↓ Skip to main content

Light Metals 2016

Overview of attention for book
Cover of 'Light Metals 2016'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 An Improved Lime Sinter Process to Produce Al2O3 from Low-Grade Al-Containing Resources
  3. Altmetric Badge
    Chapter 2 Investigation of Flotation Behaviors of Refractory High-Silica Bauxite
  4. Altmetric Badge
    Chapter 3 Study on effective extraction of Al and Fe from high-iron bauxite through “calcification-carbonization” method
  5. Altmetric Badge
    Chapter 3 Study on Effective Extraction of Al and Fe from High-iron Bauxite Through “Calcification-Carbonization” Method
  6. Altmetric Badge
    Chapter 4 Ways to Improve of Aluminum Content Raw Material Treatment by Sintering Method
  7. Altmetric Badge
    Chapter 5 Extraction of Aluminium by Autoclave Hydrochloric Acid Leaching of Boehmite-Kaolinite Bauxite
  8. Altmetric Badge
    Chapter 6 FT-IR, XPS and Density Functional Theory Study of Adsorption Mechanism of Sodium Formate onto Goethite or Hematite
  9. Altmetric Badge
    Chapter 7 Effect of Different Silica Mineral Compositions on the Digestion Results in Bayer Process
  10. Altmetric Badge
    Chapter 8 Effect of Lime Addition during Digestion on Stability of Digested Liquor of Diasporic Bauxite
  11. Altmetric Badge
    Chapter 9 Influence Factors of Stirring Speed of Self-Stirring Tubular Reactor Used in Bauxite Digestion Process
  12. Altmetric Badge
    Chapter 10 Leaching Kinetics for Recovering Alumina from Waste Tricalcium Aluminate Generated after Filtration of Bayer’s Liquor
  13. Altmetric Badge
    Chapter 11 Industrial Implementation Characteristics of Aluminates Liquor Low-Temperature Desilication Technology
  14. Altmetric Badge
    Chapter 12 Study on the Influence of Chemical Additives during the Digestion of Bauxite
  15. Altmetric Badge
    Chapter 12 Study on the Influence of Chemical Additives during the Digestion of Bauxite
  16. Altmetric Badge
    Chapter 13 Going Far (Floating Alumina Refinery)
  17. Altmetric Badge
    Chapter 13 Going far (Floating Alumina Refinery)
  18. Altmetric Badge
    Chapter 14 Sustaining Capital of Alumina Refinery Projects — Important but Unloved
  19. Altmetric Badge
    Chapter 15 Reaction behavior and conversion of anatase in alumina production process with calcification-carbonization method
  20. Altmetric Badge
    Chapter 15 Reaction Behavior and Conversion of Anatase in Alumina Production Process with Calcification-Carbonization Method
  21. Altmetric Badge
    Chapter 16 Alkalinity Precipitation Measurement on Carbonation of Bauxite Residue
  22. Altmetric Badge
    Chapter 16 Alkalinity Precipitation Measurement on Carbonation of Bauxite Residue
  23. Altmetric Badge
    Chapter 17 Extraction of alumina from the magnetic separation tailings derived from reductive roasting of bauxite residue
  24. Altmetric Badge
    Chapter 18 Research on activated alumina obtained by spray pyrolysis method
  25. Altmetric Badge
    Chapter 18 Research on Activated Alumina Obtained by Spray Pyrolysis Method
  26. Altmetric Badge
    Chapter 19 Characterization of Near Net-Shape Castable Rare Earth Modified Aluminum Alloys for High Temperature Application
  27. Altmetric Badge
    Chapter 20 On the Effect of Alloying Element Range on the Mechanical Properties of Recycled Aluminium Alloy EN AB-46000
  28. Altmetric Badge
    Chapter 21 Phase and Thermal Stability Analysis of Al-Fe-V-Si-Y Alloys After Solidification at Intermediate Cooling Rates
  29. Altmetric Badge
    Chapter 21 Phase and Thermal Stability Analysis of Al-Fe-V-Si-Y Alloys After Solidification at Intermediate Cooling Rates
  30. Altmetric Badge
    Chapter 22 Microstructure and Phase Evolution in A201 Alloys with Additions of Silicon
