↓ Skip to main content

Vibration Engineering and Technology of Machinery

Overview of attention for book
Cover of 'Vibration Engineering and Technology of Machinery'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Ancient Temple Carts—Modifications for Structure and Steering
  3. Altmetric Badge
    Chapter 2 The Rise and Fall of the Rotor Blade Strain Gauge
  4. Altmetric Badge
    Chapter 3 Managing Life Extension for Large Rotating Plant in Power Stations
  5. Altmetric Badge
    Chapter 4 Recent Advances and Prospects in Condition Monitoring
  6. Altmetric Badge
    Chapter 5 Vibration Engineering and Technology of Machinery
  7. Altmetric Badge
    Chapter 6 Composite Shaft Rotor Dynamics: An Overview
  8. Altmetric Badge
    Chapter 7 Investigation of the Synchronous Response in a Back-Back Centrifugal Compressor Due to Imbalance and Seal Distortion
  9. Altmetric Badge
    Chapter 8 Comparison of On-Bearing and On-Casing Vibration for Blade Health Monitoring in Rotating Machine
  10. Altmetric Badge
    Chapter 9 Vibration-Based Condition Monitoring for Rotating Machinery with Different Flexible Supports
  11. Altmetric Badge
    Chapter 10 Off-Line Crack Detection in Rotors
  12. Altmetric Badge
    Chapter 11 Application of Composite Spectrum in Steam Turbo-Generator Set
  13. Altmetric Badge
    Chapter 12 Coherent Composite HOS Analysis of Rotating Machines with Different Support Flexibilities
  14. Altmetric Badge
    Chapter 13 Vibration Behaviour of a Turbo-Generator Set
  15. Altmetric Badge
    Chapter 14 A Comparison Between Hilbert Transform and a New Method for Signal Enveloping
  16. Altmetric Badge
    Chapter 15 The Detection of Shaft Misalignments Using Motor Current Signals from a Sensorless Variable Speed Drive
  17. Altmetric Badge
    Chapter 16 Analysis of SGTF Vertical Sodium Pump Using ARMD
  18. Altmetric Badge
    Chapter 17 Qualification of Large Structures for Shock Loads
  19. Altmetric Badge
    Chapter 18 Hybrid Viscous-Structural Damping Identification Method
  20. Altmetric Badge
    Chapter 19 Effectiveness of Adaptive Filter Algorithms and Spectral Kurtosis in Bearing Faults Detection in a Gearbox
  21. Altmetric Badge
    Chapter 20 Pitting Detection in Worm Gearboxes with Vibration Analysis
  22. Altmetric Badge
    Chapter 21 Impact Vibrations of Ultrasonic Multi-striker Hand Tool
  23. Altmetric Badge
    Chapter 22 Vibration Engineering and Technology of Machinery
  24. Altmetric Badge
    Chapter 23 Vibration Engineering and Technology of Machinery
  25. Altmetric Badge
    Chapter 24 Vibration Engineering and Technology of Machinery
  26. Altmetric Badge
    Chapter 25 Synthesis of Vibration Gear Continuously Variable Transfer
  27. Altmetric Badge
    Chapter 26 Crack Propagation in a 500 MW LP Turbine in Service
  28. Altmetric Badge
    Chapter 27 Effect of Ultrasonic Oscillations on the Interaction of al with Ga-In Eutectic Alloy
  29. Altmetric Badge
    Chapter 28 Nonlinear Control of an Aeroelastic System with a Non-smooth Structural Nonlinearity
  30. Altmetric Badge
    Chapter 29 A Block Decoupling Control Algorithm for Vibration Suppression of Linear Structures
  31. Altmetric Badge
    Chapter 30 Measurement and Simulation of the Vibroacoustic Performance of an Electric Motor
  32. Altmetric Badge
    Chapter 31 Forced Vibration of Eight Mistuned Bladed Disks on a Solid Shaft—Excitation of the First Compressor Bladed Disc
  33. Altmetric Badge
    Chapter 32 Dynamic Analysis of Parametrically Excited Piezoelectric Bimorph Beam for Energy Harvesting
  34. Altmetric Badge
    Chapter 33 About Multi-parametric Analysis of Drill String Vibrations
  35. Altmetric Badge
    Chapter 34 Tuned Mass Damper Inverted Pendulum to Reduce Offshore Wind Turbine Vibrations
  36. Altmetric Badge
    Chapter 35 Vibration Control of Active Vehicle Suspension System Using Fuzzy Logic Controller
  37. Altmetric Badge
    Chapter 36 Two-Stage Data Driven Filtering for Local Damage Detection in Presence of Time Varying Signal to Noise Ratio
  38. Altmetric Badge
    Chapter 37 Energy Harvesting from Near Periodic Structures
  39. Altmetric Badge
    Chapter 38 Dynamic Analysis of Multilayered Sandwich Beam with MRE Core
  40. Altmetric Badge
    Chapter 39 Analysis of Coupled Transverse and Axial Vibrations of Euler Bernoulli and Timoshenko Beams with Longitudinal Crack for Its Detection
