↓ Skip to main content

Proceedings of the 75th RILEM Annual Week 2021

Overview of attention for book
Cover of 'Proceedings of the 75th RILEM Annual Week 2021'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Freeze Thaw Resistance of Non-ferrous Slag Concrete
  3. Altmetric Badge
    Chapter 2 Investigating Supplementary Cementing Materials for Alkalis and Pore Fluid Properties
  4. Altmetric Badge
    Chapter 3 Calcination and Reactivity of Marlstones: A Comparison Between Palygorskite and Smectite Bearing Marlstones
  5. Altmetric Badge
    Chapter 4 Effect of the Formulation on the Hydric and Mechanical Properties of Flax Concrete: Comparison with Hemp Concrete
  6. Altmetric Badge
    Chapter 5 Hydration Characteristics of Cementitious Paste with Low Grade Limestone
  7. Altmetric Badge
    Chapter 6 The Resistance of Composite Cement Paste with Calcined Diatomite to Chloride Attack
  8. Altmetric Badge
    Chapter 7 Co-activation of Blended Blast Furnace Slag and Fly Ash with Sodium Sulfate and Hydroxide
  9. Altmetric Badge
    Chapter 8 Going Below 50% Clinker Factor in Limestone Calcined Clay Cements (LC 3 ): A Comparison with Pozzolanic Cements from the South American Market
  10. Altmetric Badge
    Chapter 9 Microstructure and Durability Properties of Concretes Based on Oyster Shell Co-products
  11. Altmetric Badge
    Chapter 10 Correlation Between the Reactivity of Supplementary Cementitious Materials and Their Efficacy to Prevent Alkali-Silica Reaction
  12. Altmetric Badge
    Chapter 11 Water Absorption by Capillarity, Physical and Mechanical Properties of Concrete Containing Recycled Concrete Aggregate with Partial Cement Replacement by Metakaolin
  13. Altmetric Badge
    Chapter 12 Evaluation of the Potential of Single-Wall Carbon Nanotubes in Improving the Properties of Cement-Composites
  14. Altmetric Badge
    Chapter 13 Simulating the Hydration Process of Low Water to Cement (w/c) Ternary Pastes Incorporating Superabsorbent Polymers (SAP)
  15. Altmetric Badge
    Chapter 14 Study of the Pozzolanic Reactivity of Amazonian Metakaolin for Use as a Supplementary Cementitious Material
  16. Altmetric Badge
    Chapter 15 Evaluation of the Mechanical and Chemical Performance of Mortar Calcined Sludge at 600 ℃ and Nitrophosphogypsum for Its Application in Construction
  17. Altmetric Badge
    Chapter 16 Supplementary Cementitious Materials Reactivity: From Model Systems to Concrete
  18. Altmetric Badge
    Chapter 17 Experimental Studies on the Mechanical Properties of Concrete Made up with Processed GGBS
  19. Altmetric Badge
    Chapter 18 Effect of Mineral Addition LC2 on Shrinkage Produced in Concrete
  20. Altmetric Badge
    Chapter 19 Formulation of Expansive Mortars Based on Calcareous-Based Additives and Ternary Cement with Calcined Clay and Limestone
  21. Altmetric Badge
    Chapter 20 Data Mining Strategies to Handle State of Art Knowledge on Self-healing Capacity of Cementitious Materials
  22. Altmetric Badge
    Chapter 21 Carbonation Results in Diverse Cement Pastes with 10% Substitution of Binder by Bentonite
  23. Altmetric Badge
    Chapter 22 Expanded Clay as Bacteria Cells Protector in Manufacturing Self-healing Mortar: The Possibility of Adding Less Nutrient to Maintain the Mechanical Properties of Mortar
  24. Altmetric Badge
    Chapter 23 Comparative Life Cycle Assessment of Concrete with Coarse Natural and Recycled Concrete Aggregates for Household Construction, Case Study in the Hamburg Area
  25. Altmetric Badge
    Chapter 24 Deformations in Pastes During Capillary Imbibition and Their Implications
  26. Altmetric Badge
    Chapter 25 Repair of Concrete in Environments with Chlorides or Subjected to Freeze-Thaw Scaling