  31. Altmetric Badge
    Chapter 23 High Temperature Creep Evolution Ina -S Alloys Developed for Automotive Powertrain Applications A Neutron In-Situ Study on Hkl-Plane Creep Response
  32. Altmetric Badge
    Chapter 23 High Temperature Creep Evolution in Al-Si Alloys Developed for Automotive Powertrain Applications: A Neutron In-Situ Study on hkl-Plane Creep Response
  33. Altmetric Badge
    Chapter 24 Influencing Intergranular Corrosion Via Surface Treatment
  34. Altmetric Badge
    Chapter 24 Influencing Intergranular Corrosion via Surface Treatment
  35. Altmetric Badge
    Chapter 25 Mechanical Characterization and Corrosion Testing of X608 Al Alloy
  36. Altmetric Badge
    Chapter 25 Mechanical Characterization and Corrosion Testing Of X608 Al Alloy
  37. Altmetric Badge
    Chapter 26 Simultaneous Improvement of Mechanical and Corrosion Properties of Aluminum Alloys
  38. Altmetric Badge
    Chapter 27 New Methodology to Determine Stable Texture Components under Cold Rolling in FCC Metals
  39. Altmetric Badge
    Chapter 27 New Methodology to Determine Stable Texture Components Under Cold Rolling in FCC Metals
  40. Altmetric Badge
    Chapter 28 Recrystallization in Al-Mg Alloys after Hot Compression
  41. Altmetric Badge
    Chapter 28 Recrystallization in Al-Mg Alloys after Hot Compression
  42. Altmetric Badge
    Chapter 29 Large Strain Cyclic Simple Shear Behavior of Aluminum Extrusions: An Experimental and Numerical Study
  43. Altmetric Badge
    Chapter 29 Large Strain Cyclic Simple Shear Behavior of Aluminum Extrusions: An xperimental and Numerical Study
  44. Altmetric Badge
    Chapter 30 Quasi and Dynamic Compression of ECAP Processed AA 6082
  45. Altmetric Badge
    Chapter 31 Study on Hot Sizing and Creep-Ageing Behavior of Al-Cu-Mn Cast Alloy
  46. Altmetric Badge
    Chapter 32 Grain Refinement Mechanism of Aluminum by Al-Ti-B Master Alloys
  47. Altmetric Badge
    Chapter 33 The Microstructures and Mechanical Properties of Al-5Mg-1.4Mn Alloy Cast under Near-Rapid Cooling
  48. Altmetric Badge
    Chapter 34 Effect of the Shape of Solid Particles on the Distribution of Particles in JIS AC4CH (A356) Aluminum Alloy Semi-Solid High-Pressure Die Casting
  49. Altmetric Badge
    Chapter 35 A High Strength Aluminium Alloy for High Pressure Die Casting
  50. Altmetric Badge
    Chapter 36 Precipitation of Al3Zr Dispersoids during Homogenization of Al-Zn-Cu-Mg-Zr Alloys
  51. Altmetric Badge
    Chapter 37 Application of Secondary Shear Effects in the Extrusion Machining Process to Explore Recrystallization Mechanics during Conventional Extrusion of 7050 Aluminum
  52. Altmetric Badge
    Chapter 38 Large Strain Extrusion Machining on 6013 Aluminum Alloy
  53. Altmetric Badge
    Chapter 39 Effect of Extrusion Ratio on Mechanical Properties of Al-20Si Produced by Spray Deposition and Continuous Extrusion Technique
  54. Altmetric Badge
    Chapter 40 The Influence of Low Temperature Clustering on Strengthening Precipitation in Al-Mg-Si Alloys
  55. Altmetric Badge
    Chapter 41 Synthesis of Al-TiC Nanocomposites by an In-Situ Gas-Liquid Method
  56. Altmetric Badge
    Chapter 42 Orientation Relationships of Precipitates with the Matrix in an Aluminum Quasicrystalline Alloy
  57. Altmetric Badge
    Chapter 43 Important considerations for laser marking an identifier on aluminum
  58. Altmetric Badge
    Chapter 44 Corrosion Resistance of Different Aluminum Alloys in Ethanol
  59. Altmetric Badge
    Chapter 45 Refinement of Primary Silicon Crystals by Novel Al-ZnS Master Alloy in Solidification of Hypereutectic Al-Si Alloys
  60. Altmetric Badge
    Chapter 46 Effects of Alloying Elements on Microstructure, Mechanical Properties and Formability of Al-Si-Fe-Cu-Mn Based Alloys for Micro-Channel Tube of Heat Exchanger
