TMS 2014: 143 rd Annual Meeting

Table of Contents

1. Altmetric Badge
   Book Overview
2. Altmetric Badge
   Chapter 1 Preparation and Ultraviolet-Visible Absorption Property of AAO/Ni Composite Membranes
3. Altmetric Badge
   Chapter 2 Structure and magnetocaloric effect of Pr 2 Fe 17-x Al x
4. Altmetric Badge
   Chapter 3 High magnetic moment CoFe nanoparticles
5. Altmetric Badge
   Chapter 4 Structural and Magnetic properties of nanocrystalline Pr 2 Co 7 C x and Pr 2 Co 7 H y alloys
6. Altmetric Badge
   Chapter 5 TiO 2 Nanotubes Filled with NiFe 2 O 4 Quantum Dots or Ni-Fe Nanoalloy: Synthesis and Applications
7. Altmetric Badge
   Chapter 6 Optical and Magnetical Properties of FeCr 2 O 4 Nanopigments with Spinel Type Structure
8. Altmetric Badge
   Chapter 7 Fatigue Characteristics and Microstructures of Laser-and Non-Laser Welded Low-Cost Ti-4.5Al-2.5Cr-1.2Fe-0.1C for Use in Next Generation Aircrafts
9. Altmetric Badge
   Chapter 8 In-Situ Synthesis and Characterization of TiB 2 and Ti-Al-B Composites
10. Altmetric Badge
    Chapter 9 Analysis of Microstructural Inhomogeneities of Ti-Based Alloys Produced via Laser-Based Combinatorial Synthesis
11. Altmetric Badge
    Chapter 10 The Effect of Hydrogen on the Fracture Toughness of Ti-5Mo-5V-5Al-3Cr
12. Altmetric Badge
    Chapter 11 Protection of Ti-Alloys against High Temperature Environmental Attack by a Two Step Process, Aluminization + Fluorination
13. Altmetric Badge
    Chapter 12 Welding of Ti–6Al–4V in Air
14. Altmetric Badge
    Chapter 13 Grain Refinement in Ti-6Al-4V Alloy during Thermo-Mechanical Processing and Investigation of Flow Properties
15. Altmetric Badge
    Chapter 14 A Study on Microstructures and Hardening Behaviors of Ti-12.1Mo-1Fe Alloy
16. Altmetric Badge
    Chapter 15 Structure-Property Correlation in an Aircraft Sheet Metal Alloy Ti-15V-3Cr-3Al-3Sn
17. Altmetric Badge
    Chapter 16 An Examination of the Thermally Related Factors Influencing the Melting/Dissolution of Solids in Liquid Titanium
18. Altmetric Badge
    Chapter 17 On the Microstructure and Properties of the Ti-3Al-2.5V Alloy Obtained by Powder Metallurgy
19. Altmetric Badge
    Chapter 18 Mechanical Properties of Biomedical ß-Type Titanium Alloy with Rare-Earth Metal Oxide Particles Formed by Rare-Earth Metal Addition
20. Altmetric Badge
    Chapter 19 Effects of Rare Earth ER<Subscript>2</Subscript>O<Subscript>3</Subscript> on Microstructure and Mechanical Properties of Titanium Foams by Powder Metallurgy
21. Altmetric Badge
    Chapter 20 Effect of Low Dose Neutron Irradiation on Tensile Behavior of HT-9 Steel at Room Temperature
22. Altmetric Badge
    Chapter 21 Exploring Fission Enhanced Diffusion of Uranium in Uranium Dioxide Using Classical Molecular Dynamics Simulations
23. Altmetric Badge
    Chapter 22 Surface Stabilites and Helium Trapping of Nano-Sized Oxide Phases in Nano-Structured Ferritic Alloys: A First Principles Study
24. Altmetric Badge
    Chapter 23 Crystal Plasticity and Grain-Orientation-Dependent hkl -Lattice Strain in Polycrystalline SUS316
25. Altmetric Badge
    Chapter 24 Temporomandibular Joint Replacement: Past, Present and Future Material Considerations
26. Altmetric Badge
    Chapter 25 Fabrication of TiO 2 Nanotube Arrays Using 1,2-Propanediol Electrolyte for Application in Biomedical Implants
27. Altmetric Badge
    Chapter 26 Nitriding Behavior of Ti6A14V Alloy in Gas Atmosphere
28. Altmetric Badge
    Chapter 27 Endurance of Low-Modulus β-Type Titanium Alloys for Spinal Fixation
