↓ Skip to main content

Advances in Fluid and Thermal Engineering

Overview of attention for book
Cover of 'Advances in Fluid and Thermal Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Plasma Functionalized Wettability Gradient Surfaces for Electronic Cooling
  3. Altmetric Badge
    Chapter 2 Effect of Porous Plug Shape and Permeability on Convective Heat Transfer Characteristics of Flow Through a Mini Channel
  4. Altmetric Badge
    Chapter 3 Condition Monitoring of Reciprocating Compressor Using ANN
  5. Altmetric Badge
    Chapter 4 Novel Supercritical Carbon Dioxide Cycle for a Waste Recovery Application
  6. Altmetric Badge
    Chapter 5 Cross-Recurrence Analysis of Pressure Signals in Air-Water Two-Phase Flow
  7. Altmetric Badge
    Chapter 6 Effect of Linearly Varying Diameter on Thermo-Hydrodynamics of Two-Phase Closed Thermosyphon
  8. Altmetric Badge
    Chapter 7 Investigation of Performance and Smoke Characteristics of Diesel Engine Powered by Various Blends of Biodiesels Extracted from Disposed Edible Oil
  9. Altmetric Badge
    Chapter 8 Effect of Inverting Heat Source Direction on the Melting of Phase Change Material Under the Influence of Microgravity Environment
  10. Altmetric Badge
    Chapter 9 Study of Operating Parameters for a Controllable Water Flash Evaporation
  11. Altmetric Badge
    Chapter 10 Numerical Study of Heat Transfer Fluid Position on Solidification of PCM in Fin Assisted Thermal Energy Storage System
  12. Altmetric Badge
    Chapter 11 Linseed Biodiesel—A Review
  13. Altmetric Badge
    Chapter 12 Static and Fatigue Analysis of Boiler Shell with Circumferential Riveted Joint
  14. Altmetric Badge
    Chapter 13 Quantifying the Dynamics of Fluid Flow in a Hydraulic Jump Using Imaging Techniques
  15. Altmetric Badge
    Chapter 14 Failure Modes and Effect Analysis of a Gas Compressor in a Gas Processing Complex: A Case Study Based Approach
  16. Altmetric Badge
    Chapter 15 Heat Transmission and Friction Flow in a Round Tube with Equally Gapped Perverted Tape Element, an Investigation
  17. Altmetric Badge
    Chapter 16 CFD Based Investigation on the Influence of the Darrieus Rotor Diameter in the Performance of Combined Hydrokinetic Rotor
  18. Altmetric Badge
    Chapter 17 Prediction of Output Generated by a Steam Turbine Using Machine Learning
  19. Altmetric Badge
    Chapter 18 Numerical Simulation of Bubble Formation Under Different Nozzle Height Shaped with Constant Air Flow Rate
  20. Altmetric Badge
    Chapter 19 Design and Development of Liquid Helium Storage Dewar
  21. Altmetric Badge
    Chapter 20 Characterization of the Performance and Emission Behavior of a DME-Diesel Dual Fuel Engine
  22. Altmetric Badge
    Chapter 22 Performance Prediction of Thermal Contact Conductance Using Artificial Neural Network
  23. Altmetric Badge
    Chapter 23 CFD Study of Pulsatile Non-Newtonian Hemodynamics in Stenosed Brachial Artery
  24. Altmetric Badge
    Chapter 24 Numerical Investigation of Effect of Velocity and Geometry on Heat Transfer of Mini-Channel
  25. Altmetric Badge
    Chapter 25 Design and Analysis of Cascade Thermal Energy Storage System for Different Heat Transfer Fluids
  26. Altmetric Badge
    Chapter 26 Experimental Study on Ignition Delay Characteristics of Diesel Engine Fueled with n-pentane and n-hexane Blends
  27. Altmetric Badge
    Chapter 27 A Review: Experimental Investigation on Low Frequency Excited Tube in Tube Heat Exchanger with Applications of Nano Fluids
  28. Altmetric Badge
    Chapter 28 Comparative Study of Performance Parameters of CI Engine Fueled with Various Blends of Biodiesel
  29. Altmetric Badge
    Chapter 29 Advancement in Solar Energy Technology and Its Future Growth
  30. Altmetric Badge
    Chapter 30 A Comparative Study of Parabolic Dish Concentrators Used in Various Systems
  31. Altmetric Badge
    Chapter 31 Future Scope and Developments on Nano Refrigerants in the Refrigeration System: A Review
  32. Altmetric Badge
