↓ Skip to main content

Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering

Overview of attention for book
Cover of 'Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Investigating the Synthesis of Activated Carbon from Carbon Chips of Carbon Fibre Reinforced Polymer for the Removal of Methylene Blue
  3. Altmetric Badge
    Chapter 2 The Influence of Glycerol on Physical and Mechanical Properties of Mango Seed Starch Film
  4. Altmetric Badge
    Chapter 3 Influence of Cutting Edge Radius (CER) and Width of Cut (WOC) on Tool Wear in Milling SUS 316 Stainless Steel
  5. Altmetric Badge
    Chapter 4 Influence of Milling Parameters on the Characteristics of Alumina-Titania Nanocomposite Prepared by High-Energy Ball Milling
  6. Altmetric Badge
    Chapter 5 ANFIS Domestic Water Consumption Model Before and During Covid19 Pandemic in Tangerang Indonesia
  7. Altmetric Badge
    Chapter 6 Microstructure and Mechanical Properties of Porous Aluminium Composites Reinforced with Diamond Particles
  8. Altmetric Badge
    Chapter 7 Improving Bending Deformation Behavior of Superelastic NiTi Archwire by Ageing Treatment
  9. Altmetric Badge
    Chapter 8 A Short Review on Diamond Reinforced Aluminium Composites
  10. Altmetric Badge
    Chapter 9 Amperometric Study of P3HT/Multi-walled Carbon Nanotubes Composite for Malathion Sensing
  11. Altmetric Badge
    Chapter 10 Force Deflection Behaviors of NiTi Archwires at Different Bending Conditions: A Mini Review
  12. Altmetric Badge
    Chapter 11 Effect of Carbon Dioxide Gas Flow Rate on Production of PCC from Carbide Lime Waste
  13. Altmetric Badge
    Chapter 12 Surface Wettability of Treated Quartz Substrates and Their Optical Characterization of Deposited Reduced Graphene Oxide
  14. Altmetric Badge
    Chapter 13 Development of Regression Model Between Driving Comfort Perception and Muscle Contraction
  15. Altmetric Badge
    Chapter 14 Comparative Study on Performance Characteristics of Modified Alloy Steels by TIG and Water Jet Peening Processes
  16. Altmetric Badge
    Chapter 15 Signal Improvement on Fibre Optic Evanescent Wave Sensor Based Polymeric Sensitive Coating of Chitosan-Agarose Hydrogel
  17. Altmetric Badge
    Chapter 16 Tribological Behavior of Cartilage Replacement with the Presence of Bio-Lubrication
  18. Altmetric Badge
    Chapter 17 The Physical Activation and Chemical Activation Reaction During Synthesis of Activated Carbon from Empty Fruit Bunch
  19. Altmetric Badge
    Chapter 18 Heterotrigona Itama Kelulut Honey Dehydration Process to Prolong Shelf Life
  20. Altmetric Badge
    Chapter 19 The Future Directions of IBS Prefabrication Implementation in the Construction Industry
  21. Altmetric Badge
    Chapter 20 Effect of Zirconia Doping on the Sintering and Mechanical Properties of Hydroxyapatite Bioceramic
  22. Altmetric Badge
    Chapter 21 Properties of Alumina–Zirconia Composites Prepared by Slip-Casting Method
  23. Altmetric Badge
    Chapter 22 Mechanical and Thermal Properties of 3D Printed Polylactic Acid Reinforced Alkaline Lignin with Epoxidized Palm Oil Bio-Composites
  24. Altmetric Badge
    Chapter 23 Effect of Supercritical Carbon Dioxide Pressure on Foamed PolyLactic Acid Biocomposite
  25. Altmetric Badge
    Chapter 24 Characteristics of Zinc-Doped Hydroxyapatite Prepared Using Biogenic and Synthetic Calcium Precursor
  26. Altmetric Badge
    Chapter 25 Energy Cost Characteristics of a Micro-Wind Power System Based on Different Capacity Factor: A Case Study of Locations in Nigeria
  27. Altmetric Badge
    Chapter 26 Parametric Study on Abrasive Wear of Reinforced Polytetrafluroethylene Composites Using Taguchi Model
  28. Altmetric Badge
    Chapter 27 Electric Vehicle Modeling: A Review
  29. Altmetric Badge
    Chapter 28 Wear and Corrosion of Ceramic Coated Metallic Surface in Presence of Biodiesel
  30. Altmetric Badge
    Chapter 29 Linear Shrinkage of ZTA–TiO 2 –Cr 2 O 3 Ceramic Cutting Tool
  31. Altmetric Badge
    Chapter 30 The Effect of LaB 6 Target Current on Mechanical and Tribological Properties LaB 6 Doped TiBCN Based Films Deposited by CFUBMS-HiPIMS
