↓ Skip to main content

Characterization of Minerals, Metals, and Materials 2016

Overview of attention for book
Cover of 'Characterization of Minerals, Metals, and Materials 2016'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Effect of Microstructural Anisotropy on the Dynamic Mechanical Behaviour of Rolled Ti-6Al-4V
  3. Altmetric Badge
    Chapter 2 Microstructure Evolution during Thermal Aging of Inconel 718
  4. Altmetric Badge
    Chapter 3 Microstructure Characterization of Nickel Alloy 718 with Automated Optical Image Processing
  5. Altmetric Badge
    Chapter 4 An Empirical Equation to Predict the Porosity of Titanium Foams
  6. Altmetric Badge
    Chapter 5 Microstructure of Metal Injection Molded MIM418 Using Master Alloy Technique
  7. Altmetric Badge
    Chapter 6 Effect of Poisson’s Ratio on Stress/Strain Concentration at Circular Holes in Elastic Plates Subjected to Biaxial Loading — Three Dimensional Finite Element Analysis
  8. Altmetric Badge
    Chapter 7 Methodology for Determining Spall Damage Mode Preference in Shocked FCC Polycrystalline Metals from 3D X-Ray Tomography Data
  9. Altmetric Badge
    Chapter 8 Mineralogical Analysis of Nickel/Copper Polymetallic Sulfide Ore by X-Ray Diffraction Using Rietveld Method
  10. Altmetric Badge
    Chapter 9 Study on Coal Minerals Phase Transformations Under Different Coking Conditions
  11. Altmetric Badge
    Chapter 10 Electrical Effect and Influence Factors of Tourmaline
  12. Altmetric Badge
    Chapter 11 Wettability of Pyrolytic Graphite by Molten Blast Furnace Slag Bearing TiO 2
  13. Altmetric Badge
    Chapter 12 Removing Silica and Alumina from Limonite Using Wet High Gradient Magnetic Separator
  14. Altmetric Badge
    Chapter 13 Evaluation of White Bentonite Modified by Acid Attack
  15. Altmetric Badge
    Chapter 14 Characterization of Iron Oxide Scale Formed in Naphthenic Acid Corrosion
  16. Altmetric Badge
    Chapter 15 Effect of Cold Work on the Corrosion Resistance of an Austenitic Stainless Steel
  17. Altmetric Badge
    Chapter 16 Pyrolysis of Active Fraction of Humic Substances-Based Binder for Iron Ore Pelletizing
  18. Altmetric Badge
    Chapter 17 Ferronickel Preparation from Nickeliferous Laterite by Rotary Kiln-Electric Furnace Process
  19. Altmetric Badge
    Chapter 18 Characterization of Copper-Manganese-Aluminum-Magnesium Mixed Oxyhydroxide and Oxide Catalysts for Redox Reactions
  20. Altmetric Badge
    Chapter 19 Discussion on Coking Wastewater Treatment and Control Measures in Iron and Steel Enterprises
  21. Altmetric Badge
    Chapter 20 Effect of MgO and Basicity on Microstructure and Metallurgical Properties of Iron Ore Sinter
  22. Altmetric Badge
    Chapter 21 Material Characterization of Power Plant Steel in the Virgin and Artificially-Aged Conditions
  23. Altmetric Badge
    Chapter 22 Site-Specific Studies on the Interfacial Structures of Galvanized Dual Phase Steels
  24. Altmetric Badge
    Chapter 23 Metallurgy and Creep Behavior of Type 310S Stainless Steel at High Temperature in Different Atmospheres and Loading Conditions
  25. Altmetric Badge
    Chapter 24 Characterization of Humic Acid Modified Bentonite Binder for Iron Ore Pelletization
  26. Altmetric Badge
    Chapter 25 Optimization of Material Properties of High Strength Multiphase Steels via Microstructure and Phase Transformation Adjustment
  27. Altmetric Badge
    Chapter 26 Formulation of Ceramic Body to Produce Roofing Tiles Using Winkler Diagram
  28. Altmetric Badge
    Chapter 27 FTIR Spectroscopy of Some Brazilian Clays
  29. Altmetric Badge
    Chapter 28 Preparation and Characterization of Microcapsules from PBSL/VMF2 Nanocomposite
  30. Altmetric Badge
    Chapter 29 Thermal Properties of Polypropylene Nanocomposites with Organoclay and Discarded Bond Paper
  31. Altmetric Badge
    Chapter 30 Incorporation of Waste Ceramic Blocks in Structural Ceramics
  32. Altmetric Badge
    Chapter 31 Solidification of Dredged Sludge by Hydraulic Ash-Slag Cementitious Materials
  33. Altmetric Badge
    Chapter 32 Synthesis and Characteristics of Anorthite Ceramics from Steelmaking Slag
  34. Altmetric Badge
    Chapter 33 Tensile Strength Tests in Epoxy Composites with High Incorporation of Malva Fibers
