↓ Skip to main content

Recent Advances in Thermofluids and Manufacturing Engineering

Overview of attention for book
Cover of 'Recent Advances in Thermofluids and Manufacturing Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Numerical Analysis of Gas Entrainment in the Viscous Liquid Pool Developed by a Counter-Rotating Pair of Fully Submerged Rollers
  3. Altmetric Badge
    Chapter 2 MHD Flow Measurements of Automatic Control Valve of Gas Turbine Engine Subject to Inclined Magnetic Field
  4. Altmetric Badge
    Chapter 3 Study of Laminar Flow Stagnation Problem for a Viscous Fluid with Transverse Magnetic Effect in Axial and Radial Directions
  5. Altmetric Badge
    Chapter 4 Analysis of Dufour and Soret Effect on Unsteady MHD Prandtl Fluid Flow Past an Expanding/Shrinking Surface
  6. Altmetric Badge
    Chapter 5 A Numerical Method to Analyze the Steady Conjugate Heat Transfer Around a Slab Suspended in Air
  7. Altmetric Badge
    Chapter 6 Low Reynolds Number Flow Past Array of Staggered Cylinders
  8. Altmetric Badge
    Chapter 7 Optimization in Fluid Mixing in Microchannels: A Review
  9. Altmetric Badge
    Chapter 8 A Simple Solution of Third Grade Fluid Flow Problem: Cascade-Forward Type ANN Approach
  10. Altmetric Badge
    Chapter 9 Formation and Development of Cusp-Induced Air Entrainment Caused by Fully Submerged Rotary Solid Roller: A Numerical Investigation
  11. Altmetric Badge
    Chapter 10 A Study on Stability Condition for an Inconsistent Formulation in High-Density Ratio Flow
  12. Altmetric Badge
    Chapter 11 Computational Modelling for Cyclone Separators Performance Evaluation
  13. Altmetric Badge
    Chapter 12 Computational Modeling of a Gas-Fired Walking Beam Reheat Furnace for Billet Heating and Scale Formation Prediction
  14. Altmetric Badge
    Chapter 13 Computational Study of Combustion Process in a Gas Turbine Engine
  15. Altmetric Badge
    Chapter 14 Effect of Diffuser, Rake, and Slant Angles on the Aerodynamics of a Simple Ahmed Body
  16. Altmetric Badge
    Chapter 15 Aerodynamic Cooling of Electronic Pin Fins
  17. Altmetric Badge
    Chapter 16 Design Analysis of a Blended Wing Body
  18. Altmetric Badge
    Chapter 17 Development of Rayleigh Taylor Instability at Various Atwood Numbers—A Review
  19. Altmetric Badge
    Chapter 18 Unstart Phenomenon in a Scramjet Engine Isolator
  20. Altmetric Badge
    Chapter 19 Efficacy of Pulsating Heat Pipe for Laptop Cooling Applications: An Experimental Investigation
  21. Altmetric Badge
    Chapter 20 Influence of Surface Unevenness on Enhancement of Heat Transfer During Saturated Pool Boiling of Acetone
  22. Altmetric Badge
    Chapter 21 Flow Characteristics of Electromagnetohydrodynamics of a Third-Grade Fluid Through Large Parallel Plates with Moving Upper Plate
  23. Altmetric Badge
    Chapter 22 Scaled Conjugate Gradient Algorithm Trained ANN for Parameter Retrieval in Combined Heat Transfer in Porous Ceramic Matrix
  24. Altmetric Badge
    Chapter 23 Design Optimization for Heat Transfer Through a Circular Pipe
  25. Altmetric Badge
    Chapter 24 Improvement of Heat Transfer by Natural Convection in a Three-Dimensional Square Cavity with a Heated Floor
  26. Altmetric Badge
    Chapter 25 Retrieval of Parameter in Combined Mode Conduction–Radiation Problem in Porous Ceramic Matrix by Artificial Neural Network
  27. Altmetric Badge
    Chapter 26 Effect of Compression Ratio on Performance, Combustion and Emission Characteristics of a Diesel Engine Fueled with Rubber Seed Biodiesel–Diesel Blends
