↓ Skip to main content

Advanced Manufacturing Processes IV

Overview of attention for book
Cover of 'Advanced Manufacturing Processes IV'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Mechatronic Transducer for Two-Level Adaptive Control of CNC Machines
  3. Altmetric Badge
    Chapter 2 Reverse Engineering and Design Process as Set of Procedures
  4. Altmetric Badge
    Chapter 3 Design Measures to Reduce Specific Loads on Support Surfaces of Slide Bearings
  5. Altmetric Badge
    Chapter 4 Automated Control of the Gear Profile for the Gerotor Hydraulic Machine
  6. Altmetric Badge
    Chapter 5 Non-circular Wheels from Congruent Arcs
  7. Altmetric Badge
    Chapter 6 Dynamics of Clamping Pneumatic Cylinder for Technological Equipment
  8. Altmetric Badge
    Chapter 7 Synthesis Structural Scheme Self-adjusting Floating Bollard Ship Gateway
  9. Altmetric Badge
    Chapter 8 An Increase in Heavy Machines’ Accuracy by Controlling the Carrier System Parameters
  10. Altmetric Badge
    Chapter 9 Dimensional Accuracy of Porous Structures Manufactured Using Air Controller
  11. Altmetric Badge
    Chapter 10 The Efficiency of Adaptive Slicing Group of Rationally Oriented Products for Layered Manufacturing
  12. Altmetric Badge
    Chapter 11 Optimal Conditions for Deformation of Stamping-Drawing Process from Aviation Materials
  13. Altmetric Badge
    Chapter 12 Manufacturing of the T-207 Prismatic Part Using Additive Manufacturing Technologies
  14. Altmetric Badge
    Chapter 13 Control of Thermomechanical Conditions for Working Surfaces of Products Made of Heterogeneous Materials at Finishing Operations
  15. Altmetric Badge
    Chapter 14 The Efficiency of Dynamic Vibration Dampers for Fine Finishing Boring
  16. Altmetric Badge
    Chapter 15 An Improved Model for Integrated Management Systems
  17. Altmetric Badge
    Chapter 16 Numerical Simulation of Grain Concentration Effect on Output Indicators of Diamond Grinding
  18. Altmetric Badge
    Chapter 17 Wave Nature of the Abrasive Granules Action on the Surface of Parts During Vibration Processing
  19. Altmetric Badge
    Chapter 18 Evaluation of a Decrease in Temperature Conditions upon Intermittent Grinding
  20. Altmetric Badge
    Chapter 19 Influence of Back Rake Angle of a Threading Cutter on the Drill-String Tool-Joint Pitch Diameter
  21. Altmetric Badge
    Chapter 20 Features of Deformation Mechanics in the Deformation Zone During Deforming Broaching of Cast Iron Workpieces
  22. Altmetric Badge
    Chapter 21 Numerical Simulation of Cutting Forces in Face Milling
  23. Altmetric Badge
    Chapter 22 Optimization of the Cutting Process Based on Thermophysical Characteristics
  24. Altmetric Badge
    Chapter 23 Method for Evaluating the Resource of Diffusion Coatings Under the Fatigue Conditions
  25. Altmetric Badge
    Chapter 24 Effect of Ti-Zr Ligature on Microstructure and Mechanical Properties of Automotive Silumin
  26. Altmetric Badge
    Chapter 25 Synthesis of Copper Nanoparticles on Graphite Using Transient Glow-to-Arc Discharge Plasma
  27. Altmetric Badge
    Chapter 26 Fatigue Strength of Steel Samples After Friction Treatment
  28. Altmetric Badge
    Chapter 27 New Complex Treatment to Ensure the Operational Properties of the Surface Layers of Machine Parts
  29. Altmetric Badge
    Chapter 28 Functional Evaluation of Surface Texture in Laser Selective Melted Inconel 718 Alloy Parts Processed by Shot Peening
  30. Altmetric Badge
