↓ Skip to main content

Light Metals 2020

Overview of attention for book
Cover of 'Light Metals 2020'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Impacts of Mineralogy on Soluble Phosphorus Concentrations During Low Temperature Processing of Jamaican Bauxites
  3. Altmetric Badge
    Chapter 2 Effects of the Granular Properties of Bauxite Pisolithes on the Solid/Liquid Separation in Liquid Fluidized Beds of Classifiers
  4. Altmetric Badge
    Chapter 3 Mineralogical Assessment of the Solid Phase Obtained on Leaching of Brazilian Red Mud
  5. Altmetric Badge
    Chapter 4 Low-Quality Aluminum-Containing Raw Materials: Experience, Problems and Prospects
  6. Altmetric Badge
    Chapter 5 Inhibition of Kaolinite Dissolution in Bayer Liquor Through Lithium Addition
  7. Altmetric Badge
    Chapter 6 Ionic Effect of NaCl and KCl on the Flotation of Diaspore and Kaolinite Using Sodium Oleate as Collector
  8. Altmetric Badge
    Chapter 7 Quantifying the Effect of Seeds on Gibbsite Crystallization—Mathematical Modelling of Particle Size Distribution
  9. Altmetric Badge
    Chapter 8 Experimental Study on Flow Field Characteristics in Seed Precipitation Tank and Influence on Physical Properties of Al(OH) 3 Products
  10. Altmetric Badge
    Chapter 9 Application of Advanced Oxidative Process for Organic Compounds Removal from Bayer Liquor
  11. Altmetric Badge
    Chapter 10 A Review of Comprehensive Utilization of High-Iron Red Mud of China
  12. Altmetric Badge
    Chapter 11 Conversion Behavior of Iron-Containing Minerals in the Process of Dissolving High-Iron Bauxite by Starch Hydrothermal Method
  13. Altmetric Badge
    Chapter 12 Disc Magnetic Separator Applied to the Extraction of Magnetite in Bauxite Residue
  14. Altmetric Badge
    Chapter 13 Recovery of Iron from High-Iron Bayer Red Mud by Smelting Reduction
  15. Altmetric Badge
    Chapter 14 Bayer Process Towards the Circular Economy—Metal Recovery from Bauxite Residue
  16. Altmetric Badge
    Chapter 15 Bayer Process Towards the Circular Economy—Soil Conditioners from Bauxite Residue
  17. Altmetric Badge
    Chapter 16 Brazilian Bauxite Residue Physical–Chemical Characterization and Acidic Neutralization Potential
  18. Altmetric Badge
    Chapter 17 Effect of Concentrations and Pressures of CO 2 on Calcification–Carbonation Treatment of Bauxite Residue
  19. Altmetric Badge
    Chapter 18 Comprehensive Utilization of Red Mud Through the Recovery of Valuable Metals and Reuse of the Residue
  20. Altmetric Badge
    Chapter 19 A Review of Research on Alumina Extraction from High-Alumina Fly Ash and a New Method for Preparing Alumina by Electrotransformation
  21. Altmetric Badge
    Chapter 20 Effect of Sodium Alkali Concentration on Calcification–Carbonization Process
  22. Altmetric Badge
    Chapter 21 Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction
  23. Altmetric Badge
    Chapter 22 Molecular Dynamics Simulations of the Solidification of Pure Aluminium
  24. Altmetric Badge
    Chapter 23 Nanoindentation and Cavitation-Induced Fragmentation Study of Primary Al 3 Zr Intermetallics Formed in Al Alloys
  25. Altmetric Badge
    Chapter 24 In Situ Neutron Diffraction Solidification Analyses of Rare Earth Reinforced Hypoeutectic and Hypereutectic Aluminum–Silicon Alloys
  26. Altmetric Badge
    Chapter 25 Influence of TiB 2 Particles on Modification of Mg 2 Si Eutectic Phase in Al–Zn–Si–Mg–Cu Cast Alloys
  27. Altmetric Badge