  28. Altmetric Badge
    Chapter 27 Experimental Analysis on Combustion Characteristics of a DICI Engine Utilizing Argemone Biodiesel with Diesel Blend
  29. Altmetric Badge
    Chapter 28 Pyrolysis Characterization of Biomass Feedstock Using Thermogravimetric Analysis
  30. Altmetric Badge
    Chapter 29 The Effect of Varying Compression Ratio’s Upon Combustion and Performance Parameters of a TDI Diesel Engine
  31. Altmetric Badge
    Chapter 30 Performance of Solar Collector Coupled with Three Fluid Heat Exchanger and Heat Storage System for Simultaneous Water and Space Heating
  32. Altmetric Badge
    Chapter 31 Effect of Water Flow Rate and Temperature on Humidification and Cooling of Air in Air Washer
  33. Altmetric Badge
    Chapter 32 Modelling and Performance Simulation of a Solar Powered e-rickshaw Retrofit in the North East Region of India
  34. Altmetric Badge
    Chapter 33 Comparative Study of Performance and Emission of Biodiesel Produced from Water Hyacinth and Salvinia Molesta: A Critical Review
  35. Altmetric Badge
    Chapter 34 Design and Validation of Fault Ride Through Controller Design for Grid Connected Large Photovoltaic System
  36. Altmetric Badge
    Chapter 35 Design Development of a Heat Storage System at Small Scale for Solar Thermal Collectors
  37. Altmetric Badge
    Chapter 36 Structural, Morphological and Mechanical Property Analysis of TiAlN Thin Film Coating Deposited by CVD Technique
  38. Altmetric Badge
    Chapter 37 An Investigation on Turning of AISI 4340 Steel Using Innovative Eco-Friendly Cutting Fluids
  39. Altmetric Badge
    Chapter 38 Hot Corrosion Behaviour of Incoloy 800H Superalloy with Various Molten Salts Environment
  40. Altmetric Badge
    Chapter 39 Exploration of Material Removal Mechanism in Micro-Nano-Electrical Discharge Machining
  41. Altmetric Badge
    Chapter 40 Fabrication of Mechanical Barrier Using Waste Polymer and Wood Saw Dust and Turnings
  42. Altmetric Badge
    Chapter 41 Spinelization from Nitrate Precursors of Stoichiometric Ratio by Sol–gel Process Using Urea as Fuel
  43. Altmetric Badge
    Chapter 42 Effect of Three-Body Abrasion Wear Behavior on B 4 C/BN-reinforced Al6061 Alloy Fabricated Through Powder Metallurgy Method
  44. Altmetric Badge
    Chapter 43 Effect of Recast Layer Thickness of High-Carbon Alloy (EN-31) in Wire EDM Process by Varying Operating Parameters
  45. Altmetric Badge
    Chapter 44 Fabrication of Fly Ash-Based Refractory Brick Through Powder Metallurgy Technique
  46. Altmetric Badge
    Chapter 45 Turning Investigations of Al 7075 Alloy with ZrCN-Coated WC Inserts: Parametric Optimization and Cutting Temperature Prediction
  47. Altmetric Badge
    Chapter 46 Influence of Roughness on Micropolar Lubricated Finite Porous Journal Bearing
  48. Altmetric Badge
    Chapter 47 Parametric Optimization and Prediction of Material Removal Rate During Turning Al 7075 Alloy with ZrCN-Coated WC Inserts
  49. Altmetric Badge
    Chapter 48 Supply Chain Transformation Through Digital Servitization in Manufacturing Sector
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
1 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Recent Advances in Thermofluids and Manufacturing Engineering
Published by
Springer Nature Singapore, October 2022
DOI 10.1007/978-981-19-4388-1
ISBNs
978-9-81-194387-4, 978-9-81-194388-1
Editors

Revankar, Shripad, Muduli, Kamalakanta, Sahu, Debjyoti

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.