↓ Skip to main content

Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS)

Overview of attention for book
Cover of 'Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS)'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Hydro-mechanical Behaviour of Unsaturated Argillaceous Rocks
  3. Altmetric Badge
    Chapter 2 Plastic Deformations of Unsaturated Fine-Grained Soils Under Cyclic Thermo-Mechanical Loads
  4. Altmetric Badge
    Chapter 3 Shale Capillarity, Osmotic Suction and Permeability, and Solutions to Practical Testing Issues
  5. Altmetric Badge
    Chapter 4 Modelling the Mechanical Behaviour of Callovo-Oxfordian Argillite. Formulation and Application
  6. Altmetric Badge
    Chapter 5 Intrinsic and State Parameters Governing the Efficiency of Bentonite Barriers for Contaminant Control
  7. Altmetric Badge
    Chapter 6 Multiscale Approach to Micro-Poro-Mechanical Modelling of Unsaturated Shales
  8. Altmetric Badge
    Chapter 7 Measurement of Supercritical CO2 Permeability in Porous Rock at Reservoir Conditions
  9. Altmetric Badge
    Chapter 8 Measurement of Mechanical Properties of Thin Clay Films and Comparison with Molecular Simulations
  10. Altmetric Badge
    Chapter 9 Advanced Meso-Scale Modelling to Study the Effective Thermo-Mechanical Parameter in Solid Geomaterial
  11. Altmetric Badge
    Chapter 10 Identification of Local Mechanisms in Clays and Energy-Based Modelling
  12. Altmetric Badge
    Chapter 11 Coupled Membrane and Diffusion Testing of Active Clays for Barrier Applications
  13. Altmetric Badge
    Chapter 12 Evidences of the Effects of Free Gas on the Hydro-mechanical Behaviour of Peat
  14. Altmetric Badge
    Chapter 13 Use of Psychrometers, Capacitive Sensors and Vapour Transfer Technique to Determine the Water Retention Curve of Compacted Bentonite
  15. Altmetric Badge
    Chapter 14 Water Content Effect on the Fault Rupture Propagation Through Wet Soil-Using Direct Shear Tests
  16. Altmetric Badge
    Chapter 15 Specimen Preparation Techniques for Testing Fully and Partially Saturated Sands in Dynamic Simple Shear (DSS) Test Device with Confining Pressure
  17. Altmetric Badge
    Chapter 16 Measurement of Vertical Strain of Compacted Bentonite Subjected to Hydration Effort on Creep Test
  18. Altmetric Badge
    Chapter 17 Response of Clay Rock to Moisture Change
  19. Altmetric Badge
    Chapter 18 Volumetric Behaviour of Lime Treated High Plasticity Clay Subjected to Suction Controlled Drying and Wetting Cycles
  20. Altmetric Badge
    Chapter 19 Crack Initiation and Propagation of Clays Under Indirect Tensile Strength Test by Bending Related to the Initial Suction
  21. Altmetric Badge
    Chapter 20 Evaluation of the Instantaneous Profile Method for the Determination of the Relative Permeability Function
  22. Altmetric Badge
    Chapter 21 A Double Cell Triaxial Apparatus for Testing Unsaturated Soil Under Heating and Cooling
  23. Altmetric Badge
    Chapter 22 A Suction- and Temperature-Controlled Oedometric Device
  24. Altmetric Badge
    Chapter 23 Acoustic Emission Technology to Investigate Internal Micro-Structure Behaviour of Shear Banding in Sands
  25. Altmetric Badge
    Chapter 24 Direct and Indirect Local Deformations of Sand in Undrained Cyclic Triaxial Tests by Image Analysis Technique
  26. Altmetric Badge
    Chapter 25 A New Laboratory Setup for Phase Equilibria Studies of Methane Hydrate in Porous Media
  27. Altmetric Badge
    Chapter 26 An Experimental Platform for Measuring Soil Water Characteristic Curve Under Transient Flow Conditions
  28. Altmetric Badge
    Chapter 27 Determining Fluid Compressibility and Soil Permeability of Quasi Saturated Sand with the Alternating Flow Apparatus
  29. Altmetric Badge
    Chapter 28 Effect of Specimen Confinement Method on Simple Shear Test of Clay
  30. Altmetric Badge
    Chapter 29 Fractal Analysis of the Progressive Failure of Shales and Stiff Clays Under Shear
  31. Altmetric Badge
    Chapter 30 Recent Developments in Measurement and Use of Fully Softened Shear Strength in the USA
  32. Altmetric Badge
    Chapter 31 Chemical Influence of Pore Pressure on Brine Flow in Clay-Rich Material
  33. Altmetric Badge
    Chapter 32 Development of Classification Charts for Q Index of Shale from the Parameters
  34. Altmetric Badge
    Chapter 33 Exploring Fissure Opening and Their Connectivity in a Cenozoic Clay During Gas Injection
  35. Altmetric Badge
    Chapter 34 Profiling the In Situ Compressibility of Cretaceous Shale Using Grouted-in Piezometers and Laboratory Testing