  35. Altmetric Badge
    Chapter 34 Microstructural Characteristics of Reaction-Bonded B 4 C/SiC Composite
  36. Altmetric Badge
    Chapter 35 Analysis of Methanol Sensitivity on SnO 2 -ZnO Nanocomposite
  37. Altmetric Badge
    Chapter 36 Experimental Study on Quality Evaluation of Calcium-Based Agents for Desulfurization of Sinter Gas on SDA
  38. Altmetric Badge
    Chapter 37 Kinetic Studies for the Absorption of Organic Matter from Purified Solution of Zinc by Coconut Shell Activated Carbon
  39. Altmetric Badge
    Chapter 38 Recovery of Palladium from Spent Pd/Al 2 O 3 Catalyst by Hydrochloric Acid Leaching
  40. Altmetric Badge
    Chapter 39 Prevention of Airborne Dust from Petroleum Coke Stockpiles
  41. Altmetric Badge
    Chapter 40 Ligand Selection Model for Leaching of Low Grade Zinc Oxide Ores
  42. Altmetric Badge
    Chapter 41 Studies on Leaching of Oxidized Copper Ore from South America
  43. Altmetric Badge
    Chapter 42 Effect of Ferric Ions on Bioleaching of Pentlandite Concentrate
  44. Altmetric Badge
    Chapter 43 Characterization and Stoichiometry of the Cyanidation Reaction in NaOH of Argentian Waste Tailings of Pachuca, Hidalgo, México
  45. Altmetric Badge
    Chapter 44 Tensile Strength of Polyester Composites Reinforced with Thinner Ramie Fibers
  46. Altmetric Badge
    Chapter 45 Charpy Impact Tests of Polyester Composites Reinforced with PALF Fibers
  47. Altmetric Badge
    Chapter 46 Dynamic-Mechanical Characterization of Polyester Matrix Composites Reinforced with Eucalyptus Fibers
  48. Altmetric Badge
    Chapter 47 Flexural Mechanical Characterization of Polyester Composites Reinforced with Ramie Fibers
  49. Altmetric Badge
    Chapter 48 Tensile Strength of Epoxy Composites Reinforced with Fique Fibers
  50. Altmetric Badge
    Chapter 49 Thermal Analysis of Curaua Fiber Reinforced Epoxy Matrix Composites
  51. Altmetric Badge
    Chapter 50 Characterization of Thermal Behavior of Epoxy Composites Reinforced with Curaua Fibers by Differential Scanning Calorimetry
  52. Altmetric Badge
    Chapter 51 Comparative Study of the Effects of Cellulose Nanowhiskers and Microcrystalline Cellulose Addition as Reinforcement in Flexible Films Based on Biopolymer Blends
  53. Altmetric Badge
    Chapter 52 Flexural Test in Epoxy Matrix Composites Reinforced with Hemp Fiber
  54. Altmetric Badge
    Chapter 53 The Influence of Heat Treatment on the Optical Parameters of Spray-Deposited CdS:In Thin Films
  55. Altmetric Badge
    Chapter 54 Determination of the Stability Constants of Mixed-Ligand Coordination Compounds in the Zn(II)-Nitrilotriacetic Acid-Ammonia System
  56. Altmetric Badge
    Chapter 55 Resonances of Microwave Power Absorption in Alumina and Silicon Carbide
  57. Altmetric Badge
    Chapter 56 Physical and Chemical Properties of MSWI Fly ash
  58. Altmetric Badge
    Chapter 57 Influence of Al and C on Mechanical Properties of Sub-Rapidly Solidified Fe-20Mn-xAl-yC Low-Density Steels
  59. Altmetric Badge
    Chapter 58 Dynamic Deep Etching and Particle Extraction for High-Strength Aluminum Alloys
  60. Altmetric Badge
    Chapter 59 Optimization of TiN P /Ti Content for Si 3 N 4 /42CrMo Joints Brazed With Ag-Cu-Ti+TiN P Composite Filler
  61. Altmetric Badge
    Chapter 60 Tribological Testing, Analysis and Characterization of D.C. Magnetron Sputtered Ti-Nb-N Thin Film Coatings on Stainless Steel
  62. Altmetric Badge
    Chapter 61 Assimilation Reaction Characteristic Number for Evaluating the Assimilation of Iron Ore in Sintering
  63. Altmetric Badge
    Chapter 62 Experimental Study of Advanced Treatment of Coking Wastewater Using MBR-RO Combined Process
  64. Altmetric Badge
    Chapter 63 Small Punch Creep Test in a 316 Austenitic Stainless Steel
  65. Altmetric Badge
    Chapter 64 Effect of Phase Transformations on Hardness in Zn-Al-Cu Alloys
  66. Altmetric Badge
    Chapter 65 Recovery of Palladium and Aluminum from Spent Catalysts by Roasting-Leaching
  67. Altmetric Badge
    Chapter 66 Preparation of Polymeric Phosphate Ferric Sulfate Flocculant and Application on Coking Wastewater Treatment
  68. Altmetric Badge