  27. Altmetric Badge
    Chapter 26 Influence of Self-healing via Embedded Macrocapsules Filled with Polyurethane on Carbonation of High-Volume Fly Ash Mortar
  28. Altmetric Badge
    Chapter 27 Reliability Analysis for Service Life of Concrete Structures Subject to Various Carbon Dioxide Concentrations
  29. Altmetric Badge
    Chapter 28 Durability Analysis of Ultra High-Performance Fiber Reinforced Concrete Structures in Cracked Serviceability Limit State
  30. Altmetric Badge
    Chapter 29 Investigating the Use of Off-Specification Ashes to Prevent Alkali-Silica Reaction
  31. Altmetric Badge
    Chapter 30 A Review on Durability Performance of Calcined Clay Binders for Adoption in the Construction Industry
  32. Altmetric Badge
    Chapter 31 Estimating Service Life of Prestressed Concrete Systems Exposed to Chlorides
  33. Altmetric Badge
    Chapter 32 Relationship Between the Vertical Profile of Marine Aerosol Salinity and the Chloride Accumulation into Concrete
  34. Altmetric Badge
    Chapter 33 Effect of Size and Preconditioning of Concrete Cores Against Sulfate Attack (Test)
  35. Altmetric Badge
    Chapter 34 CFRP Reinforcement for Historical Buildings at Mexico City: Concrete Frame Structures Around 1940 to 1960
  36. Altmetric Badge
    Chapter 35 Role of Oxygen and Humidity in the Reinforcement Corrosion
  37. Altmetric Badge
    Chapter 36 Experimental Investigation on the Influence of Partial Immersion and Drying Cycles on Hemp Concrete Properties
  38. Altmetric Badge
    Chapter 37 Sustainability and Economic Viability of Self-healing Concrete Containing Super Absorbent Polymers
  39. Altmetric Badge
    Chapter 38 Self-healing Capabilities of Ultra-High Performance Fiber Reinforced Concrete with Recycled Aggregates
  40. Altmetric Badge
    Chapter 39 Environmental Impact of Calcium Sulfoaluminate Cement Manufacturing: An Indian Case Study
  41. Altmetric Badge
    Chapter 40 Sustainability Assessment of Concrete Pavements with Recycled Concrete Aggregate
  42. Altmetric Badge
    Chapter 41 Characterization and Economic Viability of Local Sugarcane Bagasse Ash as Partial Replacement of Portland Cement
  43. Altmetric Badge
    Chapter 42 Effect of Combined Action of Carbonation and Bending Load on Mortar
  44. Altmetric Badge
    Chapter 43 Concrete Beams with Steel Reinforcement Subjected to Fractions of Yielding Strength Under Accelerated Corrosion Tests
  45. Altmetric Badge
    Chapter 44 Electrochemical Behaviour of Steel Embedded in Alkali Activated Metakaolin/Limestone Based Mortar
  46. Altmetric Badge
    Chapter 45 Additive Manufacturing in Architecture: 3D Printing Solutions for Vaulted Spaces
  47. Altmetric Badge
    Chapter 46 Understanding the Structural Build-Up Rate of Cementitious Materials for 3D-Printing
  48. Altmetric Badge
    Chapter 47 Interlayer Bond and Porosity of 3D Printed Concrete
  49. Altmetric Badge
    Chapter 48 Adhesion Performance of Cement-Based Materials in the Fresh State
  50. Altmetric Badge
    Chapter 49 A Study of Early Age Shear Properties of 3D Printable Cementitious Mixes with Fiber Reinforcements
  51. Altmetric Badge
    Chapter 50 Influence of Crystalline Admixtures and Bacteria on the Fresh Properties of Self-healing Concrete
  52. Altmetric Badge
    Chapter 51 Novel Compressive Constitutive Model for 3D Printed Concrete
  53. Altmetric Badge
    Chapter 52 Effect of Nano-additives and Polymeric Viscosity Modifying Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
  54. Altmetric Badge
    Chapter 53 Shrinkage-Cracking Prevention in Large-Scale Concrete Structures by Means of Superabsorbent Polymers (SAPs)
  55. Altmetric Badge
    Chapter 54 Effect of Artificial Lightweight Aggregates on Interfacial Transition Zone in Concrete