    Chapter 26 A Statistical Analysis to Study the Effect of Silicon Content, Surface Roughness, Droplet Size and Elapsed Time on Wettability of Hypoeutectic Cast Aluminum–Silicon Alloys
  28. Altmetric Badge
    Chapter 27 Aluminum Trace Elements Analyses Using Epsilon 1 Meso EDXRF Technique
  29. Altmetric Badge
    Chapter 28 Effect of Cooling Rate During Solidification of Aluminum–Chromium Alloy
  30. Altmetric Badge
    Chapter 29 Effects of Si on the Electrical Conductivity, Microhardness, Microstructure and Hot Tearing of Al–0.8Fe–0.5Mg–0.4Ni Alloys
  31. Altmetric Badge
    Chapter 30 The Efficacy of Replacing Metallic Cerium in Aluminum–Cerium Alloys with LREE Mischmetal
  32. Altmetric Badge
    Chapter 31 Effects of Sc and Y on the As-Cast Microstructure of AA6086
  33. Altmetric Badge
    Chapter 32 Ternary Interactions and Implications for Third Element Alloying Potency in Al–Ce-Based Alloys
  34. Altmetric Badge
    Chapter 33 Development and Analysis of Al7075 Alloy Materials Using Press and Sinter Processing
  35. Altmetric Badge
    Chapter 34 Formation of Rare Earth Intermetallics in Al–Cu Cast Alloys
  36. Altmetric Badge
    Chapter 35 Retrogression Forming and Reaging of AA7075-T6 Alclad to Produce Stampings with Peak Strength
  37. Altmetric Badge
    Chapter 36 High Cycle Fatigue Properties of the Zr-Modified Al–Si–Cu–Mg Alloy at Elevated Temperatures
  38. Altmetric Badge
    Chapter 37 Effect of Mo on Elevated-Temperature Low-Cycle Fatigue Behavior of Al-Si 356 Cast Alloy
  39. Altmetric Badge
    Chapter 38 State Parameter-Based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-Alloys
  40. Altmetric Badge
    Chapter 39 Coarsening-Resistance of a Severely Deformed Al-0.2 wt% Sc Alloy
  41. Altmetric Badge
    Chapter 40 The Effect of Modified Strain-Induced Melt Activation (Modified SIMA) Process on the Microstructure and Mechanical Properties of Al-7Si Alloy
  42. Altmetric Badge
    Chapter 41 Effect of Mg on Flow Behavior of Al–Mg Alloys and Its Constitutive Modeling Using Finite Element Analysis
  43. Altmetric Badge
    Chapter 42 Influence of Thermal Treatment and Design Parameters on the Fatigue Life of Automotive Control Arm Fabricated from A357 Semi-solid Alloy
  44. Altmetric Badge
    Chapter 43 The Formation of Al 6 (Fe, Mn) Phase in Die-Cast Al–Mg Alloys
  45. Altmetric Badge
    Chapter 44 Spark Plasma Sintering of Graphene Nanoplatelets Reinforced Aluminium 6061 Alloy Composites
  46. Altmetric Badge
    Chapter 45 Effects of Mn and Mo Micro-additions on Al–Zr–Sc–Er–Si Mechanical Properties
  47. Altmetric Badge
    Chapter 46 Nanotreating High-Zinc Al–Zn–Mg–Cu Alloy by TiC Nanoparticles
  48. Altmetric Badge
    Chapter 47 Microstructure and Mechanical Response of an Artificially Aged Al–Mg–Si Alloy: Experiments and Modeling
  49. Altmetric Badge
    Chapter 48 Effect of Zn Additions on the Mechanical Properties of High Strength Al–Si–Mg–Cu Alloys
  50. Altmetric Badge
    Chapter 49 Utilization of 3D Printed Materials in Expendable Pattern Casting Process
  51. Altmetric Badge
    Chapter 50 Hemming Evolution of 6xxx Aluminum Alloys in the Course of Natural Aging Following the Continuous Annealing
  52. Altmetric Badge
    Chapter 51 The Effect of Deformation Mode and Microstructure on the IGC Susceptibility of Al–Mg–Si–Cu Alloys for Automotive Applications
  53. Altmetric Badge
    Chapter 52 Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP
  54. Altmetric Badge
    Chapter 53 Mechanical and Microstructural Behavior of Dissimilar AA2014-T6 and AA7075-T6 Aluminium Alloys Joined by Friction Stir Welding
  55. Altmetric Badge