29. Altmetric Badge
    Chapter 28 Mechanical Performance of Different Nickel-Titanium Archwires Used in Dentistry
30. Altmetric Badge
    Chapter 29 Difference of Wear Behavior Between Ti-29Nb-13Ta-4.6Zr Alloy and Ti-6A1–4V Eli Alloy for Biomedical Applications
31. Altmetric Badge
    Chapter 30 Optimization of Anodization and Annealing Condition Enhances TiO 2 Nanotubular Surface Hydrophilicity
32. Altmetric Badge
    Chapter 31 The Optimum Preparation of WC-Co Composite Powders by Sol-Gel and Hydrogen Reduction
33. Altmetric Badge
    Chapter 32 Comparative Study on Tribological Behavior of Ti-6Al-7Nb and SS AISI 316L Alloys, for Total Hip Prosthesis
34. Altmetric Badge
    Chapter 33 Microstructural characterization of shape memory alloys on the atomic scale
35. Altmetric Badge
    Chapter 34 Stick Slip Response of Dislocation Core
36. Altmetric Badge
    Chapter 35 Linear Scaling DFT for defects in metals
37. Altmetric Badge
    Chapter 36 Implementation and Validation of a Multiphase Multigrain Model of Equiaxed Solidification
38. Altmetric Badge
    Chapter 37 Numerical Simulation of Macrosegregation with Multiphase Model and Non-Orthogonal Grids
39. Altmetric Badge
    Chapter 38 Automatic Differentiation for Numerically Exact Computation of Tangent Operators in Small- and Large-Deformation Computational Inelasticity
40. Altmetric Badge
    Chapter 39 Integrating Advanced Materials Simulation Techniques into an Automated Data Analysis Workflow at the Spallation Neutron Source
41. Altmetric Badge
    Chapter 40 A FEM-Based Inverse Calculation Method for Determination of Heat Transfer Coefficient in Liquid Quenching Process
42. Altmetric Badge
    Chapter 41 Crystal Plasticity Fem Study of The Effects of BW Hardening Model Parameters on Nano-Indentation Deformation Behaviour of Copper Single Crystal
43. Altmetric Badge
    Chapter 42 Development of an asymptotics-based numerical model for the formation and evolution of air gaps in the vertical continuous casting of alloys
44. Altmetric Badge
    Chapter 43 Discrete Element Simulation for Magnetic-Aligned Compaction of Magnetic Powders
45. Altmetric Badge
    Chapter 44 Numerical Determination of Secondary Arm Spacing of Fe-C as a Function of Cooling Rate and Local Solidiifcation Time
46. Altmetric Badge
    Chapter 45 Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification
47. Altmetric Badge
    Chapter 46 Development of Heusler-Type Fe 2 VAl Alloys for Thermoelectric Power Generation
48. Altmetric Badge
    Chapter 47 Investigation of Electrical Properties of CIGS Thin Films Derived by Sol-Gel Process
49. Altmetric Badge
    Chapter 48 The Influence of Thickness on the Optical Parameters of Thermally Evaporated CdS Thin Films
50. Altmetric Badge
    Chapter 49 Optical Parameters of Thermally Evaporated SnO 2 Thin Films
51. Altmetric Badge
    Chapter 50 Applications of Polymer Nanofibers in Bio-Materials, Biotechnology and Biomedicine: A Review
52. Altmetric Badge
    Chapter 51 Izod Impact Tests in Polyester Matrix Composites Reinforced with Malva Fibers
53. Altmetric Badge
    Chapter 52 Charpy Impact Tests in Epoxy Matrix Composites Reinforced with Malva Fibers
54. Altmetric Badge
    Chapter 53 Theoretical Study on the Interactions of Impurity Boron on Si(110) Surface with H + , OH − and O 2
55. Altmetric Badge
    Chapter 54 Numerical Simulation for the Splashing Behavior in an Oxygen Converter Process
56. Altmetric Badge
    Chapter 55 Effect of the Porosity on Compressive Properties of Porous Materials
