↓ Skip to main content

Advances in Cryogenic Engineering Materials

Overview of attention for book
Cover of 'Advances in Cryogenic Engineering Materials'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Effect of an 8 Tesla Magnetic Field on Mechanical Properties of Incoloy 908 Alloy at 4K
  3. Altmetric Badge
    Chapter 2 Avoidance Method Study for SAGBO Cracking During Heat Treatment of a ITER CS Model Coil Conductor Using Incoloy 908 Jacket
  4. Altmetric Badge
    Chapter 3 Mechanical Investigations on Aged Stainless Steel and Incoloy 908 Materials at 4.2 K and 7 K
  5. Altmetric Badge
    Chapter 4 Low-Temperature Tensile Properties of Fe-Ni Alloys
  6. Altmetric Badge
    Chapter 5 New Failure Prediction Model for a Ni-Fe Superalloy Sheath of Superconducting Fusion Magnets
  7. Altmetric Badge
    Chapter 6 A Study of Fracture Toughness and Microstructures in the Weld Heat-Affected Zone of QLT-Processed 9% Ni Steel
  8. Altmetric Badge
    Chapter 7 Fatigue Life Estimation of ITER Conduits at 4 K
  9. Altmetric Badge
    Chapter 8 Fracture Toughness and Tensile Behavior of Incoloy 908
  10. Altmetric Badge
    Chapter 9 Selection of Tokamak Toroidal Field Coil Case Structural Materials
  11. Altmetric Badge
    Chapter 10 Trial Fabrication of Heavy Section Base Metals and Welded Joints for ITER TF Coil
  12. Altmetric Badge
    Chapter 11 Fatigue Crack Growth Rate of SUS 316 and Weld Joint with Natural Crack at 7 K
  13. Altmetric Badge
    Chapter 12 Welding Consumable Development for a Cryogenic (4 K) Application
  14. Altmetric Badge
    Chapter 13 Nonequilibrium Segregation and Fracture Mechanism of High-Manganese Cryogenic Steels
  15. Altmetric Badge
    Chapter 14 Techniques for Automatic Autogenous Welding of Low Sulfur 316LN Beam Tube
  16. Altmetric Badge
    Chapter 15 Non-Equilibrium Segregation of Manganese in High-Mn Cryogenic Steels
  17. Altmetric Badge
    Chapter 16 A Study of Mechanical Properties and Weldability in Weldment of Cold-Rolled Fe-19Mn-5.5Cr-3.5Al-0.25C Alloy at Cryogenic Temperature
  18. Altmetric Badge
    Chapter 17 Strength, Ductility/Toughness and Fine-Blanking of Nonmagnetic High Mn Steel and Its Accelerator Superconducting Magnets Application
  19. Altmetric Badge
    Chapter 18 Effects of Stress Level in Pre-Cracking on Fracture Toughness of SUS 304L Steel in an 8 Tesla Magnetic Field at 4K
  20. Altmetric Badge
    Chapter 19 Fracture Toughness Evaluation of a Round Bar with a Circumferential Notch at Cryogenic Temperature
  21. Altmetric Badge
    Chapter 20 Fracture Mechanics Investigations at 7 K of Structural Materials with EDM Notched Round and Double Edged - Bars
  22. Altmetric Badge
    Chapter 21 Determining the Amount of ε-Martensite during Low-Temperature Deformation by a Resistometric Technique
  23. Altmetric Badge
    Chapter 22 Cryomechanics and Double-Notch Interlaminar Shear Strength of G-10Cr Glass-Cloth/Epoxy Laminates
  24. Altmetric Badge
    Chapter 23 Development of U.S./ITER CS Model Coil Turn Insulation
  25. Altmetric Badge
    Chapter 24 Effect of Applied Stress during Irradiation at 5 K on the Shear / Compression Strength of Bonded Specimens
  26. Altmetric Badge
    Chapter 25 The Interlaminar Shear Strength of FRPs under the Influence of Various Radiation Sources
  27. Altmetric Badge
    Chapter 26 Low Temperature Tensile and Shear/Tension Properties of Composite Materials with Electrically Insulating Barrier Films
  28. Altmetric Badge
    Chapter 27 Tests of Fill Fibers and Epoxy Resins for the Fabrication of Impregnated Superconducting Solenoids
  29. Altmetric Badge
    Chapter 28 Plasma Treatment of Composite Interface for Cryogenic Use
  30. Altmetric Badge
    Chapter 29 Aerogel-Based Cryogenic Superinsulation
