↓ Skip to main content

Light Metals 2017

Overview of attention for book
Cover of 'Light Metals 2017'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 CFB Alumina Calciners—New and Future Generation Opportunities for Green Field Refineries
  3. Altmetric Badge
    Chapter 2 Evolutional Development of Alkaline Aluminosilicates Processing Technology
  4. Altmetric Badge
    Chapter 3 Characterization and Ore Dressing of Bauxite from Brazil
  5. Altmetric Badge
    Chapter 4 Process Optimization for Diaspore Digestion Equilibrium Using Response Surface Methodology
  6. Altmetric Badge
    Chapter 5 Thermodynamic Analysis and Formation Law of Q Phase of Calcium Aluminate Clinker
  7. Altmetric Badge
    Chapter 6 Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution
  8. Altmetric Badge
    Chapter 7 Security Disposal and Comprehensive Utilization of Bauxite Residues
  9. Altmetric Badge
    Chapter 8 Bauxite Residue Amendment Through the Addition of Ca and or Mg Followed by Carbonation
  10. Altmetric Badge
    Chapter 9 Application of Tricalcium Aluminate Instead of Lime for the Recovery of Aluminum in Middle-Low Grade Bauxite in Calcification-Carbonization Process
  11. Altmetric Badge
    Chapter 10 Low Temperature Reduction of Hematite in Red-Mud to Magnetite
  12. Altmetric Badge
    Chapter 11 Recovery of Iron-, Titanium-Bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching
  13. Altmetric Badge
    Chapter 12 Processing Diasporic Red Mud by the Calcification-Carbonation Method
  14. Altmetric Badge
    Chapter 13 Research of Flocculants and Dewatering Additives for Filtration of Red Mud
  15. Altmetric Badge
    Chapter 14 Characterization of Activated Alumina Production via Spray Pyrolysis
  16. Altmetric Badge
    Chapter 15 New Process Research on Aluminium Production from Non-Traditional Aluminum Resource by Microwave Chlorination
  17. Altmetric Badge
    Chapter 16 Opportunities of Pseudoboehmite Processing from Aluminum Content Raw Material at Sintering Method
  18. Altmetric Badge
    Chapter 17 Chemical Alumina Preparation by Using High Alumina Content Fly Ash
  19. Altmetric Badge
    Chapter 18 A Novel Process of Alumina Production from Low-Grade Bauxite Containing Sulfur
  20. Altmetric Badge
    Chapter 19 Iron Separation from Bauxite Through Smelting-Reduction Process
  21. Altmetric Badge
    Chapter 20 Thermodynamic Behavior of Lime Desulfurization in Sodium Aluminate Solution
  22. Altmetric Badge
    Chapter 21 A Study on Optimization of Processing Parameters for Synthesis of Calcium Hydroaluminosulfate Using Response Surface Methodology
  23. Altmetric Badge
    Chapter 22 Design of New 6xxx Series Al Alloy Using the Calphad Thermodynamic Database
  24. Altmetric Badge
    Chapter 23 Study of an Al-Ca Alloy with Low Young’s Modulus
  25. Altmetric Badge
    Chapter 24 Production of 3004 Aluminum Alloy Sheet for Structural Applications from Twin Roll Casting
  26. Altmetric Badge
    Chapter 25 Aluminum Alloys with Tailored TiB2 Particles for Composite Applications
  27. Altmetric Badge
    Chapter 26 Development of Low Expansion and High Strength Aluminum Matrix Hybrid Composite
  28. Altmetric Badge
    Chapter 27 A Model for α-Al(Mn,Fe)Si Crystals
  29. Altmetric Badge
    Chapter 28 Casting Characteristics of High Cerium Content Aluminum Alloys
  30. Altmetric Badge
    Chapter 29 In Situ Observation of Fragmentation of Primary Crystals by Ultrasonic Cavitation in Water
  31. Altmetric Badge
    Chapter 30 The Enhancement of Mechanical Properties of A356 Alloy Solidified at Lower Cooling Rate via Effectively Grain Refinement
  32. Altmetric Badge
    Chapter 31 Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application
  33. Altmetric Badge
    Chapter 32 Integrated Casting-Extrusion (ICE) of an AA6082 Aluminium Alloy
