↓ Skip to main content
What is this page? Embed badge

Strain Hardening Cementitious Composites

Overview of attention for book
Cover of 'Strain Hardening Cementitious Composites'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Mechanical Performance of Strain Hardening Limestone Calcined Clay Cementitious Composites (SHLC4) Subject to Wet-Dry Cycles
  3. Altmetric Badge
    Chapter 2 The Use of Ultra-high Volume of Lime Stone Calcine Clay to Produce Basalt Fiber Reinforced Strain Hardening Cementitious Composites
  4. Altmetric Badge
    Chapter 3 Utilization of Artificial Geopolymer Aggregates in High-Strength Engineered Cementitious Composites (HS-ECC)
  5. Altmetric Badge
    Chapter 4 Engineered Geopolymer Composites (EGC) with Ultra-high Strength and Ductility
  6. Altmetric Badge
    Chapter 5 Developing CO 2 -Sequstrating Strain-Hardening Magnesia-Based Composite (SHMC) with Hybrid Synthetic-Natural Fibers
  7. Altmetric Badge
    Chapter 6 Fundamental Study on Mechanical Performances of FRCC Using Polypropylene Nanofibers
  8. Altmetric Badge
    Chapter 7 The Use of Strain Hardening Natural Fabric Reinforced Cement Based Composite Systems for Structural Applications
  9. Altmetric Badge
    Chapter 8 Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D-Printing Technology
  10. Altmetric Badge
    Chapter 9 SHCC Reinforced 3D Printed Concrete
  11. Altmetric Badge
    Chapter 10 Influence of Placing Thickness on Fiber Orientation and Bridging Law of FRCC
  12. Altmetric Badge
    Chapter 11 Comparison Between Experimentally Determined and Theoretical Fiber Orientation Distribution in Strain Hardening Cementitious Composites (SHCC)
  13. Altmetric Badge
    Chapter 12 A Depth-Dependent Fiber-Bridging Model to Predict the Tensile Properties Recovery Induced by the Self-healing of Strain-Hardening Cementitious Composites
  14. Altmetric Badge
    Chapter 13 MicroCT and 3D Image Processing and Analysis to Investigate Strain-Hardening Cement-Based Composites (SHCC)
  15. Altmetric Badge
    Chapter 14 A New Method to Quantitatively Characterize the Porosity of Fiber/Matrix Interfacial Transition Zone (ITZ) via Longitudinal Cross-Sections
  16. Altmetric Badge
    Chapter 15 Pull-Out Behavior of Single Fiber Embedded in Porosity Free Concrete(PFC)
  17. Altmetric Badge
    Chapter 16 Experimental Study on Bond-Slip Behavior of Steel Reinforcement in High-Strength Strain-Hardening Cementitious Composites (SHCC) Under Direct Tension
  18. Altmetric Badge
    Chapter 17 Crack Width Evaluation of DFRCC Members Reinforced with Braided AFRP Bar
  19. Altmetric Badge
    Chapter 18 Cracking Behaviour of Strain-Hardening Cementitious Composites (SHCC) Under Practical Creep Conditions
  20. Altmetric Badge
    Chapter 19 Influence of Loading Frequency and Force Level on the Cyclic Performance of Strain-Hardening Cement-Based Composites (SHCC)
  21. Altmetric Badge
    Chapter 20 A Novel Deep Learning Model for End-to-End Characterization of Thin Cracking in SHCCs
  22. Altmetric Badge
    Chapter 21 Parametric Modeling of Flexural Response of Sandwich Composites
  23. Altmetric Badge
    Chapter 22 Mix Optimisation and Bending Behaviour of Cement Composites Reinforced with 3D Textiles and Microfibres
  24. Altmetric Badge
    Chapter 23 Spacers for 3D Textiles as Reinforcement in Cement Composites: Influence on the Flexural and Cracking Behavior
  25. Altmetric Badge
    Chapter 24 Experimental Study on Autogenous Healing of Cracked SHCC Under Sustained Bending Loading
  26. Altmetric Badge
    Chapter 25 How Does Self-healing Under Sustained Loadings in Aggressive Water Affect the Constitutive Response of a UHPFRC?
  27. Altmetric Badge
    Chapter 26 Acoustic Emission Technique for Monitoring Healing Induced Recovery of Mechanical Properties (HIRMP)
  28. Altmetric Badge
    Chapter 27 Effects of Corrosion on Bond Behavior of Reinforcing Bar in Concrete and SHCC
  29. Altmetric Badge
    Chapter 28 Follow-Up Review of Early SHCC Applications in Japan
  30. Altmetric Badge
    Chapter 29 Strain-Hardening Cement-based Composites (SHCC) for Impact Strengthening of Buildings: Recent Advances in the DFG Research Training Group 2250
  31. Altmetric Badge
    Chapter 30 Repair of a Hydraulic Structure with Different Strain-Hardening Cement-Based Composites
  32. Altmetric Badge
    Chapter 31 Overlay of RC Bridge Deck Deteriorated by ASR Using an Ultra High Performance-Strain Hardening Cementitious Composite (UHP-SHCC)
  33. Altmetric Badge
    Chapter 32 Full-Scale Experiment of AFt-UHPFRC for Overlay of Bridge Deck
  34. Altmetric Badge
    Chapter 33 Characteristic of UHPFRC and New Applications
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
3 X users

Citations

dimensions_citation
1 Dimensions
Summary X Dimensions citations
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Strain Hardening Cementitious Composites
Published by
Springer International Publishing, February 2023
DOI 10.1007/978-3-031-15805-6
ISBNs
978-3-03-115804-9, 978-3-03-115805-6
Editors

Kunieda, Minoru, Kanakubo, Toshiyuki, Kanda, Tetsushi, Kobayashi, Koichi

View on publisher site
X Demographics

X Demographics

The data shown below were collected from the profiles of 3 X users who shared this research output. Click here to find out more about how the information was compiled.

This page is provided by Altmetric.