    Chapter 54 High Strength Nanotreated Filler Material for TIG Welding of AA6061
  56. Altmetric Badge
    Chapter 55 Optimization of Thermo-Mechanical Processes of Continuous Casting Products Using High Magnesium Aluminum Alloys in Automotive Industry Applications
  57. Altmetric Badge
    Chapter 56 Plastic Flow of AA6013-T6 at Elevated Temperatures and Subsequent Reaging to Regain Full Strength
  58. Altmetric Badge
    Chapter 57 Influence of Chemical Composition and Pre-deformation on the Age-Hardening Response of Al-Mg-Si Alloys
  59. Altmetric Badge
    Chapter 58 Hot Deformation and Die-Quenching of 6000-Series Alloys—The Effect of Quench-Interruption Temperature
  60. Altmetric Badge
    Chapter 59 Descriptors and Predictors: New Tools for the Predictive Modelling of Production Paths and the Properties of Aluminum-Based End-Products
  61. Altmetric Badge
    Chapter 60 Effect of Extrusion Parameters on Microstructural and Mechanical Properties of EN AW 6063
  62. Altmetric Badge
    Chapter 61 Simulation Study on Equal Channel Right Angular Extrusion Process of Aluminum Alloy 6061
  63. Altmetric Badge
    Chapter 62 Characterization of Dynamic Material Property of AlSi10 Mg Aluminum Alloy Under High Strain Rate Compressive Loading
  64. Altmetric Badge
    Chapter 63 Current Efficiency for Direct Production of an Aluminium–Titanium Alloy by Electrolysis in a Laboratory Cell
  65. Altmetric Badge
    Chapter 64 Corrosion Inhibition Effect of Aloe Saponaria Gel on the Corrosion Resistance of Aluminum
  66. Altmetric Badge
    Chapter 65 Experimental Investigation of MgAl 2 O 4 Spinel Formation in Oxidation of Al–Mg Alloys
  67. Altmetric Badge
    Chapter 66 Impact of Dispersion Hardening by Alumina Nano Particles on Mechanical Properties of Al 1100
  68. Altmetric Badge
    Chapter 67 Investigation of Temperature Variation During Friction Drilling of 6082 and 7075 Al-Alloys
  69. Altmetric Badge
    Chapter 68 Study on the Anti-EMF of Al-Er Master Alloy Prepared by Er 2 O 3 as Erbium Source
  70. Altmetric Badge
    Chapter 69 Comparison Between Different Laminated Aluminum Busbars Expansion Joints in Terms of Mechanical Performance and Relative Costs
  71. Altmetric Badge
    Chapter 70 Demo Retrofit Study of a Chinese Inspired Cell Technology
  72. Altmetric Badge
    Chapter 71 Mass Transport by Waves on the Bath Metal Interface in Electrolysis Cell
  73. Altmetric Badge
    Chapter 72 Numerical Investigation of Flow Field Effect on Ledge Shape in Aluminum Reduction Cell by Coupled Thermo-Flow Model
  74. Altmetric Badge
    Chapter 73 Study of Heat Distribution Due to ACD Variations for Anode Setting
  75. Altmetric Badge
    Chapter 74 Anodic Incident Detection through Multivariate Analysis of Individual Anode Current Signals
  76. Altmetric Badge
    Chapter 75 Fault Detection and Diagnosis of Alumina Feeding System Using Individual Anode Current Measurement
  77. Altmetric Badge
    Chapter 76 Change of Anode Operation Pattern from Single to Double Staircase at Albras
  78. Altmetric Badge
    Chapter 77 An Advanced Nonlinear Control Approach for Aluminum Reduction Process
  79. Altmetric Badge
    Chapter 78 Model Based Approach for Online Monitoring of Aluminum Production Process
  80. Altmetric Badge
    Chapter 79 Predictive Analytics for Enhancing Productivity of Reduction Cells
  81. Altmetric Badge
    Chapter 80 Restart of Shutdown Pots: Troubles, Solutions and Comparison with Normal Pots to Improve Results
  82. Altmetric Badge