  34. Altmetric Badge
    Chapter 33 On Porosity Formation in Al–Si–Cu Cast Alloys
  35. Altmetric Badge
    Chapter 34 Algorithm for Finding the Correlation Between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters
  36. Altmetric Badge
    Chapter 35 Analysis of an Aluminium Alloy Containing Trace Elements
  37. Altmetric Badge
    Chapter 36 Determination of Aluminum Oxide Thickness on the Annealed Surface of 8000 Series Aluminum Foil by Fourier Transform Infrared Spectroscopy
  38. Altmetric Badge
    Chapter 37 Using Guard Bands to Accommodate Uncertainty in the Spark AES Analysis of Aluminum or Aluminum Alloys When Determining Compliance with Specified Composition Limits
  39. Altmetric Badge
    Chapter 38 Laser Marking and 3D Imaging of Aluminum Products
  40. Altmetric Badge
    Chapter 39 Production and Certification of Arconic Certified Reference Materials
  41. Altmetric Badge
    Chapter 40 Characterization of Large Strain Extrusion Machining (LSEM) of AA7050
  42. Altmetric Badge
    Chapter 41 Influence of Trace Element Additions on Fe Bearing Intermetallic Solidification of a 6063 Al Alloy
  43. Altmetric Badge
    Chapter 42 The Optimization of the Homogenization Treatment of AA7075
  44. Altmetric Badge
    Chapter 43 Precipitation Modeling and Validation of Al–5%Cu–0.4%Mn Alloy Using Quench Factor Analysis
  45. Altmetric Badge
    Chapter 44 Young’s Modulus of Al–Si–Mg–Cu Based Alloy Under Different Heat Treatment Processes
  46. Altmetric Badge
    Chapter 45 Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod
  47. Altmetric Badge
    Chapter 46 The Influence of Process Parameters and Themomechanical History on Streaking Defects in AA6060 Extrusions
  48. Altmetric Badge
    Chapter 47 Effect of Heat-Treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy
  49. Altmetric Badge
    Chapter 48 Effect of Interrupted Quenching on Al–Zn–Mg–Cu Alloys
  50. Altmetric Badge
    Chapter 49 New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals
  51. Altmetric Badge
    Chapter 50 Quantifying As-Cast and Homogenized AA7050 Mechanical Properties Through Compression Testing
  52. Altmetric Badge
    Chapter 51 Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals
  53. Altmetric Badge
    Chapter 52 Microstructural Transition and Elevated Temperature Tensile Properties of Modified Al–Si–Cu–Mg Alloys
  54. Altmetric Badge
    Chapter 53 Effect of Alloying Elements on Anneal-Hardening Behavior of Aluminum Alloy Foils
  55. Altmetric Badge
    Chapter 54 Increasing Strength and Corrosion Resistance of AlMgSi Alloys by Tailor-Made Thermomechanical Processing
  56. Altmetric Badge
    Chapter 55 Microstructural Optimization of a High Mechanical Properties Aluminum Alloy By Using CobaPress Process
  57. Altmetric Badge
    Chapter 56 Cyclic Stress-Strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy
  58. Altmetric Badge
    Chapter 57 Corrosion of Al–Mg Alloys in Ethanol
  59. Altmetric Badge
    Chapter 58 Warm Pressing of Al Powders: An Alternative Consolidation Approach
  60. Altmetric Badge
    Chapter 59 Spreading of Alumina and Raft Formation on the Surface of Cryolitic Bath
  61. Altmetric Badge
    Chapter 60 Fluoride Capture Capacity of SGA: The Interplay Between Particle and Pore Size Distributions
  62. Altmetric Badge
    Chapter 61 Predictive Formula for the Competitive Adsorption of HF and SO2 on Smelter Grade Alumina Used in Dry Scrubbing Applications
  63. Altmetric Badge
    Chapter 62 Pot Gas Treatment at High Gas Temperatures
  64. Altmetric Badge
    Chapter 63 Influence of Handling Parameter on Powder Properties
  65. Altmetric Badge
    Chapter 64 Preventive Treatment of Anode Effects Using on-Line Individual Anode Current Monitoring
  66. Altmetric Badge