  56. Altmetric Badge
    Chapter 55 Durability Design and Quality Control/Assurance During Construction of Concrete Structures
  57. Altmetric Badge
    Chapter 56 Flexural Behavior of Reinforced Concrete Beams Made with Recycled Concrete Aggregates
  58. Altmetric Badge
    Chapter 57 Analysis of Design Constitutive Model for Macro-synthetic Fibre Reinforced Concrete Through Inverse Analysis
  59. Altmetric Badge
    Chapter 58 Mechanical Properties of Fiber Reinforced Concrete at Low Temperatures
  60. Altmetric Badge
    Chapter 59 Finite Element Analysis Characterization of Macro Synthetic Fibre Reinforced Concrete Constitutive Equation
  61. Altmetric Badge
    Chapter 60 A Discussion on the Reliability of prEN1992-1-1:2021 Shear Strength Provisions for Fibre Reinforced Concrete Members Without Shear Reinforcement
  62. Altmetric Badge
    Chapter 61 Analytical Determination of Flexural Resistance of Rein-forced Concrete Beams with Corrosion
  63. Altmetric Badge
    Chapter 62 Analysis of Shear Panel Elements Using Improved Fixed Strut Angle Model Based on Plane-Stress Element
  64. Altmetric Badge
    Chapter 63 Feasibility Study of One-Part Alkali Activated Material with MSWI Fly Ash
  65. Altmetric Badge
    Chapter 64 Effect of the Limestone Content on the Durability of Alkali-Activated Limestone-Metakaolin Subjected to Acidic and Sulfate Environments
  66. Altmetric Badge
    Chapter 65 Water Transport Properties of Hybrid Binder Concrete Containing Activated Copper Slag and Recycled Concrete Aggregate
  67. Altmetric Badge
    Chapter 66 Early Age Properties of Paste and Mortar Made with Hybrid Binders Based on Portland Cement, GGBFS and Sodium Sulfate
  68. Altmetric Badge
    Chapter 67 Review and Experimental Investigation of Retarder for Alkali-Activated Cement
  69. Altmetric Badge
    Chapter 68 Sustainable Cements: Hybrid Alkaline Cements Overview
  70. Altmetric Badge
    Chapter 69 One Part Blast-Furnace Slag Cements Activated with a Blend of MgO-Na 2 SO 4
  71. Altmetric Badge
    Chapter 70 Blended Limestone-Portland Cement Binders with Low Amounts of 2 Powdered Sodium Silicates
  72. Altmetric Badge
    Chapter 71 Hydraulic Pastes of Alkali-Activated Waste Glass and Limestone Cement Using in Situ Caustification
  73. Altmetric Badge
    Chapter 72 RILEM TC 281-CCC Working Group 6: Carbonation of Alkali Activated Concrete—Preliminary Results of a Literature Survey and Data Analysis
  74. Altmetric Badge
    Chapter 73 Alkali Binder Based on Waste Glass and Limestone
  75. Altmetric Badge
    Chapter 74 Materials Characterization and Compressive Strength of Compressed Earth Blocks Reinforced with Oat Straw
  76. Altmetric Badge
    Chapter 75 How Different is the Deteriorating Mechanism of Fired Clay Bricks Due to NaCl Salt Compared to the Highly Damaging Na 2 SO 4 ?
  77. Altmetric Badge
    Chapter 76 Effect of Soil Characteristics on the Physico-mechanical Properties of Non-stabilized Compressed Earth Blocks
  78. Altmetric Badge
    Chapter 77 Salt Deterioration of Heritage Structures—Correlating the Insights from Field and Lab Studies
  79. Altmetric Badge
    Chapter 78 Durability of Heritage Masonry Structures: Review on the Substrate-Mortar Interaction
  80. Altmetric Badge
    Chapter 79 Mexico’s Caminos Reales (Royal Roads) Bridges: Location Based on Georeferencing Techniques
  81. Altmetric Badge
    Chapter 80 Towards Green Materials for Cultural Heritage Conservation: Sustainability Evaluation of Products for Stone Consolidation
  82. Altmetric Badge
    Chapter 81 Limestone Consolidation: How Much Product is Enough?
  83. Altmetric Badge