    Chapter 32 Thermal Performance Analysis and CFD Investigation of Tubular Concentric Heat Exchanger by Using Nanofluids
  33. Altmetric Badge
    Chapter 33 Thermal Management Modelling of Photovoltaic System with Nano Fluid for Semi-Arid Climatic Conditions
  34. Altmetric Badge
    Chapter 34 Numerical Investigation on Effect of Density Ratio of Effusion Cooled Combustor Liner Flat Plate
  35. Altmetric Badge
    Chapter 35 Performance Comparison of Diesel and Gasoline Engines Operating Under Indian Emission Standards: Application of Exergy Analysis
  36. Altmetric Badge
    Chapter 36 Impact of Nano-additive Additions in Biofuels on Combustion Performance and Emissions on CI Engine: A Comparative Study
  37. Altmetric Badge
    Chapter 37 Computational Analysis of Transfer of Heat in Micro Size Channels Using Different Boundary Condition in Laminar Flow
  38. Altmetric Badge
    Chapter 38 Modelling of SPWM Technique Based Three Phase Inverter and Boost Converter for Photovoltaic Based Water Pumping System
  39. Altmetric Badge
    Chapter 39 Effect of Nose Cone Geometry on the Fluid Flow Over a Rotating Slender Body
  40. Altmetric Badge
    Chapter 40 Advanced Greenhouse Monitoring and Control System
  41. Altmetric Badge
    Chapter 41 A Review on Application of Heat Pipe to Improve Vapor Compression Refrigeration System Performance
  42. Altmetric Badge
    Chapter 42 Influence of Blockage on Hemodynamics of Coronary Arteries: A Numerical Investigation
  43. Altmetric Badge
    Chapter 43 Influence of Wake Splitter Plate on Flow Over a Triangular Cylinder at a Low Reynolds Number: A Numerical Study
  44. Altmetric Badge
    Chapter 44 Comparative CFD Analysis of Filter Materials for Crude Biodiesel Filtration Application
  45. Altmetric Badge
    Chapter 45 Biofuel Production from Water Hyacinth for Energy and Environment Sustainability
  46. Altmetric Badge
    Chapter 46 Impact of Seam Angle on Boundary Layer Profile of a Cricket Ball
  47. Altmetric Badge
    Chapter 47 Reduction of Coke Oven Gas Flow by Rectification of Undercharging of Oven of Coke Oven Battery
  48. Altmetric Badge
    Chapter 48 Dynamic Performance Enhancement of Fuel Cell Using PID Controller
  49. Altmetric Badge
    Chapter 49 Recent Advancements in Thermochemical Conversion of Biomass and Technologies Used to Eliminate the Tar Formation
  50. Altmetric Badge
    Chapter 50 Performance Analysis on the Variable Area Single- and Two-Stage Ejector System at Different Operating Pressures Using Computational Techniques
  51. Altmetric Badge
    Chapter 51 Augmentation of Heat Transfer Over Dimple Surface in Forced Convection—An RSM and ANN Modelling Approach
  52. Altmetric Badge
    Chapter 52 Study the Temperature Variation in Alternate Coils of Insulated Condenser Cum Storage Tank: Experimental Study
  53. Altmetric Badge
    Chapter 53 Triple Band Rejection Capability-Based UWB MIMO Antenna for Wireless Applications
  54. Altmetric Badge
    Chapter 54 Investigation on Addition of HHO Gas in Gasoline Engine
  55. Altmetric Badge
    Chapter 55 Numerical Simulation of Flow Over a Heated Square Cylinder in Parallel Flow Orientation
  56. Altmetric Badge
    Chapter 56 Understanding the Characteristics of Film Boiling Heat Transfer Over Curved Surfaces with Emphasis on Thermal Management of Electronics
  57. Altmetric Badge
    Chapter 57 Comparative Analysis of Solar Energy-Based Water Purification Systems Based on Various Designs
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
5 X users
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Fluid and Thermal Engineering
Published by
Springer Nature Singapore, July 2023
DOI 10.1007/978-981-99-2382-3
ISBNs
978-9-81-992381-6, 978-9-81-992382-3
Editors

Sikarwar, Basant Singh, Sharma, Sanjeev Kumar, Jain, Ankur, Singh, Krishna Mohan

X Demographics

X Demographics

The data shown below were collected from the profiles of 5 X users who shared this research output. Click here to find out more about how the information was compiled.