Advances in Fluid and Thermal Engineering

Table of Contents

1. Altmetric Badge
   Book Overview
2. Altmetric Badge
   Chapter 1 Numerical Investigation of Swirl and Tumble Motion in the Cylinder and Their Effect on Combustion of Gasoline–Methanol Blends in SI Engine
3. Altmetric Badge
   Chapter 2 An Experimental Analysis of the Thermal Performance of Solar Air Heater (SAH) Having Two Different Absorber Plate Along with (PCM)-Based Energy Storage
4. Altmetric Badge
   Chapter 3 Comparative Study of the Fluid Interface-Capturing High-Resolution Algebraic Schemes
5. Altmetric Badge
   Chapter 4 Performance Investigation of Atmospheric Water Generating Device for Hot and Humid Conditions
6. Altmetric Badge
   Chapter 5 Vortex Dynamics in Near Wake Region Behind a Triangular Cylinder at Intermediate Reynolds Number
7. Altmetric Badge
   Chapter 6 Numerical Study of Gas Turbine Type Continuous Combustion Unit Burning LPG Mixture
8. Altmetric Badge
   Chapter 7 Soot Formation Characteristics of Homogeneous Supercritical Fuel Spray of Dieseline Blend
9. Altmetric Badge
   Chapter 8 A Review on Thermal Barrier Coatings (TBC) Usage and Effect on Internal Combustion Engine
10. Altmetric Badge
    Chapter 9 Evaluation of Emission Characteristics of Diesel Engine Fueled with Blends of Biodiesel Obtained from Waste Sesame Oil and Its Blends with Pure Menthe Oil
11. Altmetric Badge
    Chapter 10 Liquid Film Thickness Measurement: A Critical Review
12. Altmetric Badge
    Chapter 11 Modelling and Simulation of Evaporation on Porous Surface
13. Altmetric Badge
    Chapter 12 Effect of Ageing on Emission Levels of a Gasoline Vehicle: A Case Study in Indian Context
14. Altmetric Badge
    Chapter 13 Comparison of Free Convection Around Heated Square Plate in a Square Enclosure Enclosing Air, Water, and Ag-Water Nanofluid
15. Altmetric Badge
    Chapter 14 Numerical Study of Heat Exchanger Having Protrusion and Dimple Roughened Conical Ring Inserts
16. Altmetric Badge
    Chapter 15 Futuristic Approaches of Low-Grade Industrial Waste Heat Recovery
17. Altmetric Badge
    Chapter 16 Generation of Temperature Profile by Artificial Neural Network in Flow of Non-Newtonian Third Grade Fluid Through Two Parallel Plates Under Noisy Data
18. Altmetric Badge
    Chapter 17 Impact of Thermal Contact Resistance on Thermal-Hydraulic Characteristics of Double Fin-and-Tube Heat Exchanger
19. Altmetric Badge
    Chapter 18 Heat Dissipation Characteristics of a FSAE Racecar Radiator
20. Altmetric Badge
    Chapter 19 Fabrication and Analysis of Evaporative Water Reclamation Plant Using Waste Water from Different Sources
21. Altmetric Badge
    Chapter 20 Techno-Economic Feasibility Analysis of Parabolic Solar Cooker in Tropical Environment of India
22. Altmetric Badge
    Chapter 22 CFD Analysis of Mixed Convection in an Enclosure with a Floor-Mounted Step-Like Heat Source
23. Altmetric Badge
    Chapter 23 An Experimental Study on Performance Parameters of Diesel Engine Fueled with Blends of Diesel Fuel and Linseed Biodiesel
24. Altmetric Badge
    Chapter 24 Study of Natural Convection Heat Transfer in a Closed Wall with Thermal Conditions
25. Altmetric Badge
    Chapter 25 CFD Analysis of Tube Type Heat Exchanger of a Split Air Conditioner
26. Altmetric Badge