  61. Altmetric Badge
    Chapter 47 Conception of “Dream Cell” in Aluminium Electrolysis
  62. Altmetric Badge
    Chapter 48 The Impact of the Cavity on the Top Heat Losses in Aluminum Electrolysis Cells
  63. Altmetric Badge
    Chapter 49 Rio Tinto AP44 Cell Technology Development at Alma Smelter
  64. Altmetric Badge
    Chapter 50 Hydro’s Cell Technology Path towards Specific Energy Consumption below 12 kWh/kg
  65. Altmetric Badge
    Chapter 51 The Successful Implementation of DUBAL DX+ Technology at EMAL
  66. Altmetric Badge
    Chapter 52 Alumina Dissolution Modeling in Aluminium Electrolysis Cell Considering MHD Driven Convection and Thermal Impact
  67. Altmetric Badge
    Chapter 53 Numerical Investigation on the Impact of Anode Change on Heat Transfer and Fluid Flow in Aluminum Smelting Cells
  68. Altmetric Badge
    Chapter 54 On the Importance of Field Validation in the Use of Cell Thermal Balance Modeling Tools
  69. Altmetric Badge
    Chapter 55 Sideledge Facing Metal in Aluminium Electrolysis Cells: Freezing and Melting in the Presence of a Bath Film
  70. Altmetric Badge
    Chapter 56 Modelling of Metal Flow and Metal Pad Heaving in a Realistic Reference Aluminum Reduction Cell
  71. Altmetric Badge
    Chapter 57 Characterization of Bubble Behavior in Aluminum Reduction Cells
  72. Altmetric Badge
    Chapter 58 Elimination of Lithium from Aluminium Electrolyte by Acid Leaching Method
  73. Altmetric Badge
    Chapter 59 Impact of the Heat Flux on Solidification of Cryolite Based Bath
  74. Altmetric Badge
    Chapter 60 Investigation of Sodium Sulfate Additions into Cryolite-Alumina Melts
  75. Altmetric Badge
    Chapter 61 Polyvalent Impurities and Current Efficiency in Aluminium Cells: A Model Concerning Electrochemical Short Circuiting
  76. Altmetric Badge
    Chapter 62 Sodium in Aluminum Metal of Operating Prebake Cells: Confirmation and New Findings
  77. Altmetric Badge
    Chapter 63 The Performance of Aluminium Electrolysis in a Low Temperature Electrolyte System
  78. Altmetric Badge
    Chapter 64 The Role of Key Impurity Elements on the Performance of Aluminium Electrolysis — Current Efficiency and Metal Quality
  79. Altmetric Badge
    Chapter 65 Alcoa STARprobe™ — Update in Further Development for Measuring Cryolite Properties
  80. Altmetric Badge
    Chapter 66 Analysis and Visualization of Aluminum Reduction Cell Noise Based on Wavelet Transform
  81. Altmetric Badge
    Chapter 67 Study on Effect of Al-O-C Compound in Alumina Carbothermal Reduction
  82. Altmetric Badge
    Chapter 68 The Impact of Alumina Quality on Current Efficiency and Energy Efficiency in Aluminum Reduction
  83. Altmetric Badge
    Chapter 68 The Impact of Alumina Quality on Current Efficiency and Energy Efficiency in Aluminum Reduction
  84. Altmetric Badge
    Chapter 69 Sideledge Facing Metal in Aluminium Electrolysis Cells: Preliminary Modelling Study of Bath Film Formation
  85. Altmetric Badge
    Chapter 70 Pilot Test of Aluminum Electrolysis by the NiFe2O4-M Inert Anodes
  86. Altmetric Badge
    Chapter 71 Thermodynamic Analysis and Dynamic Simulation on Carbothermic Chlorination Reaction of Al2O under Vacuum
  87. Altmetric Badge
    Chapter 72 Design, Start-Up and Performance of Four Gas Treatment Centers for Ma’aden Aluminium
  88. Altmetric Badge
    Chapter 73 Management and Performance of the Largest Gas Treatment Centre at EMAL Potline during Major Shutdown of Main Exhaust Fans
  89. Altmetric Badge
    Chapter 74 Compact GTC Design: Reducing Footprint and Overall Steel Weight
  90. Altmetric Badge
    Chapter 75 Technology for Removal of Sulphur Compounds from Gases Generated during Aluminum Production
  91. Altmetric Badge