  41. Altmetric Badge
    Chapter 40 Detection of Arbitrary Number of New Cracks Appearing in a Beam with Pre-existing Cracks
  42. Altmetric Badge
    Chapter 41 Acoustic Technique for Diverse Safety Rod Drop Time Measurement in PFBR
  43. Altmetric Badge
    Chapter 42 Large Amplitude Free Vibration Analysis of Axially Functionally Graded Tapered Rotating Beam by Energy Method
  44. Altmetric Badge
    Chapter 43 A Frequency-Based Criterion for Automatic Selection of the Optimal Intrinsic Mode Function in Diagnostics of Localized Gear Tooth Faults
  45. Altmetric Badge
    Chapter 44 Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development
  46. Altmetric Badge
    Chapter 45 Effects of Monograde and Multigrade Oils on the Friction Force in Four-Stroke Motor Engine: An Experimental and Analytical Approach
  47. Altmetric Badge
    Chapter 46 Delamination Detection in a Laminated Composite Beam Based on Changes in Natural Frequencies
  48. Altmetric Badge
    Chapter 47 Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps Based on Vibration and Pressure Measurements
  49. Altmetric Badge
    Chapter 48 Robustness Evaluation of Adhesively Bonded Ceramic Quad Flat Chips for Space Applications
  50. Altmetric Badge
    Chapter 49 Coupling Analysis for the Thermo-Acoustic-Vibration Response of a Thin-Walled Box
  51. Altmetric Badge
    Chapter 50 Chatter Detection in CNC Milling Processes Based on Wiener-SVM Approach and Using Only Motor Current Signals
  52. Altmetric Badge
    Chapter 51 Dynamics of the Unbalanced Support Centrifuge with Cavity Partially Filled with a Multiphase Liquid Medium
  53. Altmetric Badge
    Chapter 52 Design and Test of a Piezoelectric Inertial Mass Actuator for Active Vibration Control
  54. Altmetric Badge
    Chapter 53 Heat Transfer and Thermoelastic Dynamics of a Rotating Flexible Disc in a Hard Disc Drive
  55. Altmetric Badge
    Chapter 54 A New Direct Method for Updating Mass and Stiffness Matrices with No Spillover
  56. Altmetric Badge
    Chapter 55 Wave Propagation in a Honeycomb Composite Sandwich Structure in the Presence of High-Density Core Using Bonded PZT-Sensors
  57. Altmetric Badge
    Chapter 56 Health Monitoring of Stiffened Metallic Plates Using Nonlinear Wave Interaction and Embedded PZT Transducers
  58. Altmetric Badge
    Chapter 57 Using Roving Disc and Natural Frequency Curves for Crack Detection in Rotors
  59. Altmetric Badge
    Chapter 58 Vibration Based Diagnosis of Distributed Bearing Faults
  60. Altmetric Badge
    Chapter 59 Freight Car Roller Bearing Fault Detection Using Artificial Neural Networks and Support Vector Machines
  61. Altmetric Badge
    Chapter 60 Light Rotor-Stator Partial Rub Characterization Using Instantaneous Angular Speed Measurement
  62. Altmetric Badge
    Chapter 61 Sequential Recurrence Analysis of Experimental Time Series of a Rotor Response with Bearing Outer Race Faults
  63. Altmetric Badge
    Chapter 62 Adhesive Layer Influence on Compressive and Tension Stiffness of Thin-Layer Rubber-Metal Elements
  64. Altmetric Badge
    Chapter 63 Multi Speed Model Updating of Rotor Systems
  65. Altmetric Badge
    Chapter 64 Vibration Control of Semi-active MR Seat Suspension for Commercial Vehicles Using Genetic PID Controller
  66. Altmetric Badge
    Chapter 65 Identification of Hysteretic Behavior of Magnetorheological Dampers Using NLARX Model
  67. Altmetric Badge
    Chapter 66 Online Roundness Error Identification and Model-Based Monitoring for Rotors
  68. Altmetric Badge
    Chapter 67 Study on Dynamic Load Sharing Characteristics of Double-Row Planetary Gear Train
  69. Altmetric Badge
    Chapter 68 A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node
  70. Altmetric Badge
    Chapter 69 Vibrational Characteristics of a Cracked Rotor Subjected to Periodic Auxiliary Axial Excitation
  71. Altmetric Badge
    Chapter 70 Parametric Modeling of Main Excitation Sources on Board Vessels
  72. Altmetric Badge
    Chapter 71 Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive
  73. Altmetric Badge
    Chapter 72 Analysis of Locally Nonlinear Two Dimensional Periodic Structures Using NOFRFs
  74. Altmetric Badge
    Chapter 73 Research on Multi-correlative Subsystems Analysis for Vibration Source Identification