    Chapter 26 Effect of Strip Orientations and Geometry on the Critical Heat Flux in Pool Boiling
27. Altmetric Badge
    Chapter 27 Effect of Velocity Variation on the Rate of Erosion Wear at the Elbow of the Slurry Pipe by Using CFD
28. Altmetric Badge
    Chapter 28 Computational Study of the Effect of Cold Orifice Dimension on the Temperature Variation in the Counter Flow Vortex Tube
29. Altmetric Badge
    Chapter 29 Modeling and Simulation of the Load Governing System of Steam Turbine
30. Altmetric Badge
    Chapter 30 Modeling and Optimization of Piezoelectric Energy Harvesting System Under Dynamic Loading
31. Altmetric Badge
    Chapter 31 Improving Physio-Chemical Properties of Biodiesel by Using Blending
32. Altmetric Badge
    Chapter 32 Slurry Pressure Drop Through Horizontal Mitre Pipe Bend Using CFD
33. Altmetric Badge
    Chapter 33 Development of Characteristic Equation for Evacuated Tubular Collector Under Constant Collection Temperature Mode of Operation
34. Altmetric Badge
    Chapter 34 Simulation Studies on the Transition from Simple Expansion Chamber Muffler to Tapered Expansion Chamber Muffler
35. Altmetric Badge
    Chapter 35 Comparison of Supersonic Flow Regime for Two Different Symmetric Biconvex Circular-Arc Aerofoil
36. Altmetric Badge
    Chapter 36 Effects of Surface Geometries and Fin Modifications on the Thermal Performance of Solar Air Heaters: A Review
37. Altmetric Badge
    Chapter 37 Numerical Modelling and Simulation of Wind Turbine Blade Aerofoil for Performance Enhancement
38. Altmetric Badge
    Chapter 38 Hydrophobicity Enhancement of Mesh-like Surface for Moist Air Condensation
39. Altmetric Badge
    Chapter 39 Studies on Flow Past Surface Cooled Circular Cylinder at Low Reynolds Number
40. Altmetric Badge
    Chapter 40 Design and Thermal Analysis of Pipe Insulation
41. Altmetric Badge
    Chapter 41 Efficiency Analysis of Aerospike Nozzle by Comparison with a de-Lavel Nozzle Using Computational Fluid Dynamics
42. Altmetric Badge
    Chapter 42 Vortex Formation in Liquid Columns During Draining: Influence of Drain Port Geometry
43. Altmetric Badge
    Chapter 43 A Study for the Effect of Antioxidant EDA and Aluminium Hydroxide Additives to Mitigate CO and NO x Emissions in Biodiesel–Diesel Blend Fuelled CI Engine
44. Altmetric Badge
    Chapter 44 Thermal Performance Optimization of Heat Pipe Using Taguchi Method
45. Altmetric Badge
    Chapter 45 Effects of Hybrid Nanofluids on the Thermal Performance of Heat Pipe: An Experimental Investigation
46. Altmetric Badge
    Chapter 46 Energy Saving Technique for Separation of a Fuel Additive
47. Altmetric Badge
    Chapter 47 Opportunities and Issues with Clean Renewable Energy Development in India: A Review
48. Altmetric Badge
    Chapter 48 A Review on Scramjet Engine
49. Altmetric Badge
    Chapter 49 Numerical Simulation of Ribbed Solar Air Heater
50. Altmetric Badge
    Chapter 50 The Coatings Developed by Thermal Spraying Technique for Hydroturbine Applications—A Brief Review
51. Altmetric Badge
    Chapter 51 Study on Tribological Behavior of HVOF Developed Coatings Especially for Hydroturbine Runner Application—A Concise Review
52. Altmetric Badge
    Chapter 52 Emission Characteristics of Renewable Diesel and Its Comparison with the Diesel Fuel on Single-Cylinder Diesel Engine