    Chapter 65 Reduction in EGA Jebel Ali Potroom GHG Emissions
  67. Altmetric Badge
    Chapter 66 Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell
  68. Altmetric Badge
    Chapter 67 Co-evolution of Carbon Oxides and Fluorides During the Electrowinning of Aluminium with Molten NaF–AlF3–CaF2–Al2O3 Electrolytes
  69. Altmetric Badge
    Chapter 68 Chemical Stability of Thermal Insulating Materials in Sodium Vapour Environment
  70. Altmetric Badge
    Chapter 69 Aging of Insulating Linings in Aluminium Electrolysis Cells
  71. Altmetric Badge
    Chapter 70 Cathode Wear Based on Autopsy of a Shutdown Aluminium Electrolysis Cell
  72. Altmetric Badge
    Chapter 71 SPL Recycling and Re-processing
  73. Altmetric Badge
    Chapter 72 Alternative Applications of SPL: Testing Ideas Through Experiments and Mathematical Modeling
  74. Altmetric Badge
    Chapter 73 Clustering Aluminum Smelting Potlines Using Fuzzy C-Means and K-Means Algorithms
  75. Altmetric Badge
    Chapter 74 Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells
  76. Altmetric Badge
    Chapter 75 Study of the Impact of Anode Slots on the Voltage Fluctuations in Aluminium Electrolysis Cells, Using Bubble Layer Simulator
  77. Altmetric Badge
    Chapter 76 Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control
  78. Altmetric Badge
    Chapter 77 Predicting Instability and Current Efficiency of Industrial Cells
  79. Altmetric Badge
    Chapter 78 Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework
  80. Altmetric Badge
    Chapter 79 Bauxite Processing via Chloride Route to Produce Chloride Products and Subsequent Electrolysis of Aluminium Chloride to Produce Aluminium Metal
  81. Altmetric Badge
    Chapter 80 Stability of Chlorides in Cryolitic Electrolyte
  82. Altmetric Badge
    Chapter 81 Role of Heat Transfer and Interfacial Phenomena for the Formation of Carbon Oxides in Smelting Cells
  83. Altmetric Badge
    Chapter 82 Improving the Understanding of Busbar Design and Cell MHD Performance
  84. Altmetric Badge
    Chapter 83 LES Turbulence Modeling Approach for Molten Aluminium and Electrolyte Flow in Aluminum Electrolysis Cell
  85. Altmetric Badge
    Chapter 84 MHD of Large Scale Liquid Metal Batteries
  86. Altmetric Badge
    Chapter 85 Low Energy Consumption Cell Designs Involving Copper Inserts and an Innovative Busbar Network Layout
  87. Altmetric Badge
    Chapter 86 Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design
  88. Altmetric Badge
    Chapter 87 Crane Electrical Insulation Monitoring in Potlines New CANDI™ 4.0 Development
  89. Altmetric Badge
    Chapter 88 Surviving an Extended Power Outage After a Break Down in the Sub Station
  90. Altmetric Badge
    Chapter 89 Retrofit of Damaged Corner Risers by Means of Bolted Connections
  91. Altmetric Badge
    Chapter 90 Theory and Practice of High Temperature Gas Baking Technology for Aluminium Electrolysis Cells
  92. Altmetric Badge
    Chapter 91 Implementation of D18+ Cell Technology at EGA’s Jebel Ali Smelter
  93. Altmetric Badge
    Chapter 92 Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS
  94. Altmetric Badge
    Chapter 93 DX+ Ultra—EGA High Productivity, Low Energy Cell Technology
  95. Altmetric Badge
    Chapter 94 Potroom HF Emission Reduction by Anode Inert Tray Technology Performance of ALRO Industrial 1st of Class
  96. Altmetric Badge
    Chapter 95 Enabling Efficient Heat Recovery from Aluminium Pot Gas
  97. Altmetric Badge
    Chapter 96 The Successful Implementation of AP40 Technology at Kitimat
  98. Altmetric Badge
    Chapter 97 Effect of Grain Refiners on Aluminum Twin Roll Casting Process
  99. Altmetric Badge
    Chapter 98 Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi-Alloy
  100. Altmetric Badge
    Chapter 99 Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys
  101. Altmetric Badge
    Chapter 100 Influence of Sticking on the Roll Topography at Twin-Roll Casting of Aluminum Alloys
  102. Altmetric Badge
    Chapter 101 Material Surface Roughness Change in Twin Roll Casting of Aluminium as Cast Sheet Product
  103. Altmetric Badge
    Chapter 102 Twin-Roll Casting of Aluminum-Steel Clad Strips: Static and Dynamic Mechanical Properties of the Composite
  104. Altmetric Badge
    Chapter 103 Multi-Component High Pressure Die Casting (M-HPDC): Influencing Factors on the Material Temperature During the Joining of Metal-Plastic-Hybrids
  105. Altmetric Badge
    Chapter 104 X-Ray Computed Tomographic Investigation of High Pressure Die Castings
  106. Altmetric Badge
    Chapter 105 The Comparison of Intensive Riser Cooling of Castings After Solidification in Three Classic Metals
  107. Altmetric Badge
    Chapter 106 Sequential Gravity Casting in Functionally Graded Aluminum Alloys Development
  108. Altmetric Badge
    Chapter 107 Assessment of Eutectic Modification Level in Al–Si Alloys Via Thermal Analysis
  109. Altmetric Badge
    Chapter 108 Application and Results of Oxipyr® Diluted Combustion in Aluminum Furnaces
  110. Altmetric Badge
    Chapter 109 Case Study of Magnetically-Stirred Casting Furnaces at New Zealand Aluminium Smelters Limited
  111. Altmetric Badge
    Chapter 110 Energy Efficiency Status-Quo at UK Foundries: The “Small-Is-Beautiful” Project
  112. Altmetric Badge
    Chapter 111 Optimization of Recovery Efficiency for Briquetted Aluminum Chips up to Briquetting Parameters
  113. Altmetric Badge
    Chapter 112 The Evaluation of Hot Dross Processing Systems
  114. Altmetric Badge
    Chapter 113 A Study on DC Casting Trough/Launder Design and Material Selection
  115. Altmetric Badge
    Chapter 114 Critical Role of Thermal Management During Cast Start-Up of the DC Casting Process
  116. Altmetric Badge
    Chapter 115 Modelling and Analysis of a Horizontal Direct Chill Casting Process
  117. Altmetric Badge
    Chapter 116 Circulation of Grains During Ingot Casting
  118. Altmetric Badge
    Chapter 117 Minimization of Macrosegregation Through Jet Erosion of a Continuously Cast Ingot
  119. Altmetric Badge
    Chapter 118 Full Size Measurement and Simple Prediction on Macro Segregation of Aluminum Alloys Elements in Industrial Direct Chill Casting Slab
  120. Altmetric Badge
    Chapter 119 Ultrasonic Assisted Reduction of Hot-Tearing During High-Speed DC Casting of 6000 Series Aluminum Alloys
  121. Altmetric Badge
    Chapter 120 Effect of Ultrasonic Processing on a Direct Chill Cast AA6082 Aluminium Alloy
  122. Altmetric Badge
    Chapter 121 Shear Induced Grain Refinement of a Continuously Cast Ingot
  123. Altmetric Badge
    Chapter 122 Microstructure Control in A356 Al–Si Alloy Via Ultrasonic Melt Treatment
  124. Altmetric Badge
    Chapter 123 Grain Refiner Sedimentation in the Launder System of Twin Roll Casting and Application of Electromagnetic Stirring
  125. Altmetric Badge
    Chapter 124 Thermal Analysis of Grain Refining in A319 Alloys
  126. Altmetric Badge
    Chapter 125 Peritectic Coupled Growth Solidification—a Review
  127. Altmetric Badge
    Chapter 126 Overpressure Due to a Molten Aluminum and Water Explosion in a Casthouse
  128. Altmetric Badge
    Chapter 127 Automation and Optimization of Sow Casting in Alouette
  129. Altmetric Badge
    Chapter 128 Radio Frequency Identification (RFID) Technology for the Aluminum Industry
  130. Altmetric Badge
    Chapter 129 Semi Finished Products Traceability Improvement with Laser Marking
  131. Altmetric Badge
    Chapter 130 Structural Integrity Assessment of Pressurized Ladles for Aluminum Smelting
  132. Altmetric Badge
    Chapter 131 Has Recent Advances in Direct Chill Casting Made Us Less Safe?