57. Altmetric Badge
    Chapter 56 Modeling, statistical analyses and simulations of random items and behavior on material surfaces
58. Altmetric Badge
    Chapter 57 Development and Practice of Blast Furnace Physical Heat Index Model Based on the Hot Metal Silicon Content and Temperature Prediction Model
59. Altmetric Badge
    Chapter 58 Thermodynamic and Kinetic Modelling of a Bond Coat Alloy: Oxidation Induced Depletion and Its Effect on Microstructure and Material Behavior
60. Altmetric Badge
    Chapter 59 Influence Factors for Brittle-to-Ductile Transition in Twinned Copper
61. Altmetric Badge
    Chapter 60 Modeling and Simulation of Isothermal Reduction of a Single Hematite Pellet in Gas Mixtures of H 2 and CO
62. Altmetric Badge
    Chapter 61 Molecular Dynamics Modelling of Diffusional Formation of Titanium Carbide Clusters in Iron Matrix
63. Altmetric Badge
    Chapter 62 Thermodynamic and Crystallographic Analysis on Complex Inclusions in Ti Deoxidized Low Carbon Steel
64. Altmetric Badge
    Chapter 63 Compressed Sensing for Fast Electron Microscopy
65. Altmetric Badge
    Chapter 64 Applications of Wavelets in the Representation and Prediction of Transformation in Shape-Memory Polycrystals
66. Altmetric Badge
    Chapter 65 A Novel Method for Automated Quantification of Particles in Solidified Aluminium
67. Altmetric Badge
    Chapter 66 Analysis of the Microstructure and Properties of Friction stir Weld Zones in the Al 2139-T8 Alloy
68. Altmetric Badge
    Chapter 67 The Effect of Setting Velocity on the Static and Fatigue Strengths of Self-piercing Riveted Joints for Automotive Applications
69. Altmetric Badge
    Chapter 68 Effects of Microstructure on Deformation behaviour of AZ91D Cast Alloy
70. Altmetric Badge
    Chapter 69 Role of the Plastic Flow of the Matrix on Yielding and Void Evolution of Porous Solids
71. Altmetric Badge
    Chapter 70 Banding and Texture Formation in F.C.C. Polycrystals during Rolling Deformation
72. Altmetric Badge
    Chapter 71 Effect of Extrusion Speed on the Microstructures and Mechanical Properties of Ti-6Al-4V Alloy Prepared by Combining of Powder Compact Hot Pressing and Extrusion under Air
73. Altmetric Badge
    Chapter 72 Development of Low-Cost Powder Metallurgy Titanium Alloys by Addition of Commercial 430 Stainless Steel Powder
74. Altmetric Badge
    Chapter 73 Mechanical Properties of Ti-6Al-4V Rods Produced by Powder Compact Extrusion
75. Altmetric Badge
    Chapter 74 Chacterization of Cu Tube Filled with al Alloy Foam by Means of X-Ray Computer Tomography
76. Altmetric Badge
    Chapter 75 Effects of Electromagnetic Field and Re-Melting on Degassing of Molten Aluminum Alloys
77. Altmetric Badge
    Chapter 76 SEM Study of Fatigue Crack Growth Behavior in Duplex Stainless Steels
78. Altmetric Badge
    Chapter 77 Statistical Modeling for Low Cycle Fatigue
79. Altmetric Badge
    Chapter 78 Fatigue Crack Initiation in Metallic Matrix
80. Altmetric Badge
    Chapter 79 Fatigue Damage in Carbon Fibre Epoxy Composite Under Variable Loading Conditions
81. Altmetric Badge
    Chapter 80 The Role of Ti on Reducing the Misfit of A Co-Al-W Alloy
82. Altmetric Badge
    Chapter 81 Surface Segregation and Phase Formation in Thin Films of SOFC Cathode Materials
83. Altmetric Badge
    Chapter 82 An Interrupted In-Situ Method for Electrochemical Formation of Mg-Ni Intermetallics
84. Altmetric Badge
    Chapter 83 Microstructural Effects on the Cyclic Response of FCC Metallic Alloys – a Dislocation Dynamics Study
