↓ Skip to main content

Advances in Materials and Manufacturing Engineering

Overview of attention for book
Cover of 'Advances in Materials and Manufacturing Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Impact Model for Grinding Process in the Framework of Sustainable Manufacturing
  3. Altmetric Badge
    Chapter 2 Execution Analysis of Vapor-Compression Refrigeration System Using R12, R134a, R290 and R600a as Working Medium
  4. Altmetric Badge
    Chapter 3 Design, Optimization and Analysis of Baja Suspension System Using Full Factorial Approach
  5. Altmetric Badge
    Chapter 4 Aerodynamic Analysis of a 3D Small Wind Turbine Blade Using NACA 63415 Aerofoil with MRF
  6. Altmetric Badge
    Chapter 5 Trends on the Abrasive Flow and Electric Discharge Machining of Polymer Matrix Composites
  7. Altmetric Badge
    Chapter 6 Influence of Process Variables on the Ultimate Tensile Strength of Friction Stir Welded AA6061 Matrix Composite
  8. Altmetric Badge
    Chapter 7 Mechanical Properties and Microstructural Characteristics of Friction Stir Welded Aluminium Matrix Composite
  9. Altmetric Badge
    Chapter 9 Influence of Honeycomb Core on Static and Vibration Responses of Sandwich Structures
  10. Altmetric Badge
    Chapter 10 Influence of Point Mass Over FGM Plate for Vibration Signature in Different Boundary Conditions Using FEA
  11. Altmetric Badge
    Chapter 11 Design and Development of Seed Metering Device Implemented in Power Tiller
  12. Altmetric Badge
    Chapter 12 Pareto Optimization and Metallurgical Characterizations of Dissimilar Friction Stir Welded AA6061–AA7075 Alloys
  13. Altmetric Badge
    Chapter 13 Emission Reduction in Four-Stroke S.I Engine Using EGR and Catalytic Converter
  14. Altmetric Badge
    Chapter 14 Experimental Analysis of Fuel Spray Impingement Against the Tip on the Performance of CI Engine
  15. Altmetric Badge
    Chapter 15 Solving the Flexible Job Shop Scheduling Problem Using an Effective Jaya Algorithm
  16. Altmetric Badge
    Chapter 16 Wear Analysis of Epoxy Resin Composites Reinforced with Seashell
  17. Altmetric Badge
    Chapter 17 A Brief Review: Study of Machinability Aspects of Hard Metals Using Micro Textured Inserts
  18. Altmetric Badge
    Chapter 18 Optimization of Process Parameters in EDM Using Standard Deviation and MOORA Method
  19. Altmetric Badge
    Chapter 19 Wear Behaviour and Mechanical Properties of AA2024/Al 2 O 3 /SiC/Gr HMMC Using Advanced Squeeze Casting Technique
  20. Altmetric Badge
    Chapter 20 Experimental Investigation on Machining Properties Carbon Fibre-Reinforced Epoxy Composites with the Addition of Nano SiC
  21. Altmetric Badge
    Chapter 21 Process Parameter Optimization Using TOPSIS for Electric Discharge Machining of Incoloy 800HT
  22. Altmetric Badge
    Chapter 22 Analysis on Thermal Properties of Polyethylene–Vinyl Acetate (PEVA) Matrix with Polytetrafluroethylene (PTFE) Particle-Reinforced Composites
  23. Altmetric Badge
    Chapter 23 A Study on Wire Electrical Discharge Machining Process Parameters and Performances
  24. Altmetric Badge
    Chapter 24 Investigation of Tensile and Morphological Properties of Kevlar/S-Glass/Jute Fibre-Reinforced Epoxy Hybrid Composite
  25. Altmetric Badge
    Chapter 25 Optimization of Roller Burnishing Parameters of Al(SiC)p Metal Matrix Composite with TiAlN-Coated Roller Using Response Surface Methodology
  26. Altmetric Badge
    Chapter 26 Optimization of Machining Parameters During Turning of AISI 316L Stainless Steel Under Nanocutting Fluid Environment
  27. Altmetric Badge
    Chapter 27 Surface Integrity Studies on WEDM of Magnesium Matrix Nano-SiC Reinforced Composites
  28. Altmetric Badge