  31. Altmetric Badge
    Chapter 30 Mechanical Properties of Zirconia and Silica at Cryogenic Temperature
  32. Altmetric Badge
    Chapter 31 Insulation for Wind and React High Temperature Superconducting Coils
  33. Altmetric Badge
    Chapter 32 A Composite Electrical Insulation in Superconducting Magnets
  34. Altmetric Badge
    Chapter 33 Free Volume and Cryogenic Properties of Hybrid Materials
  35. Altmetric Badge
    Chapter 34 Properties of Materials for Use in Liquid Hydrogen Containment Vessels
  36. Altmetric Badge
    Chapter 35 Failure Criterion of Glass/Epoxy Composites Used as Electrical Insulation for Large Superconducting Magnets
  37. Altmetric Badge
    Chapter 36 Vamas Round Robin Tests on Composite Material and Solder at Liquid Helium Temperature
  38. Altmetric Badge
    Chapter 37 Toughening of Epoxy Resin Systems for Cryogenic Use
  39. Altmetric Badge
    Chapter 38 Molecular Dynamic Simulation of Polymeric Materials at Cryogenic Temperature
  40. Altmetric Badge
    Chapter 39 Enhanced Creep of Epoxy Resin During Irradiation at Cryogenic Temperatures
  41. Altmetric Badge
    Chapter 40 Pop-in Phenomena in an Al-Li Alloy
  42. Altmetric Badge
    Chapter 41 Optimization Studies on High-Strength Ag -Cu Conductors
  43. Altmetric Badge
    Chapter 42 Fatigue-Induced Electrical Degradation of Composite High-Purity/High-Strength Aluminum Rings at 4 K
  44. Altmetric Badge
    Chapter 43 Low-Temperature Plastic Deformation and Resistivity of Coarse-Grain Pure Aluminum
  45. Altmetric Badge
    Chapter 44 Time-Resolved Flow Stress Behavior of Structural Materials at Low Temperatures
  46. Altmetric Badge
    Chapter 45 Problems Involved in Determining the Mechanical Properties of Solid Nitrogen and a Composite of Solid Nitrogen and Aluminum Foam (40 K – 61 K)
  47. Altmetric Badge
    Chapter 46 Simple Guarded Hot Plate Technique for Making Thermal Conductivity Measurements of Composite Materials at Cryogenic Temperatures
  48. Altmetric Badge
    Chapter 47 Thermal Contraction Coefficient Measurement Technique of Several Materials at Low Temperatures Using Electronic Speckle Pattern Interferometry
  49. Altmetric Badge
    Chapter 48 Thermal Conductivity of Sintered Nickel Films Obtained with the HVOF Technique
  50. Altmetric Badge
    Chapter 49 Low-Temperature Thermal, Dielectric, and Acoustic Properties of Amorphous Polymers
  51. Altmetric Badge
    Chapter 50 Oxygen Annealing of YBCO/Gold Thin-Film Contacts
  52. Altmetric Badge
    Chapter 51 Synthesis of RE (Gd, Sm, Nd) Ba 2 Cu 3 O 7−x Superconductors through the Diffusion Process
  53. Altmetric Badge
    Chapter 52 Development of Low- J c Applications of High- T c Superconductors Based on Extended Thick Films Sprayed on Metallic Substrates with the HVOF Technique
  54. Altmetric Badge
    Chapter 53 Fabrication of 10,000A/cm 2 Class Bi-2223 Sintered Bulk
  55. Altmetric Badge
    Chapter 54 Superconducting Butt Joint of Bi-2212/Ag Multi Filamentary Tapes
  56. Altmetric Badge
    Chapter 55 Studies of the Bi(2223) Phase Formation Mechanism in Pb Substituted and Pb Free Bulk Samples and in Ag Sheathed Tapes
  57. Altmetric Badge
    Chapter 56 Phase Equilibrium and Formation of Bi2223 Phase in PIT-Processed Tapes
  58. Altmetric Badge
    Chapter 57 The Formation Mechanism Of (Bi,Pb)-2223 Phase and a Pseudo-Binary Phase Diagram of (Bi,Pb)-Sr-Ca-Cu-O System
  59. Altmetric Badge
    Chapter 58 Growth of Transient Phases During Bi(2212) to Bi(2223) Transformation
  60. Altmetric Badge
    Chapter 59 Computer Simulations of Bi-2223 Sintered Bulk
  61. Altmetric Badge
    Chapter 60 The Influence of Metallic Interfaces on the Properties of Bulk (Hg,A)Ba 2 Ca 2 Cu 3 O x (A=Pb,Bi) Superconductors
