↓ Skip to main content

Advancement in Materials, Manufacturing and Energy Engineering, Vol. II

Overview of attention for book
Cover of 'Advancement in Materials, Manufacturing and Energy Engineering, Vol. II'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Investigation of Rare Earth Element Inclusion on the Structural and Magnetic Properties of Barium Ferrites
  3. Altmetric Badge
    Chapter 2 Computational Fluid Dynamic Analysis of Cyclone Separator for Flue Gas Cleaning by Using Standard k-Epsilon Model
  4. Altmetric Badge
    Chapter 3 Identification of Lubricant Contamination in Journal Bearings Using Vibration Signature Analysis
  5. Altmetric Badge
    Chapter 4 Mechanical Alloying of γ TiAl-Based Powder of Ti–46Al–1B (at%) Composition
  6. Altmetric Badge
    Chapter 5 A Review on Development and Applications of Solar Dish Stirling System
  7. Altmetric Badge
    Chapter 6 Physical Properties of Amorphous Nanosilica from Rice Husk (Agriculture Waste) and PVA Composite, Prepared Using Green Approach for Its Applications
  8. Altmetric Badge
    Chapter 7 Antibacterial Property of Biologically Synthesized Iron Nanoparticles Against Staphylococcus aureus
  9. Altmetric Badge
    Chapter 8 Fabrication of Composite Phase Change Material: A Critical Review
  10. Altmetric Badge
    Chapter 9 Air Quality Assessment During Lockdown for Jaipur City
  11. Altmetric Badge
    Chapter 10 Micellar Potentiometric Determination of Stability Constant and Antibacterial Investigations on Complexes of Cu (II) with 3, 4, 5-Trimethoxybenzaldehyde Thiosemicarbazone
  12. Altmetric Badge
    Chapter 11 Aging of a Thermoplastic Polymer Under the Combined Effect of Ultraviolet Ray and Temperature
  13. Altmetric Badge
    Chapter 12 Effects of Additives and Treatment on Fly Ash-Based Polymer Composites
  14. Altmetric Badge
    Chapter 13 Powder Mixed Electrical Discharge Machining of EN 31 Steel
  15. Altmetric Badge
    Chapter 14 Simulation and Analysis of Hybrid Energy Resources in Chennai Using Homer Software
  16. Altmetric Badge
    Chapter 15 EDM Process Optimization of Machining Parameters for Through Hole Making on HCHCR AISI-D7 Steel Using RSM
  17. Altmetric Badge
    Chapter 16 Improving the Performance of Supply Chain Through Industry 4.0 Technologies
  18. Altmetric Badge
    Chapter 17 Significant Applications of Composite and Natural Materials for Vibration and Noise Control: A Review
  19. Altmetric Badge
    Chapter 18 Digital Management Systems in Manufacturing Using Industry 5.0 Technologies
  20. Altmetric Badge
    Chapter 19 Mathematical and Computational Analysis of Shell and Tube Heat Exchanger on Varying Tube Patterns in Excel © and Ansys ©
  21. Altmetric Badge
    Chapter 20 Design Analysis of Robotic Arm
  22. Altmetric Badge
    Chapter 21 Pine Oil Extraction and Characteristics of Engine Using Pine Oil
  23. Altmetric Badge
    Chapter 22 Microstructure Tribological Characterization of Copper Metal Matrix Reinforced with Cerium Oxide
  24. Altmetric Badge
    Chapter 23 Investigation on Vibration of Crankshaft in Reciprocating Engine
  25. Altmetric Badge
    Chapter 24 Comparative Thermodynamic Analysis of Simple Gas Turbine Fueled with Renewable Fuel
  26. Altmetric Badge
    Chapter 25 Solar Thermal Receivers—A Review
  27. Altmetric Badge
    Chapter 26 Powder Mixed Electric Discharge Drilling of Aluminum Based Metal Matrix Composite
  28. Altmetric Badge
    Chapter 27 Investigating the Change in Water Characteristics and Scale Formation Under the Varying Turbulent Flow
  29. Altmetric Badge
    Chapter 28 A Study on Post-harvest Loss Reduction with Solar Dryer
  30. Altmetric Badge