    Chapter 67 Characterization of Incorporation the Glass Waste in Adhesive Mortar
  69. Altmetric Badge
    Chapter 68 Characterization of a Mineral of the District of Zimapan, Mina Concordia, Hidalgo, for the Viability of the Recovery of Tungsten
  70. Altmetric Badge
    Chapter 69 Mechanical Properties and Microstructure of K418 Using Master Alloy Technique and Mechanical Alloy
  71. Altmetric Badge
    Chapter 70 Passive Films Formed on Stainless Steels in Phosphate Buffer Solution
  72. Altmetric Badge
    Chapter 71 Effect of the Paper Industry Residue on Properties in the Fresh Mortar
  73. Altmetric Badge
    Chapter 72 Brillouin Scattering Spectroscopy on Mg-Nd Alloy in Different Aging Time
  74. Altmetric Badge
    Chapter 73 The Characterization of the Desulfurization Powder in the Semi-Dry DE-SO 2 Process of the Sintering Plant Exhaust Gas and its Interaction with the Soil Particles
  75. Altmetric Badge
    Chapter 74 Direct Synthesis of Carbon Nanotubes at Low Temperature by the Reaction of CCl 4 and Ferrocene
  76. Altmetric Badge
    Chapter 75 Effect of Magnesium Aluminate Spinel Content on Properties of BN Based Composites
  77. Altmetric Badge
    Chapter 76 Silver Cementation with Zinc From Residual X Ray Fixer, Experimental and Thermochemical Study
  78. Altmetric Badge
    Chapter 77 Characterization of Waste Molding Sands, for Their Possible Use as Building Material
  79. Altmetric Badge
    Chapter 78 Improvement of Mechanical Properties in Natural Rubber with Organic Fillers
  80. Altmetric Badge
    Chapter 79 Speciation and Characterization of E-Waste, Using Analytical Techniques
  81. Altmetric Badge
    Chapter 80 Development of Bio-Based Foams Prepared from Pbat/Pla Reinforced with Bio-Calcium Carbonate Compatibilized by Electron-Beam Radiation
  82. Altmetric Badge
    Chapter 81 Microstructure Analysis of Buildups Embedded in Carbon Sleeve in Continuous Annealing Furnace for Non-Oriented Silicon Steel
  83. Altmetric Badge
    Chapter 82 Properties of Clay for Ceramics with Rock Waste for Production Structural Block by Pressing and Firing
  84. Altmetric Badge
    Chapter 83 Properties of Mortars with Partial and Total Replacement of Conventional Aggregate by Waste Construction
  85. Altmetric Badge
    Chapter 84 Effects of Graphene Oxide Addition on Mechanical and Thermal Properties of Evoh Films
  86. Altmetric Badge
    Chapter 85 Evaluation of Physico-Chemical Properties When Adding Boiler Ashes to Mortar
  87. Altmetric Badge
    Chapter 86 Significance of Graphitic Surfaces in Aurodicyanide Adsorption by Activated Carbon: Experimental and Computational Approach
  88. Altmetric Badge
    Chapter 87 Clinker Production from Wastes of Cellulose and Granite Industries
  89. Altmetric Badge
    Chapter 88 Effects of Carbon Black Incorporation on Morphological, Mechanical and Thermal Properties of Biodegradable Films
  90. Altmetric Badge
    Chapter 89 Influence of Inoculation on Structure of Chromium Cast Iron
  91. Altmetric Badge
    Chapter 90 Characterization of Irradiated and Non-Irradiated Rubber from Automotive Scrap Tires
  92. Altmetric Badge
    Chapter 91 Properties of Ceramic Pigment Zn 0.5 Cu 0.5 Cr 2 O 4 Synthesized by Solution Combustion Method
  93. Altmetric Badge
    Chapter 92 Evaluation of Environmental Aging of Polypropylene Irradiated Versus Pristine
  94. Altmetric Badge
    Chapter 93 Interface Reaction Between Y 2 O 3 Doped BaZrO 3 and TiNi Melt
  95. Altmetric Badge
    Chapter 94 Hydration Resistance of Y 2 O 3 Doped CaO and Its Application to Melting Titanium Alloys
  96. Altmetric Badge
    Chapter 95 Shear Displacement and Actual Strain During Chip Segmentation When Cutting Aerospace Alloy Ti-5553
  97. Altmetric Badge
    Chapter 96 Surface Behavior of Iron Sulfide Ore during Grinding with Alumina Media
  98. Altmetric Badge
    Chapter 97 Zinc Chloride Influence on The Resins Furan Polymerization to Foundry Moulds
  99. Altmetric Badge
    Chapter 98 Characterization of Gamma-Alumina Obtained from Aged Pseudoboehmites
  100. Altmetric Badge
    Chapter 99 Microstructure, Mechanical and Oxidation Behavior of Niobium Modified 9% Chromium Steel
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

