↓ Skip to main content

High Tech Concrete: Where Technology and Engineering Meet

Overview of attention for book
Cover of 'High Tech Concrete: Where Technology and Engineering Meet'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 2 Transfer of Innovative Research Results into the German Cement Industry
  3. Altmetric Badge
    Chapter 3 From Laboratory into Practice - German Approach for Accelerating the Transfer of Innovative Materials in Civil Engineering
  4. Altmetric Badge
    Chapter 4 Kinetics of Drying Shrinkage and Creep: An Experimentally Based Code-Type Approach
  5. Altmetric Badge
    Chapter 5 An Experimental Study of Autogenous and Drying Shrinkage
  6. Altmetric Badge
    Chapter 6 Comparative Study on the Drying Shrinkage and Mechanical Properties of Geopolymer Foam Concrete Incorporating Different Dosages of Fiber, Sand and Foam Agents
  7. Altmetric Badge
    Chapter 7 Finite Element Implementation of a Drying Shrinkage Model Based on Pore Evaporation Mechanics
  8. Altmetric Badge
    Chapter 8 Numerical Analysis of Long Term Effects on Eigenstresses and Micro-cracking in Concrete
  9. Altmetric Badge
    Chapter 9 Mechanical Properties of Concrete with Blast Furnace Slag Fine Aggregates Subjected to Freeze-Thaw Cycles
  10. Altmetric Badge
    Chapter 10 Chloride Ingress of Carbonated Blast Furnace Slag Cement Mortars
  11. Altmetric Badge
    Chapter 11 Detecting the Presence of Chloride in Hardened Mortar Using Microwave Non-Destructive Testing
  12. Altmetric Badge
    Chapter 12 Effect of Curing Regime and Controlled Permeability Formwork on Early Chloride Penetration into Fly Ash Concrete
  13. Altmetric Badge
    Chapter 13 Effect of the Cement Composition on the Temperature and Strength Rising at Early Age
  14. Altmetric Badge
    Chapter 14 Concrete with Flash-Calcined Dredging Sediments as a Novel Supplementary Cementitious Material
  15. Altmetric Badge
    Chapter 15 High Performance Aerogel Concrete
  16. Altmetric Badge
    Chapter 17 Cellular Sprayed Concrete: A Very-Simple and Economic Method for Remixing an OPC into HPC at a Field
  17. Altmetric Badge
    Chapter 18 Specification Guidelines for Surface Preparation of Concrete Prior to Repair
  18. Altmetric Badge
    Chapter 19 Bond Strength of Steel FRC Repairs to Concrete Substrate: Investigation on Adhesion Strength, Friction, and Bond Enhancing Mechanisms
  19. Altmetric Badge
    Chapter 20 Numerical Investigation of Strengthened Unreinforced Masonry (URM) Structures with Ultra High Performance Fibre Reinforced (UHPFRC) Layers
  20. Altmetric Badge
    Chapter 21 Effects of Silane Treatment of Steel Fibres on Mechanical Properties and Durability of SFRC
  21. Altmetric Badge
    Chapter 22 The Effect of Fibre Orientation on the Uniaxial Tensile Response of UHPFRC: Experimental Evaluation and Analytical Modelling
  22. Altmetric Badge
    Chapter 23 Size Effect on Post-cracking Strength of High Performance Fibre-Reinforced Concrete
  23. Altmetric Badge
    Chapter 24 Influence of the Anchor Fan Position on the Performance of FRP Anchors
  24. Altmetric Badge
    Chapter 25 Engineering Properties and Durability of Mortars Containing New Nano Rice Husk Ash (RHA)
  25. Altmetric Badge
    Chapter 26 Effect of Rice Husk Ash Properties on the Early Age and Long Term Strength of Mortar
  26. Altmetric Badge
    Chapter 27 Rheological Behavior at Fresh State of Structural Recycled Aggregate Concrete
  27. Altmetric Badge
    Chapter 28 Recycling of End of Life Concrete Fines (0–4 mm) from Waste to Valuable Resources
  28. Altmetric Badge
    Chapter 29 Behaviour of FRP-Confined Rubberised Concrete with Internal Recycled Tyre Steel Fibres
  29. Altmetric Badge
    Chapter 30 Investigation of New Repair Countermeasure Methods Using Crack Self-healing Technologies for Water Leakage Prevention on Subway Tunnels
  30. Altmetric Badge
    Chapter 32 Impact of Different Conditions on Resin Coated Mortar
  31. Altmetric Badge
    Chapter 33 Micromechanics-Based Prediction of the Elastic Properties of Polymer-Modified Cementitious Materials
  32. Altmetric Badge
    Chapter 34 Structural Restoration of Fractured Concrete Specimens Using Pressured Crack Injection Technology and Micro-silica Epoxy Resin Compounds
  33. Altmetric Badge
    Chapter 35 Recent Development of Epoxy Coated and Filled Prestressing Strand and Behavior upon a Wire Break
  34. Altmetric Badge
    Chapter 37 Optimising 3D Printed Concrete Structures Using Topology Optimisation
  35. Altmetric Badge
