↓ Skip to main content
What is this page? Embed badge

Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives

Overview of attention for book
Cover of 'Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 The Formation of Downward Freckles in Nb-Containing Superalloy Remelt Ingots
  3. Altmetric Badge
    Chapter 2 Manufacturing Large Superalloy Pipe Bends
  4. Altmetric Badge
    Chapter 3 The Effect of Microstructure on the Strength of VDM Alloy 780
  5. Altmetric Badge
    Chapter 4 Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production
  6. Altmetric Badge
    Chapter 5 Towards Enhancing Hot Tooling to Form High-γ′ Superalloys
  7. Altmetric Badge
    Chapter 6 In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718
  8. Altmetric Badge
    Chapter 7 Abnormal Grain Growth Maps of Wrought Ni-Base Superalloys
  9. Altmetric Badge
    Chapter 8 Alloy Design and Development of a Novel Ni-Co-Based Superalloy GH4251
  10. Altmetric Badge
    Chapter 9 Preferential γ′ Precipitation on Coherent Annealing Twin Boundaries in Alloy 718
  11. Altmetric Badge
    Chapter 10 Tailoring the γ-γ′-γʺ Dual Superlattice Microstructure of INCONEL ® 725 by High Temperature Aging and Nb/Ta Additions for Superior Creep Properties
  12. Altmetric Badge
    Chapter 11 Investigating Deformation Mechanisms in a Creep-Deformed 718-Variant Superalloy
  13. Altmetric Badge
    Chapter 12 Effect of Pre-straining on the Tensile and Stress-Rupture Properties of a Novel Ni-Co Based Superalloy
  14. Altmetric Badge
    Chapter 13 Effect of Short-Term Isothermal Exposure on the Ductility Signature of Waspaloy in the Temperature Range of 750–950 °C: A Comparison with Haynes ® 282 ®
  15. Altmetric Badge
    Chapter 14 Characterization of γ′ Precipitation Behavior in Additively Manufactured IN738LC Superalloy via In-Situ Small-Angle Neutron Scattering
  16. Altmetric Badge
    Chapter 15 Chemical Mapping of Superalloys at the Nanoscale
  17. Altmetric Badge
    Chapter 16 Compatibility of Wrought Superalloys with Supercritical CO 2
  18. Altmetric Badge
    Chapter 17 Effects of High-Temperature Oxidation on Fatigue Life of Additive-Manufactured Alloy 625
  19. Altmetric Badge
    Chapter 18 Long-Term Thermal Stability and Oxidation Resistance of HAYNES 233 Alloy
  20. Altmetric Badge
    Chapter 19 Subcritical Crack Growth of Alloy 718 in Marine Exposure Conditions and Microstructural Modeling
  21. Altmetric Badge
    Chapter 20 Hot Corrosion Behavior of a GH4720Li Disk Superalloy at 700 °C
  22. Altmetric Badge
    Chapter 21 Application of Computational Materials and Process Modeling to Current and Future Aero-Engine Component Development and Validation
  23. Altmetric Badge
    Chapter 22 Applied Calphad to Cast and Wrought Successors to IN718: A Physics-Based Approach with Implications for Phase Stabilities, Precipitation, and Microstructural Modeling
  24. Altmetric Badge
    Chapter 23 Multi-variate Process Models for Predicting Site-Specific Microstructure and Properties of Inconel 706 Forgings
  25. Altmetric Badge
    Chapter 24 Linking Stress-Rupture Properties to Processing Parameters of HAYNES ® 718 Nickel Superalloy Using Machine Learning
  26. Altmetric Badge
    Chapter 25 Competitor Ti-Comprising Refractory High Entropy Alloys to Superalloy 718 for Aeroengine Applications
  27. Altmetric Badge
    Chapter 26 An ICME Framework to Predict the Microstructure and Yield Strength of INCONEL 718 for Different Heat Treatments
  28. Altmetric Badge
    Chapter 27 Factors Influencing Propensity for Stress Relaxation Cracking in Inconel ® Alloy 740H ® and Practical Guidance for Applications