  32. Altmetric Badge
    Chapter 31 Enhancing the Tool Life of Aluminium Oxide (Al 2 O 3 ) Inserts Using Hybrid Microwave Energy in Dry Machining of High Strength Steel (KRUPP 6582)
  33. Altmetric Badge
    Chapter 32 A Comparative Study of Additively Manufactured Nickle Titanium (NiTi) Shape Memory Alloy (SMA)
  34. Altmetric Badge
    Chapter 33 The Mechanical and Tribological Properties of LaB 6 Thin Films Deposited by Closed-Field Unbalanced Magnetron Sputtering
  35. Altmetric Badge
    Chapter 34 Deposition of Nb Doped CrYN Thin Films: Investigation of Structural, Mechanical and Tribological Properties
  36. Altmetric Badge
    Chapter 35 Annealing Effect on Nb Additive CrYN Thin Films Deposited by Magnetron Sputtering
  37. Altmetric Badge
    Chapter 36 Structural, Optical, and Photocatalytic Performance of ZnO Particles Synthesized via Direct Heating Technique for Rhodamine B Removal
  38. Altmetric Badge
    Chapter 37 Synthesis and Characterization of Ta/TaN Coatings with CFUBMS-HiPIMS Technology
  39. Altmetric Badge
    Chapter 38 Enablers and Barriers of Lean Manufacturing Implementation in Indonesian Manufacturing Companies
  40. Altmetric Badge
    Chapter 39 Study on the Challenges of Implementing Industry 4.0 in UAE Using Analytical Hierarchy Process AHP Method
  41. Altmetric Badge
    Chapter 40 Surface Treatment of Polyethylene Terephthalate Substrate by Sodium Hydroxide
  42. Altmetric Badge
    Chapter 41 Enhancement of Fenton Process Using High Entropy Alloy Powder as Catalyst
  43. Altmetric Badge
    Chapter 42 Analysis of the Adjusting Bolts System’s Contribution to Levelling Error of the Heated Bed in FDM 3D Printer
  44. Altmetric Badge
    Chapter 43 Failure Mechanism on Ti-6Al-4V Material Processed Using Selective Laser Melting (SLM)
  45. Altmetric Badge
    Chapter 44 Lean Manufacturing and Six Sigma Principles Implementation in the Industry: Case Study
  46. Altmetric Badge
    Chapter 45 Study of Burrs in Milling of Marine Grade AISI 316 Stainless Steel with Minimum Quantity Lubrication
  47. Altmetric Badge
    Chapter 46 Friction Welding of Similar and Dissimilar Materials: Analysis of Tensile Strength
  48. Altmetric Badge
    Chapter 47 Performance of Graphite Based Nanofluid in MQL Grinding of Mild Steel
  49. Altmetric Badge
    Chapter 48 Study of Surface Integrity in Turning Ti-Alloy Using Optimal Depth of Cut
  50. Altmetric Badge
    Chapter 49 Tribology Properties of Titanium Alloy (Ti-6Al-4V) at Various Temperature on α/β Solution Treatment and Aging Condition
  51. Altmetric Badge
    Chapter 50 Experimental and Thermal Modeling of Beeswax-Filled Extruder via Solidwork for Batik Printing
  52. Altmetric Badge
    Chapter 51 Electrical Resistance of Fabric Immersed with PEDOT:PSS Doped Ag NPs and DMSO Solution
  53. Altmetric Badge
    Chapter 52 An Experimental Study on the Tensile Strength of Friction Stir Welded AA5052 Aluminum Alloy
  54. Altmetric Badge
    Chapter 53 Palladium/Lathanum Cobaltite Catalyst Polymer Exchange Membrane Fuel Cell for Electric Vehicle
  55. Altmetric Badge
    Chapter 54 Review on Fused Deposition Modelling Extruder Types with Their Specialities in Filament Extrusion Process
  56. Altmetric Badge
    Chapter 55 Extrusion Temperature and Viscosity of Various Soy Wax/Beeswax Blends
  57. Altmetric Badge
    Chapter 56 Investigation Study on Risk Management Practices in Adding Value to the New Product Development
  58. Altmetric Badge
    Chapter 57 A Comparison of the Thermal Conductivity of 3D Printed ABS and ABS/Graphite at Various Infill Patterns and Densities
  59. Altmetric Badge
    Chapter 58 Optimizing Tensile Strength of PLA-Lignin Bio-composites Using Machine Learning Approaches
  60. Altmetric Badge
    Chapter 59 Detection Method of Kelulut Honey Adulteration
  61. Altmetric Badge
    Chapter 60 Investigation of the Wear Behavior of Forging Tool by Ball on Disc and Impact Sliding Tribometer
  62. Altmetric Badge
    Chapter 61 Towards Whole Day Thermoelectric Energy Scavenging from Solar Using Carbon Based Photothermal Nanofluid