news
1 news outlet
twitter
10 X users
patent
1 patent

Citations

dimensions_citation
7 Dimensions

Readers on

mendeley
43 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Characterization of Minerals, Metals, and Materials 2016
Published by
Springer International Publishing, January 2016
DOI 10.1007/978-3-319-48210-1
ISBNs
978-3-31-948623-9, 978-3-31-948210-1
Editors

Ikhmayies, Shadia Jamil, Li, Bowen, Carpenter, John S., Hwang, Jiann-Yang, Monteiro, Sergio Neves, Li, Jian, Firrao, Donato, Zhang, Mingming, Peng, Zhiwei, Escobedo-Diaz, Juan P., Bai, Chenguang

X Demographics

X Demographics

The data shown below were collected from the profiles of 10 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 43 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 43 100%

Demographic breakdown

Readers by professional status Count As %
Researcher 7 16%
Student > Master 6 14%
Student > Bachelor 6 14%
Student > Ph. D. Student 6 14%
Student > Doctoral Student 3 7%
Other 6 14%
Unknown 9 21%
Readers by discipline Count As %
Engineering 11 26%
Environmental Science 5 12%
Materials Science 5 12%
Chemical Engineering 2 5%
Physics and Astronomy 1 2%
Other 3 7%
Unknown 16 37%