    Chapter 29 Energetic and Exergetic Comparison of Opaque and Semi-transparent PVT Arrays Under Natural Convection Mode for Building Integration
  31. Altmetric Badge
    Chapter 30 Fabrication of IoT System for Structural Health Monitoring Considering Maintenance 4.0
  32. Altmetric Badge
    Chapter 31 Effect of Biodiesel on Engine Performance and Emissions
  33. Altmetric Badge
    Chapter 32 Jatropha: A Sustainable Source of Transportation Fuel in India
  34. Altmetric Badge
    Chapter 34 Design and Simulation Study of a Piezoelectric Microcantilever-Based Energy Harvester for Ambient Vibrations
  35. Altmetric Badge
    Chapter 35 Utilization of Local Riverbed Sand in Green Sand Mould Casting—A Study
  36. Altmetric Badge
    Chapter 36 Ferrochrome Slag as an Alternative Mould Material for Green Sand Mould Casting—A Study
  37. Altmetric Badge
    Chapter 37 Evaluation of Compactibility and Shear Strength of Sand-Less Casting Mould for Sand Casting Process
  38. Altmetric Badge
    Chapter 38 A Study on the Design and Fabrication of Dry Cell Electrolysis Setup for Hydrogen Generation
  39. Altmetric Badge
    Chapter 39 A Short Review on Biped Robots Motion Planning and Trajectory Design
  40. Altmetric Badge
    Chapter 40 Optimization of Machining Process Parameters Using Grey Fuzzy Method
  41. Altmetric Badge
    Chapter 41 Energy Analysis of R1234yf/R134a as Replacement of R134a in a Domestic Refrigerator
  42. Altmetric Badge
    Chapter 42 Effect of Na 2 O Content on Ground Granulated Blast Furnace Slag Incorporated Fly Ash-Based Geopolymer Pastes
  43. Altmetric Badge
    Chapter 43 Performance and Emissions Characteristics of Diesel Engine Run on Citrullus Colocynthis Biodiesel with Zinc Oxide Additive
  44. Altmetric Badge
    Chapter 44 Performance and Emission Characteristics of Single-Cylinder Diesel Engine Fueled with Biodiesel Derived from Cashew Nut Shell
  45. Altmetric Badge
    Chapter 45 Investigation of Heat Transfer Characteristics in Double Tube Heat Exchanger with Helical Turbulator Using CFD
  46. Altmetric Badge
    Chapter 46 AHP-based Identification of Tools for Sustainable Product Development
  47. Altmetric Badge
    Chapter 47 Design and Optimisation of Annulus Combustion Chamber of Gas Turbine Engine: An Analytical and Numerical Approach
  48. Altmetric Badge
    Chapter 48 Thermo-Economic Optimization of Spiral Plate HX by Means of Gradient and Gradient-Free Algorithm
  49. Altmetric Badge
    Chapter 49 Numerical Investigation to Study the Effect of Inlet Inclination on the Turbulence Intensity of the Naturally Ventilated Room Using CFD
  50. Altmetric Badge
    Chapter 50 Analysis of Solar Photovoltaic-Based Water Pumping System in Sehore, India
  51. Altmetric Badge
    Chapter 51 Vibro-Acoustics of a Mandar
Attention for Chapter 32: Jatropha: A Sustainable Source of Transportation Fuel in India
Altmetric Badge

Mentioned by

news
2 news outlets

Citations

dimensions_citation
14 Dimensions

Readers on

mendeley
3 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
Jatropha: A Sustainable Source of Transportation Fuel in India
Chapter number 32
Book title
Advancement in Materials, Manufacturing and Energy Engineering, Vol. II
Published by
Springer, Singapore, January 2022
DOI 10.1007/978-981-16-8341-1_32
Book ISBNs
978-9-81-168340-4, 978-9-81-168341-1
Authors

Chamola, Rahul, Kumar, Nitin, Jain, Siddharth

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 3 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 3 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 1 33%
Unknown 2 67%
Readers by discipline Count As %
Environmental Science 1 33%
Engineering 1 33%
Unknown 1 33%