    Chapter 81 Electrochemical Behaviour of Cu-Al Oxygen-Evolving Anodes in Low-Temperature Fluoride Melts and Suspensions
  83. Altmetric Badge
    Chapter 82 Alumina Concentration Measurements in Cryolite Melts
  84. Altmetric Badge
    Chapter 83 The Influence of Polarisation on the Wetting of Graphite in Cryolite-Alumina Melts
  85. Altmetric Badge
    Chapter 84 Oxidation Study of Zinc Sulfite on the Removal of Sulfur Dioxide from Aluminum Electrolysis Flue Gas by Zinc Oxide
  86. Altmetric Badge
    Chapter 85 Electrolysis of Low-temperature Suspensions: An Update
  87. Altmetric Badge
    Chapter 86 Adapting Modern Industrial Operation Parameters in a Standardized Laboratory Cell for Measuring Current Efficiency for Aluminium Deposition: Unexpected Challenges and Lessons Learned
  88. Altmetric Badge
    Chapter 87 Aluminium Smelter Crust—Phase Distribution and Structure Analysis of Top Zone Layer
  89. Altmetric Badge
    Chapter 88 Influence of Anode Cover Material Particle Size Composition on Its Physical Property and Insulation Performance
  90. Altmetric Badge
    Chapter 89 Lab Scale Experiments on Alumina Raft Formation
  91. Altmetric Badge
    Chapter 90 Mass- and Heat Transfer During Dissolution of Alumina
  92. Altmetric Badge
    Chapter 91 The Rate of HF Formation During Addition of Alumina to NaF-AlF 3 Melts
  93. Altmetric Badge
    Chapter 92 Validation of the Gravimetric Method to Properly Follow Alumina Dissolution in Cryolitic Bath
  94. Altmetric Badge
    Chapter 93 Development of a Mathematical Model to Simulate Raft Formation
  95. Altmetric Badge
    Chapter 94 Efficient Alumina Handling
  96. Altmetric Badge
    Chapter 95 Status Analysis of Particle Size Distribution and Attrition Index of the Smelter Grade Alumina
  97. Altmetric Badge
    Chapter 96 The Effect of Hard Scale Deposition on the Wall Heat Flux of a Cold Finger
  98. Altmetric Badge
    Chapter 97 The Application of Intelligent Breaking and Feeding Technology for Aluminium Reduction Pot
  99. Altmetric Badge
    Chapter 98 Reducing the Carbon Footprint: Aluminium Smelting with Changing Energy Systems and the Risk of Carbon Leakage
  100. Altmetric Badge
    Chapter 99 Measurement System for Fugitive Emissions in Primary Aluminium Electrolysis
  101. Altmetric Badge
    Chapter 100 Validation of QCL CF 4 Gas Analyzer for Sensitivity and Selectivity
  102. Altmetric Badge
    Chapter 101 A Laboratory Study of the HF Generation Potential of Particulate Fluorides from Cell Emissions
  103. Altmetric Badge
    Chapter 102 Method Development to Estimate Total Low Voltage and High Voltage PFC Emissions
  104. Altmetric Badge
    Chapter 103 Update on SO 2 Scrubbing Applied in Primary Aluminium Smelters
  105. Altmetric Badge
    Chapter 104 Optimization of a Gas Treatment Center Equipped with Extended Surface Bag Filters
  106. Altmetric Badge
    Chapter 105 Update on the Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot
  107. Altmetric Badge
    Chapter 106 The Australian Energy Crisis, Its Impact on Domestic Aluminium Smelting and Potential Solutions
  108. Altmetric Badge
    Chapter 107 Recycling of the Flue Gas from Aluminium Electrolysis Cells
  109. Altmetric Badge
    Chapter 108 Utilization of Waste Heat for Pre-heating of Anodes
  110. Altmetric Badge
    Chapter 109 Toward Minimizing the of Co-evolution of PFC Emission in EGA Smelter
  111. Altmetric Badge
    Chapter 110 Development and Application of GP500+ Energy Saving Aluminum Reduction Cell
  112. Altmetric Badge
    Chapter 111 Hands-Free Casting at AMAG Casting GmbH—It Is Possible!