    Chapter 28 Acoustic, Rheological and Optical Properties of Binary Mixtures of Aqueous Solutions of PEG 200—A Comparative Analysis
  29. Altmetric Badge
    Chapter 29 Comparative Analysis on Mechanical Properties of Luffa and Coconut Coir Fiber Reinforced Polyester Composites
  30. Altmetric Badge
    Chapter 30 Experimental Analysis on the Effect of Cu-ZSM5 on the Control of SI Engine Exhaust Emissions
  31. Altmetric Badge
    Chapter 31 Optimization of SI Engine Cycle with Variable Composition and Specific Heat
  32. Altmetric Badge
    Chapter 32 Experimental Studies on the Effect of Mixed Metal Oxide DeNo x Catalyst on the Control of CI Engine Exhaust Emission
  33. Altmetric Badge
    Chapter 33 Injection and Exhaust Gas Recirculation Strategies for Reducing Emissions of Cyclohexanol-Diesel Blends in CI Engine
  34. Altmetric Badge
    Chapter 34 A Brief Review: Study on Mechanical Properties of Polycarbonate with Different Nanofiller Materials
  35. Altmetric Badge
    Chapter 35 Determination of Impact and Hardness Properties of Neem-Kenaf Fiber Reinforced Polymer Composites
  36. Altmetric Badge
    Chapter 36 Study on Wear and Corrosion Behaviour of Aluminium Hybrid MMC
  37. Altmetric Badge
    Chapter 37 Effect of Pineapple/Coconut Sheath Fiber Reinforced with Polyester Resin Matrix on Mechanical and Microstructure Properties of Hybrid Polyester Composite
  38. Altmetric Badge
    Chapter 38 Chemical Treatment, Influence of Fiber Content, and Optimization of Hybrid Natural Fiber-Reinforced Composites
  39. Altmetric Badge
    Chapter 39 Intelligent Automatic Guided Vehicle for Smart Manufacturing Industry
  40. Altmetric Badge
    Chapter 40 Sensitivity Analysis for Welding Parameters in Dissimilar Friction Stir Welded Joints Using Response Surface Methodology
  41. Altmetric Badge
    Chapter 41 Experimental Investigation of Welding Parameters on Microhardness and Tensile Behaviour of Similar and Dissimilar Submerged FSWed Aluminium Alloy Joints
  42. Altmetric Badge
    Chapter 42 Study on the Influence of Nanosized Silica Reinforcement in Microrubber Blended Epoxy Carbon Composite Laminate Subjected Under Dynamic Mechanical Analysis
  43. Altmetric Badge
    Chapter 43 Moth-Flame Optimization Algorithm for Improving the Surface Roughness on FDM Processed Parts
  44. Altmetric Badge
    Chapter 44 Multi-response Optimization of AWJ Process Parameters in Cut Quality Characteristics of Hastelloy C-276
  45. Altmetric Badge
    Chapter 45 Application of Water Cycle Algorithm for Optimizing the PAC Process Parameters in Cutting Ti–6Al–4V Alloy
  46. Altmetric Badge
    Chapter 46 Butterfly Optimization Algorithm for Optimization of Roller Burnishing Process Parameters
  47. Altmetric Badge
    Chapter 47 Multi-objective Optimization of WEDM Process Parameters Using NSGA-II Algorithm
  48. Altmetric Badge
    Chapter 48 Water Quality Index and Correlation Study of Temple Ponds in Kanchipuram, Tamil Nadu, India
  49. Altmetric Badge
    Chapter 49 Comparative Corrosion Behaviour of Ferrous and Non-ferrous Metals in Bio-lubricant and Bio-diesel Environment
  50. Altmetric Badge
    Chapter 50 Multi-response Optimization and Mechanical Behaviour of Al–Cu/Al–Mg–Si Alloys by Dissimilar Friction Stir Welding
  51. Altmetric Badge
    Chapter 51 Tribological Behaviour of Al 7075 Alloy Reinforced with Nano-Alumina and Silicon Carbide Particulates
  52. Altmetric Badge
    Chapter 52 Optimization of Process Parameters on Sliding Wear Behavior of Aluminum 7075 Hybrid Nanocomposite Analyzed Using Desirability Approach-Part II
  53. Altmetric Badge
    Chapter 53 Investigation of Process Parameters on Sliding Wear Behaviour of Aluminium 7075 Hybrid Nanocomposite Analyzed Using Response Surface Methodology-Part I
  54. Altmetric Badge