    Chapter 82 Effects of Steam-Slaking on the Characteristics of Lime from Three Different UK Manufacturers
  84. Altmetric Badge
    Chapter 83 A New Research Strategy in Studying and Improving the Bond Between Concrete and Repair Mortar
  85. Altmetric Badge
    Chapter 84 Ammonium Phosphate for “Green” Conservation of Cultural Heritage: 10 Years of Research in the Laboratory and in the Field
  86. Altmetric Badge
    Chapter 85 Characterization and Physical-Mechanical Properties of Adobes from La Huacana, Mexico
  87. Altmetric Badge
    Chapter 86 Conservation of Cultural Heritage Building: Evaluation of Ca[Zn(OH) 3 ] 2 ·2H 2 O Nanoparticles Coating Behavior Under Salt Crystallization Cycles
  88. Altmetric Badge
    Chapter 87 New Sensors for Moisture Monitoring in Historic Walls: Preliminary Results
  89. Altmetric Badge
    Chapter 88 Fresh Concrete Curing Monitoring Using Acoustic Emission
  90. Altmetric Badge
    Chapter 89 Crack Closure Assessment in Cementitious Mixtures Based on Ultrasound Measurements
  91. Altmetric Badge
    Chapter 90 Resistivity of Repair Materials for Concrete Repair Prior to the Application of a Cathodic Protection System
  92. Altmetric Badge
    Chapter 91 Non-destructive Tests for Estimating the Tensile Strength in Concrete with Deep Learning
  93. Altmetric Badge
    Chapter 92 A Combined Electrical and Electromechanical Impedance Study of Early-Age Strength Gain in Cement Mortars
  94. Altmetric Badge
    Chapter 93 Using Neutron Tomography to Study the Internal Curing by Superabsorbent Polymers in Cementitious Materials
  95. Altmetric Badge
    Chapter 94 Modular Lightweight Wastewater Treatment Plants Made of Textile Reinforced Concrete—Means to Reliable Wastewater Treatment in Rural Areas
  96. Altmetric Badge
    Chapter 95 Influence of Textile Orientation on the Quasi-static and Repeated Loading Behavior of Textile Reinforced Cementitious (TRC) Composites
  97. Altmetric Badge
    Chapter 96 Compressive Behaviour of Alkali Stabilized Quarry Sludge Blocks
  98. Altmetric Badge
    Chapter 97 Properties of Concrete with Thermo-mechanically Beneficiated Fine Recycled Aggregates
  99. Altmetric Badge
    Chapter 98 Bond-Behavior of Bamboo Strips and Bamboo/Wood Bio-Concretes
  100. Altmetric Badge
    Chapter 99 Controlled Microencapsulation of Rejuvenators by Jet Vibration to Promote Self-healing in Bituminous Materials
  101. Altmetric Badge
    Chapter 100 A Novel Spore-Based System with Rejuvenator Controlled Release for the Self-healing of Bituminous Materials
  102. Altmetric Badge
    Chapter 101 Permanent Deformation Characteristics of Hot Recycled Blends of Three Different RAP Sources
  103. Altmetric Badge
    Chapter 102 Influence of Treated Mixed Recycled Aggregates in Concrete Properties
  104. Altmetric Badge
    Chapter 103 Use of Corncob Granules as Sand Replacement in the Production of Cement Mortars
  105. Altmetric Badge
    Chapter 104 Properties of High-Performance Concrete with Coarse Recycled Concrete Aggregate for Precast Industry
  106. Altmetric Badge
    Chapter 105 Artificial Rocks Made from Dredged Sands of the Magdalen Islands (Canada): Preliminary Study
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
3 X users

Citations

dimensions_citation
1 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the 75th RILEM Annual Week 2021
Published by
Springer International Publishing, April 2023
DOI 10.1007/978-3-031-21735-7
ISBNs
978-3-03-121734-0, 978-3-03-121735-7
Editors

Escalante-Garcia, J. Ivan, Castro Borges, Pedro, Duran-Herrera, Alejandro

X Demographics

X Demographics

The data shown below were collected from the profiles of 3 X users who shared this research output. Click here to find out more about how the information was compiled.