  113. Altmetric Badge
    Chapter 112 User-Friendly Surveillance Tools to Prevent Bleed-Out During Cast Start
  114. Altmetric Badge
    Chapter 113 Beryllium Reduction Potential in AlMg Cast Alloys
  115. Altmetric Badge
    Chapter 114 Accurate Real-Time Elemental (LIBS) Analysis of Molten Aluminum and Aluminum Alloys
  116. Altmetric Badge
    Chapter 115 Industrial Verification of Two Rotor Fluxing in Large Crucibles
  117. Altmetric Badge
    Chapter 116 Dynafeed: An Improved Crucible Transfer System
  118. Altmetric Badge
    Chapter 117 Metal Transfer from Furnace to Furnace—A Case Study
  119. Altmetric Badge
    Chapter 118 Heavily Loaded Areas in Aluminum Melting Furnaces and Possible Refractory Solutions
  120. Altmetric Badge
    Chapter 119 Mold Shape Control for Direct Chill Ingot Casting
  121. Altmetric Badge
    Chapter 120 Continuous Monitoring of Butt Curl Development During DC Casting—Development and Application
  122. Altmetric Badge
    Chapter 121 Constellium’s Mould Technology for Al Alloy Slab DC Casting
  123. Altmetric Badge
    Chapter 122 Fluid Flow Analyses and Meniscus Behavior During the Horizontal Single Belt Casting (HSBC) of Aluminum Alloy AA6111 Strips
  124. Altmetric Badge
    Chapter 123 Effect of Water Flow Distribution on the Performance of Aluminium Small-Form Ingot Chains
  125. Altmetric Badge
    Chapter 124 Small Scale Oxidation Experiments on AlMg Alloys in Various Gas Fired Furnace Atmospheres
  126. Altmetric Badge
    Chapter 125 Study of the Oxidation of an Al-5Mg Alloy in Various Industrial Melting Furnace Atmospheres
  127. Altmetric Badge
    Chapter 126 Batscan™, Constellium In-melt Ultrasonic Inclusion Detector: Industrial Performance
  128. Altmetric Badge
    Chapter 127 Benchmark and Practical Application of State of the Art Hydrogen Monitoring
  129. Altmetric Badge
    Chapter 128 Molten Aluminum Quality Evaluations for Thin Foil Products
  130. Altmetric Badge
    Chapter 129 Industrial Verification of One- and Two-Chamber Siphon Degassing
  131. Altmetric Badge
    Chapter 130 Evaluation of CFF and BPF in Pilot Scale Filtration Tests
  132. Altmetric Badge
    Chapter 131 Dynaprime Filtration Technology Experience at Alcoa Baie-Comeau
  133. Altmetric Badge
    Chapter 132 Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations
  134. Altmetric Badge
    Chapter 133 Impact of TiB 2 Particle Size Distribution on Grain Refining Effectiveness
  135. Altmetric Badge
    Chapter 134 Effect of Nucleant Particle Size Distribution on the Grain Refining Efficiency of 7xxx Alloys
  136. Altmetric Badge
    Chapter 135 Impact of Transition-Metal Elements on Grain Refiner Performance in AA6061
  137. Altmetric Badge