  29. Altmetric Badge
    Chapter 28 Mechanical and Microstructural Properties of Brazed Honeycomb Liner Material Haynes 214
  30. Altmetric Badge
    Chapter 29 Effect of Heat Treatment on the Mechanical Property and Deformation Mechanism of a Novel Cast Nickel-Based Superalloy
  31. Altmetric Badge
    Chapter 30 Microstructural Stability and Strengthening Mechanism of a Ferritic Fe–Cr–Ni–Al Superalloy Containing Cuboidal B2 Nanoparticles
  32. Altmetric Badge
    Chapter 31 Surface Roughness of Additively Manufactured IN718 and H282 Superalloys from Multi-size and Multi-laser Machines
  33. Altmetric Badge
    Chapter 32 Influence of Morphology and Size Distribution of Haynes 230 Particles on the Powder Spreading Behavior and Performance on Selective Laser Melting
  34. Altmetric Badge
    Chapter 33 Tensile Performance of Direct Energy Deposited IN718 and Oxide-Dispersed Strengthened IN718
  35. Altmetric Badge
    Chapter 34 Effects of Scan Strategy Induced Microstructural Differences on Thin-Wall SLM IN718 Fatigue Performance
  36. Altmetric Badge
    Chapter 35 Characterization of Laser Powder Bed Fusion of Nickel-Based Superalloy Haynes 282
  37. Altmetric Badge
    Chapter 36 Investigating the Influence of Build Parameters and Porosity on Fatigue of AM IN718
  38. Altmetric Badge
    Chapter 37 Correlating Alloy Inconel 718 Solidification Microstructure to Local Thermal History Using Laser Powder Bed Fusion Process Monitoring
  39. Altmetric Badge
    Chapter 38 Understanding Annealing Behavior During Post-Built Heat Treatment of Ni-Based Alloys Across Additive Manufacturing Processes
  40. Altmetric Badge
    Chapter 39 High-Temperature Properties of Alloy 718 Made by Laser Powder-Bed Fusion
  41. Altmetric Badge
    Chapter 40 Microstructure and Mechanical Properties of Selective Laser Melting Processed TiC/GTD222 Nickel-Based Composite
  42. Altmetric Badge
    Chapter 41 Fabrication and Weldability Aspects of Ni- and Ni–Fe Based Superalloys—A Review
  43. Altmetric Badge
    Chapter 42 Tensile Properties of Inconel 718 Produced by LMD-Wire
  44. Altmetric Badge
    Chapter 43 Microstructural and Tensile Properties Evolutions of Direct-Aged Waspaloy Produced by Wire Arc Additive Manufacturing
  45. Altmetric Badge
    Chapter 44 IN718 Cold Gas Repair Spray of Large Cavities—Microstructure and Residual Stresses
  46. Altmetric Badge
    Chapter 45 Design of Graded Transition Interlayer for Joining Inconel 740H Superalloy with P91 Steel Using Wire-Arc Additive Manufacturing
  47. Altmetric Badge
    Chapter 46 Microstructure Evolution During Post-heat Treatment of Haynes 282 Alloy Processed by Wire-Arc Additive Manufacturing
  48. Altmetric Badge
    Chapter 47 Characterization of the Anisotropic Behaviour of Inconel 718 Parts Manufactured by Wire Arc Additive Manufacturing
  49. Altmetric Badge
    Chapter 48 Keyhole TIG Welding of New Co-Lean Nickel-Based Superalloy G27
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
Summary X
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives
Published by
Springer Nature Switzerland, May 2023
DOI 10.1007/978-3-031-27447-3
ISBNs
978-3-03-127446-6, 978-3-03-127447-3
Editors

Ott, Eric A., Andersson, Joel, Sudbrack, Chantal, Bi, Zhongnan, Bockenstedt, Kevin, Dempster, Ian, Fahrmann, Michael, Jablonski, Paul, Kirka, Michael, Liu, Xingbo, Nagahama, Daisuke, Smith, Tim, Stockinger, Martin, Wessman, Andrew

View on publisher site
X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.

This page is provided by Altmetric.