↓ Skip to main content
What is this page? Embed badge

Condition Monitoring of Machinery in Non-Stationary Operations

Overview of attention for book
Cover of 'Condition Monitoring of Machinery in Non-Stationary Operations'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Separation of Gear and Bearing Fault Signals from a Wind Turbine Transmission under Varying Speed and Load
  3. Altmetric Badge
    Chapter 2 Object and Operation Factor Oriented Diagnostics
  4. Altmetric Badge
    Chapter 3 Rényi Entropy Based Statistical Complexity Analysis for Gear Fault Prognostics under Variable Load
  5. Altmetric Badge
    Chapter 4 Non Linear Transient Response of a Flexible Shaft Controlled by Electro-rheological Hydrostatic Squeeze Film Dampers
  6. Altmetric Badge
    Chapter 5 STFT Based Approach for Ball Bearing Fault Detection in a Varying Speed Motor
  7. Altmetric Badge
    Chapter 6 Kurtosis over Energy Distribution Approach for STFT Enhancement in Ball Bearing Diagnostics
  8. Altmetric Badge
    Chapter 7 Detecting AE Signals from Natural Degradation of Slow Speed Rolling Element Bearings
  9. Altmetric Badge
    Chapter 8 Leak Detection in Viscoelastic Pipe by Transient Analysis
  10. Altmetric Badge
    Chapter 9 Gear Fault Detection under Fluctuating Operating Conditions by Means of Discrepancy Analysis
  11. Altmetric Badge
    Chapter 10 Bearing Fault Diagnosis Using Neural Network and Genetic Algorithms with the Trace Criterion
  12. Altmetric Badge
    Chapter 11 Using Parametric Dynamical Models to Determine Observability Requirements for Condition Monitoring Systems
  13. Altmetric Badge
    Chapter 12 Impedance Method for Modeling and Locating Leak with Cylindrical Geometry
  14. Altmetric Badge
    Chapter 13 Influence of the Acyclism on the Dynamics of a Spur Gear System
  15. Altmetric Badge
    Chapter 14 Model Based Investigation on a Two Stages Gearbox Dynamics under Non-stationary Operations
  16. Altmetric Badge
    Chapter 15 Rotor Speed Identification Using Two Nonlinear Observers for Induction Motor Drive
  17. Altmetric Badge
    Chapter 16 Gear Transmission Dynamics Supported by Bearings Including Tooth Profile Deviations
  18. Altmetric Badge
    Chapter 17 Effects of Gyroscopic Coupling on the Dynamics of a Wind Turbine Blade with Horizontal Axis
  19. Altmetric Badge
    Chapter 18 Eccentricity Incidence on the Nonlinear Behavior of a Helical Gear
  20. Altmetric Badge
    Chapter 19 A Maintenance Alarm for Alternators Based on Eigensolutions
  21. Altmetric Badge
    Chapter 20 Multi-objective Discrete Rotor Design Optimization
  22. Altmetric Badge
    Chapter 21 A Critical Speed Optimization of Rail Vehicle System Based on Safety Criterion
  23. Altmetric Badge
    Chapter 22 Dynamic Behavior of an Aerodynamics Turbine Coupled to a Multiplier Helical Three-Stage Gear
  24. Altmetric Badge
    Chapter 23 Gearbox Fault Diagnosis Using Time-Wavelet Energy Spectral Analysis
  25. Altmetric Badge
    Chapter 24 Numerical Investigations on the Magnitude of Disturbance That Could Be Detected through IAS Monitoring
  26. Altmetric Badge
    Chapter 25 Time-Frequency Analysis Techniques Review and Their Application on Roller Bearings Prognostics
  27. Altmetric Badge
    Chapter 26 Reconstruction of Sound Sources of Gear Transmission Mechanism by Planar Near Field Acoustical Holography
  28. Altmetric Badge
    Chapter 27 Application of Empirical Mode Decomposition for Impulsive Signal Extraction to Detect Bearing Damage – Industrial Case Study
  29. Altmetric Badge
    Chapter 28 On the Use of Fourier-Bessel Series Expansion for Gear Diagnostics
  30. Altmetric Badge
    Chapter 29 Genetic Optimization of Decision Tree Choice for Fault Diagnosis in an Industrial Ventilator
  31. Altmetric Badge
    Chapter 30 Combining RBF-PCA-ReliefF Filter for a Better Diagnosis Performance in Rotating Machines
  32. Altmetric Badge
    Chapter 31 Acoustical Holography for Non-Stationary Sources Using Orthogonal-Like Fractional Octave Band Filters
  33. Altmetric Badge
    Chapter 32 Application of Schur Filtering for Local Damage Detection in Gearboxes
  34. Altmetric Badge
    Chapter 33 Feature Selection for Diesel Engine Fault Classification
  35. Altmetric Badge
    Chapter 34 Gears and Bearings Combined Faults Detection Using Hilbert Transform and Wavelet Multiresolution Analysis
  36. Altmetric Badge
    Chapter 35 Artificial Immune System for Condition Monitoring Based on Euclidean Distance Minimization
  37. Altmetric Badge
    Chapter 36 Conditioning of a Spectral Indicator for the Detection of Rotor Faults of an Induction Motor by Using the TSA Method
  38. Altmetric Badge
    Chapter 37 Numerical Tool for Extraction of Modal Parameters Based on Continuous Wavelet Transform
