation of Grain Refinement
  171. Altmetric Badge
    Chapter 170 Grain Refiner for Al-Si Alloys
  172. Altmetric Badge
    Chapter 171 Production of Al-Ti-B Grain Refining Master Alloys from B2O3 and K2TiF6 by Microwave Irradiation
  173. Altmetric Badge
    Chapter 172 Effects of Yb Additions on Refinement of Eutectic Si in Al-5Si Alloys
  174. Altmetric Badge
    Chapter 173 Influence of Vanadium on the Microstructure of A356 Foundry Alloy
  175. Altmetric Badge
    Chapter 174 Influence of die and casting temperatures and titanium and strontium contents on the technological properties of die-cast A356 in the as-cast and T6 condition
  176. Altmetric Badge
    Chapter 175 Horizontal Single Belt Strip Casting (HSBC) of Al-Mg-Sc-Zr Alloys
  177. Altmetric Badge
    Chapter 176 Review of Different Techniques to Study the Interactions Between Coke and Pitch in Anode Manufacturing
  178. Altmetric Badge
    Chapter 177 Observations on the Coke Air Reactivity Test
  179. Altmetric Badge
    Chapter 178 Impurity Removal from Petroleum Coke
  180. Altmetric Badge
    Chapter 179 Calcined Coke Round Robin 19 and the Precision of Bulk Density Tests
  181. Altmetric Badge
    Chapter 180 A Method for the Rapid Characterization of Petroleum Coke Microstructure Using Polarized Light Microscopy
  182. Altmetric Badge
    Chapter 181 Improvements of Vibrated Bulk Density Analysis at VM-CBA and Petrocoque S.A
  183. Altmetric Badge
    Chapter 182 Influence of GPC Properties on the CPC Quality
  184. Altmetric Badge
    Chapter 183 Quality of Calcined Petroleum Coke and Its Influence on Aluminium Smelting
  185. Altmetric Badge
    Chapter 184 A Green Anode Plant Performance Analysis Tool Fully Embedded in the Plant Control System
  186. Altmetric Badge
    Chapter 185 Measures to Prevent Baked Anode Density Drop When Using High Porosity Cokes
  187. Altmetric Badge
    Chapter 186 New Green Anode Plant at EMAL Start-Up & Operation in the First Two Years
  188. Altmetric Badge
    Chapter 187 Improving Anode Baked Density and Air Permeability through Process Optimization and Coke Blending
  189. Altmetric Badge
    Chapter 188 Development of an Analytical Dynamic Model of a Vibro-Compactor Used in Carbon Anode Production
  190. Altmetric Badge
    Chapter 189 Driving Cost Reduction and Carbon Plant Productivity Improvement through Theory of Constraints and Planned Maintenance Capability
  191. Altmetric Badge
    Chapter 190 Optimum Vibration Time for Green Anode Production
  192. Altmetric Badge
    Chapter 191 Comparison of Mixing Process Methods in Prebaked Anode Production
  193. Altmetric Badge
    Chapter 192 Hydro Aluminium’s Historical Evolution of Closed Type Anode Baking Furnace Technology
  194. Altmetric Badge
    Chapter 193 Use of Mathematical Modelling to Study the Behavior of a Horizontal Anode Baking Furnace
  195. Altmetric Badge
    Chapter 194 Study on Anode Baking Parameres in Open-Top and Closed-Type Ring Furnaces
  196. Altmetric Badge
    Chapter 195 Energy Efficiency Improvement in Anode Baking Furnaces
  197. Altmetric Badge
    Chapter 196 Anode Baking Process Improvement at ALRO
  198. Altmetric Badge
    Chapter 197 Operational and Environmental Benefits of the New Baking Furnace at Boyne Smelters by Use of an Advanced Firing Technology
  199. Altmetric Badge
    Chapter 198 Laser Mapping of Carbon Bake Furnaces
  200. Altmetric Badge
    Chapter 199 Pilot Scale Anodes for Raw Material Evaluation and Process Improvement
  201. Altmetric Badge
    Chapter 200 Relationships between Coke Properties and Anode Properties — Round Robin 19
  202. Altmetric Badge
    Chapter 201 Application of the Artificial Neural Network (ANN) in Predicting Anode Properties
  203. Altmetric Badge
    Chapter 202 A Model for Predicting the Electrical Resistivity of Baked Anodes
  204. Altmetric Badge
    Chapter 203 The Role of Electrode Quality in Metal Purity
  205. Altmetric Badge
    Chapter 204 Electrochemical Characterization of Carbon Anode Performance