  36. Altmetric Badge
    Chapter 35 Influence of Surface Roughness of the Fracture on Hydraulic Characteristics of Rock Mass
  37. Altmetric Badge
    Chapter 36 The Role of Anisotropy on the Volumetric Behaviour of Opalinus Clay upon Suction Change
  38. Altmetric Badge
    Chapter 37 1D Compression Behaviour of Opalinus Clay
  39. Altmetric Badge
    Chapter 38 Consolidated-Undrained Triaxial Test Results of Opalinus Clay and Comparison with Caprock Shales
  40. Altmetric Badge
    Chapter 39 One Dimensional Consolidation of Opalinus Clay from Shallow Depth
  41. Altmetric Badge
    Chapter 40 Lessons Learned from Electron Microscopy of Deformed Opalinus Clay
  42. Altmetric Badge
    Chapter 41 The Rock Mechanical Behavior of Opalinus Clay – 20 Years of Experience in the Mont Terri Rock Laboratory
  43. Altmetric Badge
    Chapter 42 Cyclic Testing on Low-Density Chalk
  44. Altmetric Badge
    Chapter 43 Long Duration Oedometric Tests to Analyse the Creep Behaviour of Lacustrine Sediments
  45. Altmetric Badge
    Chapter 44 Deep Soil Mixing Method for the Bio-cement by Means of Bender Element Test
  46. Altmetric Badge
    Chapter 45 Studying of Shale Organic Matter Structure and Pore Space Transformations During Hydrocarbon Generation
  47. Altmetric Badge
    Chapter 46 On the Application of Microbially Induced Calcite Precipitation for Soils: A Multiscale Study
  48. Altmetric Badge
    Chapter 47 Determination of Intergranular Strain Parameters and Their Dependence on Properties of Grain Assemblies
  49. Altmetric Badge
    Chapter 48 Experimental and Numerical Study of the Thermo-Mechanical Behaviour of Energy Piles for Belgian Practice
  50. Altmetric Badge
    Chapter 49 Drained and Undrained Analysis for Foundations Based on Triaxial Tests
  51. Altmetric Badge
    Chapter 50 Impact of Thermally Induced Soil Deformation on the Serviceability of Energy Pile Groups
  52. Altmetric Badge
    Chapter 51 Numerical Analysis of Seismic Soil-Pile-Structure Interaction in Soft Soil with Strong Nonlinearity and Its Validation by 1g Shaking Table Test
  53. Altmetric Badge
    Chapter 52 On the Interface Shearing Behavior Between Granular Soil and Artificial Rough Surfaces
  54. Altmetric Badge
    Chapter 53 Constitutive Framework for Unsaturated Soils with Differentiation of Capillarity and Adsorption
  55. Altmetric Badge
    Chapter 54 Coupled Analysis of CO2 Injection Induced Stress Variation in the Caprock
  56. Altmetric Badge
    Chapter 55 Efficient Parameter Identification for THM Behaviour of Claystone Using Optimization Methods
  57. Altmetric Badge
    Chapter 56 A Thermodynamic Model for Rate-Dependent Geomaterials
  58. Altmetric Badge
    Chapter 57 Thermo-Viscoplastic Subloading Soil Model for Isotropic Stress and Strain Conditions
  59. Altmetric Badge
    Chapter 58 Numerical Simulation of Multi-phase Flow in CO2 Geological Sequestration
  60. Altmetric Badge
    Chapter 59 Mechanics and Modeling of Cohesive Frictional Granular Materials
  61. Altmetric Badge
    Chapter 60 Numerical Modelling of Liquefaction Tests of Partially Saturated Sands in CSSLB
  62. Altmetric Badge
    Chapter 61 Aspects of Thermal Fracturing of Clays with Electromagnetic Excitation
  63. Altmetric Badge
    Chapter 62 Reproduction of Discrete Element Model by 3D Printing and Its Experimental Validation on Permeability Issue
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
4 X users
facebook
1 Facebook page
wikipedia
2 Wikipedia pages

Citations

dimensions_citation
6 Dimensions

Readers on

mendeley
72 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Laboratory Testing and Modelling of Soils and Shales (ATMSS)
Published by
Springer International Publishing, January 2017
DOI 10.1007/978-3-319-52773-4
ISBNs
978-3-31-952772-7, 978-3-31-952773-4
Editors

Alessio Ferrari, Lyesse Laloui

X Demographics

X Demographics

The data shown below were collected from the profiles of 4 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 72 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Turkey 1 1%
Unknown 71 99%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 24 33%
Researcher 11 15%
Student > Master 10 14%
Student > Doctoral Student 5 7%
Lecturer 3 4%
Other 10 14%
Unknown 9 13%
Readers by discipline Count As %
Engineering 44 61%
Earth and Planetary Sciences 6 8%
Agricultural and Biological Sciences 2 3%
Environmental Science 2 3%
Computer Science 1 1%
Other 4 6%
Unknown 13 18%