  62. Altmetric Badge
    Chapter 61 Recent Improvements in Long Length Bi-2212 Conductors
  63. Altmetric Badge
    Chapter 62 Characteristics of the Ag-Sheathed Bi-2223 Multifilamentary Tapes Using Powder/Wire-in-Tube Technique
  64. Altmetric Badge
    Chapter 63 Synthesis and Processing of Doped Hg 1 Ba 2 Ca 2 Cu 3 O y Superconductors
  65. Altmetric Badge
    Chapter 64 Doping Effect on Partial-Melting of Hg x Ba 2 Ca 2 Cu 3 Re 0.2 O y Filament
  66. Altmetric Badge
    Chapter 65 Processing Considerations for Adding Nanometer-Scale Oxides to Enhance Flux Pinning in High-Temperature Superconductors
  67. Altmetric Badge
    Chapter 66 Synthesis of TlBa 2 Ca 2 Cu 3 O x Thick Layer on Metal Tapes Through the Diffusion Reaction
  68. Altmetric Badge
    Chapter 67 Formation of Porosity and Its Effects on the Uniformity of J c in Bi-2212/Ag Tapes
  69. Altmetric Badge
    Chapter 68 Improvement of Superconducting Properties on Bi 2 Sr 2 CaCu 2 O x Multilayer Superconducting Tape and It’s Application
  70. Altmetric Badge
    Chapter 69 Recent Advances in Processing of Ag-Clad Bi-2223 Superconductors
  71. Altmetric Badge
    Chapter 70 High Strain Warm Extrusion and Warm Rolling of Multifilamentary Bi-2223 Metallic Precursor Wire
  72. Altmetric Badge
    Chapter 71 Magnetic Properties of the YBaCuO-System Superconductors
  73. Altmetric Badge
    Chapter 72 Structure and Superconducting Properties of Bi-2212 Cylinders Prepared by Diffusion Process
  74. Altmetric Badge
    Chapter 73 Effect of 3221-Phase on Phase Formation and Superconducting Properties of Bi-2223/Ag Tapes
  75. Altmetric Badge
    Chapter 74 Effect of V Additions on Bi2223 Phase Formation and Superconducting Properties of (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O z
  76. Altmetric Badge
    Chapter 75 Critical Current and Strain Tolerance of Bi-2223/Ag Multifilament Tapes
  77. Altmetric Badge
    Chapter 76 AC Susceptibility and AC Loss in Bi-2223/Ag Superconducting Tapes
  78. Altmetric Badge
    Chapter 77 Theory of Cyclic Loss in a High- T c Superconductor
  79. Altmetric Badge
    Chapter 78 Sheath and Substrate Losses in High-T c Superconductors
  80. Altmetric Badge
    Chapter 79 Study on Reproducibility of Transport Critical Current for HTSC
  81. Altmetric Badge
    Chapter 80 Irreversibility and Vortex Glass-Liquid Transition Fields of Silver-Sheathed Bi-2212 Superconducting Tapes
  82. Altmetric Badge
    Chapter 81 Modeling the Flux Creep Characteristics of High- T c Superconductors
  83. Altmetric Badge
    Chapter 82 Electrical Resistivity of a High-Tc Superconductor for Electric Current Higher Than Ic
  84. Altmetric Badge
    Chapter 83 c-Direction Finite Voltage in Bi-based/Ag Multifilament Tapes
  85. Altmetric Badge
    Chapter 84 Computer Simulations of Large-Grain YBCO Properties
  86. Altmetric Badge
    Chapter 85 Comparison of Flux Bundle Size between Three-Dimensional Y-123 and Two-Dimensional Bi-2212 Superconductors
  87. Altmetric Badge
    Chapter 86 Magneto - Optical Observation of Magnetic Flux Penetration and Current Distribution in Y - Ba - Cu - O Single Crystals and Melt - Textured Ceramics
  88. Altmetric Badge
    Chapter 87 Investigations on BaO 2 Additions in Ag-Clad Bi 2 Sr 2 CaCu 2 O x Conductors
  89. Altmetric Badge
    Chapter 88 Mechanical Properties and Strain Effects in Bi 2 Sr 2 CaCu 2 O x /Ag Composite Conductors
  90. Altmetric Badge
    Chapter 89 Effect of Sheath Material on Structure and Properties of BPSCCO-2223 Conductors
  91. Altmetric Badge
    Chapter 90 The Influence of Pre-Existing Defects on the Bending Strain Behavior of Bi 2 Sr 2 Ca 1 Cu 2 O x and (Bi,Pb) 2 Sr 2 Ca 2 Cu 3 O x Ag-Sheathed Tapes
  92. Altmetric Badge