  206. Altmetric Badge
    Chapter 205 High Capacity Thermobalance Anode Reactivity Testing
  207. Altmetric Badge
    Chapter 206 Diagnosing Changes in Baked Anode Properties using a Multivariate Data-driven Approach
  208. Altmetric Badge
    Chapter 207 Evolution of the Thermo-Mechanical Properties of Ramming Paste from Ambient to Operating Temperature in a Hall-Heroult Cell
  209. Altmetric Badge
    Chapter 208 New Compaction Method for the Production of Large Ramming Paste Samples for 3D Mechanical Characterization
  210. Altmetric Badge
    Chapter 209 Technology for Manufacturing Cathodes for Aluminium Reduction in China
  211. Altmetric Badge
    Chapter 210 The Effect of Cryolite on the Formation of Aluminum Carbide at the Carbon Aluminum Interface
  212. Altmetric Badge
    Chapter 211 Critical Reflections on Laboratory Wear Tests for Ranking Commercial Cathode Materials in Aluminium Cells
  213. Altmetric Badge
    Chapter 212 Model for Excessive Cathode Wear By a “Carbon Pump” at the Cell Bottom
  214. Altmetric Badge
    Chapter 213 Characterization of Porous Structure and its Correlation to Sodium Expansion of Graphite Cathode Materials Using Image Analysis
  215. Altmetric Badge
    Chapter 214 Studies on the Resistance to Alkali Metal Penetration of Binders for TiB2-C Composite Cathode Materials
  216. Altmetric Badge
    Chapter 215 Mechanically alloyed Cu-Ni-Fe-Y material as inert anode for Al production
  217. Altmetric Badge
    Chapter 216 Cold Spray deposition of mechanically alloyed Cu-Ni-Fe material for application as inert anodes for aluminum production
  218. Altmetric Badge
    Chapter 217 Initial 1000A Aluminum Electrolysis Testing in Potassium Cryolite-Based Electrolyte
  219. Altmetric Badge
    Chapter 218 Electrochemical Behavior of Cermet Anodes in Na3AlF6-K3AlF6-Based Low-Melting Electrolytes for Aluminium Electrolysis
  220. Altmetric Badge
    Chapter 219 Production of Aluminum Sulfide through Carbosulfidation Utilising H2S
  221. Altmetric Badge
    Chapter 220 Microstructural Evolution of Cast Iron Used for Cathode Rodding in Aluminium Electrolysis Cell
  222. Altmetric Badge
    Chapter 221 Preparing Al-Sc-Zr Alloys in Aluminum Electrolysis Process
  223. Altmetric Badge
    Chapter 222 Fume Treatment Systems Based on RTO Technology for Carbon Baking Furnaces
  224. Altmetric Badge
    Chapter 223 AHEX- A New, Combined Waste Heat Recovery and Emission Control System for Anode Bake Furnaces
  225. Altmetric Badge
    Chapter 224 Successful Start-Up of the Fume Treatment Centre at Boyne Smelter Carbon Bake Furnace #4
  226. Altmetric Badge
    Chapter 225 Thermo-electro-mechanical characterization of anode interfaces at operating conditions
  227. Altmetric Badge
    Chapter 226 A Fully Coupled Thermal-Electrical-Mechanical Transient FEA Model for a 3D Anode Assembly
  228. Altmetric Badge
    Chapter 227 Experimental and Numerical Investigation of Voltage Drop in Anode Assemblies
  229. Altmetric Badge
    Chapter 228 Optimization of the Anode-Stub Contact: Effect of Casting Temperature, Contact Stress and Temperature and Surface Roughness
  230. Altmetric Badge
    Chapter 229 Experimental Investigation of Factors Affecting the Electrical Performance of the Stub to Carbon Connection
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
2 patents

Citations

dimensions_citation
8 Dimensions

Readers on

mendeley
3 Mendeley
citeulike
1 CiteULike
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Light Metals 2013
Published by
Springer, Cham, January 2016
DOI 10.1007/978-3-319-65136-1
ISBNs
978-3-31-965135-4, 978-3-31-965136-1
Editors

Barry A. Sadler

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 3 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 3 100%

Demographic breakdown

Readers by professional status Count As %
Researcher 2 67%
Student > Ph. D. Student 1 33%
Readers by discipline Count As %
Materials Science 2 67%
Chemistry 1 33%