  75. Altmetric Badge
    Chapter 74 A Nut-Type Ultrasonic Motor Driven with Single Phase Signal
  76. Altmetric Badge
    Chapter 75 Theoretical and Experimental Investigation into ‘Efficient Modal Control Strategies’ as Applied on a Plate Structure
  77. Altmetric Badge
    Chapter 76 Smart Machines with Flexible Rotors
  78. Altmetric Badge
    Chapter 77 Vibration Localization of Rotationally Periodic Structures
  79. Altmetric Badge
    Chapter 78 Forward and Backward Whirling of a Rotor with Gyroscopic Effect
  80. Altmetric Badge
    Chapter 79 Analysis of Nonlinear Dynamic Second-Order Effect of a Large-Scale Container Crane Under Seismic Excitations
  81. Altmetric Badge
    Chapter 80 Predictive Coefficient Method for Establishing Similarity Model of Jumbo Container Cranes
  82. Altmetric Badge
    Chapter 81 Stability and Bifurcation Analysis of an Axially Accelerating Beam
  83. Altmetric Badge
    Chapter 82 Analysis of Indirect Measurement of Cutting Forces Turning Metal Cylindrical Shells
  84. Altmetric Badge
    Chapter 83 Hybrid Permanent Magnet and Foil Bearing System for Complete Passive Levitation of Rotor
  85. Altmetric Badge
    Chapter 84 Amplitude Demodulation of Instantaneous Angular Speed for Fault Detection in Multistage Gearbox
  86. Altmetric Badge
    Chapter 85 Experimental Grey Box Model Identification and Control of an Active Gas Bearing
  87. Altmetric Badge
    Chapter 86 Vibration Engineering and Technology of Machinery
  88. Altmetric Badge
    Chapter 87 Effect of Structural Dynamics on the Shaft Line Rotor Response in Turbomachines
  89. Altmetric Badge
    Chapter 88 Nonstationary Processes Studying Based on “Caterpillar”—SSA Method
  90. Altmetric Badge
    Chapter 89 Vibration Measurements on PFBR Fuel Subassemblies
  91. Altmetric Badge
    Chapter 90 Multiple Fault Classification Using Support Vector Machine in a Machinery Fault Simulator
  92. Altmetric Badge
    Chapter 91 A Method for Vibro-Acoustic FE Model Updating of Cavities Using Frequency Response
  93. Altmetric Badge
    Chapter 92 Experimental and Numerical Study of Friction-Induced Noise of Brake Pad Materials Having Grooved Surface
  94. Altmetric Badge
    Chapter 93 Neural Network Modeling of Submarine Shell
  95. Altmetric Badge
    Chapter 94 Novel Approach for Structural Dynamic Topology Optimizations Based on Power Flow Mode Theory
  96. Altmetric Badge
    Chapter 95 Accurate Calculation of the Phase Shift Angle of Sinusoidal Signals Using Trapezoidal Rule
  97. Altmetric Badge
    Chapter 96 Effect of the Rail Support Stiffness on the Occurrence Propensity of Rail Corrugation Based on the Self-excited Vibration of a Wheel-Rail System
  98. Altmetric Badge
    Chapter 97 Modeling and Dynamic Force Simulation for Detection of Profile Error in Spur Gear Pair
  99. Altmetric Badge
    Chapter 98 Availability Improvement by Early Detection of Motor Bearing Failure Using Comprehensive Condition Monitoring Techniques at DTPS
  100. Altmetric Badge
    Chapter 99 Base Isolator of Vertical Seismic Vibration Using a Negative Stiffness Mechanism
  101. Altmetric Badge
    Chapter 100 A Novel Piezoelectric Rotational Speed Meter
  102. Altmetric Badge
    Chapter 101 A New Linear Motor with Two Piezoelectric Stacks Based on Differential Friction Effects
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
3 X users
patent
1 patent

Readers on

mendeley
196 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Vibration Engineering and Technology of Machinery
Published by
Springer, August 2014
DOI 10.1007/978-3-319-09918-7
ISBNs
978-3-31-909918-7, 978-3-31-909917-0
Editors

Sinha, Jyoti K.

X Demographics

X Demographics

The data shown below were collected from the profiles of 3 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 196 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Brazil 1 <1%
United Kingdom 1 <1%
Singapore 1 <1%
Belgium 1 <1%
Denmark 1 <1%
Unknown 191 97%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 56 29%
Student > Master 32 16%
Student > Doctoral Student 18 9%
Researcher 13 7%
Student > Postgraduate 8 4%
Other 29 15%
Unknown 40 20%
Readers by discipline Count As %
Engineering 130 66%
Computer Science 2 1%
Chemical Engineering 2 1%
Arts and Humanities 2 1%
Agricultural and Biological Sciences 1 <1%
Other 8 4%
Unknown 51 26%