    Chapter 54 Effect of Process Parameters on Drilling of Carbon Fiber Reinforced Polymers
  55. Altmetric Badge
    Chapter 55 An Experimental Study on Drilling of Titanium Alloy Using Taguchi-Based Fuzzy Logic Approach
  56. Altmetric Badge
    Chapter 56 Determination of Optimum Tensile Strength of Friction Stir Welded AA2219 Aluminum Alloys Using Taguchi's Method
  57. Altmetric Badge
    Chapter 57 Analysis of Thrust Force in Drilling of Titanium Alloy Using Taguchi's Method
  58. Altmetric Badge
    Chapter 58 RSM-Based Optimization of Process Parameters in Synthesis of Pentaerythritol Ester of Rapeseed Oil
  59. Altmetric Badge
    Chapter 59 Physical Characteristics of Keyhole in 316L Stainless Steel Joint During an Autogenous Pulsed Laser Beam Welding
  60. Altmetric Badge
    Chapter 60 Influence of Chemical Treatment on Natural Fibers: A Review
  61. Altmetric Badge
    Chapter 61 Optimization on Tribological Characteristics of Waste Ayurvedic Oil Blends as an Engine Lubricant Additive
  62. Altmetric Badge
    Chapter 62 Effect of MWCNT on Mechanical Properties of Glass-Jute Fiber Reinforced Nano Composites
  63. Altmetric Badge
    Chapter 63 Effect of Stacking Sequence on Mechanical Properties of MWCNT Filled Natural Fiber Reinforced Composites
  64. Altmetric Badge
    Chapter 64 Optimization of Effective Process Parameters During Pentaerythritol Ester Production Using Taguchi Technique
  65. Altmetric Badge
    Chapter 65 A Review on Ultrasonicated Transesterification Process
  66. Altmetric Badge
    Chapter 66 Tribological Investigation of Waste Plastic Oil-Based Methyl Ester Blended Synthetic Lubricant Using Four-Ball Tribometer
  67. Altmetric Badge
    Chapter 67 Mechanical Properties of Biodegradable Calotropis Gigantea–Jute Fibre Hybrid Composite
  68. Altmetric Badge
    Chapter 68 The Concept of Metamaterial Used for the Fabrication of Antenna
  69. Altmetric Badge
    Chapter 69 Modeling of Potentially Implementable Configurable Logic Block in Quantum Dot Cellular Automata for Nanoelectronic Device Architecture
  70. Altmetric Badge
    Chapter 70 Application of CuO Nanoparticles as Biodegradable Lubricant Additive for Domestic Refrigerator Compressors—An Experimental Investigation
  71. Altmetric Badge
    Chapter 71 Study on Emission Analysis of Tamarind-Based Ground-Level Pyrotechnics
  72. Altmetric Badge
    Chapter 72 Tribological Characteristics of Aluminum with Volumetric Fractions of Nano-Boron Nitride Composites
  73. Altmetric Badge
    Chapter 73 Powder Metallurgy Fabrication, Characterization and Wear Assessment of Al-BN-TiO 2 Composites
  74. Altmetric Badge
    Chapter 74 Optimization in Tribological Behaviour of Al-BN-TiO 2 Composites Using D-Optimal Method
  75. Altmetric Badge
    Chapter 75 Influence of Aroma Skin Reinforcement on Erosive Behavior of Polyester Composites
  76. Altmetric Badge
    Chapter 76 Optimization of Wear Reduction on Al–TiO 2 –Gr Powder Metallurgy Composites Using D-Optimal Method
  77. Altmetric Badge
    Chapter 77 Effect of Welding Speed on Advanced CMT-Welded AA 6061 Grade Aluminum Alloy Joints
  78. Altmetric Badge
    Chapter 78 Heat Transfer Analysis on Advanced CMT Welded Low Carbon Steel Joints
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
2 X users

Citations

dimensions_citation
1 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Materials and Manufacturing Engineering
Published by
Springer Singapore, October 2020
DOI 10.1007/978-981-15-6267-9
ISBNs
978-9-81-156266-2, 978-9-81-156267-9
Editors

Rajmohan, T., Palanikumar, K., Davim, J. Paulo

X Demographics

X Demographics

The data shown below were collected from the profiles of 2 X users who shared this research output. Click here to find out more about how the information was compiled.