  63. Altmetric Badge
    Chapter 62 Diffusion, Seebeck and Conductivity of Spin Crossover Complexes Towards Thermoelectric Power Generation
  64. Altmetric Badge
    Chapter 63 In Situ Measurement and Remediation of Condensation Issue in Sarawak General Hospital Molecular Lab During COVID 19
  65. Altmetric Badge
    Chapter 64 Cement-Based with Partial Replacement of Nano-Silica for Improvement in Compressive Strength
  66. Altmetric Badge
    Chapter 65 Effect of Oxygen Gas Exposure on T91 Alloy at High Temperature Oxidation of Steam Reformer
  67. Altmetric Badge
    Chapter 66 Effect of Zn Content on Biodegradable Mg Alloy Synthesized via Mechanical Alloying for Biomedical Application
  68. Altmetric Badge
    Chapter 67 Effect of Pore Forming Agent on Phase Transformation Behavior of Porous NiTi Shape Memory Alloy
  69. Altmetric Badge
    Chapter 68 Nano-Structured Zinc Oxide/Silicon Dioxide Thermoelectric Generator: A Waste Heat Harvesting Technology
  70. Altmetric Badge
    Chapter 69 Mechanical and Structural Properties of Epoxy Bio-Composite Using Fish Bones as Bio-Filler
  71. Altmetric Badge
    Chapter 70 Characterization of New Biofluid Lubrication Formulation Using Castor Oil with Hyaluronic Acid Additive for Artificial Joints
  72. Altmetric Badge
    Chapter 71 Blast Furnace Slag Cement Clinker Production Using Limestone-Hot Blast Furnace Slag Mixture
  73. Altmetric Badge
    Chapter 72 A Quad Band Negative Permittivity Microwave Metamaterial Design for Satellite Applications with Wider Bandwidth
  74. Altmetric Badge
    Chapter 73 Fabrication of Plaque Using Hot Press Method for Recycling Plastic Material
  75. Altmetric Badge
    Chapter 74 A Case Study on Exploring the Benefits and Challenges Influencing the Implementation of Life Cycle Assessment as a Design Tool in an Air Filter Manufacturing Industry
  76. Altmetric Badge
    Chapter 75 Characterization of Poly(vinyl) Alcohol Based Aerogel Assisted by Cellulose Nanocrystal
  77. Altmetric Badge
    Chapter 76 Perforation Size Effect on Lotus Leaf Based Oil/Water Separator
  78. Altmetric Badge
    Chapter 77 Investigation of Chip Formation During Turning of Aluminum Alloys 7075-T651 in Dry and Chilled Air Condition
  79. Altmetric Badge
    Chapter 78 The Influence of Cutting Parameters and Chilled Air on the Tool Wear of Uncoated Solid Carbide Cutting Tool During Milling CFRP
  80. Altmetric Badge
    Chapter 79 Study on the Hardness of Uncoated Carbide Cutting Tool at Different Cutting Parameters
  81. Altmetric Badge
    Chapter 80 Cutting Temperatures and Their Effects on Drilling of NFRP Composites Using Taguchi Method
  82. Altmetric Badge
    Chapter 81 Investigation of Microgels and Double Crosslinked Microgels Containing 2-Carboxyethyl Acrylate (CEA)
  83. Altmetric Badge
    Chapter 82 Magnetic Properties of High Entropy Alloys as Electromagnetic Wave Absorber
  84. Altmetric Badge
    Chapter 83 The Latching Performance of Soy Wax/Beeswax Prints in Alkaline Dye Solution and Heated Water
  85. Altmetric Badge
    Chapter 84 Analysis and Optimum Machining Parameters on Surface Roughness and Material Removal Rate for Titanium Alloy in Milling Machining with MQL
  86. Altmetric Badge
    Chapter 85 Thermoelectric Properties of Β-FeSi 2 Thermoelectric Module Utilizing Cast-Iron Scrap Chips
  87. Altmetric Badge
    Chapter 86 Mechanical Properties of Magnesium Hydroxide/Halloysite Nanotubes Reinforced Polyamide 11 Nanocomposites
  88. Altmetric Badge
    Chapter 87 Two-Stage Sintering of Zirconia Toughened Alumina Composite (ZTA) Doped with Copper Oxide
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
1 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering
Published by
Springer Nature Singapore, May 2023
DOI 10.1007/978-981-19-9509-5
ISBNs
978-9-81-199508-8, 978-9-81-199509-5
Editors

Maleque, Md. Abdul, Ahmad Azhar, Ahmad Zahirani, Sarifuddin, Norshahida, Syed Shaharuddin, Sharifah Imihezri, Mohd Ali, Afifah, Abdul Halim, Nor Farah Huda

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.