↓ Skip to main content

Recent Trends in Materials

Overview of attention for book
Recent Trends in Materials
Springer Nature Singapore

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Computation of Properties for a Friction Stir Welded 6082 Aluminum Alloy Using Artificial Neural Network Model
  3. Altmetric Badge
    Chapter 2 Study of Frictional Force and Volumetric Wear Rate of T6 Heat Treated Hypereutectic Al–18Si–3.6Cu–0.36Ce Alloy
  4. Altmetric Badge
    Chapter 3 Phased Array Ultrasonic Evaluation for Defect Characterization in Aerospace Grade Maraging Steel MDN250 Weldments
  5. Altmetric Badge
    Chapter 4 Artificial Cells as Programmable, Micro-/Nano-structured Bio-materials
  6. Altmetric Badge
    Chapter 5 Biosynthesis of PHBs by the Method of Full-Factorial Design for Obtaining PHB/Magnetite Composites
  7. Altmetric Badge
    Chapter 6 Validation of the Experimental Results of the Concrete with M-sand Using ABAQUS Software
  8. Altmetric Badge
    Chapter 7 A Review on the Use of Industrial Waste and Agricultural Waste in the Production of Alkali-activated Concrete
  9. Altmetric Badge
    Chapter 8 Various Geometrical Parameters of the Topography Elements of the Honeycomb Films from PHB and Its Copolymer with 3-Hydroxyvalerate
  10. Altmetric Badge
    Chapter 9 Effect on Structural Characteristics After Adding Gypsum Wall Waste and Polymer
  11. Altmetric Badge
    Chapter 10 FEA of Femur Bone Implant of Calcium, PEEK, Ti–6Al–4V Alloy and 316L Steel
  12. Altmetric Badge
    Chapter 11 Literature Review in Artificial Neural Network for the Strength Calculation of Soil
  13. Altmetric Badge
    Chapter 12 Rheological and Tribological Characterization of Completely Biogenic Grease
  14. Altmetric Badge
    Chapter 13 Piezoelectric Energy Harvesting from Automotive Wheels
  15. Altmetric Badge
    Chapter 14 Modeling of Graphene Oxide Coated QCM Sensor for E-Nose Application
  16. Altmetric Badge
    Chapter 15 Low-Temperature Reduction Processing of Copper Slag
  17. Altmetric Badge
    Chapter 16 Dimensionless Bending Rigidity Ratio and Material Dependency of Microbeams with Size Effects
  18. Altmetric Badge
    Chapter 18 Characterization and Slurry Erosion Performance of Plasma Sprayed Ni–Al2O3 and Ni–TiO2–Al2O3 Coatings on Turbine Steel
  19. Altmetric Badge
    Chapter 19 On Complex Loading of Shell of Revolution
  20. Altmetric Badge
    Chapter 20 Analysis of Effect of Pitch Error on Transmission Error and Mesh Stiffness in Spur Gear Using SciLab and Ansys Software
  21. Altmetric Badge
    Chapter 21 On a Method of Calculating of Continua with an Initial Crack
  22. Altmetric Badge
    Chapter 22 Ultra-Broadband Absorber Based on Metasurfaces in the Infrared Regime
  23. Altmetric Badge
    Chapter 23 Analysis with Platinum for Optimized Performance of Perforated RF MEMS Switch
  24. Altmetric Badge
    Chapter 24 Analysis of Micro RF Switches Role in Reconfigurable Antenna Design
  25. Altmetric Badge
    Chapter 25 Analysis of Elevated Water Tank by Considering Slab, Wall, and Capacity in Seismic Zones
  26. Altmetric Badge
    Chapter 26 Analysis of Machining Parameters of Wire Electric Discharge Machining Process on Polysilicon Material
  27. Altmetric Badge
    Chapter 27 Gold/ZnO Interface-Based D-Shaped PCF Surface Plasmon Resonance Sensor with Micro-Openings, Analytic Designing, and Some Applications
  28. Altmetric Badge
    Chapter 28 Investigation of Micro-Cracks of Pure Titanium Using Wire Electric Discharge Machining (WEDM) Through Response Surface Methodology
  29. Altmetric Badge
    Chapter 29 Polarization-Independent Broadband Metasurface Absorber for Near Infrared Spectrum
  30. Altmetric Badge
    Chapter 30 Natural Frequency of Overhead Water Tanks Using Shaking Table
  31. Altmetric Badge
    Chapter 32 Performance Investigations of Partially Shaded Solar Photovoltaic Modules with Cell-Level Configurations
  32. Altmetric Badge
    Chapter 33 Biocompatibility of Poly(3-Hydroxybutyrate)/Nano-Magnetite Composite Material for Bone Tissue Engineering Applications
  33. Altmetric Badge
    Chapter 34 Angle Detection of Steering in a Self-Driving Car
  34. Altmetric Badge
    Chapter 35 Dielectric Properties of Barium Titanate Using Different Preparation Techniques
  35. Altmetric Badge
    Chapter 36 Modeling Effective Maintenance Strategy for Rotodynamic System Using RCM and AHP
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Recent Trends in Materials
Published by
Springer Nature Singapore, January 2022
DOI 10.1007/978-981-19-5395-8
ISBNs
978-9-81-195394-1, 978-9-81-195395-8
Editors

K. Geetha, Francisco M. Gonzalez-Longatt, Hui-Ming Wee

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.