85. Altmetric Badge
    Chapter 84 Microstucture Modeling to Ductility Prediction of Mg Alloys
86. Altmetric Badge
    Chapter 85 Characterisation of Mechanical Property Variation Across an Inertia Friction Weld of a CrMoV Steel
87. Altmetric Badge
    Chapter 86 Ultrasonic Backscattering Measurements of Grain Size in Metal Alloys
88. Altmetric Badge
    Chapter 87 Application of Acoustic Emission Technique for Online Monitoring of Friction Stir Welding Process During Welding of AA6061-T6 Aluminum Alloy
89. Altmetric Badge
    Chapter 88 Microstructural Evaluation of a Lean Duplex UNS S32304 — X-Ray Diffraction and Scanning Electron Microscopy Techniques Correlated with Eddy Current Testing
90. Altmetric Badge
    Chapter 89 Capillary Bias Fields and Interface Branching
91. Altmetric Badge
    Chapter 90 The Oxidation-Resistance Properties of Iron-Based Superalloys Between 1473 and 1523K
92. Altmetric Badge
    Chapter 91 Magnetocaloric refrigeration concepts: current state of the art
93. Altmetric Badge
    Chapter 92 Tailoring of Magnetic Properties and GMI Effect in Thin Amorphous Wires
94. Altmetric Badge
    Chapter 93 Magnetic Properties and Giant Magnetoimpedance Effect in Nanocrystalline Microwires
95. Altmetric Badge
    Chapter 94 Mechanism of Corrosion-Enhanced Erosion of Steels in Oil and Gas Production
96. Altmetric Badge
    Chapter 95 Effective Attacking Length Scale of Dislocation Nucleation from the Free Surface in Pure Crystals
97. Altmetric Badge
    Chapter 96 Atomistic Simulation on the Structure and Mechanical Response of Σ3, Σ5 Tilt Grain Boundaries Under Tension
98. Altmetric Badge
    Chapter 97 Sol-Gel Synthesis NaCrSi 2 O 6 Nanopigments Aided by Statistical Design of Experiments
99. Altmetric Badge
    Chapter 98 Synthesis of Ceramic Nanopigments
100. Altmetric Badge
     Chapter 99 Green Synthesis of Silver Nanoparticles Using Arbutus cf. bicolor Leaves Extract
101. Altmetric Badge
     Chapter 100 Challenges in Developing High Energy Density Li-Ion Batteries with High Voltage Cathodes
102. Altmetric Badge
     Chapter 101 The Role and Application of Quantum Capacitance in Nanostructured Energy Storage Devices
103. Altmetric Badge
     Chapter 102 How to use Nanostructured Materials Effectively in Rechargeable Lithium/Sulfur Battery
104. Altmetric Badge
     Chapter 103 Investigation of Li-Ion Capacitors’ Cycle Performance
105. Altmetric Badge
     Chapter 104 Facile Synthesis of α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanorods Derived from α-FeOOH Nanorods and Its Application as Anode Materials for Rechargeable Sodium-Ion Batteries
106. Altmetric Badge
     Chapter 105 Electrodeposited Si-Al Thin Film as Anode for Li Ion Batteries
107. Altmetric Badge
     Chapter 106 FeWO 4 : An Anode Material for Sodium-Ion Batteries
108. Altmetric Badge
     Chapter 107 A Detailed Study of the Transformation Stasis Phenomenon during the Isothermal Bainite Transformation in Mn Based Low Alloy Steels
109. Altmetric Badge
     Chapter 108 Microstructural Evolution of Ferrite Grains during Dynamic Transformation in 10Ni-0.1C Steel
110. Altmetric Badge
     Chapter 109 Hot Deformation Behavior of an Fe-Al Steel in the Two Phase Region
111. Altmetric Badge
     Chapter 110 Microalloyed High Carbon Wire Steels
112. Altmetric Badge
     Chapter 111 A Tem Study on the Ti-Alloyed Grey Iron
113. Altmetric Badge
     Chapter 112 Relationship Between Microstructural Evolution, Order-Disorder Transformation and Plastic Inhomogeneties during Deformation of Beta Brass