53. Altmetric Badge
    Chapter 53 Effect of Tyre Inflation Pressure on Fuel Consumption and Vehicle Handling Performance
54. Altmetric Badge
    Chapter 54 CFD Analysis on Aerodynamic Drag Reduction of Pickup Vehicles Using Rear Spoiler
55. Altmetric Badge
    Chapter 55 Simulation of Performance and Emission of SI Engine Fuelled with Ethanol–Gasoline Blend (E15)
56. Altmetric Badge
    Chapter 56 CFD Studies on the Modified Laparoscopic Instrument Used in Minimally Invasive Surgeries
57. Altmetric Badge
    Chapter 57 Study of Existing Systems to Control Inside Temperature of Car Compartment and Factors Influencing the Rise of Temperature Within the Car Compartment—A Review
58. Altmetric Badge
    Chapter 58 Air-Conditioning System in Surgical and Critical Care: A Review
59. Altmetric Badge
    Chapter 59 Static Analysis of Euler–Bernoulli Beam by Using Bond Graph
60. Altmetric Badge
    Chapter 60 Design Optimization and Computational Analysis of Heat Transfer Through IC Engine Fins
61. Altmetric Badge
    Chapter 61 Energy Utilization Reduction of Domestic Refrigerator Using Phase Change Materials
62. Altmetric Badge
    Chapter 62 Flutter and Modal Analysis of Gas Turbine Compressor Blades
63. Altmetric Badge
    Chapter 63 Biomass Thermochemical Processing in Fixed Bed Downdraft Gasifier: A Review
64. Altmetric Badge
    Chapter 64 Utilization of Nanofluids as Coolant—A Review
65. Altmetric Badge
    Chapter 65 Biodiesel in India—A Review
66. Altmetric Badge
    Chapter 66 Numerical Analysis of Turbulent Heat Exchanger Tube Using Novel Para-Winglet Tape
67. Altmetric Badge
    Chapter 67 Identification of Gas-Liquid Two-Phase Flow Patterns Using Various Experimental Techniques: A Review
68. Altmetric Badge
    Chapter 68 Fuzzy Grey Relational-Based Risk Analysis of Steam Generating Unit
69. Altmetric Badge
    Chapter 69 Development and Testing of Binary Organic Eutectic Mixture for Thermal Energy Storage
70. Altmetric Badge
    Chapter 70 A Review of Natural Gas—Diesel Dual Fuel Engines
71. Altmetric Badge
    Chapter 71 Effect of Wall Fin Aspect Ratio in a Suddenly Expanded Micro-Combustor
72. Altmetric Badge
    Chapter 72 Mathematical Modeling of Drying Kinetics of Garlic Clove in Forced Convection Evacuated Tube Solar Dryer
73. Altmetric Badge
    Chapter 73 Numerical Analysis of Regenerator for Pulse Tube Refrigerator
74. Altmetric Badge
    Chapter 74 Waste Heat Management in Hybrid Vehicles for Cabin Cooling
75. Altmetric Badge
    Chapter 75 Effect on Performance and Emission of IC Engine Using Mahua Oil and Yellow Grease—A Simulation-Based Study Using Diesel-RK
76. Altmetric Badge
    Chapter 76 Comparative CFD Analysis of Straight and Helical-Shaped Earth Air Pipe Heat Exchanger (EAPHE) System
77. Altmetric Badge
    Chapter 77 Application of Taguchi Method and ANOVA in Parameters Optimization for Fluidization Characteristic of Pine Needles in Fluidized Bed
78. Altmetric Badge
    Chapter 78 A Study on Agglomeration Behaviour of Cotton Stalk Under Fluidized Bed Conditions
79. Altmetric Badge
    Chapter 79 Effect of Fuel Composition on Thermoacoustic Instability in a Turbulent Combustor
80. Altmetric Badge
    Chapter 80 Experimental Investigation of Combustion Instability in Syngas Turbulent Combustor