↓ Skip to main content

Advances in Material Science and Engineering

Overview of attention for book
Cover of 'Advances in Material Science and Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Tig Welding of Dissimilar Steel: A Review
  3. Altmetric Badge
    Chapter 2 Development of a Parabolic Trough Solar Water Heater for Domestic Houses in Ongwediva
  4. Altmetric Badge
    Chapter 3 Design of Specimen Table for Laser Deposition Operation
  5. Altmetric Badge
    Chapter 4 Design of a Stacking System for a Small-Scale Warehouse
  6. Altmetric Badge
    Chapter 5 The Prospective Direction of Solar Energy in Namibia
  7. Altmetric Badge
    Chapter 6 Development of a Refrigeration System Test Rig
  8. Altmetric Badge
    Chapter 7 Scaling and Fouling of Reverse Osmosis (RO) Membrane: Technical Review
  9. Altmetric Badge
    Chapter 8 Design of a Fan Motor Lifting Mechanism for an Air-Cooled Condenser
  10. Altmetric Badge
    Chapter 9 Technical Review on Severe Plastic Deformation of Aluminium Series
  11. Altmetric Badge
    Chapter 10 Microstructural and Mechanical Properties of Friction Stir Welding of AZ91D
  12. Altmetric Badge
    Chapter 11 Microstructural and Mechanical Properties of Friction Stir Welding of AA1050
  13. Altmetric Badge
    Chapter 12 Total Productive Maintenance in Small and Medium-Sized Enterprises
  14. Altmetric Badge
    Chapter 13 Spark Plasma Sintering of Ceramic Matrix Composite of TiC: Microstructure, Densification, and Mechanical Properties: A Review
  15. Altmetric Badge
    Chapter 14 Thermal Performance Modelling of a Flat Bare Tube Bundle Under Deluging Cooling Conditions
  16. Altmetric Badge
    Chapter 15 Investigation of the Mechanical and Microstructural Properties of TIG Welded Ti6Al4V Alloy
  17. Altmetric Badge
    Chapter 16 Prediction of the Temperature Behaviour During Friction Stir Welding (FSW) Using Hyperworks ®
  18. Altmetric Badge
    Chapter 17 Investigation on Hybrid Geometric Modelling Construction for Core and Cavity of Injection Mould via CAD System
  19. Altmetric Badge
    Chapter 18 Cost of Equipment Failure Modelling as a Tool for Maintenance Strategy
  20. Altmetric Badge
    Chapter 19 Evaluation of Fracture Energy of Aluminium Alloy 1050-F and Carbon Steel EN - 3 (~1015) 0.15% C at Different Temperatures Gradient
  21. Altmetric Badge
    Chapter 20 The Optimization of the Surface Roughness of Milled Polypropylene + 60wt.% Quarry Dust Composite Using the Taguchi Technique
  22. Altmetric Badge
    Chapter 21 Balancing of the Production Line Process in the Manufacturing of the Hand Grinder
  23. Altmetric Badge
    Chapter 22 Evaluation on the Performance of Logistics Companies in Malaysia with TOPSIS Model
  24. Altmetric Badge
    Chapter 23 TRIZ Application: An Innovative Approach in Redesigning an Ergonomics Car Interior for Limbs Disabled
  25. Altmetric Badge
    Chapter 24 Evaluation on the Customer Satisfaction in Intercity Bus Transportation Using Analytic Hierarchy Process Model
  26. Altmetric Badge
    Chapter 25 Synthesis and Characterization of a Cellulose-Based Polymeric Surfactant Towards Applications in Enhanced Oil Recovery
  27. Altmetric Badge
    Chapter 26 Combined H 2 O and CO 2 Reforming of CH 4 Over Ca Promoted Ni/Al 2 O 3 Catalyst: Enhancement of Ni-CaO Interactions
  28. Altmetric Badge
    Chapter 27 Investigation on Bending Strength Between Different Designs of Pedicle Screw to Obtain an Optimum Design
  29. Altmetric Badge
    Chapter 28 Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications
  30. Altmetric Badge
    Chapter 29 Fire Resistance and Mechanical Properties of the Fire-Resistant Board
  31. Altmetric Badge
    Chapter 30 Fire-Resistant Properties of Green Intumescent Coating Incorporated with BioAsh for Steel Protection
  32. Altmetric Badge
    Chapter 31 New Mixing Method of Self-consolidating Concrete Incorporating of Silica Fume
  33. Altmetric Badge
    Chapter 32 Characteristics of Asymmetry Motion in the Axle Vertical Plane on the Dynamic Response of Railway Wagon
  34. Altmetric Badge
    Chapter 33 Design of a Walkway Using Renewable Energy Harvesters Within Pavement
  35. Altmetric Badge
    Chapter 34 Short Review on Silicone Rubber Based Composites as High Voltage Insulation Material
  36. Altmetric Badge
    Chapter 35 Co-pyrolysis of Empty Fruit Bunches with Palm Kernel Shell, Palm Leaves and Sawdust to Produce Fine Chemicals
  37. Altmetric Badge
    Chapter 36 Material Characterization of Linear Low Density Polyethylene Blended with Synthetic Fibers Using FTIR for Rotational Molding Process
  38. Altmetric Badge
    Chapter 37 Analysis of Spread Moored FPSO-Tanker Side-by-Side System with Offloading Operability
  39. Altmetric Badge
    Chapter 38 Stability and Thermal Conductivity Evaluation of Less Concentration Surfactant Wrapped Functionalized Graphene Dispersed in Ethylene Glycol
  40. Altmetric Badge
    Chapter 39 The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry
  41. Altmetric Badge
    Chapter 40 Influence of Graphene Nanoplatelets Loading into Physical and Morphological Characteristics of Polyaniline Nanocomposites
  42. Altmetric Badge
    Chapter 41 Evaluating the Impact Toughness of Mild Steel Welded Joint Using Taguchi Method in Automated Shielded Metal Arc Welding
  43. Altmetric Badge
    Chapter 42 The Influence of Electrode Parameters on the Size of Heat Affected Zone (HAZ) of Mild Steel Welded Joint Using Taguchi Technique in Automated Shielded Metal Arc Welding
  44. Altmetric Badge
    Chapter 43 The Optimization of Automated Based Shielded Metal Arc Welding Parameters on Welded Pool Geometry of Mild Steel Welded Joint Using Taguchi Technique
  45. Altmetric Badge
    Chapter 44 Optimization of Tensile Strength in Automated Shielded Metal Arc Welding Using Taguchi Technique
  46. Altmetric Badge
    Chapter 45 Study of Round and Square Mechanical Clinching Joint Strength for SPCC Steel and Aluminium Alloy 5052 Sheet Metal
  47. Altmetric Badge
    Chapter 46 Feasibility of Forming Aluminium-Polymer Clinched Joint with Round Grooved Clinch Set
  48. Altmetric Badge
    Chapter 47 Design for Multiple Life Cycles Support Tool
  49. Altmetric Badge
    Chapter 48 Photovoltaic Array Interconnection Optimization Based on Cloud Cover
  50. Altmetric Badge
    Chapter 49 Adaptive Solar Photovoltaic Method to Overcome Partial Shading Effect on Solar Photovoltaic System
  51. Altmetric Badge
    Chapter 50 Diffusion Coefficients Determination for Commercial Grade Perfume
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Material Science and Engineering
Published by
Springer Singapore, August 2021
DOI 10.1007/978-981-16-3641-7
ISBNs
978-9-81-163640-0, 978-9-81-163641-7
Editors

Awang, Mokhtar, Emamian, Seyed Sattar

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.