    Chapter 38 Towards Standardization: Testing and Design of Carbon Concrete Composites
  36. Altmetric Badge
    Chapter 39 Load Bearing Capacity of PC Girders with and Without Fly Ash Affected by ASR Deteriorations
  37. Altmetric Badge
    Chapter 41 Free and Restrained Shrinkage of Hybrid Steel Fibres Reinforced Concrete
  38. Altmetric Badge
    Chapter 42 Hybrid Concrete Elements with Splitting Fiber Reinforcement Under Two-Dimensional Partial-Area Loading
  39. Altmetric Badge
    Chapter 43 Numerical Simulation of Steel Fibre Reinforced Concrete Girders Subjected to Cyclic Loads
  40. Altmetric Badge
    Chapter 44 A Numerical Model for the Creep of Fiber Reinforced Concrete
  41. Altmetric Badge
    Chapter 45 Engineering Model for SFRC Shear Strength Based on MC2010 MCFT Approach
  42. Altmetric Badge
    Chapter 46 New Test for the Characterization of the Tensile Constitutive Behaviour of FRC
  43. Altmetric Badge
    Chapter 48 Tension Stiffening Behavior of Self Compacting High Strength Fiber Reinforced Concrete Incorporating River Gravels
  44. Altmetric Badge
    Chapter 49 Assessment of the Shear Strength of Steel Fibre-Reinforced Concrete
  45. Altmetric Badge
    Chapter 50 Identification of FRCM Mechanical Parameters for the Retrofitting Design of Existing Structures
  46. Altmetric Badge
    Chapter 51 On the Design Response of a FRC Statically Undetermined Structure
  47. Altmetric Badge
    Chapter 53 Bending Capacity of Thin UHPC Plates Based on Theoretical Predictions and In-situ Testing
  48. Altmetric Badge
    Chapter 54 Shear Strength of UHPFRC Beams Without Stirrups: Fracture Mechanics Approach
  49. Altmetric Badge
    Chapter 59 Effect of Specimen Size and Initial Crack Location on Flexural Shear Behavior of UHPFRC
  50. Altmetric Badge
    Chapter 61 Shear Behavior of Reinforced Recycled Aggregate Concrete Beams
  51. Altmetric Badge
    Chapter 63 Shrinkage and Expansion Strains in Self-compacting Concrete: Comparison of Methods of Measurements
  52. Altmetric Badge
    Chapter 64 Sub-macroscopic Model of Confined Concrete According to Limit Analysis – Part 1: Principal Concrete Failure Mechanisms
  53. Altmetric Badge
    Chapter 65 Sub-macroscopic Model of Confined Concrete According to Limit Analysis - Part 2: Estimation of Strength of Actively Confined Concrete Structures
  54. Altmetric Badge
    Chapter 67 Investigation of Reinforcement Anchorages with Large Diameter Bars
  55. Altmetric Badge
    Chapter 68 Concrete Columns with High Reinforcement Ratios
  56. Altmetric Badge
    Chapter 69 Efficient End-Zone Detailing of Pre-tensioned Concrete Elements
  57. Altmetric Badge
    Chapter 70 Stress-Strain Model for Concrete Under Compressive Stress that Has Undergone Freeze-Thaw Deterioration
  58. Altmetric Badge
    Chapter 71 Bond Behaviour of Structural Lightweight Concrete
  59. Altmetric Badge
    Chapter 73 2D Modeling Temperature Development of Mass Concrete Structures at Early Age
  60. Altmetric Badge
    Chapter 74 Deformation Patterns and Behavior of Reinforced Concrete Walls with Low Aspect Ratios
  61. Altmetric Badge
    Chapter 75 Self Restrained Cracking of Reinforced Concrete Elements
  62. Altmetric Badge
    Chapter 76 Extended Strip Model for Slabs Subjected to a Combination of Loads
  63. Altmetric Badge
    Chapter 77 Shear Failure Tests on Large Specimens RC/SFRC, Including Statistical Repetition
  64. Altmetric Badge
    Chapter 78 Experimental Investigations on the Shear Capacity of Prestressed Concrete Continuous Beams with Rectangular and I-Shaped Cross-Sections
  65. Altmetric Badge
    Chapter 79 Effect of Post Shear Reinforcing Methods with Plate and Head Anchored Shear Reinforcing Bars
  66. Altmetric Badge
    Chapter 80 Shear Capacity of Concrete Slabs Without Shear Reinforcement Under Concentrated Loads Close to Support
  67. Altmetric Badge
    Chapter 81 Paradigms of Shear in Structural Concrete - Review and Experimental Verification
  68. Altmetric Badge
    Chapter 83 Shear Capacity – Crossing Borders
  69. Altmetric Badge
    Chapter 84 Shear Bearing Behaviour of Slender Reinforced Concrete Members Without Shear Reinforcement Containing a Low Ratio of Longitudinal Reinforcement
  70. Altmetric Badge
    Chapter 85 Influence of Support Conditions on Shear in RC Members Without Shear Reinforcement
  71. Altmetric Badge
    Chapter 86 A New Shear Model for Fibre-Reinforced Concrete Members Without Shear Reinforcement
  72. Altmetric Badge
    Chapter 87 Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals
  73. Altmetric Badge
    Chapter 91 Assessment of the Existing Formulations to Evaluate Shear-Punching Strength in RC Slabs with FRP Bars Without Transverse Reinforcement
  74. Altmetric Badge
    Chapter 92 Suitability of Shear Tension Code Requirements for the Assessment of Existing Structures Build-Up with Prestressed I- and T-Shape Girders
  75. Altmetric Badge
    Chapter 93 An Experimental Study on the Transition of Failure Between Flexural and Shear for RC Beams
  76. Altmetric Badge
    Chapter 94 On the Potential of Lattice Type Model for Predicting Shear Capacity of Reinforced Concrete and SHCC Structures
  77. Altmetric Badge
    Chapter 95 Nonlinear Finite Element Analysis of Reinforced Concrete Flat Slabs Subjected to Reversed-Cyclic Loading
  78. Altmetric Badge
    Chapter 97 Punching Analyses of Symmetrically Reduced Concrete Slab Quarters
  79. Altmetric Badge
    Chapter 98 On the Distribution of Shear Forces in Non-axisymmetric Slab-Column Connections
  80. Altmetric Badge
    Chapter 99 Efficiency of Grooving Method Used for Deficient RC Beam-Column Joints Seismically Rehabilitated with CFRP Sheets
  81. Altmetric Badge
    Chapter 100 Shear Capacity Assessment of Posttensioned Concrete Girders Strengthened with CFRP Materials
  82. Altmetric Badge
    Chapter 101 Development of New FRP Reinforcement for Optimized Concrete Structures
  83. Altmetric Badge
    Chapter 102 Anchorage Systems Used in FRP Strengthening of Concrete Members
  84. Altmetric Badge
    Chapter 104 Seismic Performance of Reinforced Concrete Columns in Corrosive Environment
  85. Altmetric Badge
    Chapter 105 Damage Evaluation of Concrete Under Cyclic Loading by Crack Observation
  86. Altmetric Badge
    Chapter 107 Fatigue of Semi-precast Slabs with Lattice Girders
  87. Altmetric Badge
    Chapter 108 Definition of Loading Rate for the Experimental and Numerical Investigation of Reinforcement’s Bond in Concrete Under Impact Loading
  88. Altmetric Badge
    Chapter 109 Required Thickness of Flexurally Rigid Baseplate for Anchor Fastenings
  89. Altmetric Badge
    Chapter 110 Experimental Research and Modelling of Corbel Strengthened by Steel Accessory
  90. Altmetric Badge
    Chapter 112 Behavior of Anchorages with Supplementary Reinforcement Under Tension or Shear Forces
  91. Altmetric Badge
    Chapter 113 Analytical Model for Anchorages with Supplementary Reinforcement Under Tension or Shear Forces
  92. Altmetric Badge
    Chapter 114 Experimental Assessment of an Innovative Beam to Column Connection
  93. Altmetric Badge
    Chapter 115 Headed Bar Connections Between Precast Concrete Panels Loaded in Bending
  94. Altmetric Badge
    Chapter 116 The Concept of Determining the Effective Strength of Joint Concrete in the Analysis of Internal and Edge Columns Intersected by Weaker Slab Concrete
  95. Altmetric Badge
    Chapter 117 RC Fiber-Based Beam-Column Element with Flexure-Shear-Torsion Interaction
  96. Altmetric Badge
    Chapter 118 Experimental Analysis on the Cyclic Performance of Bolted Precast Connections
  97. Altmetric Badge
    Chapter 120 Seismic Performance of Column-Foundation-Joints with Post-installed Rebar Connections: Pre-test Simulations
  98. Altmetric Badge
    Chapter 121 Assessment of Lightweight Concrete-to-Concrete Interface Shear Resistance
  99. Altmetric Badge
    Chapter 122 Interaction of Polymer Flexible Joint with Concrete Elements in an Uniaxial Tensile Test
  100. Altmetric Badge
    Chapter 123 Numerical Investigation on Shear Mechanical Performance of Immersion Joint
  101. Altmetric Badge
    Chapter 124 A Design Method for Walls with Encased Steel Profiles
  102. Altmetric Badge
    Chapter 125 Experimental Study Regarding Shear Behavior of Concrete Walls Reinforced by Multiple Steel Profiles
  103. Altmetric Badge
    Chapter 126 Transfer of the Longitudinal Shear at the Steel-Concrete Interface in Concrete Members Reinforced by Steel Profiles
  104. Altmetric Badge
    Chapter 127 Testing and Design of Shear Capacity of Hollowcore Slabs with Structural Topping
  105. Altmetric Badge
    Chapter 128 Shear Capacity of Slabs with Voiding Elements
  106. Altmetric Badge
    Chapter 129 Experimental and Numerical Studies on Shear Behavior of Deep Prestressed Concrete Hollow Core Slabs
  107. Altmetric Badge
    Chapter 130 Hollow Core Concrete Shells for Large Aperture Parabolic Troughs
  108. Altmetric Badge
    Chapter 131 The Effect of Fire on Floor Slabs Containing Enclosed Cavities - Gently Touched or Fully Explored?
