↓ Skip to main content

Experimental and Applied Mechanics, Volume 4

Overview of attention for book
Cover of 'Experimental and Applied Mechanics, Volume 4'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing
  3. Altmetric Badge
    Chapter 2 Deformation Mapping at the Microstructural Length Scale
  4. Altmetric Badge
    Chapter 3 Molecular Tailoring of Interfacial Adhesion Using Self-Assembled Monolayers
  5. Altmetric Badge
    Chapter 4 Micromechanical Characterization of Ductile Damage in DP Steel
  6. Altmetric Badge
    Chapter 5 MEMS Device for Fatigue Testing of 25 μm Thick Aluminum Specimens
  7. Altmetric Badge
    Chapter 6 High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams
  8. Altmetric Badge
    Chapter 7 High Strain Rate Characteristics of Fiber Bragg Grating Strain Sensors
  9. Altmetric Badge
    Chapter 8 Dynamic Shape and Strain Measurements of Rotating Tire in Time-Series
  10. Altmetric Badge
    Chapter 9 Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions
  11. Altmetric Badge
    Chapter 10 Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings
  12. Altmetric Badge
    Chapter 11 Stress Intensity Factors for Viscoelastic Axisymmetric Problems Applied to Wood
  13. Altmetric Badge
    Chapter 12 Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers
  14. Altmetric Badge
    Chapter 13 Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions
  15. Altmetric Badge
    Chapter 14 Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137
  16. Altmetric Badge
    Chapter 15 Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing
  17. Altmetric Badge
    Chapter 16 Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired with a CFRE Composite System
  18. Altmetric Badge
    Chapter 17 Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083
  19. Altmetric Badge
    Chapter 18 Load History Dependency of Plastic Collapse Behavior of Cracked Piping
  20. Altmetric Badge
    Chapter 19 Production of Metal Matrix Composites Using Thixoinfiltration Techniques
  21. Altmetric Badge
    Chapter 20 Use of Vision-Based Methods for Measurement of Mechanical Properties of Exhaust Catalysts
  22. Altmetric Badge
    Chapter 21 Review of Methods for Determining Residual Stresses in Biological Materials
  23. Altmetric Badge
    Chapter 22 A Comparison of Residual Stress Measurements on a Linear Friction Weld Using the Contour Method and Neutron Diffraction
  24. Altmetric Badge
    Chapter 23 Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)
  25. Altmetric Badge
    Chapter 24 Very High-Cycle Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys
  26. Altmetric Badge
    Chapter 25 The Application of the Combined Creep and Rate-Independent Plasticity Model to Turbine Components Life Prediction
  27. Altmetric Badge
    Chapter 26 Modified Constitutive Relation Error Strategy for Elastic Properties Identification
  28. Altmetric Badge
    Chapter 27 Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains
  29. Altmetric Badge
    Chapter 28 Cohesive Zone Law Extraction from an Experimental Peel Test
  30. Altmetric Badge
    Chapter 29 Application of a New Experimental Method to Determine Bi-Material Interface Bonding Strength
  31. Altmetric Badge
    Chapter 30 Calibration of Barkhausen Noise for Residual Stress Measurement
  32. Altmetric Badge
    Chapter 31 Film Residual Stress Assessment Method via Temporarily Thermal Relaxation
  33. Altmetric Badge
    Chapter 32 Determining Residual Stresses with the Aid of Optical Interference Techniques
  34. Altmetric Badge
    Chapter 33 Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings
  35. Altmetric Badge
    Chapter 34 Design of Ultrasonic Probe Configuration Using Finite-Difference Time Domain Simulation
  36. Altmetric Badge
    Chapter 35 Absorbed Versus Released Energy in the Cracking Process of Heterogeneous Materials Under Compression
  37. Altmetric Badge
    Chapter 36 Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints
  38. Altmetric Badge
    Chapter 37 Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls
  39. Altmetric Badge
    Chapter 38 Modelling of Nosing for the Assembly of Aerospace Bearings
  40. Altmetric Badge
    Chapter 39 Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly
  41. Altmetric Badge
    Chapter 40 Development of a Test Simulator to Perform Optimized Experiment Design
  42. Altmetric Badge
    Chapter 41 Simplified Calculation Method of the Torsion Effect on the Seismic Behaviour of Timber Building
  43. Altmetric Badge
    Chapter 42 Experimental Analysis of Semi-rigidity Joint in the Standardized Timber Beam
  44. Altmetric Badge
    Chapter 43 Nano-Macro Correlation of Nano-Silica Concrete
  45. Altmetric Badge
    Chapter 44 Experimental Results of Green Wood Slice Under Natural Drying
  46. Altmetric Badge
    Chapter 45 Thickness Effect on Cross-Ply GLARE 5 FML Beams Subjected to Ballistic Impact
  47. Altmetric Badge
    Chapter 46 Hole-Drilling Residual Stress Measurement in an Intermediate Thickness Specimen
  48. Altmetric Badge
    Chapter 47 Effects of Strain’s Error on Residual Stresses Calculated by HDM
  49. Altmetric Badge
    Chapter 48 Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC
  50. Altmetric Badge
    Chapter 49 Anisotropic and Pressure-Dependent Plasticity Modeling for Residual Stress Prediction
  51. Altmetric Badge
    Chapter 50 Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

news
1 news outlet
twitter
1 X user

Readers on

mendeley
13 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Experimental and Applied Mechanics, Volume 4
Published by
Springer, New York, NY, January 2013
DOI 10.1007/978-1-4614-4226-4
ISBNs
978-1-4614-4225-7, 978-1-4614-4226-4
Editors

Carlos E. Ventura, Wendy C. Crone, Cosme Furlong

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 13 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 13 100%

Demographic breakdown

Readers by professional status Count As %
Professor 1 8%
Student > Ph. D. Student 1 8%
Researcher 1 8%
Unknown 10 77%
Readers by discipline Count As %
Unspecified 1 8%
Materials Science 1 8%
Engineering 1 8%
Unknown 10 77%