    Chapter 76 Sustainable Practices in Spent Potliner — An Industrial Ecology Approach
  92. Altmetric Badge
    Chapter 77 The LCL&L Process: A Sustainable Solution for the Treatment and Recycling of Spent Potlining
  93. Altmetric Badge
    Chapter 78 Development, Proof of Concept and Industrial Pilot of the New CHAC Scrubbing Technology: An Innovative and Efficient Way to Scrub Sulfur Dioxide
  94. Altmetric Badge
    Chapter 79 Aluminerie de Bécancour Conditioning Tower Replacement
  95. Altmetric Badge
    Chapter 80 Alumina Handling in the Smelter — From Port to Pot
  96. Altmetric Badge
    Chapter 81 Recent Developments in Hyper-Dense Phase Alumina Handling Systems
  97. Altmetric Badge
    Chapter 81 Recent Developments in Hyper-Dense Phase Alumina Handling Systems
  98. Altmetric Badge
    Chapter 82 The Challenge to Supply Consistent Alumina Quality to All Pots on Increasingly Longer and Higher Capacity Potlines
  99. Altmetric Badge
    Chapter 83 Design and Demonstration of an Improved Automated Pot Tapping Method and Equipment
  100. Altmetric Badge
    Chapter 84 Evolution of Crust Breaker Control for DX+ and DX+ Ultra Technologies
  101. Altmetric Badge
    Chapter 85 SiC in Electrolysis Pots: An Update
  102. Altmetric Badge
    Chapter 86 Assessing the Role of Smelter Grade Alumina Porosity in the HF Scrubbing Mechanism
  103. Altmetric Badge
    Chapter 87 The Competitive Adsorption of HF and SO2 on Smelter Grade Alumina
  104. Altmetric Badge
    Chapter 88 Evaluation of Gas Composition from Laboratory Scale Electrolysis Experiments with Anodes of Different Sulphur Content
  105. Altmetric Badge
    Chapter 89 Sustainable Reduction of Anode Effect and Low Voltage PFC Emissions
  106. Altmetric Badge
    Chapter 90 QCL-Based Perfluorocarbon Emission Monitoring
  107. Altmetric Badge
    Chapter 91 Using Artificial Neural Network to Predict Low Voltage Anode Effect PFCS at the Duct End of an Electrolysis Cell
  108. Altmetric Badge
    Chapter 92 Anode Effect Initiation During Aluminium Electrolysis in A Two Compartment Laboratory Cell
  109. Altmetric Badge
    Chapter 92 Anode Effect Initiation during Aluminium Electrolysis in a Two-Compartment Laboratory Cell
  110. Altmetric Badge
    Chapter 93 Enhancing Production Performance by Optimization All Resources at PT Inalum (Persero)
  111. Altmetric Badge
    Chapter 94 New Assisted Gauging System: Another Step to Reduce Variation on Low ACD Operation
  112. Altmetric Badge
    Chapter 95 A Novel Method for Processing Sodium Reduction Skimming Station Residue
  113. Altmetric Badge
    Chapter 96 The ‘Virtual Battery’ — Operating an Aluminium Smelter with Flexible Energy Input
  114. Altmetric Badge
    Chapter 96 The 'Virtual Battery' - Operating an Aluminium Smelter with Flexible Energy Input
  115. Altmetric Badge
    Chapter 97 Understanding the Basic Requirements of the Anode Set Modifier
  116. Altmetric Badge
    Chapter 98 Reduction Operating Experience on Power Shading at Maaden
  117. Altmetric Badge
    Chapter 99 Effect of Carbon Dust on the Electrical Resistivity of Cryolite Bath
  118. Altmetric Badge
    Chapter 100 Detection of Local Cell Conditions Based on Individual Anode Current Measurements
  119. Altmetric Badge
    Chapter 100 Detection of Local Cell Conditions Based On Individual Anodecurrent Measurements
  120. Altmetric Badge
    Chapter 101 Dynamic Response of Cryolitic Bath and Influence on Cell Heat and Mass Balance with Large Scale Potline Power Shifts
  121. Altmetric Badge
    Chapter 102 Simulations on the Bath Chemistry Variables Using Neural Networks
  122. Altmetric Badge
    Chapter 103 Technology Research on Decreasing the Aluminum Surface Waves and Reducing the Cathode Voltage Drop in Aluminum Electrolysis Cell
  123. Altmetric Badge