    Chapter 29 Investigation of the Corrosion Resistance of Porous Permeable Materials with Protective Coatings
  31. Altmetric Badge
    Chapter 30 Influence of Drill Microgeometry on the Quality of the Machined Fiberglass Surface
  32. Altmetric Badge
    Chapter 31 A General Approach for Tolerance Control in Quality Assessment for Technology Quality Analysis
  33. Altmetric Badge
    Chapter 32 Application of Advanced Packaging Technology
  34. Altmetric Badge
    Chapter 33 The Advanced Technology of Economic Efficiency Evaluation
  35. Altmetric Badge
    Chapter 34 Modernization of the Internal Audit Process Using a Risk-Based Approach at an Industrial Enterprise
  36. Altmetric Badge
    Chapter 35 Improvement of Operational Parameters for High-Precision Tribosystems
  37. Altmetric Badge
    Chapter 36 The Taxonomy Approach for Engineering Students’ Outcomes Assessment
  38. Altmetric Badge
    Chapter 37 A Universal Quality Control System on Machine-Building Enterprises
  39. Altmetric Badge
    Chapter 38 Vibration Damping of Lifting Mechanisms
  40. Altmetric Badge
    Chapter 39 Failure Probability of Ship Diesel Parts Under Operating Conditions
  41. Altmetric Badge
    Chapter 40 Twisting Deformation of Thin-Walled Metal-Composite Rods
  42. Altmetric Badge
    Chapter 41 Dynamic Behavior of a Vibratory Plate Compactor Working on a Horizontal Elastic-Viscous-Plastic Surface
  43. Altmetric Badge
    Chapter 42 Analysis of CuZn5 Tube Buckling During Producing of the Crossover Bend for Metallurgical Unit
  44. Altmetric Badge
    Chapter 43 Stabilization of Natural Frequency Oscillation Equipment When Changing Its Weight
  45. Altmetric Badge
    Chapter 44 Wave Propagation Speed Analysis in Polyurethane Foams
  46. Altmetric Badge
    Chapter 45 A Method for Calculating the Strength Performance of Cast Parts
  47. Altmetric Badge
    Chapter 46 Lyapunov Function-Based Approach to Estimate Attractors for a Dynamical System with the Polynomial Right Side
  48. Altmetric Badge
    Chapter 47 Contact of a Ball Piston with a Running Track in a Hydrovolumetric Transmission Regarding the Elastic Properties of the Material
  49. Altmetric Badge
    Chapter 48 Sliding of a Particle on the Horizontal Plane Under Oscillating and Rotary Movements
  50. Altmetric Badge
    Chapter 49 Temperature Distribution in Parts of the Vehicle Disk Brake
  51. Altmetric Badge
    Chapter 50 Numerical Modeling of Point Defect Formation Processes During the Nuclear Power Plants Operation
  52. Altmetric Badge
    Chapter 51 The Changes in the Output Parameters of Planetary Hydraulic Machines with the Increase in the Gap Between Their Rotors
  53. Altmetric Badge
    Chapter 52 Improvement of Vortex Chamber Supercharger Performances Using Slotted Rectangular Channel
  54. Altmetric Badge
    Chapter 53 Failure Analysis of Refractories in Rotary Kilns
  55. Altmetric Badge
    Chapter 54 The Efficiency of Convective Heat Exchange at the Airflow of Metal Friction Elements of Brakes
  56. Altmetric Badge
    Chapter 55 Non-uniform Nanocapillary Fluid Cooling of the Drawworks’ Band-Shoe Brake Friction Couples
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
3 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advanced Manufacturing Processes IV
Published by
Springer International Publishing, September 2022
DOI 10.1007/978-3-031-16651-8
ISBNs
978-3-03-116650-1, 978-3-03-116651-8
Editors

Tonkonogyi, Volodymyr, Ivanov, Vitalii, Trojanowska, Justyna, Oborskyi, Gennadii, Pavlenko, Ivan

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.