↓ Skip to main content

Modern Building Materials, Structures and Techniques

Overview of attention for book
Cover of 'Modern Building Materials, Structures and Techniques'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Remains of Gediminas Castle Hill (Vilnius, Lithuania): 3D Numerical Model Behaviour
  3. Altmetric Badge
    Chapter 2 Relevant Achievements on the Activities of fib WP 2.4.1 for Modelling of Fibre Reinforced Concrete Structures
  4. Altmetric Badge
    Chapter 3 Emerging Global Trends in the Potential of Nanotechnology for Achieving the Net Zero Goals
  5. Altmetric Badge
    Chapter 4 On the Structural Relevance of Residual Welding Stresses
  6. Altmetric Badge
    Chapter 5 Novel Approaches in Constitutive Modelling and Serviceability Analysis of Reinforced Concrete Structures: Strain Compliance Crack Model
  7. Altmetric Badge
    Chapter 6 Microstructuring of Component Surfaces with Fine Particles by Cold Spraying
  8. Altmetric Badge
    Chapter 7 Sensitivities of Interfacial Bond-Sip Properties in Predicting the Behaviour of FRP-Strengthened Concrete
  9. Altmetric Badge
    Chapter 8 Determination of Crack Healing Efficiency of Concrete Containing Crystalline Admixture in Experimental Procedures Using Image Analysis
  10. Altmetric Badge
    Chapter 9 Changes in Concrete Subjected to Neutron Irradiation
  11. Altmetric Badge
    Chapter 10 Layer Interface Behaviour in Layered Concrete Structural Elements
  12. Altmetric Badge
    Chapter 11 Verification of the Concrete Slab in Timber-Concrete Composite Structures
  13. Altmetric Badge
    Chapter 12 Development and Performance of High Strength Lightweight Concrete with Perlites
  14. Altmetric Badge
    Chapter 13 Serviceability Assessment of FRP-Reinforced Concrete Beams Using Parametrized Tensile Stress Block
  15. Altmetric Badge
    Chapter 14 Improving the Mechanical Resistance of a Slender RHS Steel Profile with Polymeric Insert
  16. Altmetric Badge
    Chapter 15 Ultimate Load Capacity of Multi-Story Steel Frame Structures with Geometrical Imperfections: A Comparative Study of Two Methods
  17. Altmetric Badge
    Chapter 16 Steel Plane Frames: Entropy and Potential Energy of Elastic Buckling Modes
  18. Altmetric Badge
    Chapter 17 Modelling of Steel-Concrete-Steel Structure Using FEM Plane Elements
  19. Altmetric Badge
    Chapter 18 Laboratory Tests of Lightweight Composite Floor System LWT-FLOOR
  20. Altmetric Badge
    Chapter 19 Selection of an Optimum Axially Compressed Closed Cross-Section Thin-Walled Built-Up Column
  21. Altmetric Badge
    Chapter 20 Mitigating Concrete Shrinkage Cracking: Enhancing Performance with Macro Fibres and Modern Additives
  22. Altmetric Badge
    Chapter 21 Analysis of Reinforcement Strain Profiles Using Digital Twin Concept
  23. Altmetric Badge
    Chapter 22 Numerical Analysis of Prestressing Strand Placement Impact on Dapped-End Beam Bearing Capacity
  24. Altmetric Badge
    Chapter 23 The Water Footprint of Low Emission Advanced Performance Concrete
  25. Altmetric Badge
    Chapter 24 Flexural Strength Evaluation of Reinforced One-Way Concrete Slab With Plastic Voided Inserts
  26. Altmetric Badge
    Chapter 25 Discrete Cracks Approach for Deformational Analysis of Reinforced Concrete Beams
  27. Altmetric Badge
    Chapter 26 Development of Thermal Storage Building Exterior Using Phase Change Materials
  28. Altmetric Badge
    Chapter 27 Effects of Water Immersion on Mechanical Properties of Kevlar Composites Reinforced with ZnO Nanoparticles
  29. Altmetric Badge
    Chapter 28 Influence of Industrial Waste Pozzolanic Additives on the Structure and Properties of Expanded Glass Granules Cement-Based Composite
  30. Altmetric Badge
    Chapter 29 Fully Biobased Panels for Building Thermal Insulation
  31. Altmetric Badge
    Chapter 30 The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D-Printed Concrete Elements
  32. Altmetric Badge
    Chapter 31 Influence of the Type of Binder on the Properties of Artificial Aggregates from Construction Waste
  33. Altmetric Badge
    Chapter 32 Modification of the Surface of Refractory Materials by Cold Gas-Dynamic Spraying
  34. Altmetric Badge
    Chapter 33 Nanotechnology: The Challenge in Innovative Architectural Design Using Nanomaterials
  35. Altmetric Badge
    Chapter 34 Effect of Glass Processing Waste Content on Concrete Properties
  36. Altmetric Badge
    Chapter 35 Influence of Superabsorbent Polymers on Early Stages Hydration of Cement-based Pastes Containing Fly Ash
  37. Altmetric Badge