    Chapter 104 Hall-Heroult Cell Simulator: A Tool for the Operation and Process Control
  124. Altmetric Badge
    Chapter 105 Studies on Anode Pre-Heating Using Individual Anode Signals in Hall-Héroult Reduction Cells
  125. Altmetric Badge
    Chapter 105 Studies on Anode Pre-Heating Using Individual Anode Signals in HallhéRoult Reduction Cells
  126. Altmetric Badge
    Chapter 106 35 Years of Contributions to Cast Shop Research and Development — Honoring Prof. Dr. Wolfgang Schneider
  127. Altmetric Badge
    Chapter 107 Effect of Liquid Metal Distribution on the Flow Field and Macrosegregation during Direct Chill Casting of Aluminum Alloy 7050
  128. Altmetric Badge
    Chapter 108 Aluminum Billets D.C. Casting: Level-Pour vs. Fall-Pour: A Techno-Historical Approach
  129. Altmetric Badge
    Chapter 109 Hot Tearing in DC Casting Ingot of 7XXX Aluminum Alloys
  130. Altmetric Badge
    Chapter 110 Initial Development of Micro-Shrinkage Crack during Early Stages of Direct Chill Casting of Al-4.5% Cu Alloy
  131. Altmetric Badge
    Chapter 111 Successful Implementation of a New Rolling Slab Casting Technology, AFM, within Hydro
  132. Altmetric Badge
    Chapter 112 Uncertainty Propagation in Numerical Modeling of Direct Chill Casting
  133. Altmetric Badge
    Chapter 113 The Study Conditions Occurrence of Hot Tearing in the Billets Alloy EN AW6060 Produced with the Process of Direct Chill Casting
  134. Altmetric Badge
    Chapter 114 Weibull Analysis for the Repeatibility of Die Castings Made by an Al-Mg-Si-Mn Alloy
  135. Altmetric Badge
    Chapter 115 Thermo-Mechanical Properties of Wrought Aluminium Alloys Produced from Scrap Mixing
  136. Altmetric Badge
    Chapter 116 History and Development of Slag and Dross Pressing
  137. Altmetric Badge
    Chapter 117 Testing PPE for Molten Aluminum Splash Resistance
  138. Altmetric Badge
    Chapter 118 Grain refinement of self-hardening aluminum alloys
  139. Altmetric Badge
    Chapter 119 Modification of Eutectic Si and Refinement of Eutectic Grain in Al-Si-Mg Alloys by CrB2 and Sr Addition
  140. Altmetric Badge
    Chapter 120 Modification of Macrosegregation Patterns in Rolling Slab Ingots by Bulk Grain Migration
  141. Altmetric Badge
    Chapter 121 Effect of High Intensity Ultrasonic Treatment on the Microstructure, Corrosion and Mechanical Behaviour of AC7A Aluminum Alloy
  142. Altmetric Badge
    Chapter 122 Mechanism of Zirconium Poisoning Effect on TiB2 Inoculation in Aluminium Alloys
  143. Altmetric Badge
    Chapter 123 Study of Manganese Dissolution in Aluminum Melts
  144. Altmetric Badge
    Chapter 123 Study of Manganese Dissolution in Aluminum Melts
  145. Altmetric Badge
    Chapter 124 Ultrasonic Grain Refining of Continuous Cast Aluminum: Microstructure and Properties
  146. Altmetric Badge
    Chapter 125 Aluminium Casting Furnace Energy Efficiency: Recent Improvements in Rio Tinto Aluminium Casthouses
  147. Altmetric Badge
    Chapter 126 Case Study on Round-Top Fire Rates
  148. Altmetric Badge
    Chapter 126 Case Study on Round-Top Fire Rates
  149. Altmetric Badge
    Chapter 127 Increasing Holding Furnace Capacity from 30 to be 40 Tons Molten Aluminium through Modification of Lining Design
  150. Altmetric Badge
    Chapter 127 Increasing Holding Furnace Capacity from 30 to Be 40 Tons Molten Aluminium through Modification of Lining Design
  151. Altmetric Badge
    Chapter 128 Furnace Modeling For Efficient Combustion Gas Circulation
  152. Altmetric Badge
    Chapter 128 Furnace Modeling for Efficient Combustion Gas Circulation
  153. Altmetric Badge
    Chapter 129 Furnace Pressure Control Technology for Fuel Efficiency
  154. Altmetric Badge
    Chapter 129 Furnace Pressure Control Technology for Fuel Efficiency