    Chapter 91 Transport Critical Current Density Distributions in Ag/Bi-2223 Tapes
  93. Altmetric Badge
    Chapter 92 Electro-Magnetic Analysis of High T c Superconductors Based on Anisotropic E - J Characteristics
  94. Altmetric Badge
    Chapter 93 Numerical Analysis on AC Transport Losses of High Temperature Superconducting Wires and Cables
  95. Altmetric Badge
    Chapter 94 AC Magnetic Field Losses in BSCCO-2223 Superconducting Tapes
  96. Altmetric Badge
    Chapter 95 Transport Current AC Losses of High-Tc Superconducting Tapes Exposed to AC Magnetic Field
  97. Altmetric Badge
    Chapter 96 Frequency Dependence of AC Transport Loss in Bi-2223/Ag Tapes
  98. Altmetric Badge
    Chapter 97 Evidence of Strong Relationship Between Carrier States in Fractional Quantum-Hall Effect and in High- Temperature Superconductivity Found in Dielectric Measurement of La 2−x Sr x CuO 4 Film
  99. Altmetric Badge
    Chapter 98 X-ray Diffraction Investigation in High Fields at Low Temperature for Nd 0.5 Sr 0.5 MnO 3
  100. Altmetric Badge
    Chapter 99 Miniaturized Multilayer Filters with YBa 2 Cu 3 O 7-δ on LaAlO 3 and MgO Substrates
  101. Altmetric Badge
    Chapter 100 The Anisotropic Characteristic on the Magnetic Stability of HTS Permanent Magnet
  102. Altmetric Badge
    Chapter 101 Magnet Conductor Development Using Bi-2223 High Temperature Superconducting Wire
  103. Altmetric Badge
    Chapter 102 Development of Strengthened Bundle High Temperature Superconductors
  104. Altmetric Badge
    Chapter 103 Development of Ag Sheathed Bi(2223) Tapes for Power Applications with Improved Homogeneity
  105. Altmetric Badge
    Chapter 104 Single and Three-Phase AC Losses in HTS Superconducting Power Transmission Line Prototype Cables
  106. Altmetric Badge
    Chapter 105 Development of Ag-Sheathed Bi2223 Superconducting Wires and Their Applications
  107. Altmetric Badge
    Chapter 106 Biaxially Aligned High Jc YBCO Tapes on YSZ Buffer Layers Deposited By IBAD Method
  108. Altmetric Badge
    Chapter 107 YBaCuO-Coated High-J c Conductors
  109. Altmetric Badge
    Chapter 108 YBCO Deposition by Thermal Evaporation
  110. Altmetric Badge
    Chapter 109 Fabrication of YBa 2 Cu 3 O x , Superconducting Tape by Continuous MOCVD Technique
  111. Altmetric Badge
    Chapter 110 Biaxially Aligned YBCO Film Tapes Fabricated by Inclined Substrate Pulsed Laser Deposition
  112. Altmetric Badge
    Chapter 111 Critical Currents and Superconducting Boundary Effects in S-N-S Multifilamentary Composites
  113. Altmetric Badge
    Chapter 112 Studies on Diffusional Decomposition and J c in a Strongly Deformed Nb-Ti Alloy
  114. Altmetric Badge
    Chapter 113 Influence of Thickness on Orientational Dependence of Critical Current Density of NbTi Thin Films
  115. Altmetric Badge
    Chapter 114 Developments in Low Temperature Superconductor Materials at Cabot Performance Materials
  116. Altmetric Badge
    Chapter 115 High Critical-Current Measurements in Liquid and Gaseous Helium
  117. Altmetric Badge
    Chapter 116 Superconducting Behaviour of Nb-Ti-12.3 wt.% Ta and Nb-Ti-20.4 wt.% Ta Multifilamentary Superconducting Wires
  118. Altmetric Badge
    Chapter 117 Development of Superconducting Joints for TWC High-J c Nb 3 Sn Wires for NMR Superconducting Magnet Applications
  119. Altmetric Badge
    Chapter 118 High-Field Performance of Nb 3 Sn Superconductors Prepared from Intermediate Compound
  120. Altmetric Badge
    Chapter 119 Development of Nb 3 Sn Wires Made by the Internal-Tin Process
  121. Altmetric Badge
    Chapter 120 A New Technique to Fabricate Multifilament Nb 3 Sn Superconductor Using Cabled Monocore Subelements
  122. Altmetric Badge
    Chapter 121 An Improved Method for Making High Field Critical Current Estimates and Its Application to High Current MJR Wires
