↓ Skip to main content

Magnesium Technology 2023

Overview of attention for book
Cover of 'Magnesium Technology 2023'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Sustainable Domestic Manufacturing and Protecting IP in a Post AIA World
  3. Altmetric Badge
    Chapter 2 Reductant Considerations in Thermal Pathways to Primary Magnesium Metal Production: A Case for Aluminothermic Reduction
  4. Altmetric Badge
    Chapter 3 Metastable–Stable
  5. Altmetric Badge
    Chapter 4 Engineered Bioabsorption for Implant Applications
  6. Altmetric Badge
    Chapter 6 First-Principles Calculations and a Theoretical Model for Predicting Stacking Fault Energies in Common Ternary Magnesium Alloys
  7. Altmetric Badge
    Chapter 7 Microstructure Characteristics of Nucleation and Growth for the $$\left\{ {10\overline{1}1} \right\}$$ 10 1 ¯ 1 Twin in Mg Polycrystal via an Atomistic Simulation
  8. Altmetric Badge
    Chapter 8 Precipitation Behavior in Low-alloyed Mg–Ca–Zn Alloys
  9. Altmetric Badge
    Chapter 9 Multiscale, Multimodal Characterization of Recrystallized and Non-recrystallized Grains During Recrystallization in a Hot-Compressed Mg–3.2Zn–0.1Ca wt.% Alloy
  10. Altmetric Badge
    Chapter 10 Combined Effect of Alloying and Grain Size on the Deformation Behavior of Magnesium Alloys
  11. Altmetric Badge
    Chapter 11 Quantifying the Role of Coarse Intermetallic Particles on Twinning Behavior
  12. Altmetric Badge
    Chapter 12 Optimization of the Microstructure and Performance of Aluminum Alloy Cold Spray Coatings on Magnesium Alloy Substrates
  13. Altmetric Badge
    Chapter 13 Open-Air Plasma Assisted Si–O–C Layer Deposition on AZ91D Mg Alloy for Corrosion Mitigation
  14. Altmetric Badge
    Chapter 14 First-Principles Investigations into the Electrochemical Behavior of Mg-Based Intermetallics
  15. Altmetric Badge
    Chapter 15 Integrating Multimodal Corrosion with Correlative Microscopy Across Multiple Length Scales
  16. Altmetric Badge
    Chapter 16 Protective Micro-Arc Oxidation Surface Coating on AZ80 Forged Magnesium Alloy
  17. Altmetric Badge
    Chapter 17 Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring Tests
  18. Altmetric Badge
    Chapter 18 A Comparative Study About Hydroxyapatite Coated AZ31 and AZ91 Mg Alloys
  19. Altmetric Badge
    Chapter 19 In Situ Study of the Degradation Behaviour Under Load of Mg1.8Y0.6Zn(1Ag) Using Synchrotron Tomography
  20. Altmetric Badge
    Chapter 20 In Vitro Degradation of Magnesium Wire in Sternal-Closure-Like Conditions
  21. Altmetric Badge
    Chapter 21 Influence of Corrosion Extent on Residual Tensile Strength and Corrosion Fatigue Properties of an Mg−Y−Nd Alloy Characterized by μCT
  22. Altmetric Badge
    Chapter 22 Barrel Finishing of Magnesium Alloys
  23. Altmetric Badge
    Chapter 23 Effect of Minimum Quantity Lubrication on Machinability of Magnesium RZ5 Alloy: A Comparative Study
  24. Altmetric Badge
    Chapter 24 Influence of Preforging in Extrusion as Well as in Equal Channel Angular Pressing in EXtrusion (ECAPEX) on the Properties of Magnesium Rods
  25. Altmetric Badge
    Chapter 25 Microstructure and Properties of Wrought Mg–Gd–Y–Zn–Zr (VW94) Alloy
  26. Altmetric Badge
    Chapter 27 Solid-Phase Processing of Mg–Al–Mn–Ca for High Strength and Ductility
  27. Altmetric Badge
    Chapter 28 The Effects of Temperature and Strain Rate on the Tensile Behaviour of Die-Cast Magnesium Alloy AE44
  28. Altmetric Badge
    Chapter 29 The Mechanisms to Improve Creep Resistance in a Die-Cast MgREMnAl Alloy
  29. Altmetric Badge
    Chapter 30 Condensation Behavior of Magnesium in Horizontal Furnace in Argon and Vacuum by Inert Gas Condensation Method
  30. Altmetric Badge
    Chapter 31 Design of the Continuous Gravity-Driven Multiple-Effect Thermal System (G-METS) for Efficient Low-Cost Magnesium Recycling
  31. Altmetric Badge
    Chapter 32 Development of Compound Vertical Retort Technology for Magnesium Production and Its Application
  32. Altmetric Badge
    Chapter 33 Development of Magnesium-Strontium/Calcium (Mg-Sr/Ca)-Based Alloys with Improved Sinterability for Next-Generation Biomedical Implants
  33. Altmetric Badge
    Chapter 34 Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment
  34. Altmetric Badge
    Chapter 35 Processing Map and Performance of a Low-Cost Wrought Magnesium Alloy: ZAXEM11100
  35. Altmetric Badge
    Chapter 36 Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Mg-1.27Zn-0.75Gd-0.17Zr Alloy
  36. Altmetric Badge
    Chapter 37 Effect of Grain Size on Bio-corrosion Properties of AZ31 Magnesium Alloy
  37. Altmetric Badge
    Chapter 38 Hot Compression Processing Map and Microstructure Evolution of a Mg–Sn–Al–Zn–Mn Alloy
  38. Altmetric Badge
    Chapter 39 Mg 3 V 2 O 8 : A Promising Cathode Material for Aqueous Mg-ion Battery
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Magnesium Technology 2023
Published by
Springer Nature Switzerland, February 2023
DOI 10.1007/978-3-031-22645-8
ISBNs
978-3-03-122644-1, 978-3-03-122645-8
Editors

Barela, Steven, Leonard, Aeriel, Maier, Petra, Neelameggham, Neale R., Miller, Victoria M.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.