  155. Altmetric Badge
    Chapter 130 Calculated Aluminum Oxidation Rates during Rotary Furnace Melting through Flue Gas Analysis — Part Two
  156. Altmetric Badge
    Chapter 131 On the Cast House Exergy Management
  157. Altmetric Badge
    Chapter 132 Design of Square Induction Coils for the Electromagnetic Priming of Ceramic Foam Filters
  158. Altmetric Badge
    Chapter 132 Design of Square Induction Coils for the Electromagnetic Priming of Ceramic Foam Filters
  159. Altmetric Badge
    Chapter 133 Assessment of Active Filters for High Quality Aluminium Cast Products
  160. Altmetric Badge
    Chapter 133 Assessment of Active Filters for High Quality Aluminium Cast Products
  161. Altmetric Badge
    Chapter 134 Numerical Simulation of Degassing Phenomena in Direct Chilled Casting Process under External Static Magnetic Field on Flow Pattern in Slab Mold
  162. Altmetric Badge
    Chapter 135 The Problem of Cavities in Open Mold Conveyor Remelt Ingots
  163. Altmetric Badge
    Chapter 135 The Problem of Cavities in Open Mold Conveyor Remelt Ingots
  164. Altmetric Badge
    Chapter 136 Theory and Practical Application of Ultrasonic Degassing at J. W. Aluminum
  165. Altmetric Badge
    Chapter 137 TiB2 Particle Detection in Liquid Aluminum via Laser Induced Breakdown Spectroscopy
  166. Altmetric Badge
    Chapter 138 Inline melt treatment for low to medium metal flow rates
  167. Altmetric Badge
    Chapter 139 Effect of Soaking Treatment on the Microstructure and Wear Behavior of the Ultrasonic Melt-Treated B390 Hypereutectic Al-Si Alloy
  168. Altmetric Badge
    Chapter 140 Influence of Oxidation on Contact Angle between Liquid Aluminum and Al2O3
  169. Altmetric Badge
    Chapter 141 Optimization of the Ultrasonic Processing in a Melt Flow
  170. Altmetric Badge
    Chapter 142 A Comparison of Cold and Hot PoDFA Procedure for Particle Monitoring in Liquid Aluminium
  171. Altmetric Badge
    Chapter 143 Assessment of Settling Behavior of Particles with Different Shape Factors by LiMCA Data Analysis
  172. Altmetric Badge
    Chapter 144 Modeling of Inclusion Behavior in an Aluminum Induction Furnace
  173. Altmetric Badge
    Chapter 145 Characterization of Carbon Anode Materials by Image Analysis
  174. Altmetric Badge
    Chapter 146 Electrochemical Reactivity and Wetting Properties of Anodes Made from Anisotropic and Isotropic Cokes
  175. Altmetric Badge
    Chapter 147 Study of the Wetting of Coke by Different Pitches
  176. Altmetric Badge
    Chapter 148 Quantification of Sodium Present in Dry Aggregates and Anodes
  177. Altmetric Badge
    Chapter 149 Interfacial Boundary between Carbon Anodes and Molten Salt Electrolyte
  178. Altmetric Badge
    Chapter 149 Interfacial Boundary between Carbon Anodes and Molten Salt Electrolyte
  179. Altmetric Badge
    Chapter 150 Measurement of the Electric Current Distribution in an Anode
  180. Altmetric Badge
    Chapter 151 Cathode Wear in Electrowinning of Aluminum Investigated by a Laboratory Test Cell
  181. Altmetric Badge
    Chapter 151 Cathode Wear in Electrowinning of Aluminum Investigated by a Laboratory Test Cell
  182. Altmetric Badge
    Chapter 152 Copper Bars for the Hall-Héroult Process
  183. Altmetric Badge
    Chapter 152 Copper Bars For The Hall-HÉRoult Process
  184. Altmetric Badge
    Chapter 153 Modeling Gravity Wave in 3D with Openfoam in an Aluminum Reduction Cell with Regular and Irregular Cathode Surfaces
  185. Altmetric Badge
    Chapter 153 Modeling Gravity Wave in 3D with Openfoam in an Aluminum Reduction Cell with Regular and Irregular Cathode Surfaces
  186. Altmetric Badge
    Chapter 154 Porous Carbon Anodes for the Supply of Methane during Electrowinning of Aluminium
  187. Altmetric Badge