  133. Altmetric Badge
    Chapter 132 Tramp Element Accumulation and Its Effects on Secondary Phase Particles
  134. Altmetric Badge
    Chapter 133 Dross Formation Mechanisms of Thermally Pre-Treated Used Beverage Can Scrap Bales with Different Density
  135. Altmetric Badge
    Chapter 134 Influence of Coating and De-Coating on the Coalescence of Aluminium Drops in Salt
  136. Altmetric Badge
    Chapter 135 The Scale-Up of High Shear Processing for the Purification of Recycled Molten Scrap Aluminium Alloy: Key Features of Fluid Flow
  137. Altmetric Badge
    Chapter 136 Centrifugal Casting of Al–Si Scrap
  138. Altmetric Badge
    Chapter 137 Improved Recyclability of Cast Al-Alloys by Engineering β-Al9Fe2Si2 Phase
  139. Altmetric Badge
    Chapter 138 Influence of Calcination Temperature and Sulfur Level on Coke Properties
  140. Altmetric Badge
    Chapter 139 Pilot Anode Properties of Binder Pitches Softening Between 110 and 150 °C
  141. Altmetric Badge
    Chapter 140 Uniform Bulk Density for Calcined Petroleum Coke
  142. Altmetric Badge
    Chapter 141 Use of Thermally Desulfurized Shaft CPC for Anode Production
  143. Altmetric Badge
    Chapter 142 Anode Carbon Aggregate Packing Description Compared to Relevant Industrial and Engineering Practises
  144. Altmetric Badge
    Chapter 143 CPC Testing and Relationship Between Coke and Anode Physical Properties
  145. Altmetric Badge
    Chapter 144 Effect of Coke Properties on the Bubble Formation at the Anodes During Aluminium Electrolysis in Laboratory Scale
  146. Altmetric Badge
    Chapter 145 Anode Quality Improvement at Inalum Smelter
  147. Altmetric Badge
    Chapter 146 Coke Produced from Lower-Oxygen Fast-Pyrolysis Oil, A New Approach to Produce Renewable Anode Raw Materials
  148. Altmetric Badge
    Chapter 147 25 Years of Natural Gas Purged Infrared Pyrometer Temperature Measurement for the Operation of Open-Top Anodes Baking Furnaces
  149. Altmetric Badge
    Chapter 148 Characterization of Prebake Anodes by Micro X-ray Computed Tomography
  150. Altmetric Badge
    Chapter 149 Development of Techniques and Tools for the Determination of Carbon Anode Quality
  151. Altmetric Badge
    Chapter 150 Flow Detection Module—A New Model to Predict the Flow in Open Pit Anode Baking Furnaces
  152. Altmetric Badge
    Chapter 151 Formation of Carbon Build-Up on the Flue Wall of Anode Baking Furnace
  153. Altmetric Badge
    Chapter 152 Identification of the Stress Intensity Factor of Carbon Cathode by Digital Image Correlation
  154. Altmetric Badge
    Chapter 153 Investigation of Spent Refractory Lining in an Anode Baking Furnace
  155. Altmetric Badge
    Chapter 154 Non-Destructive Testing of Baked Anodes Based on Modal Analysis and Principal Component Analysis
  156. Altmetric Badge
    Chapter 155 3D Automated Anode Stub Inspection System
  157. Altmetric Badge
    Chapter 156 Impact of Cast Iron Degradation and Cathode Block Erosion on the Current Path in the Cathodic Assembly of Aluminum Production Cells
  158. Altmetric Badge
    Chapter 157 Finite Element Analysis of Slot Size Effect on the Thermal-Electrical Behaviour of the Anode
  159. Altmetric Badge