  109. Altmetric Badge
    Chapter 133 Macro-Kinematic Approach for Shear Behaviour of Short Coupling Beams with Conventional Reinforcement
  110. Altmetric Badge
    Chapter 134 Influence of Shear on Deformations of Coupling Beams
  111. Altmetric Badge
    Chapter 135 Nonlinear Analysis of Reinforced Concrete Structure by ECOV Method in SLS and ULS
  112. Altmetric Badge
    Chapter 136 Automatic Reinforcement Method Using NLFEA
  113. Altmetric Badge
    Chapter 137 Simple to Advanced Finite Element Shape Modelling with DIANA
  114. Altmetric Badge
    Chapter 138 Modelling Structural Concrete with Strut-and-Tie Model Combined with 2D Finite Elements - A Model Factor for the Assessment of Strut-and-Tie Models
  115. Altmetric Badge
    Chapter 141 Study on the Design of an Extradosed and Suspension Hybrid Bridge with 800 m Span of Butterfly Web Girder
  116. Altmetric Badge
    Chapter 142 Design Criteria for Piers of Semi-integral Bridges: Investigations on Normal Force and Reinforcement Ratio
  117. Altmetric Badge
    Chapter 143 Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression
  118. Altmetric Badge
    Chapter 144 Towards Mixed-Type Modelling of Structures with Slender and Deep Beam Elements
  119. Altmetric Badge
    Chapter 146 Full-Scale Model Test of Prestressed Segmental Precast Continuous Girder Bridge
  120. Altmetric Badge
    Chapter 147 Early Strength of Shotcrete for Tunnel Advances – New Monitoring Approach Using Thermal Imaging
  121. Altmetric Badge
    Chapter 148 Data Assimilation with Hygro-Mechanistic Model and Non Destructive Inspections for Fatigue Life Prediction of RC Bridge Decks
  122. Altmetric Badge
    Chapter 149 Geotechnical and Structural Applications of Fiber-Optic Sensing
  123. Altmetric Badge
    Chapter 151 Experimental and Theoretical Diagnostics of Defects in Ferroconcrete Piles Based on Reflection of Longitudinal and Transverse Waves
  124. Altmetric Badge
    Chapter 152 Design of Joint Sections of a Steel-Concrete Composite Bridge
  125. Altmetric Badge
    Chapter 153 The SMARTCOCO Project: A Research Push for Hybrid Structures
  126. Altmetric Badge
    Chapter 154 Inelastic Assessment of Hybrid RC Beams to Steel Column Configurations Using Structural Steel Shear-Keys
  127. Altmetric Badge
    Chapter 155 Behavior of a New Type of Shear Connector for U-Shaped Steel-Concrete Hybrid Beams
  128. Altmetric Badge
    Chapter 156 Numerical Simulation of Compressive Failure Behaviors of Concrete-Filled Steel Tube Using Coupled Discrete Model and Shell Finite Element
  129. Altmetric Badge
    Chapter 157 Concrete Confinement and Degree of Shear Connection Effects in Hybrid Column Design
  130. Altmetric Badge
    Chapter 158 Effects of Soil-Structure in High-Rise Buildings by Means of Dimensionless Analysis and a Simplified Model
  131. Altmetric Badge
    Chapter 159 Computational Modeling of Soil-Structure Interaction Towards Reduced Concrete Foundation Volume for Tall Wind Turbine Towers
  132. Altmetric Badge
    Chapter 160 Active Crack Control in Continuously Reinforced Concrete Pavements (CRCP)
  133. Altmetric Badge
    Chapter 161 Temperature Effects on the Fatigue Resistance of High-Strength-Concrete and High-Strength-Grout
  134. Altmetric Badge
    Chapter 162 Numerical Model to Determine Shear Capacity of Reinforced Concrete Deep Beams Exposed to Fire
  135. Altmetric Badge
    Chapter 164 Tools for the Fire Design of Concrete Columns Using EN 1992-1-2 Method A
  136. Altmetric Badge
    Chapter 165 Dust Explosion of RC Silos
  137. Altmetric Badge
    Chapter 166 Fatigue Loading Tests of Concrete Railway Sleepers
  138. Altmetric Badge
    Chapter 167 Bond Tests Under High Loading Rates
  139. Altmetric Badge
    Chapter 168 Non-destructive Testing of Protective Components After Contact Detonation
  140. Altmetric Badge
    Chapter 171 The PACE-1450 Experiment – Investigations Regarding Crack and Leakage Behaviour of a Pre-stressed Concrete Containment