114. Altmetric Badge
     Chapter 113 Effect of Intercritical Annealing on Phase Transformation and Mechanical Properties of Thermo-Mechanically Processed Dual Matrix Ductile Iron
115. Altmetric Badge
     Chapter 114 In Situ Observation of Phase Transformation of Powder Sintering from Ni/TiH 2 Using Neutron Diffraction
116. Altmetric Badge
     Chapter 115 An insight into the mechanism of SFT formation near 1/2 ‹110› edge dislocations in aluminum exposed to irradiation
117. Altmetric Badge
     Chapter 116 Spray Cooling of Early Extracted Hot Stamped Parts
118. Altmetric Badge
     Chapter 117 Influence of Cryogenic Treatment on Microstructure Characteristics and Mechanical Properties of Aisi D2 Tool Steel
119. Altmetric Badge
     Chapter 118 Bulk Processing and Mechanical Properties of Ni 3 Mo
120. Altmetric Badge
     Chapter 119 Solid-liquid Phase Transitions of Fe Nanoparticles
121. Altmetric Badge
     Chapter 120 Evolution of the Structure Morphology of Fe-5 wt.%Mn Alloy During Directional Solidification
122. Altmetric Badge
     Chapter 121 Nucleation and Growth of Nucleus in Supercooled Liquid Fe: A Molecular Dynamics Study
123. Altmetric Badge
     Chapter 122 Phase Growth in Fe-Fe50wt%Si Diffusion Couple Under a Magnetic Field
124. Altmetric Badge
     Chapter 123 Microstructurally Explicit Study of Transport Phenomena in Uranium Oxide
125. Altmetric Badge
     Chapter 124 Interfacial Reaction and Phase Growth for Various Metal/Amorphous Silicon System
126. Altmetric Badge
     Chapter 125 Characterization of Various Dislocations Present at a near Σ 3[−110]/(−1–11) Grain Boundary of Aluminium by high Resolution Electron Microscopy
127. Altmetric Badge
     Chapter 126 Line Tension of Grain Boundary Triple Junctions in the Copper Tricrystals
128. Altmetric Badge
     Chapter 127 Investigation of Atomic-Scale Energetics on Liquid Metal Embrittlement of Aluminum due to Gallium
129. Altmetric Badge
     Chapter 128 AlMnCrCuFeNi Multicomponent Alloy with Superior Hardness and Corrosion Resistance
130. Altmetric Badge
     Chapter 129 Microstructural Characterization and Mechanical Properties of Laser Deposited High Entropy Alloys
131. Altmetric Badge
     Chapter 130 Structure and Properties of Refractory High-Entropy Alloys
132. Altmetric Badge
     Chapter 131 Consolidation of TiB<Subscript>2</Subscript> Ceramics by using Spark Plasma Sintering
133. Altmetric Badge
     Chapter 132 Corrosion Analysis of Zn-Sn Alloys
134. Altmetric Badge
     Chapter 133 Determination of the Optimum NiS Fire Assay Parameters FOR Platinum in Catalytic Converters
135. Altmetric Badge
     Chapter 134 Dynamic Mechanical Behavior and Phase-Based Constitutive Model of 20Cr12Ni4Mo3VNiN in Austenitizing Stage
136. Altmetric Badge
     Chapter 135 Numerical Simulation of Pulverized Coal Combustion Behavior in the Traditional Blast Furnace and Oxygen Blast Furnace
137. Altmetric Badge
     Chapter 136 Optical Properties Of Cd 1-x Zn x Se From Density Functional Theory
138. Altmetric Badge
     Chapter 137 Research of Weldability of Magnesium Alloy by Nd:YAG and Disc Laser
139. Altmetric Badge
     Chapter 138 Synergistic Effect on Extraction of Nickel and Cobalt from Synthetic Sulfate Solution using Dehpa and Cyanex 272 as Extractants
140. Altmetric Badge
     Chapter 139 Synthesis of Nanofiber Membrane by Electrospinning Technique
141. Altmetric Badge
     Chapter 140 Wear Resistance of the Ti/TiC Coatings Deposited by Means of Supersonic Cold Gas Spray Technique