  39. Altmetric Badge
    Chapter 38 Integrated Modulation Intensity Distribution as a Practical Tool for Condition Monitoring – Part 1: Theoretical Investigation
  40. Altmetric Badge
    Chapter 39 Integrated Modulation Intensity Distribution as a Practical Tool for Condition Monitoring – Part 2: Case Study of the Wind Turbine
  41. Altmetric Badge
    Chapter 40 A Non-zero Padding Method in the Angle Domain to Improve the Order Spectrum Resolution of Computed Order Tracking
  42. Altmetric Badge
    Chapter 41 Fractal Based Signal Processing for Fault Detection in Ball-Bearings
  43. Altmetric Badge
    Chapter 42 The Role of Condition Based Maintenance for Industrial Equipment and Cancer Screening
  44. Altmetric Badge
    Chapter 43 Integration of Production Data in CM for Non-stationary Machinery: A Data Fusion Approach
  45. Altmetric Badge
    Chapter 44 Instantaneous Angular Speed Monitoring of a 2MW Wind Turbine Using a Parametrization Process
  46. Altmetric Badge
    Chapter 45 Application of Spectral Kurtosis to Acoustic Emission Signatures from Bearings
  47. Altmetric Badge
    Chapter 46 Diagnosing of Rotor Systems of Marine Gas Turbine Engines in Nonstationary States
  48. Altmetric Badge
    Chapter 47 Robust Fragmentation of Vibration Signals for Comparative Analysis in Signal Validation
  49. Altmetric Badge
    Chapter 48 Application of Vibration Monitoring for Mining Machinery in Varying Operational Conditions
  50. Altmetric Badge
    Chapter 49 Application of Time Descriptors to the Modified Hilbert Transform of Empirical Mode Decomposition for Early Detection of Gear Defects
  51. Altmetric Badge
    Chapter 50 State Space Modeling Theory of Induction Motors for Sensorless Control and Motoring Purposes
  52. Altmetric Badge
    Chapter 51 Some Remarks on Using Condition Monitoring for Spatially Distributed Mechanical System Belt Conveyor Network in Underground Mine – A Case Study
  53. Altmetric Badge
    Chapter 52 Statistical Data Processing for Wind Turbine Generator Bearing Diagnostics
  54. Altmetric Badge
    Chapter 53 Seeded Damage Detection on Self-aligning Ball Bearings with Acoustic Emission
  55. Altmetric Badge
    Chapter 54 Effect of Uncertainties in Default Detection through the Wave Finite Elements
  56. Altmetric Badge
    Chapter 55 Centralized and Decentralized Adaptive FTC of Interconnected and Networked Control System
  57. Altmetric Badge
    Chapter 56 Variable Drive Frequency Effect on Spindle Dynamic Behavior in High Speed Machining
  58. Altmetric Badge
    Chapter 57 Experimental Non-obstructive Particles Damping Approach for Passive Vibration
  59. Altmetric Badge
    Chapter 58 The Application of a First-Principle Damper Model for Tracking the Variation of Eigenvalues under Non-stationary Road Excitation
  60. Altmetric Badge
    Chapter 59 Adjustment of a Feedwater Heater Model in Bi-stationary Load Conditions
  61. Altmetric Badge
    Chapter 60 Iterative Method for the Remote Identification of Impact Forces at Multiple Clearance Supports Using Few Vibratory Measurements
  62. Altmetric Badge
    Chapter 61 Robust Optimization of Gear Tooth Modifications Using a Genetic Algorithm
  63. Altmetric Badge
    Chapter 62 Parametric Study on Energy Pumping of Mdof System Using Multiple Dynamic Absorbers
  64. Altmetric Badge
    Chapter 63 Chatter Recognition in Band Sawing Based on Feature Extraction and Discriminant Analysis
  65. Altmetric Badge
    Chapter 64 Damping in Bolted Structures
  66. Altmetric Badge
    Chapter 65 Dynamic Analysis of an Offshore Wind Turbine Drivetrain on a Floating Support
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

wikipedia
1 Wikipedia page

Readers on

mendeley
69 Mendeley
citeulike
1 CiteULike
Summary Wikipedia
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Condition Monitoring of Machinery in Non-Stationary Operations
Published by
Springer Science & Business Media, March 2012
DOI 10.1007/978-3-642-28768-8
ISBNs
978-3-64-228768-8, 978-3-64-228767-1
Editors

Fakhfakh, Tahar, Bartelmus, Walter, Chaari, Fakher, Zimroz, Radoslaw, Haddar, Mohamed

View on publisher site Google Preview
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 69 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 69 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 18 26%
Researcher 8 12%
Student > Master 6 9%
Student > Doctoral Student 4 6%
Student > Postgraduate 4 6%
Other 12 17%
Unknown 17 25%
Readers by discipline Count As %
Engineering 37 54%
Unspecified 3 4%
Computer Science 2 3%
Business, Management and Accounting 2 3%
Immunology and Microbiology 1 1%
Other 4 6%
Unknown 20 29%

This page is provided by Altmetric.