    Chapter 158 Hydrodynamic and Thermoelectric 3D Mathematical Model of Aluminium Electrolysis Cell to Investigate Slotted Carbon Anode Efficiency
  160. Altmetric Badge
    Chapter 159 Gas Anodes Made of Porous Graphite for Aluminium Electrowinning
  161. Altmetric Badge
    Chapter 160 The Impact of Anode Nails on the Stub to Carbon Electrical Contact Resistance of Anode Assemblies with Simulated Corroded Stubs
  162. Altmetric Badge
    Chapter 161 Xelios 2.0: Return on Experience for the Advanced Eco-Designed Vibro-Compactor
  163. Altmetric Badge
    Chapter 162 Production of NiFe2O4 Nanocermet for Aluminium Inert Anode
  164. Altmetric Badge
    Chapter 163 Reducing Cathode Voltage Drop and Reducing Peak Current Density by Use of Cathode Nails Across the Carbon to Cast Iron Interface
  165. Altmetric Badge
    Chapter 164 Hexapod Fleet Migration in Order to Upgrade to AP40LE Technology
  166. Altmetric Badge
    Chapter 165 The Impact of Increased Anode Size and Amperage Creep on Anode Management
  167. Altmetric Badge
    Chapter 166 The Contributions of Prof. Thorvald Engh and Christian Simensen to the Science and Technology of Melt Refining and Oxidation
  168. Altmetric Badge
    Chapter 167 The Fundamentals of Forming Microbubbles in Liquid Metal Systems
  169. Altmetric Badge
    Chapter 168 A Holistic Approach to Molten Metal Cleanliness
  170. Altmetric Badge
    Chapter 169 Results of Trials with a Multi Stage Filtration System Employing a Cyclone
  171. Altmetric Badge
    Chapter 170 Developments in Inclusion Removal Technology
  172. Altmetric Badge
    Chapter 171 Overview of Ultrasonic Degassing Development
  173. Altmetric Badge
    Chapter 172 Modelling of Hydrogen Removal in Gas Fluxing of Molten Aluminium
  174. Altmetric Badge
    Chapter 173 Oxide Skin Strength on Molten AA5XXX Aluminum Alloy—Effect of Beryllium and Alternatives
  175. Altmetric Badge
    Chapter 174 Understanding of Interactions Between Pyrolysis Gases and Liquid Aluminum and Their Impact on Dross Formation
  176. Altmetric Badge
    Chapter 175 Effects of 2 ppm Beryllium on the Oxidation of a 5XXX Aluminum Alloy at Temperatures Between 500 and 750 °C
  177. Altmetric Badge
    Chapter 176 The Use of Nitrogen to Degas Molten Aluminium—Comparison of Metallurgical Results with Argon and Nitrogen Used in an ACDtm
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
patent
1 patent

Citations

dimensions_citation
16 Dimensions

Readers on

mendeley
121 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Light Metals 2017
Published by
Springer International Publishing, January 2017
DOI 10.1007/978-3-319-51541-0
ISBNs
978-3-31-951540-3, 978-3-31-951541-0
Editors

Arne P. Ratvik

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 121 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 121 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 23 19%
Student > Master 16 13%
Researcher 15 12%
Student > Bachelor 9 7%
Student > Doctoral Student 9 7%
Other 16 13%
Unknown 33 27%
Readers by discipline Count As %
Materials Science 38 31%
Engineering 21 17%
Chemical Engineering 11 9%
Chemistry 5 4%
Agricultural and Biological Sciences 1 <1%
Other 4 3%
Unknown 41 34%