    Chapter 136 Application Ultrasonic Technology Processing for Aluminum Treatment While Casting Slabs on Industrial Equipment of UC RUSAL
  138. Altmetric Badge
    Chapter 137 Influence of Liquid Jet Stirring and In-Situ Homogenization on the Intermetallics Formation During DC Casting of a 6xxx Al Alloy Rolling Ingot
  139. Altmetric Badge
    Chapter 138 Digital Manufacturing for Foundries 4.0
  140. Altmetric Badge
    Chapter 139 Integrating Fluid Simulation with Virtual Die Casting Machine for Industry 4.0 and Operator Training
  141. Altmetric Badge
    Chapter 140 Numerical Simulation of Wire Rod Casting of AA1370 and AA6101 Alloys
  142. Altmetric Badge
    Chapter 141 Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips
  143. Altmetric Badge
    Chapter 142 Effect of Ultrasonic Treatment on the Eutectic Phase and Cu Content in the Al Matrix of Large-Scale 2219 Al Alloy Ingot
  144. Altmetric Badge
    Chapter 143 Influence of Alloying Additives on the Electrochemical Behavior of Cast Al-5Zn Alloys
  145. Altmetric Badge
    Chapter 144 Thermal Analysis and Microstructure of Al-12%Si-2.5%Cu-0.4%Mg Cast Alloy with Ce and/or La Rare Earth Metals
  146. Altmetric Badge
    Chapter 145 Numerical Simulation of Temperature Field in 6061 Aluminum Alloy Vertical Twin-Roll Casting Process
  147. Altmetric Badge
    Chapter 146 Constellium R&D Approach in Recycling, From Lab to Industrial Scale
  148. Altmetric Badge
    Chapter 147 Representative Sampling, Fractionation and Melting of Al-Scrap
  149. Altmetric Badge
    Chapter 148 Recycling of Aluminium from Mixed Household Waste
  150. Altmetric Badge
    Chapter 149 An Assessment of Recyclability of Used Aluminium Coffee Capsules
  151. Altmetric Badge
    Chapter 150 Fractional Solidification for Purification of Recycled Aluminium Alloys
  152. Altmetric Badge
    Chapter 151 A Rapid Method of Determining Salt Flux Melting Point and Composition
  153. Altmetric Badge
    Chapter 152 Recovery of Aluminium Metal Using Ultrasonic Technique and Production of Al–Si Hypereutectic Alloys from 6063 Alloy’s Black Dross Using Silicon Lumps and Flux
  154. Altmetric Badge
    Chapter 153 Automatic Skimming Procedure for Reducing Aluminium Losses and Maintaining the Uniform Quality of the Molten Metal
  155. Altmetric Badge
    Chapter 154 Evaluation of the Effect of CO 2 Cover Gas on the Rate of Oxidation of an AlMgSi Alloy
  156. Altmetric Badge
    Chapter 155 The Development of Anode Shape, Size and Assembly Designs—Past, Present and Future Needs
  157. Altmetric Badge
    Chapter 156 10 Years of Anode Research and Development: Alcoa and Université Laval Experience
  158. Altmetric Badge
    Chapter 157 Carbon Anode Raw Materials—Where Is the Cutting Edge?