    Chapter 36 Impact of Modified Biopolymer on Properties of Clay Composites
  38. Altmetric Badge
    Chapter 37 Exploiting Synergistic Effect of Metakaolin and Silica Fume in Production of High Strength Mortar
  39. Altmetric Badge
    Chapter 38 The Role of the Type of Mix Water and Ion Concentration on the Fresh State Properties of Mortar
  40. Altmetric Badge
    Chapter 39 Benefits of Chemical Prestressing Over Mechanical Prestressing of FRP Rods
  41. Altmetric Badge
    Chapter 40 Experimental Study on Evaluation Accuracy of Pervious Concrete Dynamic Elastic Modulus Using Mobile Devices
  42. Altmetric Badge
    Chapter 41 Sterilization of Biotic Agents by Microwave Technology in Construction Materials
  43. Altmetric Badge
    Chapter 42 Cement-Asbestos Waste as a Source of Secondary Raw Material for the Production of Mineral Binders
  44. Altmetric Badge
    Chapter 43 Boric Acid as a Pore-Forming Additive in Glass-Clay Compositions
  45. Altmetric Badge
    Chapter 44 The Metakaolin Waste Effect on the Physical and Mechanical Properties of High-Performance Concrete
  46. Altmetric Badge
    Chapter 45 Effect of Low Oxidation Graphene Oxide on Physical and Mechanical Properties of MCC Type Refractory Castable
  47. Altmetric Badge
    Chapter 46 Properties of Biomass Fly Ash-Phosphogypsum Based Pastes
  48. Altmetric Badge
    Chapter 47 Additive Manufacturing Methodology for Structurally Optimized Space Frame Connections
  49. Altmetric Badge
    Chapter 48 The Influence of Secondary Raw Materials on Properties of Aerated Autoclaved Concrete
  50. Altmetric Badge
    Chapter 49 Lightweight Portland Cement Mixtures with Perlite for 3D printing of Concrete Structures
  51. Altmetric Badge
    Chapter 50 Selection of Technology for the Reconstruction of Masonry Walls of Heritage Buildings
  52. Altmetric Badge
    Chapter 51 Evaluation of the Use of Unmanned Aerial System (Drone) on Risk/Accidents Involved in Construction Project Monitoring, Enugu State, Nigeria
  53. Altmetric Badge
    Chapter 52 Pricing and Construction Contract Type Selection Model
  54. Altmetric Badge
    Chapter 53 Effects of Overall Satisfaction with PV Systems and Subsidy Policy on Energy Security for Rooftop Buildings Using System Dynamics
  55. Altmetric Badge
    Chapter 54 Evaluation of Financial Efficiency of Real Estate Investment Projects: The Significance of Sustainability Indicators in the Long-Term Perspective
  56. Altmetric Badge
    Chapter 55 Evaluation of Suspended Veneer Façade Criteria at the Construction Stage
  57. Altmetric Badge
    Chapter 56 Usefulness of Crisp AHP/ANP Rating Scales to Risk Assessment Differentiation
  58. Altmetric Badge
    Chapter 57 Development of Timber Construction in European Countries: Drivers, Barriers, and Education
  59. Altmetric Badge
    Chapter 58 Decision Support Systems in Construction: A Bibliometric Analysis
  60. Altmetric Badge
    Chapter 59 Comparative Review on Integration Levels Between Design and Analysis Systems
  61. Altmetric Badge
    Chapter 60 Multidimensional and Imperfect Information Dependency-Aware Occupational Risk Assessment
  62. Altmetric Badge
    Chapter 61 Environmental Benefits of Geosynthetics in Construction Projects
  63. Altmetric Badge
    Chapter 62 Stabilization of Soil Using Polyurethane Resin Injection Technology
  64. Altmetric Badge
    Chapter 63 Intermediate Till Soil Properties and Distinctive Features
  65. Altmetric Badge
    Chapter 64 Energy Efficient Civil Engineering Structures – EECES
  66. Altmetric Badge
    Chapter 65 Construction of a High-Rise Building near Sensitive Infrastructures and the Resulting Soil-Structure Interaction
  67. Altmetric Badge
    Chapter 66 Analysis of Soil-Geogrid Interaction and Alternative Soil Layer Approach for Improved Road Embankment Stability
  68. Altmetric Badge
    Chapter 67 Prediction of Ultimate Bearing Capacities of Test Piles According to Different Methods
  69. Altmetric Badge
    Chapter 68 Geology for Planning and Construction of Deep Geological Repository of Radioactive Waste (Lithuanian Case)
  70. Altmetric Badge
    Chapter 69 Modal Analysis of a Multi-storey Frame Building with Consideration of the Soil Base
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Modern Building Materials, Structures and Techniques
Published by
Springer Nature Switzerland, October 2023
DOI 10.1007/978-3-031-44603-0
ISBNs
978-3-03-144602-3, 978-3-03-144603-0
Editors

Barros, Joaquim A. O., Kaklauskas, Gintaris, Zavadskas, Edmundas K.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.