  141. Altmetric Badge
    Chapter 173 Advances in Non-linear Time History and Modal Response Spectrum Analyses for the Seismic Assessment of Buildings in Groningen (Netherlands)
  142. Altmetric Badge
    Chapter 174 An Interesting Case of a Residential Building Affected by an Accidental Load
  143. Altmetric Badge
    Chapter 175 UHPC Pedestrian Bridges and Measured Human Induced Vibrations
  144. Altmetric Badge
    Chapter 177 Determination of Loading Protocol and Stop Criteria for Proof Loading with Beam Tests
  145. Altmetric Badge
    Chapter 180 ACI 562-16 – The ACI Concrete Repair Code
  146. Altmetric Badge
    Chapter 182 Comparison Between Punching Shear Capacity of PT and RC Slabs According to Different Design Codes
  147. Altmetric Badge
    Chapter 183 fib Report on Design of Concrete Members Strengthened with Externally Applied Reinforcement
  148. Altmetric Badge
    Chapter 184 French Standards for Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC)
  149. Altmetric Badge
    Chapter 185 Evaluation of Current Crack Width Calculation Methods According to Eurocode 2 and fib Model Code 2010
  150. Altmetric Badge
    Chapter 186 A Comparative Design of a Multi-story Reinforced Concrete Building with Reentrant Corner Irregularity According to Turkish, Eurocode and ACI 318 Standards
  151. Altmetric Badge
    Chapter 187 An Innovative Conformity Criterion for Assessment of the Concrete Strength Under Uncertainty Conditions
  152. Altmetric Badge
    Chapter 189 Aspects of Implementation into Practice of the Optimization Strength Theory of RC Elements
  153. Altmetric Badge
    Chapter 190 Uncertainties of Crack Width Models
  154. Altmetric Badge
    Chapter 191 A Parametric Study on Concrete Columns Exposed to Biaxial Bending at Elevated Temperatures Using a Probabilistic Analysis
  155. Altmetric Badge
    Chapter 192 Predicting Service Life of Chimneys and Cooling Towers Based on Monitoring
  156. Altmetric Badge
    Chapter 193 Reliability Assessments of Large Reinforced Concrete Structures Using Non-linear Finite Element Analyses: Challenges and Solutions
  157. Altmetric Badge
    Chapter 194 Application of Rational Methods for the Selection of the Most Plausible FE Models in Structural Analysis
  158. Altmetric Badge
    Chapter 195 Structural Performance Assessment of Bridge’s Girder Using Image Measurement System and Finite Element Analysis
  159. Altmetric Badge
    Chapter 196 Assessing the Life Cycle of Existing Maritime Structures – Application to a Harbour Bridge in Porto Port
  160. Altmetric Badge
    Chapter 198 Safety Levels in Concrete Slabs-on-Grade
  161. Altmetric Badge
    Chapter 200 Effect of Reinforcement Detailing on Catenary Action in 2-D RC Frame
  162. Altmetric Badge
    Chapter 202 Design Compressive Strength Values of Concrete Under Sustained Loads
  163. Altmetric Badge
    Chapter 203 Partial Safety Factor for the Residual Flexural Strength of FRC Precast Concrete Segments
  164. Altmetric Badge
    Chapter 204 Nonlinear Dynamic Analysis of Ultra-High Voltage Electrical Equipment with Base Isolation
  165. Altmetric Badge
    Chapter 205 Resistance of Prestressed Concrete Structures to Fatigue in Domain of Endurance Limit
  166. Altmetric Badge
    Chapter 206 Practical Bond Model for Corroded RC Bridges
  167. Altmetric Badge
    Chapter 207 Structural Assessment of an Existing Concrete Box-Girder Bridge, According to the German and the Dutch Standards
  168. Altmetric Badge
    Chapter 208 Evaluation of Remained Fatigue Life of Expressway Reinforced Concrete Slab Strengthened by Steel Plate Adhesion Method
  169. Altmetric Badge
    Chapter 209 Bridge Reassessments – Realistic Shear Capacity Evaluation Using Arch Action Model
  170. Altmetric Badge
    Chapter 210 Life Cycle Cost, As a Tool for Decision Making on Concrete Infrastructures
  171. Altmetric Badge
    Chapter 211 Residual Service Life of Existing Concrete Structures – Is it Useful in Practice?