  159. Altmetric Badge
    Chapter 158 Solids Flow Considerations and Their Impact in Smelter Carbon Plant Operations and Product Quality
  160. Altmetric Badge
    Chapter 159 How to Improve the Environmental Efficiency of the Hall-Heroult Process While Producing and Using Carbon Anodes
  161. Altmetric Badge
    Chapter 160 Trends in Anode Carbon Production Projects
  162. Altmetric Badge
    Chapter 161 Development of a Soft Sensor for Detecting Overpitched Green Anodes
  163. Altmetric Badge
    Chapter 162 Diffusion Measurements of CO 2 Within Carbon Anodes for Aluminium Smelting
  164. Altmetric Badge
    Chapter 163 Testing of SERMA Technology on Industrial Anodes for Quality Control for Aluminum Production
  165. Altmetric Badge
    Chapter 164 Modelling of Gas Injection on Anode Baking Furnace and Application to Operations
  166. Altmetric Badge
    Chapter 165 Higher Baking and Production Levels in Anode Baking Furnaces and Associated Challenges
  167. Altmetric Badge
    Chapter 166 Major Reconstruction of Central Casing of Open Top Baking Furnace with a View to Increase Its Lifespan and Reduce the Total Costs Comparing to Full Reconstruction
  168. Altmetric Badge
    Chapter 167 Regulation and Management of Anode Baking Furnace Production Cycle During Green Anode Crisis
  169. Altmetric Badge
    Chapter 168 Sustainable Spent Pot Line Management Guidance
  170. Altmetric Badge
    Chapter 169 Purification of Graphite by Thermal Vacuum Treatment of Spent Potlining
  171. Altmetric Badge
    Chapter 170 The LCL&L Process: A Sustainable Solution for the Treatment and Recycling of Spent Pot Lining
  172. Altmetric Badge
    Chapter 171 Experimental Study on the Collecting Agent for Spent Potlining Flotation Index Optimization
  173. Altmetric Badge
    Chapter 172 Environmental Benefits of Using Spent Pot Lining (SPL) in Cement Production
  174. Altmetric Badge
    Chapter 173 Characteristic Analysis of Hazardous Waste from Aluminum Reduction Industry
  175. Altmetric Badge
    Chapter 174 Energy Saving in Hall–Héroult Cell by Optimization of Anode Assembly Design
  176. Altmetric Badge
    Chapter 175 High Temperature Creep Behaviour of Carbon-Based Cathode Material for Aluminum Electrolysis
  177. Altmetric Badge
    Chapter 176 Redesigning of Current Carrying Conductor—The Energy Reduction Initiative in Low Amperage Hall-Héroult Cell
  178. Altmetric Badge
    Chapter 177 Ready-to-Use Cathodes for the Hall-Héroult Process
  179. Altmetric Badge
    Chapter 178 Mechanism Understanding of Sodium Penetration into Anthracite Cathodes: A Perspective from Diffusion Coefficients
  180. Altmetric Badge
    Chapter 179 Anhydrous Carbon Pellets—An Engineered CPC Raw Material
  181. Altmetric Badge
    Chapter 180 Influence of Particle Shape and Porosity on the Bulk Density of Anode Grade Petroleum Coke
  182. Altmetric Badge
    Chapter 181 An EXAFS and XANES Study of V, Ni, and Fe Speciation in Cokes for Anodes Used in Aluminum Production
  183. Altmetric Badge
    Chapter 182 Additive Selection for Coal Tar Pitch Modification in Aluminium Industry
  184. Altmetric Badge
    Chapter 183 Charcoal and Use of Green Binder for Use in Carbon Anodes in the Aluminium Industry
Attention for Chapter 21: Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction
Altmetric Badge

Mentioned by

twitter
6 X users

Readers on

mendeley
10 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction
Chapter number 21
Book title
Light Metals 2020
Published by
Springer, Cham, January 2020
DOI 10.1007/978-3-030-36408-3_21
Book ISBNs
978-3-03-036407-6, 978-3-03-036408-3
Authors

J. Stroh, D. Sediako, G. Byczynski, A. Lombardi, A. Paradowska, Stroh, J., Sediako, D., Byczynski, G., Lombardi, A., Paradowska, A.

X Demographics

X Demographics

The data shown below were collected from the profiles of 6 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 10 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 10 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 3 30%
Researcher 2 20%
Student > Bachelor 1 10%
Unknown 4 40%
Readers by discipline Count As %
Engineering 4 40%
Materials Science 2 20%
Unknown 4 40%