  123. Altmetric Badge
    Chapter 122 Development of Superconducting High Current Density Large Diameter Internal Tin (Nb 3 Sn) Wires
  124. Altmetric Badge
    Chapter 123 Development of Bronze-Processed Nb 3 Sn Superconductors for 1GHz NMR Magnets
  125. Altmetric Badge
    Chapter 124 Improvement of Critical Current Density in the Bronze-Processed Nb 3 Sn Superconductor
  126. Altmetric Badge
    Chapter 125 High Critical Current Densities in Nb 3 Sn Films with Engineered Microstructures — Artificial Pinning Microstructures
  127. Altmetric Badge
    Chapter 126 Flux Pinning Mechanisms in Superconducting A15 Materials and the Optimization of Their Transport Properties
  128. Altmetric Badge
    Chapter 127 Characterization of High-Current Nb 3 Sn Cable-in-Conduit Conductors VS Applied Sheath Strain
  129. Altmetric Badge
    Chapter 128 On Excessive Resistance and Heat Generation of Aluminum Conductor Due to Magnetic Field Inhomogeneity
  130. Altmetric Badge
    Chapter 129 Electron Scattering Processes Anisotropy in Al-Y Dilute Alloys in Strong Magnetic Fields
  131. Altmetric Badge
    Chapter 130 The Critical Properties of Three A15 Multi-Filamentary Superconductors Changed by Axial Compression and Tension
  132. Altmetric Badge
    Chapter 131 Lorentz Force Simulation Tests on a Full-Scale Prototype Model Coil of the 45-T Hybrid Magnet
  133. Altmetric Badge
    Chapter 132 Determination of the Thermal and Mechanical Strain Behavior of NbTi/Cu Cable Embedded in an Aluminum Stabilizer
  134. Altmetric Badge
    Chapter 133 Dimensional Changes of Nb 3 Sn, Nb 3 Al and Bi 2 Sr 2 CaCu 2 O 8 Conductors During Heat Treatment and Their Implication for Coil Design
  135. Altmetric Badge
    Chapter 134 Experimental Checking of an Ac Losses Model for Superconducting Twisted Cable-In-Conduit
  136. Altmetric Badge
    Chapter 135 Investigation the Influence of the Nb 3 Sn Wire Design Parameters and Twist Pitch on Hysteresis Losses
  137. Altmetric Badge
    Chapter 136 Effect of Magnetic Field Direction on the Critical Current of Twisted Multifilamentary Superconducting Wires
  138. Altmetric Badge
    Chapter 137 Test Set-Up to Study Current Distribution in AC Multistrand Superconducting Cables
  139. Altmetric Badge
    Chapter 138 The Consequence of Self-Field and Non-Uniform Current Distribution on Short Sample Tests of Superconducting Cables
  140. Altmetric Badge
    Chapter 139 Review on Boundary-Induced Coupling Currents
  141. Altmetric Badge
    Chapter 140 Electrical Resistance of Superconducting Cable Splices
  142. Altmetric Badge
    Chapter 141 AC Loss and Contact Resistance in Nb 3 Sn Rutherford Cables With and Without a Stainless Steel Core
  143. Altmetric Badge
    Chapter 142 Factors Controlling the Onset of Proximity Effect Coupling (PEC) and the Influence of Pinning-Assisted Pec on M-H Loop Asymmetry in Multifilamentary Composites
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

wikipedia
1 Wikipedia page

Citations

dimensions_citation
5 Dimensions

Readers on

mendeley
12 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Cryogenic Engineering Materials
Published by
Springer Science & Business Media, November 2013
DOI 10.1007/978-1-4757-9056-6
ISBNs
978-1-4757-9056-6, 978-1-4757-9058-0
Editors

Balachandran, U. Balu, Gubser, Donald G., Hartwig, K. Ted, Reed, Richard P., Warnes, William H., Bardos, Victoria A.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 12 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 5 42%
Student > Ph. D. Student 4 33%
Researcher 2 17%
Other 1 8%
Readers by discipline Count As %
Engineering 5 42%
Materials Science 4 33%
Earth and Planetary Sciences 1 8%
Energy 1 8%
Unknown 1 8%