  172. Altmetric Badge
    Chapter 213 Reliability of Non-destructive Testing Methods by Detecting the Presence of Reinforcement in Existing Concrete Structures
  173. Altmetric Badge
    Chapter 214 Long-Term Performance of External Bonding Under Moisture and Temperature Effects
  174. Altmetric Badge
    Chapter 215 Project OV-SAAL Cluster A: Widen an Existing Deck and Analyze Different Type of Joints
  175. Altmetric Badge
    Chapter 216 Elevation and Refurbishment of 4 Lock Bridges on the Albert Canal in Belgium
  176. Altmetric Badge
    Chapter 217 Numerical Simulations of a Concrete Bridge Deck Loaded to Shear Failure
  177. Altmetric Badge
    Chapter 218 Development of a Smart Key Performance Indicator for In-Situ Load Tests
  178. Altmetric Badge
    Chapter 219 Full-Scale Tests to Failure Compared to Assessments – Three Concrete Bridges
  179. Altmetric Badge
    Chapter 220 Load Testing of Concrete Structures in Germany – General Practice and Recent Developments
  180. Altmetric Badge
    Chapter 221 Modifying and Renovating the 75 Year Old Maastunnel to Meet with Modern Standards
  181. Altmetric Badge
    Chapter 222 Restoration of Joban Line Railway Facilities Damaged by Tohoku-Pacific Ocean Earthquake
  182. Altmetric Badge
    Chapter 223 Repair Strategy of the Deteriorated Immersed Maastunnel
  183. Altmetric Badge
    Chapter 224 Investigations on the Strengthening of Existing Highway Bridges Under Shear and Flexural Loading with Textile Reinforced Mortar
  184. Altmetric Badge
    Chapter 226 Existing Large and Thin Concrete Slab Damaged by Multiple Cracks Almost Pierced. Expertise, Diagnosis, Strengthening, Behavior and Control After Execution
  185. Altmetric Badge
    Chapter 227 Structural Improvement of the Construction Joint of the Cut and Cover Tunnels
  186. Altmetric Badge
    Chapter 228 Post-tensioning Systems for the Strengthening of Structures
  187. Altmetric Badge
    Chapter 229 Strengthening of 100 Year Old Concrete Arch Bridge ‘Kuhbrücke/Hildesheim’
  188. Altmetric Badge
    Chapter 230 Effectiveness of S-FRCM Strengthening System Applied with Two Different Techniques
  189. Altmetric Badge
    Chapter 231 A Study of Test Methods on Alkaline Resistance and Creep Characteristic for Post-installed Bonded Anchors
  190. Altmetric Badge
    Chapter 232 Experimental Study on Anticorrosive Effect of New Developed Sacrificial Point Anode Method
  191. Altmetric Badge
    Chapter 233 The Influence of Calcium Chloride on Flexural Strength of Cement-Based Materials
  192. Altmetric Badge
    Chapter 234 Evaluation and Practical Implementation of Probabilistic Calculations of Chloride Penetration for Belgian Concretes in the Framework of a Durable Design
  193. Altmetric Badge
    Chapter 235 Toward Performance Specifications for Concrete: Linking Resistivity, RCPT and Diffusion Predictions Using the Formation Factor for Use in Specifications
  194. Altmetric Badge
    Chapter 236 Accelerated Testing for Chloride Threshold of Reinforcing Steel in Concrete
  195. Altmetric Badge
    Chapter 237 A Proposal for Determining the Remaining Time to Chloride Induced Corrosion Initiation of Existing Reinforced Concrete Structures
  196. Altmetric Badge
    Chapter 238 Investigations on Existing Concrete Cantilever Walls Subjected to Reinforcement Corrosion
  197. Altmetric Badge
    Chapter 239 Optimization of Corrosion Countermeasures for Chloride Attacked RC Bridge Piers in a Strengthening Project
  198. Altmetric Badge
    Chapter 240 Corrosion Risk of Patch Repaired Reinforced Concrete Elements Under Influence of Internal Chloride Ions
  199. Altmetric Badge
    Chapter 241 Influence of Crack Spacing on Corrosion Rate in Reinforced Concrete
  200. Altmetric Badge
    Chapter 242 Influence of Rebar Corrosion on RC Frame Push-Over Response
  201. Altmetric Badge
    Chapter 243 Impact of Cyclic Loading and Corrosion on the Deflections of Reinforced Concrete Beams
  202. Altmetric Badge