    Chapter 155 Creep Behavior and Change of Porous Structure of Graphite Cathode Material in NaF-AlF3-Al2O3 Melt under External Pressure
  188. Altmetric Badge
    Chapter 155 Creep Behavior and Change of Porous Structure of Graphite Cathode Material in NaF-AlF3-Al2O3Melt under External Pressure
  189. Altmetric Badge
    Chapter 156 Uneven Cathode Wear in Aluminium Reduction Cells
  190. Altmetric Badge
    Chapter 156 Uneven Cathode Wear in Aluminium Reduction Cells
  191. Altmetric Badge
    Chapter 157 Effect of Cathode Collector Copper Inserts on the Hall-Héroult Cell MHD Stability
  192. Altmetric Badge
    Chapter 158 Anode Baking Furnace Fluewall Design Evolution: A Return of Experience of Latest Baffleless Technology Implementation
  193. Altmetric Badge
    Chapter 158 Anode Baking Furnace Fluewall Design Evolution: A Return of Experience of Latest Baffleless Technology Implementation
  194. Altmetric Badge
    Chapter 159 Effect of Heating Rate During Baking on the Properties of Carbon Anodes Used in Aluminum Industry
  195. Altmetric Badge
    Chapter 160 Empirical Modeling of the Baking Furnace to Predict Baked Anode Properties
  196. Altmetric Badge
    Chapter 161 In Situ Investigation of the Behavior of Anode Assemblies
  197. Altmetric Badge
    Chapter 162 Low Resistance Anode Assembly Using Steel Stubhole Conductors Across the Cast Iron to Carbon Interface
  198. Altmetric Badge
    Chapter 163 Upgrade of the Firing and Control System at Egyptalum for Dual Fuel Firing
  199. Altmetric Badge
    Chapter 164 Mirea: an On-Line Quality Control Equipment Integration in an Operational Context
  200. Altmetric Badge
    Chapter 165 Journey Towards World-Class Operational Effectiveness at DUBAL (EGA Jebel Ali) Paste Plant
  201. Altmetric Badge
    Chapter 166 The Startup and the Operation Performance of the Twin Green Anode Plant at Maaden Aluminium Smelter in Saudi Arabia
  202. Altmetric Badge
    Chapter 166 The Startup and The Operation Performance of The Twin Green Anode Plant at Maaden Aluminiumsmelter in Saudi Arabia
  203. Altmetric Badge
    Chapter 167 Simulation-Based Decision Support in Cathode Re-Lining Facility Design
  204. Altmetric Badge
    Chapter 168 Twin-Roll Casting of Carbon Fiber-Reinforced and Glass Fiber-Reinforced Aluminum Strips
  205. Altmetric Badge
    Chapter 169 Productivity Improvements in Industrial Twin-Roll Casting by Heat Loss Analysis Along the Process Chain
  206. Altmetric Badge
    Chapter 170 Development and Numerical Simulation of a Compound Belt Casting Process
  207. Altmetric Badge
    Chapter 171 Crystallographic Texture Development of As-Cast 3105 Alloy Produced by St/Cu Shell Pair
  208. Altmetric Badge
    Chapter 171 Crystallographic Texture Development of As-Cast 3105 Alloy Produced by St/Cu Shell Pair
  209. Altmetric Badge
    Chapter 172 Annealing Curve of 3105 Alloy Produced by Twin Roll and Belt Casting Method
  210. Altmetric Badge
    Chapter 172 Annealing Curve of 3105 Alloy Produced by Twin Roll and Belt Casting Method
  211. Altmetric Badge
    Chapter 173 Effect of As-Cast Strip Thickness and Reduction Prior to Soft Annealing on the Formability of Twin-Roll Cast 5754 Sheets
Attention for Chapter 50: Hydro’s Cell Technology Path towards Specific Energy Consumption below 12 kWh/kg
Altmetric Badge

Mentioned by

blogs
1 blog

Citations

dimensions_citation
2 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
Hydro’s Cell Technology Path towards Specific Energy Consumption below 12 kWh/kg
Chapter number 50
Book title
Light Metals 2016
Published by
Springer, Cham, January 2016
DOI 10.1007/978-3-319-48251-4_50
Book ISBNs
978-3-31-948615-4, 978-3-31-948251-4
Authors

Martin Segatz, Jorund Hop, Pierre Reny, Håvard Gikling, Segatz, Martin, Hop, Jorund, Reny, Pierre, Gikling, Håvard