    Chapter 244 New Russian Norms and Codes on Protection of Building Structures Against Corrosion
  203. Altmetric Badge
    Chapter 245 Fatigue Model for the Structural Integrity Evaluation Applied to a Wind Turbine Concrete Shaft, Considering Corrosion and Freeze and Thaw Degradation
  204. Altmetric Badge
    Chapter 247 A New Efficient and Safe Admixture for Freeze/Thaw Resistant Concrete
  205. Altmetric Badge
    Chapter 248 Study on Renewal Method from Deteriorative RC Slab to Precast PC Slab in the Steel Girder Bridge
  206. Altmetric Badge
    Chapter 249 Effect of Pozzolanic Reactivity of Volcanic Ash in Hokkaido on the Durability of Volcanic Ash Concrete
  207. Altmetric Badge
    Chapter 250 Durability and Bond of Reinforced Lightweight Foamed Concrete
  208. Altmetric Badge
    Chapter 251 Generic Modelling of Propagation of Reinforced Concrete Damage
  209. Altmetric Badge
    Chapter 252 Mechanical Properties and Chloride Ion Penetration of Alkali Activated Slag Concrete
  210. Altmetric Badge
    Chapter 253 Natural Carbonation of Alkali-Activated Fly Ash and Slag Pastes
  211. Altmetric Badge
    Chapter 254 The Reference Approach to Service Life Design
  212. Altmetric Badge
    Chapter 255 Service Life Modelling for Chloride Ingress in Reinforced Concrete
  213. Altmetric Badge
    Chapter 256 Influence of Aggregates Porosity on Concrete Overall Durability – Outcomes of Investigations Carried Out for the New Coastal Road on La Reunion Island Major Project
  214. Altmetric Badge
    Chapter 258 PERFDUB: A New French Research Project on Performance-Based Approach for Justifying Concrete Structures Durability
  215. Altmetric Badge
    Chapter 259 Maintenance and Repair of Concrete Structures of Le Havre, the City Rebuilt by Perret, Inscribed to the World Heritage List
  216. Altmetric Badge
    Chapter 264 Wear Resistance of Concrete Floors: Drafting the Guidelines for Concrete Design and Surface Finishings
  217. Altmetric Badge
    Chapter 265 Geopolymer Concrete Ready Mixed: A Challenge!
  218. Altmetric Badge
    Chapter 268 Experimental Setup for Measuring Long-Term Behavior of Green Reinforced Concrete Beams
  219. Altmetric Badge
    Chapter 269 Sustainability of Thermally-Activated Precast Concrete Hollowcore-Floor Systems
  220. Altmetric Badge
    Chapter 271 Sustainability and Durability of Concrete in Large Infrastructure Projects of Rijkswaterstaat (The Netherlands)
  221. Altmetric Badge
    Chapter 273 Inelastic Behaviour of RC Members Incorporating High Deformability Concrete
  222. Altmetric Badge
    Chapter 274 Experimental Study on the M-V Interaction of a Hybrid Steel Connection Used in Concrete Floor-to-Balcony Junction
  223. Altmetric Badge
    Chapter 275 Experimental Investigation of Hollow Core Slabs Made of UHPC – Fibres Orientation
  224. Altmetric Badge
    Chapter 278 Prefabricated Tendons in Belgium and the Netherlands - Value-Add for All Involved Parties
  225. Altmetric Badge
    Chapter 279 High Tensile Bond Anchorage for Post-tensioning Bar Tendon Systems
  226. Altmetric Badge
    Chapter 280 Design and Fabrication of Prestressed Concrete Box Girder Bridge with U-Shaped Segments
  227. Altmetric Badge
    Chapter 281 Wound FRP for Concrete Beams with Optimised Geometries
  228. Altmetric Badge
    Chapter 282 A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
  229. Altmetric Badge
    Chapter 283 3D Printing Concrete with Reinforcement
  230. Altmetric Badge
    Chapter 284 Case-Study on the Application of Precast Double-Curved Concrete Elements for the Green Planet Shell Structure
  231. Altmetric Badge
    Chapter 287 Deliberate Deformation of Concrete in the Fresh State - Crack Risk and Efficient Production of Curved Precast Elements
  232. Altmetric Badge
    Chapter 288 Extremely Light and Slender Precast Pedestrian-Bridge Made Out of Textile-Reinforced Concrete (TRC)
  233. Altmetric Badge
    Chapter 289 Potentials of Textile Reinforced Concrete for Lightweight Noise Protection Walls
  234. Altmetric Badge
    Chapter 291 Marine Concrete Structures for the Future
  235. Altmetric Badge
    Chapter 294 Comparison of Balanced Lift and Balanced Cantilever Method for the San Leonardo Viaduct
  236. Altmetric Badge
    Chapter 295 Steel- Concrete- Composite Bridges with Innovative Prefabricated Slab Elements
  237. Altmetric Badge
    Chapter 296 Implementation of a Global Durability Approach in Close Cooperation Between Owner/Engineer, Designers and Contractor’s Joint-Ventures for the New Coastal Road on Reunion Island (France)
  238. Altmetric Badge
    Chapter 297 Adapting a Railway Bridge to Allow for 10 m  of Excavation Around Raft Foundations While not Disrupting Railway Traffic
  239. Altmetric Badge
    Chapter 298 Recent Developments in Concrete Arch Bridges
  240. Altmetric Badge
    Chapter 299 Construction of an Arch Bridge by Lowering Method
  241. Altmetric Badge
    Chapter 301 Steel-Concrete Composite Flat Arch Bridge
  242. Altmetric Badge
    Chapter 303 The UHPC Catharinabridge in Leiden
  243. Altmetric Badge
    Chapter 306 Intricate and Challenging Projects in Prefabricated Concrete
  244. Altmetric Badge
    Chapter 307 Design Process of a 3D-Printed Concrete Water Taxi Stop
  245. Altmetric Badge
    Chapter 308 Coloured Self-compacting Concrete for the New Train Station in Herstal, Belgium – A Case Study
  246. Altmetric Badge
    Chapter 309 Legolizing Infrastructure
  247. Altmetric Badge
    Chapter 310 From 1P to 4P - Innovative Solutions in Precast Prestressed Concrete Viaducts
  248. Altmetric Badge
    Chapter 311 The Combined Bypass Railway and Tangent Road Project Near the Station of Mechelen (Belgium)
  249. Altmetric Badge
    Chapter 312 Bridge Collision Protection Ramp – Kampen – The Netherlands
  250. Altmetric Badge
    Chapter 314 Quasi-Rectangular Shield Tunneling Technology in the Ningbo Rail Transit Project
  251. Altmetric Badge
    Chapter 315 The Search for Affordable Cement and Concrete in the 18th and 19th Century
  252. Altmetric Badge
    Chapter 316 The Invention of Reinforced Concrete (1848 – 1906)
  253. Altmetric Badge
    Chapter 318 Contemporary Analysis and Numerical Simulation of Revisited Long-Term Creep Tests on Reinforced Concrete Beams from the Sixties
  254. Altmetric Badge
    Chapter 319 The Hoyer-System – A Forgotten Pre-stressed Concrete System up to Date Again
  255. Altmetric Badge
    Chapter 320 Self-anchored Suspension Bridges with Prestressed Concrete Deck: Some Historic Examples
  256. Altmetric Badge
    Chapter 321 The Reconstruction of Le Havre: A Cross-Disciplinary View
  257. Altmetric Badge
    Chapter 322 Exporting Prestressed Concrete to Africa. The Construction of the Bata 300 Shoe Factory in Kinshasa, DR CongSo, 1962–1965
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
6 X users
patent
4 patents
facebook
2 Facebook pages
wikipedia
2 Wikipedia pages

Citations

dimensions_citation
63 Dimensions

Readers on

mendeley
370 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
High Tech Concrete: Where Technology and Engineering Meet
Published by
Springer International Publishing, January 2018
DOI 10.1007/978-3-319-59471-2
ISBNs
978-3-31-959471-2, 978-3-31-959470-5
Authors

Van Mullem, Tim, Reybrouck, Nicky, Criel, Pieterjan, Taerwe, Luc, Caspeele, Robby, Matthys, Stijn, Triantafillou, Thanasis

Editors

D.A. Hordijk, M. Luković

X Demographics

X Demographics

The data shown below were collected from the profiles of 6 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 370 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
France 1 <1%
Unknown 369 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 86 23%
Student > Master 58 16%
Student > Doctoral Student 32 9%
Student > Bachelor 29 8%
Researcher 22 6%
Other 39 11%
Unknown 104 28%
Readers by discipline Count As %
Engineering 200 54%
Materials Science 11 3%
Design 6 2%
Agricultural and Biological Sciences 4 1%
Chemistry 4 1%
Other 20 5%
Unknown 125 34%